Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat



The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.


Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.



The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.






MINING & MINERALS:Project Opportunities in Gujarat




Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.


Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.




The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.




Agro and Food Processing: Project Opportunities in Gujarat




Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.



Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.


The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.


SALT INDUSTRY:Project Opportunities in Gujarat




India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.


Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.





Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.



GEMS AND JEWELLERY:Project Opportunities in Gujarat


Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.



Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.



The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.


CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat




The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers



Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.



In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.


TEXTILES:Project Opportunities in Gujarat




The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.


Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.



The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.


Waste management: Project Opportunities in Gujarat



Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.



Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 


National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 91 of 118 | Total 1180 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 91 117 118   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Engineering College

“The nation's competitiveness depends, in part, on the skills of tomorrow's engineers.” As the saying goes, there is need of engineering college in India for the development of country and provide better opportunity. Engineering is concerned with doing, realizing and implementing thongs. Thus, the aim of future engineering education should be the integration of knowledge, skills, understanding and experience. For economic growth and prosperity, the need is to produce highly professional and competent engineers. This could be achieved by imparting quality teaching to students. Towards this, some norms and standards of engineering education need to be laid down so as to educate the students with appropriate skills suitable for a rapidly changing industrial scenario. If we consider employment available versus Engineer, there is no vacant space among the all engineers output from the existence engineering college. Now a day’s majority of engineers work as administrator not as engineer. Entrepreneurs who invest in this project will be successful.
Plant capacity: Engineering College: 40 Students each Branch, 6 Branches.Total Students in 4th Year 960 Nos.Plant & machinery: Rs 571 lakhs
Working capital: -T.C.I: Cost of Project: Rs 3065 lakhs
Return: 1.00%Break even: 1.00%
Add to Inquiry Add to Inquiry Basket

Poultry Feed

Poultry feed is food for farm poultry, including chickens, ducks, geese and other domestic birds. Healthy poultry require a sufficient amount of protein and carbohydrates, along with the necessary vitamins, dietary minerals, and an adequate supply of water. Lactose-fermentation of feed can aid in supplying vitamins and minerals to poultry. Egg laying hens require 4 grams per day of calcium of which 2 grams are used in the egg. Oyster shells are often used as a source of dietary calcium. Certain diets also require the use of grit, tiny rocks such as pieces of granite, in the feed. The feed must remain clean and dry; contaminated feed can infect poultry. India's demand for compound feed is expected to rise 28 million tonnes by 2017-18. The market is expected to grow from USD XX billion in 2016, to USD XXX Billion market by 2022, growing at a CAGR of over 2.7% during the forecast period. The globally poultry feed market is projected to generate revenues worth $252,036.2 million and poultry feed additives is projected to generate $7,829.8 million by 2018 growing at a CAGR of 6.1% and 6.0 % respectively by 2018. . Which facilitates the development of new technologies and ensure a high quality product. Few Indian major players are as under • Amalgam Nutrients & Feeds Ltd. • Amrit Feeds Ltd. • Anmol Feeds Pvt. Ltd. • Annam Feeds Ltd. • Balaji Agro Inds. Ltd. • Jhunjhunwala Oil Mills Ltd. • Kapila Feeds Pvt. Ltd.
Plant capacity: Poultry Feed: 16 MT/DayPlant & machinery: Rs 43 lakhs
Working capital: -T.C.I: Cost of Project: Rs 244 lakhs
Return: 26.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

Razor Blade

A razor is a bladed tool primarily used in the removal of unwanted body hair through the act of shaving. Kinds of razors include straight razors, disposable razor; The double-edged safety razor is a razor with a slant bar that can be used on both sides, with two open edges. The blade on the double-edged safety razor is slightly curved to allow for a smoother and cleaner shave. Indian men's grooming market will grow at a CAGR of 22% by 2020. This growth is mainly due to the rising need to look well groomed, increasing per capita income, and rapid urbanization. The global Disposable Razor Blades Market valuation is expected to rise by 2025. The changing fashion trends and increasing emphasis on external appearances are expected to drive market demand from 2017 to 2025. This facilitates the development of new technologies and ensures a high quality product. Few Indian major players are as under • Everkeen Blade Co. Ltd. • Gillette India Ltd. • Harbans Lal Malhotra & Sons Pvt. Ltd. • Laser Shaving Products Pvt. Ltd. • R C C (Sales) Pvt. Ltd. • Sharpedge Ltd.
Plant capacity: Razor Blade (Double Edge): 100,000 PKTS/DayPlant & machinery: Rs 681 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1325 lakhs
Return: 27.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Ready Mix Coating Powder Used for Coating of Pharmaceuticals Tablets for Regular fill Coating and Functional Film Coating

