Google Search

Search

Already a Member ?

Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 151 of 191 | Total 1903 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 151 190 191   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Sulfamethoxazole

Sulfamethoxazole is an antibiotic. It is used for bacterial infections such as urinary tract infections, bronchitis, and prostatitis and is effective against both gram negative and positive bacteria such as Listeria monocytogenes and E. coli. Sulfamethoxazole is a bacteriostatic antibacterial agent that interferes with folic acid synthesis in susceptible bacteria. Its broad spectrum of activity has been limited by the development of resistance. Sulfamethoxazole and trimethoprim combination is used to treat infections such as urinary tract infections, middle ear infections (otitis media), bronchitis, traveler's diarrhea, and shigellosis (bacillary dysentery). This medicine is also used to prevent or treat Pneumocystis jiroveci pneumonia or Pneumocystis carinii pneumonia (PCP), a very serious kind of pneumonia. Sulfamethoxazole is a sulfonamide bacteriostatic antibiotic that is most commonly used in combination with trimethoprim as the drug Bactrim. Sulfamethoxazole competitively inhibits dihydropteroate synthase preventing the formation of dihydropteroic acid, a precursor of folic acid which is required for bacterial growth.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Galvanising of Zinc (By Electrical Process)

The Zinc Galvanizing process starts by carefully cleaning the surface of the steel by hoisting it from the Black area by a 2MT EOT crane and immersing it in a degreasing tank filled with an acid based degreaser after which it is cleansed twice in pickling tanks filled with 15% con. Zinc Galvanizing plants demand for lot of participation by the promoters as it has to stabilize the plant processes and parameters and involve the plant management to achieve the targets aimed.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Poppy Seed Oil by Expeller Process

Poppyseed oil (also poppy seed oil, poppy oil, and oleum papaveris seminis) is an edible oil from poppy seeds (seeds of Papaver somniferum, the opium poppy). The oil has culinary and pharmaceutical uses, as well as long established uses in the making of paints, varnishes, and soaps. Poppyseed oil is used as a high end salad oil and for refining sweet dishes, mueslis and salads. Due to its high content of polyunsaturated linoleic acid virgin poppyseed oil shouldn't be used for cooking and baking. Poppy seed oil is oil obtained from the seeds of yellowish-brown opium plant. It is a precious source of nutrients including saturated fatty acids, minerals and vitamins. Poppy seed oil is unique to the market and has several nutrient benefits due to the presence of large amounts of unsaturated essential fatty acids. The global poppy seed oil market is segmented on the basis of nature, application, distribution channel, and region. Based on the nature of poppy seed oil, it is segmented as organic and conventional. The organic oil market remains persistent in growth in the food sector this is due to the attractiveness of healthier and safe to use products. The global poppy seed oil market is segmented on the basis of nature, application, distribution channel, and region. Based on the nature of poppy seed oil, it is segmented as organic and conventional. The organic oil market remains persistent in growth in the food sector this is due to the attractiveness of healthier and safe to use products. The growing concern among consumers regarding non-organic/conventional oil using chemicals processing is expected to further increase the demand for organic poppy seed oil. The global production of poppy seeds was valued at 92 thousand metric ton in 2016 and is expected to register a CAGR of 2.3%. On the bases of application the poppy seed oil is segmented as food, dietary supplements and other uses: which include industrial uses such as making soap paints and varnishes. Among these the market for poppy seed oil in food applications is expected to grow steadily whereas the supplement market is driven by increasing consumer awareness and promotions on social media and hence is expected to show a relatively faster growth rate in terms of value over the forecast period.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

High Alumina Ceramic

Alumina ceramic (Aluminum Oxide or Al2O3) is an excellent electrical insulator and one of the most widely used advanced ceramic materials. Additionally, it is extremely resistant to wear and corrosion. Alumina components are used in a wide range of applications such as electronics, pump components and automotive sensors. Alumina based ceramics are by far the largest range of advanced ceramics made by Morgan Technical Ceramics. Due to the important combination of properties, the behaviour and characteristics of our Alumina products to give you the best possible component. Alumina ceramic is the most mature of the engineering ceramics, offering excellent electrical insulation properties together with high hardness and good wear resistance but relatively low strength and fracture toughness.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Mustard Seed Cultivation

