Investment Opportunities & Business Ideas in Nigeria, West Africa - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 11 of 92 | Total 919 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 91 92   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

DEXTRIN FROM STARCH - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Dextrin is a starch derivative. It is also known as water soluble carbo hydrate produced by heat and acid depolymerization. Dextrin are made by heating with or without the addition of chemical reagents. The resultant pyrodextrines are classified into three groups, depending upon the amount of modification. Dextrines or British gums are used in a great variety of adhesive application. Their paste are used for envelope and labeling adhesives, as adhesive for postage stamps gummed tape and card board boxes. It is also used in the manufacture of bottled gum, machine labeling paste, poster gumming paste etc. Dextrins manufacturing unit has very good scope for development in the small scale sector and especially in a developing and agriculture based country like ours. There is estimated a gap of 10,000 M.T. per year of dextrin between demand and production. The product is having wide uses in many industries. So, it is clear that this is having good present and future scope so the new entrants can join the industry without any hesitation.
Plant capacity: 10 MT/DayPlant & machinery: 51 Lakhs
Working capital: -T.C.I: 309 Lakhs
Return: 47.00%Break even: 38.00%
Add to Inquiry Add to Inquiry Basket

WHITE OIL FROM KEROSENE OIL - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Deeply refined pale yellow oils are called white oil. In 1934 the white oil manufacturers association (WOMA) divided the white oils in three viscosity grades. The oils of first category are used in the processing of foods, which must not contain more than 0.1-0.6% of the oil. The white oils of the second category can be added to products, which themselves are not foods full tufts but may come into direct contact with foods. It is widely employed in the pharmaceutical, cosmetic and toilet preparation industries. Technical white oils are employed in industries, where highly refined non-medicinal quality oil is required. The use of white oils in the textile industry is important certain high speed sewing machines utilize technical white oils. The demand for white oil is much but the supply of this item is not so much. In future its demand will be more and it would be having a bright future scope.
Plant capacity: 25 MT/DayPlant & machinery: Rs. 950 lakhs
Working capital: N/AT.C.I: Rs. 5 crores
Return: 45.00%Break even: 35.00%
Add to Inquiry Add to Inquiry Basket

GAS FILLING OF L.P.G. CYLINDER - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Bulk petroleum and hydrocarbons generally are most commonly stored in cylindrical tanks of welded steel. For quantities upto about 250 nos. the cylindrical tanks may be carried horizontally to variations in temperatures. L.P.G. is used mainly for cooking purposes in India. It is usually filled in small cylinders to be used in household cooking. It is also used for drying or in industry with oxygen for cutting welding, brazing, heating etc. It is used as industrial fuels, boiler fuels, furnace fuels also as internal combustion engine fuel. At present there are four units in the organized sector manufacturing L.P.G. valves and regulators. There are also many units operating in the small scale sector to manufacture L.P.G. valves and regulators. The future demand for L.P.G. pressure regulators and valves would depend upon L.P.G. cylinders produced and used for domestic purpose. The production of L.P.G. cylinders is estimated to increase at 9 percent per annum. There is good scope for new entrants.
Plant capacity: 10000 /dayPlant & machinery: Rs. 1 crores
Working capital: -T.C.I: Rs. 27 crores
Return: 54.00%Break even: 21.00%
Add to Inquiry Add to Inquiry Basket

CHARCOAL POWDER FROM RICE HUSK - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Charcoal is produced in kilns and retorts. The thermal decomposition of wood in a kiln with a controlled air supply produces charcoal. The gaseous products and some of the wood are burned. Retort charcoal is generated in the absence of air. Originally, charcoal was used as a smokeless, odorless fuel for heating and cooking and it is still used today for these purposes by people in well-wooded underdeveloped countries. Charcoal granules are used as a food additive for domestic animals. It is used for the production of black powder. It is also used in foundries as well as for de-scaling of metal sheets and wires. There is a good scope for new entrants.
Plant capacity: 50 MT/dayPlant & machinery: Rs. 190 lakhs
Working capital: -T.C.I: Rs. 845 lakhs
Return: 53.00%Break even: 33.00%
Add to Inquiry Add to Inquiry Basket

TRADING OF IRON ORES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Steel is considered to be the strongest material in that price. Day to day life and growth of industry and infrastructure in any country totally depends on steel. It is consumed in all spheres of life. It has played major role in the development of major economics like US, EU, Japan and now China. Investment of Rs. 90,000 crores has been made in the steel sector, which is the highest among all industrial sectors in India. Iron ore is used in pigment, polishing compound, metallurgy, magnetic inks and in ferrites for electronic industry, coatings for magnetic tape, catalyst. It is the second most important abundant metal in the earth. The global demand growth rate is estimated as 6%. The anticipated steel demand and per capita consumption in India is expected to double in the next eight years. Even at a conservative growth rate of six percent steel demand in 2012 will be about 50 MT. To looking its demand, the scope for investment in this project is bright.
Plant capacity: 5000 MT/DayPlant & machinery: Rs. 156 lakhs
Working capital: -T.C.I: Rs. 2396 lakhs
Return: 52.00%Break even: 21.00%
Add to Inquiry Add to Inquiry Basket