In pharmaceutical drug delivery of solid oral dosage forms film coatings are frequently applied. The motivation for coating dosage forms range from cosmetic considerations (colour, gloss), improving the stability (light protection, moisture and gas barrier) and making it easier to swallow the tablet. In addition, functional coatings can be used to modify the drug release behaviour from the dosage form. A film coating is a thin polymer-based coat applied to a solid dosage form such as a tablet. The thickness of such a coating is usually between 20-100 µm. The Indian excipient market is expected to grow at the rate of 10–12 percent until 2020. the excipients are priced at 5–7 percent lesser in India v Which facilitates the development of new technologies and ensure a high quality product. Few Indian major players are as under • A D C L Drugs & Chemicals Ltd. • Anmol Drugs & Pharmaceuticals Ltd. • Avinash Drugs Ltd. • Beryl Drugs Ltd. • Bio-Caps India Ltd. • Bio-Ethicals Pharma Ltd. • Biochem Pharmaceutical Inds. Ltd.
Plant capacity: Regular Film Coating Powder: 400 Kgs/Day Functional Fim Coating Powder: 400 Kgs/DayPlant & machinery: Rs 19 lakhs
Working capital: -T.C.I: Cost of Project: Rs 172 lakhs
Return: 28.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Tempering and Toughening of Flat Glass

Toughened glass is a type of soda-lime-silica glass with a sheet thickness 4-12 mm. The sheet has a central tensile stress of 500-1200 kg/cm2 and a ratio of surface compressive stress to central tensile stress of 2:1 to 4:1. Toughened or tempered glass is a type of safety glass processed by controlled thermal or chemical treatments to increase its strength compared with normal glass. Tempered glass is made from normal annealed glass via a thermal tempering process in which the glass is subjected to heat till its softening point and then rapidly cooled. This increases the strength of the glass. A fully tempered glass is 4 to 5 times stronger than an annealed glass of similar thickness. The total market of glass was valued at Rs. 60 bn with 80% supplied by domestic producers. The industry is growing at around 8% per annum. Consumption per capita of glass in India is only about 0.8 kg compared to 3.5 kg in China, 5.2 kg in Thailand, 12 kg in Malaysia and 2.5 kg in Indonesia. The total organised producers in the glass market have a turnover estimated at over Rs. 40 bn, represented by a fairly large number of suppliers. The global market for flat glass is approximately 62 mn tonne (0.2 mn per day), the market is growing at 6% per annum. Europe, China and North America together account for estimated 70% of high quality float glass demand. As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian major players are as under • Asahi India Glass Ltd. • Atul Glass Inds. Ltd. • Auroplast India Ltd. • Cherry Fashions Ltd. • Floatglass India Ltd. • Gobind Glass & Inds. Ltd. • Gold Plus Glass Industry Ltd.
Plant capacity: Tempered and Toughened Glass: 1280 Sq.Mt./DayPlant & machinery: Rs 337 lakhs
Working capital: -T.C.I: Cost of Project: Rs 767 lakhs
Return: 25.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Invert Sugar Syrup

Invert sugar (syrup) is an edible mixture of sugars made by heating up table sugar (sucrose) with water. As invert sugar is thought to be sweeter than table sugar and foods that contain it hold in moisture and crystallize less easily, bakers, who call it invert syrup, may use it more than other sweeteners. Invert sugar (C12H24O12) is a mixture of glucose and fructose obtained by the hydrolysis of sucrose. Cane sugar comes from sugarcane. Invert Syrup contains equal proportions of the invert (reducing) sugars: glucose and fructose. It has wide application and is particularly useful where high concentrations of invert sugars are required. The requirement for invert sugar syrup has been on the rise in India. There is a gradual realization among both bakers and honey makers that it is almost impossible to achieve the same quality of invert sugar using in-house production. The global liquid sugar market is segmented based on type, application, and geography. The inverted sugar syrup segment is expected to grow at a faster rate comparatively due to its extensive application in non-alcoholic refreshing beverages. As a whole you can invest in this project without risk and earn profit. Few Indian major players are as under • Dhampure Specialty Sugars Ltd. • Eastern Sugar & Inds. Ltd. • Gem Sugars Ltd. • Sangita Bio-Chem Ltd. • U P Organics Ltd.
Plant capacity: Invert Sugar Syrup: 20 MT/DayPlant & machinery: Rs 397 lakhs
Working capital: -T.C.I: Cost of Project : Rs 733 lakhs
Return: 27.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Curcumin Extraction Unit

Curcumin is the main biologically active phytochemical compound of Turmeric. Molecular chemical formula of Curcumin: C21H20O6. The most important constituents in organic turmeric are Curcuminoids, which is approximately 6%, and the yellow coloring principles of which Curcumin constitutes 50-60%. Curcumin is a water-soluble orange-yellow coloured powder. Today, India is the primary exporter of turmeric (known as haldi in India). Curcumin is one of three curcuminoids of turmeric. The other two curcuminoids are demethoxycurcumin and bisdemethoxy curcumin. Curcumin production is mainly concentrated in India exceeding 78% of the global output. The industry expects the significant growth in China, India, Brazil, and South Africa. The BRIC nations will represent more than 44% of the global OTC demand by 2024. This facilitates the development of new technologies and ensures a high quality product. Few Indian major players are as under • Arjuna Natural Extracts Ltd. • Concert Spices & Exports Ltd. • Enjayes Spices & Chemical Oils Ltd. • Naturite Agro Products Ltd. • Sanat Products Ltd. • Synthite Industries Ltd.
Plant capacity: Curcumin Powder: 25 Kgs/Day Turmeric Oil : 25 Kgs/Day Deoiled Turmeric : 440 Kgs/DayPlant & machinery: Rs 149 lakhs
Working capital: -T.C.I: Cost of Project: Rs 303 lakhs
Return: 26.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Ethyl and Butyl Acetate

