Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 111 of 118 | Total 1180 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 111 117 118   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Melamine formaldehyde Powder

Melamine resin or melamine formaldehyde (also shortened to melamine) is a hard, thermosetting plastic material made from melamine and formaldehyde by polymerization. It is then used to cross-link with alkyd, epoxy, acrylic, and polyester resins, used in surface coatings. Melamine-formaldehyde resins in partially condensed form, herein referred to as melamine-formaldehyde precondensates, are widely used in finishing of textiles. They are commonly applied to the textiles in an aqueous medium. Such resins are commonly produced by condensing melamine and formaldehyde in the presence of methanol under reflux conditions. The reaction between the melamine and formaldehyde is exothermic and diflicult to control so as to form chiefly the desired trior tetramethylol melamine. Melamine formaldehyde is a synthetic resin manufactured by reacting melamine with highly reactive formaldehyde gas under alkaline conditions. Melamine formaldehyde resin is generally compared with urea-formaldehyde resin with respect to its processing and applications, however it is harder, stronger and offers even better resistance to chemicals, moisture, heat, electricity and scratching, compared against urea-formaldehyde. It is referred as thermosetting polymer or amino resins, exhibits excellent value added properties such as low density, thermal stability, high gloss, transparency, and light fastness. Owing to its value added properties, melamine formaldehyde has found great industrial applications in fire retardants, surface coatings, plywood, particleboard, adhesive, molding compounds and laminates among others. Global Melamine Formaldehyde Market size is expected to reach $687 million by 2022 from $430 million in 2015. It is anticipated to grow at a CAGR of 6.9%. Melamine formaldehyde is a synthetic resin obtained by chemical combination of melamine. It is a translucent solid made from urea and formaldehyde, a highly reactive strong smelling gas derived from methane. The reaction product of melamine, urea, and related compounds with formaldehyde are called amino lasts. The hardness and chemical & moisture resistance quality of melamine resin is attributed to its complex and interlinked polymer structure. Melamine resin or Melamine formaldehyde is an organic, heterocyclic compound made from polymerizing melamine and formaldehyde to form a hard, thermosetting plastic material. Melamine when in its butylated form is dissolved in xylene and n-butanol. Nitrogen being a major constituent in the melamine structure makes melamine formaldehyde extremely flame retardant by nature. Melamine formaldehyde is formed by cross-linking this product with other products such as epoxy, acrylic, alkyd, and polyester resins. MF has some beneficial physical characteristics over Urea resins. It is moisture-resistant, hard, and stronger than urea formaldehyde. Global melamine formaldehyde market is anticipated to observe vigorous development over the forecast period owing to increase in demand from a range of end-use market applications. The properties of melamine formaldehyde such as resistance to water, fire, UV and light is slated to aid the overall market considerably over the forecast period.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Liquid Glucose from Potatoes

Potato is widely consumed as food all over the world. It contains the starch as a major carbohydrate. Surplus and cull potatoes are used as feed for livestock and also as raw material for the manufacture of starch, ethyl alcohol and a few other industrial products like, dextrose, liquid Glucose etc. Glucose syrup is a sweetening liquid which is made after the hydrolysis of glucose molecule, generally corn, rice, wheat and potato is taken to make glucose syrup because they are a rich source of starch. Glucose syrup is used for making frozen dessert and candy. Glucose syrup are also used to make baked food items to add sweetness. Glucose syrup are generally free from fat, but contains high amount of calories. Glucose syrup made from cornstarch contains a small amount of thiamine, zinc as well as calcium. The Global Market for Glucose Syrup has witnessed continued demand during the last few years and is projected to reach 29,888 kilo tons by 2022, at a CAGR of 3.6% from 2016 to 2022. Raise in demand across various industries such as food and beverage, pharmaceuticals, confectionery are driving the global glucose syrup market. Asia-Pacific region is estimated to dominate the global glucose syrup market holding a lion’s share of more than 30% accounting for a market volume of more than 10,000 kilo tons. North America will witness the highest growth rate of 3.94% in the global glucose syrup market whereas Europe and Rest of the world will witness moderate growth rate.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

One Time Carbon Paper

One time carbon paper can be used as one time black carbon in varied applications viz. Carbon paper (originally carbonic paper) was originally paper coated on one side with a layer of a loosely bound dry ink or pigmented coating, bound with wax, used for making one or more copies simultaneously with the creation of an original document when using a typewriter or a ballpoint pen. The manufacture of carbon paper was formerly the largest consumer of montan wax. The Global Carbon Paper Market report is a compilation of the several factors driving and restraining this market along with a thorough run-down of the sales volume of each product within carefully categorized sub-segments of the market. The global Carbon Paper industry with a focus on the Southeast Asia market.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Cement Paint