Mustard belongs to the family of “Cruciferae” and popularly used in Indian cooking. India is number one in production of mustard. Mustard gives edible oil which is used as cooking In India. Mustard seed is used as condiment in the preparation of vegetable and curries in India. Mustard seeds are the small round seeds of various mustard plants. The seeds are usually about 1 to 2 millimetres (0.039 to 0.079 in) in diameter and may be colored from yellowish white to black. They are an important spice in many regional foods and may come from one of three different plants: black mustard (Brassica nigra), brown Indian mustard (B. juncea), or white/yellow mustard. Global mustard seed market is segmented on the basis of product type, application, sales channels and region. On the basis of product type the global mustard seed market is segmented into, white/yellow mustard seeds, black mustard seeds and sarepta mustard seeds. The sarepta mustard seeds segment is further sub-segmented into, brown and oriental mustard seeds. Oriental mustard seeds are darker in color in comparison to the yellow mustard seeds mainly due to its high content of phenolic compounds. White or yellow mustard seeds have the least pungent taste while black mustard seeds are the most pungent mustard seeds. By application the global mustard seeds market is segmented into, industrial application, commercial application and Household. Industrial application of mustard seeds includes its use in food and beverages, cosmetic and personal care and other applications. Food and beverages segment is the dominant application segment in the overall mustard seeds market attributable to its widespread use as a condiment. Mustard oil extracted from mustard seeds is widely used across Asian countries. Mustard seeds are also used in salad dressing in countries such as U.S., Canada and other European countries. Apart from this application of mustard seeds in cosmetic is widespread wherein mustard seeds are used as a natural scrub, hydrating agent, age defying agent and aids in hair growth, thus contributing towards revenue generation in the overall mustard seeds market.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Rubberised Coir Mattresses

Rubberized Coir is a natural fiber and is relatively airier in design. This helps air to circulate well inside the mattress and maintains a relatively cool sleeping temperature. Rubberized coir mattresses are good on one side, coir mattress being natural product keeps sleeper comfortable all the weathers. The global mattress market was valued at $31,181.5 million in 2017 and is predicted to register a CAGR of 3.8%, during 2018–2023. Rise in purchasing power parity and growing global population are the major drivers for the mattress market. Increasing number of hotels and rooms are expected to drive the growth of mattress.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Nitrocellulose Lacquer

Nitrocellulose lacquer is a material which has many uses both inside and outside the home. Like any other lacquer, it can be used to finish wood products and keep painted surfaces shining, though there is much more to it than that. Nitrocellulose lacquer was initially marketed as a fast-drying alternative to wood treatments such as shellac and varnishes. It was also combined with pigment to produce one of the first spray-on paints. Nitrocellulose lacquer is made by mixing fast-drying solvents with wood and cotton pulp containing cellulose that has been broken down by nitric and sulfuric acid. Nitrocellulose is a highly inflammable compound produced by nitrating cellulose by exposure to nitric acid or other powerful nitrating agent. Nitrocellulose when utilized as a low-order explosive or propellant it is known as guncotton.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Silver Coated Sugar Balls

Silver Coated Sugar Balls are highly demanded and is chosen by customers over similar assortment on account of its long shelf life, easy digestion nature and soothing aroma. Sugar ball contains outstanding quality nutrients.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

