Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 41 of 118 | Total 1180 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 41 117 118   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Wood Plastic Composite (WPC)

Wood-plastic composites (WPCs) are a product class that has been developing over the last 40 years resulting in increased applications and expanded market share.More specifically, WPCs are composites containing a wood component in particleform (wood particles/wood flour) and a polymer matrix. They are used in a varietyof structural and non-structural applications ranging from component and product prototyping to outdoor decking. Wood plastic composites (WPCs) are roughly 50:50 mixtures of thermoplastic polymers and small wood particles. The wood and thermoplastics are usually compounded above the melting temperature of the thermoplastic polymers and then further processed to make various WPC products. WPC can be manufactured in a variety of colors, shapes and sizes, and with different surface textures. Depending on the processing method, WPCs can be formed into almost any shape and thus are used for a wide variety of applications, including windows, door frames, interior panels in cars, railings, fences, landscaping timbers, cladding and siding, park benches, molding and furniture. This industry segment has grown in double digit percentages annually for the past decade.The wood plastic composite market is projected to grow from $ 2579.90 million in last year to $4,601.7 million by 2019, with a CAGR of 12.2%. Polyethylene is the single-largest segment, holding 56.6% share of the global wood plastic composite market in last year and is projected to grow with a CAGR of 12.0% in 2019.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • ECOSTE (A Venture of ASMA TRAEXIM PVT. LTD.) • RAJPRIYA REALTY SERVICES PVT. LTD. • Umiya Carbon Pvt. Ltd. • ALSTONE • Kmb Extrusion Pvt. Ltd.
Plant capacity: 4800000 sq.ft.Plant & machinery: Rs 146 lakhs
Working capital: -T.C.I: Cost of Project: Rs 391 lakhs
Return: 27.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Pectin from Citrus, Lemon and Oranges

Pectin is a naturally occurring substance (a polysaccaride) found in all plant tissue, calcium pectin being present between the cell walls and serving as a strengthening or building agent. Fruits naturally possessing relatively large amount of pectin include lemons, bitter oranges, apples, quinces, currants and plums.The main use for pectin (vegetable agglutinate) is as a gelling agent, thickening agent and stabilizer in food. The classical application is giving the jelly-like consistency to jams or marmalades, which would otherwise be sweet juices. Market for pectin has been witnessing significant growth on account of rising demand for food products from developed as well as developing economies. The industry has been mature in developed regions such Europe, followed by North America. However, the industry for pectin is anticipated to grow rapidly in emerging economies such as China and India owing to change in lifestyle of the individuals as well as changing consumer preferences for convenience foods. Moreover, economic development in China has resulted in increasing purchase power of consumers, leading to increasing demand for high-quality processed foods. Although the industry for pectin is rapidly growing driven by rising demand for processed and convenience foods, growing preference towards functional foods from various health conscious consumers have also played a key role in the growth of the market. As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Krishna pectinspvt. Ltd. • Akshar Exim Company Private Limited • DevsonImpex Private Limited • Gujarat General Food Chem Pvt. Ltd. • Asha Ram & Sons Private Limited
Plant capacity: Pectin: 150,000Kgs/annumPlant & machinery: Rs 1289 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1660 lakhs
Return: 23.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Precipitated Silica from Rice Husk Ash

Rice milling generates a byproduct known as husk. This surrounds the paddy grain. During milling of paddy about 78 % of weight is received as rice, broken rice and bran.Rest 22 % of the weight of paddy is received as husk. This husk is used as fuel in the rice mills to generate steam for the parboiling process. This husk contains about 75 % organic volatile matter and the balance 25 % of the weight of this husk is converted into ash during the firing process, is known as rice husk ash (RHA). This RHA in turn contains around 85 % - 90 % amorphous silica. Precipitated silica is used as filler for paper & rubber as a carrier & diluents for agricultural chemicals, as an anti-caking agent, to control viscosity & thickness and as a cleansing agent in toothpastes & in cosmetics. Precipitated silica, along with fumed silica, silica sol, and silica gel, is a part of the global specialty silica market. This market is expected to exhibit positive single-digit growth through 2018 and reach a valuation of US$ 7 Bn by 2018. Precipitated silica market, which accounts for around 70% of the global specialty silica market, is also expected to witness steady growth in the next three years. The rising demand for energy efficient products in the automotive industry has resulted in the rapid growth of the global precipitated silica market.As a result of these factors, the global precipitated silica market is expected to expand at a 5.5% CAGR between 2015 and 2023.Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • 20 Microns Ltd • Bharucha Stone & Sand Works Pvt. Ltd. • Insilco Ltd. • Integrated Glass Materials Ltd. • Mines & Rock Products (India) Pvt. Ltd. • SonalSil-Chem Ltd.
Plant capacity: Precipitated Silica: 1500mt/annum Activated Carbon (by product): 420mt/annum Sodium Carbonate (by product): 630mt/annumPlant & machinery: Rs 519 lakhs
Working capital: -T.C.I: Cost of Project: Rs 787 lakhs
Return: 17.24%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Pan Masala

The custom of chewing breath fresheners after meals has a very long history, particularly in India. Pan Masala is a balanced mixture of betel leaf with lime, areca nut, clove, cardamom, mint, tobacco, essence and other ingredients. It is an agricultural product with herbal properties, also available in hygienic pack and pouches. It acts as a mouth freshener.Various versions are also served in the Middle East and parts of Southeast Asia, where they are treated as mouth fresheners. Some households and restaurants make their own mixtures with special house ingredients, and it is also possible to purchase packaged pan masala from spice stores and many markets in India. Despite its growing demand in rural areas, pan masala is gaining prominence in urban areas of India. Factors like its immense popularity, constantly increasing disposable incomes, convenient packaging, aggressive advertising campaigns by manufacturers and the large-scale switching of consumers from tobacco products to pan masala are currently encouraging the growth of pan masala market. According to IMARC group, the pan masala market has reached values worth around INR 35,459 Crores in 2016 growing at a CAGR of 16.5% during 2009-2016. The Indian exports of pan masala are dominated by UAE accounting for around one-third of the total export values. UAE is followed by USA, Singapore, Afghanistan, South Africa, Saudi Arabia and Malaysia. Rajnigandha represents the largest manufacturer of pan masala followed by RMD, Pan Vilas and Pan Parag. As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Ashok & Company Pan Bahar Ltd. • Dhariwal Industries Pvt. Ltd. • Jeet (India) Ltd. • Pan Parag India Ltd. • Patel Pan Products Ltd. • Shree Meenakshi Food Products Pvt. Ltd. • Trimurti Fragrances Pvt. Ltd.
Plant capacity: Sada Pan Masala: 99000kgs/annum Meetha Pan Masala: 99000kgs/annum Zarda Pan Masala: 102000kgs/annumPlant & machinery: Rs 35 lakhs
Working capital: -T.C.I: Cost of Project: Rs 226 lakhs
Return: 28.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Warehouse

Warehousing refers to the activities involving storage of goods on a large-scale in asystematic and orderly manner and making them available conveniently when needed. In other words, warehousing means holding or preserving goods in huge quantities from the time of their purchase or production till their actual use or sale.Warehousing is one of the important auxiliaries to trade. Across the supply chains, warehousing is an important element of activity in the distribution of goods, from raw materials and work in progress through to finished products. It is integral part to the supply chain network within which it operates and as such its roles and objectives should synchronize with the objectives of the supply chain. The logistics and warehousing industry’s revenue is anticipated to grow at a CAGR of ~% during 2015-2019. 3PL, e-commerce logistics and cold chain are the 3 biggest segments in the logistics and warehousing industry in India based on future growth rates. The pressing need for time-sensitive delivery has reshaped the logistics industry as many traditional logistics players are now diversifying their services portfolio to make space for e-commerce logistics. Based on the rise of QSR market in India, cold chain market is also witnessing remarkable growth. The increased foreign trade has led to the CFS/ICD segment of warehousing industry to record impressive growth rates in the recent years and is expected to continue the same for the forthcoming years. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Drive india enterprises solutions ltd • DRS Warehousing South Pvt. Ltd. • Redington (India) Limited • Shalimar Warehousing Corporation • Jeena
Plant capacity: Sacks Storage: 15000000 sacks/annumPlant & machinery: Rs 177 lakhs
Working capital: -T.C.I: Cost of Project: Rs 808 lakhs
Return: 23.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

PCC Electric Poles

Concrete poles were first used over 60 years ago and were then made of normal reinforced concrete. As technology improved, production and use of concrete poles gradually increased. Prestressed concrete poles are highly durable and strong. PSC Poles are fabricated from excellent quality concrete material. These poles are used extensively in electrical industry, for establishing electrical connections and fittings. The poles are ecofriendly and require very low maintenance. The PSC poles have consistent material properties throughout their length. PSC poles are not susceptible to rot and decay. The PSC pole has the same strength throughout its service life. PSC poles are not susceptible to insect and animal attack. The demand for Prestressed (Pre-cast/Reinforced) concrete-cement (PCC) poles directly depends on the growth of electric power sector. The growth in generation and suppy of electric energy gives rise to demands for PCC poles & other systems by way of OEM & replacement/renovation demands. A large network of electricity distribution for rural electrifications, agricultural & irrigational consumptions can be catered to only by establishing an efficient generation & distribution standards. All these factors are essentially going to raise the demand for not only electrical equipments but also distribution materials including poles.Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Arvind Kumar Nand Kumar Ltd. • Ashoka Pre-Con Pvt. Ltd. • Concrete Udyog Ltd. • Genus Power Infrastructures Ltd. • Shri KrsnaUrja Project Pvt. Ltd.
Plant capacity: Prestressed Concrete Cement Electric Poles: 60,000nos/annumPlant & machinery: Rs 304 lakhs
Working capital: -T.C.I: Cost of Project: Rs 713 lakhs
Return: 25.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Paracetamol

Paracetamol, also known as acetaminophen or APAP, is a medication used to treat pain and fever. It is typically used for mild to moderate pain. It is often sold in combination with other ingredients such as in many cold medications. In combination with opioid pain medication, paracetamol is used for more severe pain such as cancer pain and after surgery. It is typically used either by mouth or rectally but is also available intravenously. Effects last between two and four hours. Paracetamol lacks anti-inflammatory action in rheumatic disorders. However, it is less toxic than the Aspirin and does not produce anemia and liver damage, which sometimes result from the continued use of acetanilide and acetophenotidine. It is also an important intermediate in the manufacture of other pharmaceuticals like theantimalarialamodiaquine. The pharmaceutical industry in India ranks 3rd in the world terms of volume and 14th in terms of value. 20% of global exports in generics, making it the largest provider of generic medicines globally. USD 45 Billion in revenue by 2020, revenue of USD 55 billion by 2020 as base case, and can grow to USD 70 billion in a aggressive case scenario. USD 26.1 Billion in generics by 2016. USD 200 Billion to be spent on infrastructure by 2024. Global pharma companies are increasingly exploring low cost option to outsource research and manufacturing, because of emerging slow-down in patented drug sales and high cost of R&D.Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Alta Laboratories Ltd. • Granules India Ltd. • HaffkineAjintha Pharmaceuticals Ltd. • Nalin Chemicals Ltd. • Neelachal Technologies Ltd • Pan Drugs Ltd.
Plant capacity: Paracetamol Tablets: 1500mt/annum Paracetamol Powder: 420mt/annumPlant & machinery: Rs 349 lakhs
Working capital: -T.C.I: Cost of Project: Rs 863 lakhs
Return: 27.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Engineering College (Aeronautical)

Engineering education is the activity of teaching knowledge and principles related to the professional practice of engineering. It includes the initial education (Bachelor and or MastersDegree) for becoming an engineer, and any advanced education and specializations that follow. Engineering education is typically accompanied by additional post graduate examinations and supervised training as the requirements for a professional engineering license. The aeronautical engineers are primarily responsible for creation of safer and more energy efficient economical methods for travelling including aircraft, helicopters, satellites, missiles and space crafts. These includes science of propulsion and aerodynamics, even it covers the development and selection of materials and equipment that are utilized in aircraft. This field is pretty new and under-developed as of now in India, primarily because of the huge investments it requires. The prominent government players, as rightly pointed out by Sanket, are ISRO, HAL, few DRDO labs like GTRE, ADA, DRDL and NAL. A few private companies like Tata, L & T, Mahindra, Taneja too have aerospace divisions, which basically cater to either the Indian government companies that I had mentioned above, or do consultancy activities for foreign aerospace companies. Aerospace engineering is a wide area, and we should not think that being an aerospace engineer means working in the field of aerodynamics or flight dynamics only. The subdivisions of an aerospace engineering curriculum usually consists of courses on propulsion, structures, robotics, navigation, control & guidance, manufacturing, spaceflight, aerodynamics, advanced fluid dynamics, material sciences and flight mechanics.So there are opportunities for Engineers from all Aeronautics, Mechanical, Electronics/Electrical in the industry. There are also challenges for Management professionals but they generally sprout from experience in engineering previous projects. There is a huge market in India for mini UAVs which do not require as large as an investment. There is a huge market for contractors. There is a huge market for maintenance of private & civil aircraft.Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Indian Institute of Technology, (IIT Kharagpur) • Anna University (AU Chennai) • Manipal Institute of Technology (MIT Manipal) • Madras Institute of Technology - Anna University (MIT Chromepet) • Jawaharlal Nehru Technological University (JNTU Kakinada) • Sathyabama University • B.S. Abdur Rahman University (BSAU) COST ESTIMATION CAPACITY Plant & Machinery : Break Even Point : 93%
Plant capacity: Aeronautical Engineering: 60 students/annum Mechanical Engineering: 60 students/annum Civil Engineering: 60 students/annum Aircraft Maintenance Engineering: 60 students/annum Air Hostage Training Course (6 Month Diploma):120 students/annumPlant & machinery: Rs 623 lakhs
Working capital: -T.C.I: Cost of Project: Rs 3336 lakhs
Return: 1.00%Break even: 93.00%
Add to Inquiry Add to Inquiry Basket

Floral Foam

Floral foam is a dense, lightweight and porous material that can be cut into virtually any shape. It holds its shape when wet and provides both water and support to cut flower arrangements. The density of floral foam means that it holds large quantities of water, which in turn, increases the life of flowers. It also provides increased support to the flower stems, giving more control with flower arrangements.Floral foam originally appeared as a green brick. Today, it comes in various colors and a variety of shapes such as spheres, crosses or wreaths suitable for a variety of arranging needs. In addition, floral foam is pH balanced. This means that the acidity of the environment which the flowers are placed in remains at the optimum level ultimately helping your flowers to last. Another important feature of floral foam is how quickly it will soak and absorb water.Floral foams have become a permanent staple in the art of flower arrangement. By providing trouble-free support for flowers, many designs have been made achievable, giving flower arranging artists more room to come up with every design that they can imagine. As we can see that there is great demand for flowers in Indian society for example wedding, Valentine’s Day, birthday, anniversary and many more events. So increase in floriculture means increase in floral foam business.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • SMITHERS-OASIS INDIA PVT.LTD. • Sunflower Floral Foam • VND Cell Plast • AvishkarFloritech Pvt. Ltd. • K. G. Enterprises
Plant capacity: 3,600,000 Pcs/annumPlant & machinery: Rs 69 lakhs
Working capital: -T.C.I: Cost of Project : Rs 270 lakh
Return: 27.00%Break even: 47.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Fluoride

Aluminium fluoride is the chemical compound with the formula AlF3. It has the consistency of a white powder. AlF3 is refractory, in strong contrast to the other halides of aluminium. Adding aluminium fluoride to the production process of primary aluminium lowers the consumption of electricity required in the smelting process and thereby considerably contributes to the reduction of production costs of aluminium. Aluminium producers (smelters) are the main users of aluminium fluoride. Aluminium fluoride is used in many industrial processes. It is one of the minor constituents added to the electrolytic cells during the production of metallic aluminium. Aluminium fluoride is used in turning alumina into aluminium. Major end user industries for aluminum fluoride include automobiles, construction, aerospace and pharmaceuticals among others. Of these, building and construction represents the largest end user segment for aluminum fluoride and the trend is anticipated to continue for a foreseeable future. Pharmaceuticals segment is expected to be the fastest growing end user segment during the forecast period.As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Alufluoride Ltd. • Mafatlal Fine Spg. & Mfg. Co. Ltd. • Navin Fluorine Intl. Ltd. • Southern Petrochemical Inds. Corpn. Ltd. • Tanfac Industries Ltd.
Plant capacity: Aluminium Fluoride: 60,000MT/annum, Silica as bye product: 20,400MT/annumPlant & machinery: Rs 1739 lakhs
Working capital: -T.C.I: Cost of Project: Rs 3496 lakhs
Return: 28.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 41 of 118 | