REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Investment Opportunities & Business Ideas in Qatar, Middle East - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 13 of 219 | Total 2184 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 218 219   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

CEMENT WATER PROOFING COMPOUND - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Water resistance or proofing is an important factor in health and comfort of building occupants. Water proof construction implies the use of a membrance or a film that provides a barrier and covers all surface pores or capillaries. Cement water proofing compounds or water repellant agents are widely used in civil construction works. They are used in the masonary works like dams etc., in the godowns, basements and storage tanks. Among the various varieties of cement, the most commonly used in India is the ordinary portland cement, which is popularly known as gray cement. The largest share in the total consumption of cement is of ordinary portland cement, accounting for more than 70%. OPC is manufactured by grinding clinker with a small quantity of gypsum. It is used in mass and reinforced concrete, and all types of general concrete constructions. There is a good scope for new entrants.
Plant capacity: 100 Kg./DayPlant & machinery: 2 Lakhs
Working capital: -T.C.I: 11 Lakhs
Return: 41.00%Break even: 39.00%
Add to Inquiry Add to Inquiry Basket

BANQUET HALL - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project,Break Even Analysis

Indian traditions are so rich and our emotional standards are so high that most of the ceremonies/functions become simply a monument of show-off and extravagance. Banquet halls are within the reach of almost every strata of people. Moreover, the style of functioning of these banquet halls suits every Indian as well as foreigners. This is, thus, becoming a means for bringing people together and closer. This business truly deserves all supports. A banquet hall is like a boon to those who do not have the required facilities available to celebrate certain ceremonies/functions. It is economical and more favourable than five star hotels and at the same time requires quite a moderate sum to set up the business. The growing popularity of the system is a credential in itself that the future of this industry is quite bright. So, there is good future for existing as well as new entrepreneurs.
Plant capacity: -Plant & machinery: 39 Lakhs
Working capital: -T.C.I: 496 Lakhs
Return: 75.00%Break even: 29.00%
Add to Inquiry Add to Inquiry Basket

FISH FARMING - Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Cost of Project

A larger part of the average family's food bill goes on protein foods e.g. cheese, eggs and fish etc., which are important parts of a healthy and well-balanced diet. Now-a-days people are turning to fresh-water fish such as rainbow trout, carps and tench, which can die raised in ponds and ornamental garden pots. These fish make an attractive substitute for the unproductive gold fish, golden or golden rudd etc. Consider the advantages of raising fish in your ponds. Sea fish and fresh water fish can never be as fresh as they are newly caught. Existing natural pool make an excellent home for fresh water fish. The seafood industry in India has come a long way and today a wide range of seafood products are exported to more than 70 countries in the world. The major ones include shrimp, squid, cuttlefish, oyster, lobster and shark. There is a good scope for new entrants.
Plant capacity: 4 Ton/DayPlant & machinery: Rs. 90 lakhs
Working capital: -T.C.I: Rs. 5 crores
Return: 53.00%Break even: 31.00%
Add to Inquiry Add to Inquiry Basket

FERRO ALLOYS OF NIOBIUM, MOLYBDENUM, TITANIUM, TUNGSTEN AND VANADIUM - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Ferro Alloys are the principal alloying agents in iron and steel production. Addition of ferro alloys improves mechanical and physical properties of iron and steel products such as strength, toughness, hardness and corrosion-resistance etc. Most of the ferro alloys contain less than 50% of iron content. The use of highly flexible furnaces make it possible to produce a range of ferro alloy compositions. Ferro alloys are employed in metallurgy for finishing carbon steels, for producing alloy steels and special steels with improved physical and mechanical properties. The demand for ferro alloys has been increasing with that of alloy and special steels. It is expected to reach the level of 1.20 m tonnes by 2006-07. The industry has tied up with companies in Europe for technology inputs. The major users of alloy steel are: auto industry, railways, forgings, tubes, springs and other engineering industries. So, there is good future for existing as well as new entrepreneurs.
Plant capacity: 5 MT/DayPlant & machinery: Rs. 2 crores
Working capital: -T.C.I: Rs. 5 crores
Return: 50.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

WHITE OIL FROM KEROSENE OIL - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Deeply refined pale yellow oils are called white oil. In 1934 the white oil manufacturers association (WOMA) divided the white oils in three viscosity grades. The oils of first category are used in the processing of foods, which must not contain more than 0.1-0.6% of the oil. The white oils of the second category can be added to products, which themselves are not foods full tufts but may come into direct contact with foods. It is widely employed in the pharmaceutical, cosmetic and toilet preparation industries. Technical white oils are employed in industries, where highly refined non-medicinal quality oil is required. The use of white oils in the textile industry is important certain high speed sewing machines utilize technical white oils. The demand for white oil is much but the supply of this item is not so much. In future its demand will be more and it would be having a bright future scope.
Plant capacity: 25 MT/DayPlant & machinery: Rs. 950 lakhs
Working capital: N/AT.C.I: Rs. 5 crores
Return: 45.00%Break even: 35.00%
Add to Inquiry Add to Inquiry Basket