Cement paint is water based paint and is applied to either exterior or interior including brick work and concrete. It is used for painting exterior wall surface mainly for preventing water penetration and reductions of dirt collection. It is suitable for coating concrete as well as decorating indoor and outdoor walls. Cement paint is mostly used to cover those surfaces that are subjected to frequent weather changes and heavy use. Cement paint is one of the common names for a family of special paint coatings made for masonry and cement-based materials, including concrete, mortar (and brick), concrete block and stucco. Similar coatings may be called "masonry paint" or "concrete paint." Since the cement paints gives high order of protection, decoration, beautification and durable properties than the normal whitewash. It is extensively used on all types of emented masonry surrfaces like Bungalows, multi-storied building, bridges, dams, general public buildings, houses etc. The demand of cement paint is increasing with the general requirement of human beings throughout the country. Cement Paints have a very good market and a very promising future. Cement Paints: Used best for exterior walls, they are favorable for all weather conditions and protect exterior walls from the damaging effects of nature. These paints are fungus and algae resistant making walls appear unaffected for longer spans of time. The benefits of using cement paints are that they prove to be a great waterproofing solution and are easy to apply. Additionally, they can be stored for longer periods of time because they are available in the form of powder and need to be dissolved with water before application. Being highly economical, cement wall paints can be applied once in 2 or 3 years to keep them looking great.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Battery for Auto Vehicles

An automotive battery is a rechargeable battery that supplies electrical current to a motor vehicle. Its main purpose is to feed the starter, which starts the engine. Once the engine is running, power for the car's electrical systems is supplied by the alternator. The market demand for these battery is huge as more and more vehicles are being developed daily and more electric vehicles are increasingly being used. As the automotive technology has advanced, automobiles consist of a large number of functions these days. These functions have increased exponentially during the past few years, as a result of the intense competition amongst the vehicle manufacturers. Features, like state-of-the-art gadgets and lighting, car infotainment systems, etc. have trickled down even into the entry-level automobiles. These new attributes have put immense pressure on car batteries, which have to take on higher loads. The new fuel-saving technologies, like micro-hybrid systems are also leading to higher battery usage. Features in commercial and passenger vehicles are set to increase exponentially during the forecast period, which is anticipated be a major driver for the automotive battery market. The Global demand for automotive batteries is forecast to rise 13% per year to $54.1 billion in 2022, expanding to 38% of total sales. Rising manufacturing and use of motor vehicles worldwide will spur sales growth. The HEV segment will more than quadruple in size as these vehicles increasingly penetrate global markets. Electric vehicles, which use more expensive batteries than hybrids, will post particularly strong growth, boosting overall market value. While falling prices for lithium-ion batteries (on a kWh basis) will be a major contributor to growth for HEVs, a shift toward batteries with higher capacities will boost prices on a unit basis and contribute to the expanding market size.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Departmental Store

A departmental store is a large retail trading organization. It has several departments, which are classified and organized accordingly. Departments are made as per different types of goods to be sold. For example, individual departments are established for selling packed food goods, groceries, garments, stationery, cutlery, cosmetics, medicines, computes, sports, furniture, etc., so that consumers can purchase all basic household requirements under one roof. It provides them maximum shopping convenience and therefore, also called as 'Universal Providers' or 'one spot shopping'. Today, departments often include the following: clothing, furniture, home appliances, toys, cosmetics, house ware, gardening, toiletries, sporting goods, paint, and hardware. Additionally, other lines of products such as food, books, jewelry, electronics, stationery, photographic equipment, baby products, and products for pets are sometimes included. Customers generally check out near the front of the store, although some stores include sales counters within each department. Some stores are one of many within a larger retail chain, while others are independent retailers. The Department Stores industry comprises retailers that sell a wide range of merchandise, including apparel, footwear, home goods, appliances, toys and sporting equipment. While big-box retailers, such as Wal-Mart and Target, have historically dominated the industry, many have expanded their product offerings in recent years to include groceries. This one-stop-shop format has boosted revenue for these companies; however, general merchandise stores that offer groceries are included in the Warehouse Clubs and Supercenters industry which effectively removes them from the Department Stores industry.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Tripod Stands, Tables & Chairs