TMT Steel Bar (Saria/Rod) Manufacturing Industry

TMT Steel Bar (Saria/Rod) Manufacturing Industry. Production of TMT Rebars (Reinforced Bars), TMT Rods. TMT Steel TMT bars or Thermo-Mechanically Treated bars are high-strength reinforcement bars having a tough outer core and a soft inner core. Thermo-Mechanically Treated bars or TMT bars are widely used for different construction projects. Made from high strength steel, TMT bars possess several qualities that make them the most preferred material for various construction projects. With a unique metallurgical process that combines work hardening along with heat-treatment to create robust and high strength bars from low-carbon steel, TMT bars have a great demand. Advantages of using TMT Bars • Great Ductility and Bend Ability: One of the distinct advantages of using TMT bars is that they have great ductility and bend ability properties. Because of this, one can create pre-welded meshes that are used to eliminate the need of manual binding. This brings down construction and fabrication time. • Malleability: TMT bars are most preferred because of their flexible nature • Resistant to Earthquakes: TMT bars are resistant to earthquakes thanks to their soft pearlite core. Because of this, they can bear seismic and dynamic loading. TMT bars boast of high fatigue resistance to seismic loads because of high ductility and therefore they are widely used in earthquake prone areas. • Great Bonding Strength: Another major advantage of TMT bars is their superior bonding strength. There are external ribs running across the entire length of these bars and this fosters great bonding strength between the concrete and the bar. Fire resistant: Fire safety of a structure is one of the primary concerns for engineers and residents. TMT bars boast of high thermal stability and can resist temperatures ranging from 400 to 600 degrees Celsius. Thus, they are perfect for resisting fire and provide safety. • Fine Welding Features: TMT rebars (having low carbon content) can be used for butt and other weld joints without reduction in strength at the weld joints. • Resistant to Corrosion: The TMT process gives these bars anti-corrosive properties. These bars undergo controlled water-cooling process that resists formation of coarse carbides. Coarse carbides are the main reasons for the corrosive nature of a common bar. Absence of surface stresses is another reason for these bars to be corrosion resistant. Thus, using them increases the longevity of a structure. • Cost-Effective and Malleable: High tensile strength and better elongation make these bars highly cost-effective than normal bars. They are easy to transport and malleable. Application of TMT bars TMT bars find their application in many avenues. They are used for constructing: • Bridges • Dams • High-rise apartments • Industrial structures • Flyovers Market Outlook The demand for low-cost reinforcement bars of higher yield strength has gone up exponentially over the last few decades. Increasing project scales with, ranging from spectacular high-rises, to mammoth dams and bridges spanning for miles together, the fascination for building 'mega' structures meant that plenty of research went into finding low-cost reinforcement bars of higher yield strength. The sale of construction materials including TMT bars are estimated to grow at a Compounded Annual Growth Rate (CAGR) of 6.18% in terms of volume. Currently, the size of the Indian construction industry is USD 2.8 billion. Recently the government has announced an early completion of 10 million rural houses by the end of 2018, ahead of 2018 deadline and 11.8 million urban houses by 2020 instead or 2022 deadline under the “Housing for All” initiative. This will require huge amount of TMT bars and we expect multifold growth in demand in the coming years. Increase in demand for low cost reinforcement bars in construction projects such as dams and bridges drives the global thermo-mechanically treated (TMT) steel bars market. Rise in government support for the production of steel and coal propels the thermo-mechanically treated (TMT) steel bars market. Thermo-mechanically treated (TMT) steel bars are preferred over torsional bars, as these have high strength and ductility. This is a key factor boosting the demand for global thermo-mechanically treated (TMT) steel bars market. However, technical constraints such as the properties such as ductility and strength associated with high-grade thermo-mechanically treated (TMT) steel bars are anticipated to hamper the global thermo-mechanically treated (TMT) steel bars market. Based on dimension, the global thermo-mechanically treated (TMT) steel bars market can be segmented into 12mm, 68mm, 812mm, and others. The selection of dimensions of the steel bar depends on its use. Thermo-mechanically treated (TMT) steel bars are used in construction of the foundation, which bears the load of the building, beams, and slabs. Thermo-mechanically treated (TMT) steel bars help withstand natural calamities such as windstorms and earthquakes. Key players operating in the global thermo-mechanically treated (TMT) steel bars market include Arcelor Mittal Zenica, Balkan Steel Engineering Ltd., Essar Steel, HBIS Group, HUS Ltd., Metalopromet d. o. o. Kula, MMD, SIDERAL S.H.P.K., SIJ Group, and TATA Steel. Iron & Steel Industry in India India was the world’s third-largest steel [email protected] and third-largest steel consumer in 2017%. The growth in the Indian steel sector has been driven by domestic availability of raw materials such as iron ore and cost-effective labour. Consequently, the steel sector has been a major contributor to India’s manufacturing output. India’s finished steel consumption grew at a CAGR of 5.69 per cent during FY08-FY18 to reach 90.68 MT. India’s crude steel and finished steel production increased to 102.34 MT and 104.98 MT in 2017-18, respectively. In 2017-18, the country’s finished steel exports increased 17 per cent year-on-year to 9.62 million tonnes (MT), as compared to 8.24 MT in 2016-17. Exports and imports of finished steel stood at 4.33 MT and 5.41 MT, during Apr-Nov 2018 (P). Iron and steel is basis for laying the vibrant Indian industry. Production of steel has come to exist as an index of a country's potential, industrial and economic growth. Being a core sector, steel industry tracks the overall economic growth in the long term. Also, steel demand, being derived from other sectors like automobiles, consumer durables and infrastructure, its fortune is dependent on the growth of these user industries. The Indian steel sector enjoys advantages of domestic availability of raw materials and cheap labour. Iron ore is also available in abundant quantities. This provides major cost advantage to the domestic steel industry. Global Iron & Steel Market Global iron & steel market is expected to witness rapid growth owing to strong demand from construction and transportation sector over the forecast period. Rapid industrialization and urbanization, particularly in the emerging regions such as Asia Pacific and Central & South America are expected to drive the overall iron & steel market. The construction industry, by far, has been the leading consumer of steel and iron, using up more of the materials than even wood and cement. However, steel and iron producers are now compelled to compete with new construction materials such as ceramics and polymers. This has enabled the production of lightweight steel and iron products that are also high on tensile strength. The engineering industry in general – and the heavy engineering industry in particular – has relied on ferrous materials for several years now and continues to do despite the advent of an assortment of newer material varieties. Major iron and steel producing countries are China, India, Brazil, Japan, Australia, South Korea, Germany, and Ukraine. Asia Pacific is estimated to witness fastest growth rate and is thus poised to dominate the global market. Economies such China, India, and other South-East Asian economies are presumed to lead the regional market. Developed regions such as North America and Europe are projected to experience a positive market outlook owing to considerable economic revival over the forecast period. Major industry participants in the iron & steel market include Bridon International Ltd., ArcelorMittal S.A., Kobe Steel Ltd., Insteel Industries Inc., N.V. Bekaert SA, Steel Authority of India Ltd. POSCO, Tata Steel Ltd., Rio Tinto, BHP, Vale, Tree Island Industries Ltd., and Leggett & Platt Incorporated. Tags #TMT_Bars_Manufacturing_Process, TMT Bar Manufacturing, TMT Bar Manufacturing Business in India, #What_is_the_Manufacturing_Process_of_TMT_Steel_bars? #TMT_Bars_Manufacturing_Plant, TMT Bars Manufacturing Process Pdf, TMT Bar Manufacturing Process PPT, TMT Bars Manufacturing Plant Cost, TMT Bar Manufacturing Process Flow Chart, TMT Bar Production in India, TMT Bars Manufacture, TMT Bars, #Thermo_Mechanically_Treated_(TMT)_Bars, TMT Steel Rods, Steel Bars, Steel TMT, TMT Saria Manufacture, TMT Steel Bar Manufacture, Thermo Mechanically Treated Bars, TMT Saria, Steel Bar Manufacture, #TMT_Saria_&_Steel_Bar_Manufacture, Production of TMT Rebars, TMT Rebar Production, Steel Bar Production, TMT Steel Bars Manufacturing Industry, TMT Bars Manufacture in India, #How_to_Start_TMT_Bar_Manufacturing_Business, Setting up TMT Bars Manufacturing Unit, Project Report for Setting Up TMT Bars Manufacturing Unit, Production Unit of TMT Bars, Manufacturing of TMT Bars, #Project_Report_on_TMT_Bars_Pdf, TMT Bars Manufacturing Plant Cost In India, TMT Bars (Sariya) Manufacturing Plant, Building Material, Project Report on TMT Bar Manufacturing Industry, Detailed Project Report on TMT Bar Production, #Project_Report_on_TMT_Bar_Production, Pre-Investment Feasibility Study on TMT Bars (Sariya) Manufacturing, Techno-Economic feasibility study on TMT Steel Bars Manufacturing Industry, Feasibility report on TMT Steel Bars Manufacturing Industry, #Free_Project_Profile_on_TMT_Bar_Production, Project profile on TMT Steel Bars Manufacturing Industry, Download free project profile on TMT Bars (Sariya) Manufacturing, TMT Steel Bars Manufacturing Process, TMT Bar Production, #TMT_Bar_Industry, TMT Bars Rolling Mill
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Stabilized Insoluble Sulfur