GAS FILLING OF L.P.G. CYLINDER - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Bulk petroleum and hydrocarbons generally are most commonly stored in cylindrical tanks of welded steel. For quantities upto about 250 nos. the cylindrical tanks may be carried horizontally to variations in temperatures. L.P.G. is used mainly for cooking purposes in India. It is usually filled in small cylinders to be used in household cooking. It is also used for drying or in industry with oxygen for cutting welding, brazing, heating etc. It is used as industrial fuels, boiler fuels, furnace fuels also as internal combustion engine fuel. At present there are four units in the organized sector manufacturing L.P.G. valves and regulators. There are also many units operating in the small scale sector to manufacture L.P.G. valves and regulators. The future demand for L.P.G. pressure regulators and valves would depend upon L.P.G. cylinders produced and used for domestic purpose. The production of L.P.G. cylinders is estimated to increase at 9 percent per annum. There is good scope for new entrants.
Plant capacity: 10000 /dayPlant & machinery: Rs. 1 crores
Working capital: -T.C.I: Rs. 27 crores
Return: 54.00%Break even: 21.00%
Add to Inquiry Add to Inquiry Basket

GALVANIZED IRON WIRE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The production of G.I. Wire from H.B. wire is not complicated. In case of H.B. wire drawing from H.B. bars, certain mechanical process is used. An important difference between bar drawing and wire drawing is that the bars must remain straight. The length of the bars, which can be drawn, is limited by the maximum travel of the carriage, which may be from 50 to 100 feet. Wire and wire products, including flat strips are one of the largest consuming items. G.I. Steel wires of standard quality are used for the manufacture of ropes for various applications, barbed fencing and nails etc. Although the G.I. flat wires are manufactured from mild steel as starting material, range over a wide field. The project, however, is designed to turnout only wires, which have the largest demand, i.e. flat wires or strip in galvanized form. There is a good scope for new entrepreneurs to venture into this field.
Plant capacity: 8.00 MT./dayPlant & machinery: Rs. 70 lakhs
Working capital: -T.C.I: Rs. 419 lakhs
Return: 46.00%Break even: 32.00%
Add to Inquiry Add to Inquiry Basket

TRADING OF IRON ORES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Steel is considered to be the strongest material in that price. Day to day life and growth of industry and infrastructure in any country totally depends on steel. It is consumed in all spheres of life. It has played major role in the development of major economics like US, EU, Japan and now China. Investment of Rs. 90,000 crores has been made in the steel sector, which is the highest among all industrial sectors in India. Iron ore is used in pigment, polishing compound, metallurgy, magnetic inks and in ferrites for electronic industry, coatings for magnetic tape, catalyst. It is the second most important abundant metal in the earth. The global demand growth rate is estimated as 6%. The anticipated steel demand and per capita consumption in India is expected to double in the next eight years. Even at a conservative growth rate of six percent steel demand in 2012 will be about 50 MT. To looking its demand, the scope for investment in this project is bright.
Plant capacity: 5000 MT/DayPlant & machinery: Rs. 156 lakhs
Working capital: -T.C.I: Rs. 2396 lakhs
Return: 52.00%Break even: 21.00%
Add to Inquiry Add to Inquiry Basket

CRANE HOOKS AND OTHER FORGED PRODUCTS(SUSPENSION PART, SUSPENSION SHAFT, SAFETY LATCH) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials

A lifting hook comprising a suspension part fitted with a suspension shaft, which supports a hook part provided with a slot. A safety latch is pivotally journalled in the hook part. When the safety latch is swung down, the suspension shaft moves into said end portion, whereby the safety latch is locked. The present invention refers to a lifting hook fitted with a safety latch device which, when the hook is loaded by a load suspended from same, safely closes the hook opening and makes it impossible to open it. Few organized and many private companies are manufacturing cranes and they also produce crane hooks. Forging is categorized on the basis of temperature to which the metal is heated, on the type of pressure applied and on the type of die used. There are a large number of units in the forging sector. Most of these units are located in close proximity to the automobiles belts. There is a good scope to invest in this project.
Plant capacity: 5 MT/dayPlant & machinery: Rs. 57 Lakhs
Working capital: -T.C.I: Rs. 352 lakhs
Return: 48.00%Break even: 33.00%
Add to Inquiry Add to Inquiry Basket

RECLAMATION OF USED ENGINE OIL - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Engine oil becomes contaminated with foreign material in service. In circulating systems, where a substantial quantity of oil is involved, it is desirable to maintain it as clean as possible to provide maximum working efficiency and to keep wear and damage of lubricated parts to a minimum. Reconditioning of used oil may be accomplished by a continuous by pass or batch methods or combination of these. Engine oil is used in all types of engines with petrol, diesel etc. Used engine oils are generally discarded after a specific period of use. The present oil crisis has led to the development of certain techniques of refining such oil to make them compatible with fresh oil. In our country (India) about 35% of demand is meet by our own production and rest of the demand is meet up by the import only. Hence, It can be concluded that any type of petroleum product can be easily marketed if its selling cost is less than imported one. So it can be predicted that there is good scope for new entrepreneurs in the petroleum base oil product.
Plant capacity: 1 MT/dayPlant & machinery: Rs. 20 lakhs
Working capital: -T.C.I: Rs. 100 Lakhs
Return: 44.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 13 of 219 | Total 2184 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 218 219   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top