RECLAMATION OF USED ENGINE OIL - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Engine oil becomes contaminated with foreign material in service. In circulating systems, where a substantial quantity of oil is involved, it is desirable to maintain it as clean as possible to provide maximum working efficiency and to keep wear and damage of lubricated parts to a minimum. Reconditioning of used oil may be accomplished by a continuous by pass or batch methods or combination of these. Engine oil is used in all types of engines with petrol, diesel etc. Used engine oils are generally discarded after a specific period of use. The present oil crisis has led to the development of certain techniques of refining such oil to make them compatible with fresh oil. In our country (India) about 35% of demand is meet by our own production and rest of the demand is meet up by the import only. Hence, It can be concluded that any type of petroleum product can be easily marketed if its selling cost is less than imported one. So it can be predicted that there is good scope for new entrepreneurs in the petroleum base oil product.
Plant capacity: 1 MT/dayPlant & machinery: Rs. 20 lakhs
Working capital: -T.C.I: Rs. 100 Lakhs
Return: 44.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

OCTG TUBE AND FITTINGS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Piping may represent as much as 25 percent of the cost of a chemical-process plant. The installed cost of piping systems varies widely with the materials of construction and the complexity of the system. The economics also depends heavily on the pipe size and fabrication techniques employed. O.C.T.G tube is used in the oil company to deliver mineral oil through this pipe. It is used in the manufacturing of pump parts and gas lift valves. It is largely used in the food and chemical processing industries. Pipes and tubes have varied applications in various industries mainly as transport media for liquid, semi liquid fluids and gases. The future demand is estimated by method of trend analysis. The trend in consumption being highly fluctuating attempt is made to harmonies the series with 3 years moving average. The export demand is estimated to be 7% of the total demand. This provides very good scope for new investment.
Plant capacity: 1500 MT / Annum Tubes, 600 MT/Annum FittingsPlant & machinery: 554 Lakhs
Working capital: N/AT.C.I: Cost of Project : 752 Lakhs
Return: 45.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

AUTO TUBES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

In the manufacture of inner tubes the plant required is fairly simple and inexpensive, the principal outlay being for wrapping machines and mandrills. It is necessary to go in for the business thoroughly if it is desired to compete with established manufacturers, who turn out thousands of tubes per week. Auto tubes are used as a inner tubes for various automobiles such as car, motorcycle, scooters, truck, matador, bus etc. These tubes are used for smooth running and being shock absorber. It is light in weight. The automobile industry in India has in recent years experienced a technological revolution, leading to the production of a wide range of two-wheelers and breaking the monopoly of car manufacturers. Few new entrepreneurs can enter in this project.
Plant capacity: 1000 Nos./dayPlant & machinery: Rs. 32 lakhs
Working capital: -T.C.I: Rs. 165 lakhs
Return: 47.00%Break even: 38.00%
Add to Inquiry Add to Inquiry Basket

GLASS BOTTLES FOR COSMETICS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Glass is so much a part of our daily life that we cannot imagine living without it. Glassware is used both by the consumer as well as by the Government and industry. The primary aim of packaging is to protect the product from air, light, heat, cold, moisture dust, dirt etc. There are three raw materials for glass making, viz. Silica Sand, Soda Ash and Lime. These should be cheaply and freely available as a natural resource. The value of output of cosmetics industry is estimated at Rs.16 bn in the organized sector. Despite the downward trend in the demand of a large number of consumer products, the cosmetic industry continues to grow at a high rate basically of the entry of new players and globally known brands. There is a fair scope for new entrepreneur in this field.
Plant capacity: 1500 MT /AnnumPlant & machinery: 91 Lakhs
Working capital: -T.C.I: Cost of Project : 193 Lakhs
Return: 39.00%Break even: 71.00%
Add to Inquiry Add to Inquiry Basket

STRAW BOARD AND MILL BOARD FROM RICE HUSK AND BAGASSE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Production Schedule

Mill and straw boards are thicker, heavier and less flexible than the convention paper. The thickness of board is the thickness of a single sheet board measured under specified conditions. It is usually expressed in micrometers. Mill/straw board, grey board and other special varieties of boards are used for various packing processes for packing and protecting innumerable consumer and industrial goods. For above and many other reasons, the demand for straw board and mill board is increasing every day with increasing population of the world. It is consumed for various purposes. Besides this huge internal demand, there is a great export potential also. It will be profitable for the new entrants to invest in this project.
Plant capacity: 5 MT/dayPlant & machinery: Rs. 39 lakhs
Working capital: -T.C.I: Rs.169 lakhs
Return: 45.00%Break even: 38.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 11 of 92 | Total 919 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 91 92   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Project Reports & Profiles





Subjects