Insoluble sulfur is, by definition, sulfur which is insoluble in carbon disulfide. This form of sulfur is generally understood to be polymeric in nature, the polymer chains being made up of up to several thousand sulfur atoms. Insoluble sulfur is distinguished from soluble sulfur, which is crystalline in form. Most commercial grades of insoluble sulfur contain both soluble and insoluble sulfur. Commercial insoluble sulfur products with varying amounts of insoluble sulfur are available. The most important use for insoluble sulfur is as a vulcanizing agent in the rubber-making industry. Insoluble sulfur is primarily used in the rubber industry. Its advantage over ground natural sulfur is that it does not cause bloom, and that it does not dissolve and migrate in rubber. The S8 ring molecules present in soluble sulfur at room temperature open at temperatures above 158°C, allowing chains of sulfur to combine with one another to form polymeric sulfur. Russia is an oil driven economy, and consequently, was significantly impacted due to decline in global oil prices over the past few years. Automotive sector in the country also witnessed a dip, which further negatively impacted tyre market in Russia. Government of Russia has been taking various initiatives for attracting foreign direct investment (FDI) in various sectors such as agriculture, infrastructure and transportation & tourism. Demand for tyres in Russia is expected to increase at a moderate pace in the coming years, owing to rising per capita income and growing purchasing power of the consumers. Russia is set to host FIFA World Cup in 2018, which is expected to attract large number of tourists in the country, which is expected to fuel infrastructural development in the country.
Plant capacity: 3,400 MT per annumPlant & machinery: 304 Lakhs
Working capital: -T.C.I: Cost of Project: 939 Lakhs
Return: 27.00%Break even: 62.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 151 of 191 | Total 1903 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 151 190 191   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top