Tripod Stands A tripod is a portable three-legged frame or stand, used as a platform for supporting the weight and maintaining the stability of some other object. A tripod provides stability against downward forces and horizontal forces and movements about horizontal axes. A tripod is a three legged device to hold your camera still. This is useful at lower shutter speeds to prevent the shake of your hands or the action of pressing the shutter from blurring the image, what we call camera shake for short. The outlook for the industrial tripods market is expected to be positive and the industrial tripods market will register healthy year over year growth over the forecast period. This growth can be attributed to rising demand for advanced-tech features in photography and strict government regulations to ensure quality of infrastructure. Under the material type segment of the industrial tripods market, the carbon fiber type industrial tripod segment is expected to register significant growth during the forecast period as this technology provides distinctive features, such as resistance to weather and corrosion. Tables & Chairs A table is an item of furniture with a flat top and one or more legs, used as a surface for working at, eating from or on which to place things. Some common types of table are the dining room table, which is used for seated persons to eat meals; the coffee table, which is a low table used in living rooms to display items or serve refreshments; and the bedside table, which is used to place an alarm clock and a lamp. There are also a range of specialized types of tables, such as drafting tables, used for doing architectural drawings, and sewing tables. Overall, the U.S. furniture market is expected to experience growth. The market registered a 4.5% increase in growth in 2016, placing its overall value at $114 billion. Although the first six months of 2017 saw a softened increase of 2.5% in consumer spending year over year, the U.S. furniture market is anticipated to grow at a “compound annual growth rate of 2.9% through 2019.”
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

White Cement

White cement is typically specified to ensure clean, bright, consistent colors, including light pastels. White cement allows a wide range of color options for producing structural and architectural concrete, as well as masonry and cementations building products. The final color and look of concrete and masonry materials are affected by many factors: White cement is a construction material, which exhibits aesthetic and hydraulic binding properties. This cement is often deployed along with pigments to impart attractive color to the concretes and mortars, which is not feasible with ordinary gray cement. White cement is extensively used as an alternative to gray cement owing to its value-added properties such as its ability to reflect heat and improved aesthetic appearance. The demand for white cement is higher among countries with hot environment conditions as more heat is reflected from the resulting white concrete surface when compared to standard gray concrete. Benefits • While grey cement is great for normal bricklaying work, white cement is necessary for the surface of the wall. It makes the walls resistant to external elements & acts as a smooth base for the paint. • The process is called a ‘wash’. The custom is to have your walls lime-washed; however, using white cement concrete mix will serve you multiple benefits. • The white cement wash offers a much better finish to start with, concealing hairline cracks with a durable, matte finish. The second benefit is the effect on the paints; the white surface allows the paint to stand out while also protecting it from moisture from the walls. The white cement market is expected to register a significant growth during 2018 to 2023 (the forecast period). This tremendous growth is supported by the increasing construction activities in emerging economies.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Copper Strip Coils from Scraps

Copper strip is produced in a wide variety of copper alloys, including clad composites. It can be produced in standard dimensions. Copper Strips Market size is expected to witness a gush in demand due to high gains in construction spending enhances the product consumption in various applications including switchgears, transformers and other electronics. Rising infrastructural development, particularly in developing countries of Europe, Middle East and Africa, will further aid copper strips suppliers as updating the national power grids in these countries fuel the production of wires and cables.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Brass and Copper Tube

Copper and brass are two very similar looking metals but there are many occasions when it's useful to be able to differentiate between brass and copper pipes. Copper is a naturally occurring metal which is fairly unique in the fact that it has a gold like color. Most metals (with the exception of gold) are silver in color. Brass is a manmade alloy of copper and zinc mixed together. Brass is a metallic alloy that is made of copper and zinc. The proportions of zinc and copper can vary to create different types of brass alloys with varying mechanical and electrical properties. It is a substitutional alloy: atoms of the two constituents may replace each other within the same crystal structure. Brass is used for decoration for its bright gold-like appearance; for applications where low friction is required such as locks, gears, bearings, doorknobs, ammunition casings and valves; for plumbing and electrical applications; and extensively in brass musical instruments such as horns and bells where a combination of high workability (historically with hand tools) and durability is desired. It is also used in zippers. Brass is often used in situations in which it is important that sparks not be struck, such as in fittings and tools used near flammable or explosive materials. Copper pipes and tubes are generally utilized to supply hot water and cold water. They are also employed as refrigerant line in high voltage AC systems. Furthermore, copper pipes and tubes are customized to cater individual requirements for many applications such as ultra-low bandwidth devices. The global copper pipes and tubes market will grow at a CAGR of close to 4% during the forecast period.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 111 of 118 | Total 1180 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 111 117 118   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Project Reports & Profiles





Subjects