Ethyl and butyl acetates are solvents used in surface coatings, inks, flavorings and pharmaceuticals, and other applications. Ethyl acetate (systematically ethyl ethanoate, commonly abbreviated EtOAc or EA) is the organic compound with the formula CH3–COO–CH2–CH3, simplified to C4H8O2. This colorless liquid has a characteristic sweet smell (similar to pear drops) and is used in glues, nail polish removers, decaffeinating tea and coffee, and cigarettes. Ethyl acetate is the ester of ethanol and acetic acid; it is manufactured on a large scale for use as a solvent. Demand for alkyl acetates in India looks promising, as it is expected to have strong growth in domestic consumption and exports during 2015–20. The Global Ethyl Acetate Market is growing with the rapid pace; mainly due to the expanding automotive and construction industries. The market is forecasted to demonstrate a stunning growth by 2027, surpassing its previous growth records in terms of value with a striking CAGR during the estimated period (2017 – 2027). Thus, due to demand it is best to invest in this project. Few Indian major players are as under • Ashok Alco-Chem Ltd. • Ester India Chemicals Pvt. Ltd. • Ghaziabad Organics Ltd. • Goodearth Industries Ltd. • Laxmi Organic Inds. Ltd. • Wallams (India) Agro Products & Power Ltd.
Plant capacity: Ethyl Acetate: 8.3 MT/Day Butyl Acetate: 8.3 MT/DayPlant & machinery: Rs 239 lakhs
Working capital: -T.C.I: Cost of Project: Rs 546 lakhs
Return: 27.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Banana, Onion, Orange and Tomato Powder

The fruit & vegetable powders are specialized foods that have extremely high concentration of vitamins, minerals and phytonutrients. They make a great addition to smoothies and other recipes. Dehydrated vegetable and fruit powders are more practical than their fresh counterparts for food manufacturing. They have a longer shelf life and some powders like are packed with essential vitamins and minerals. While powders are high in demand, the problem is that most of them exist with bland flavors and colors. This is extraction, processing, and storage. Onion powder is considered to offer enhanced taste and better texture owing to which it has become an essential ingredient in a number of applications in the food industry. the market is further expected to reach a volume of around 68 Thousand Tons by 2022. the market is further expected to reach a volume of around 68 Thousand Tons by 2022. As a whole there is a good scope for new entrepreneur to invest in this business. ? Few Indian major players are as under • Coduras Exports Ltd. • Gujarat Dehyd Foods Ltd. • K I Z Foods Ltd. • Kasaar Innovative Foods Ltd. • L M P Gujarat Agro Exports Ltd. • Oceanic Foods Ltd. • Orient Vegetexpo Ltd.
Plant capacity: Banana Powder: 625 Kgs./Day Onion Powder: 300 Kgs./Day Orange Powder: 500 Kgs./Day Tomato Powder: 500 Kgs./DayPlant & machinery: Rs 98 lakhs
Working capital: -T.C.I: Cost of Project: Rs 401 lakhs
Return: 25.00%Break even: 65.00%
Add to Inquiry Add to Inquiry Basket

Potato Powder, Granules and Pellets

Potato powder is increasingly being used in a variety of food preparations like snack foods, soups, curries and other dishes as a thickening agent. Potato Granules are created during a process where the potato cells remain almost intact, which leads to a very low proportion of starch. Potato Granules can be soluble at high temperatures when use as a thickening agent. Potato pellets are intermediate non-expanded products made with raw materials potatoes. These semi-finished products are generally sold to snack manufacturers. India Potato production is likely to be lower at close to 100 lakh tonne this year, down from 110 lakh tonne in 2017. Revenue in the Potato Products segment amounts to US$3405m in 2018. The market is expected to grow annually by 6.5 % (CAGR 2018-2021). From an international perspective it is shown that most revenue is generated in the United States (US$9,504m in 2018). As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian major players are as under • Balaji Wafers Pvt. Ltd. • Indian Food Fermentations Ltd. • Kalindi Agro Biotech Ltd. • Southern Health Foods Pvt. Ltd.
Plant capacity: Potato Powder: 5 MT/Day Potato Granules : 2.50 MT/Day Potato Pellets: 2.50 MT/DayPlant & machinery: 726 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1068 lakhs
Return: 27.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 91 of 118 | Total 1180 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 91 117 118   Next »


Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top

Products & Services


Contact Us

My Account


Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search

Search Project Reports & Profiles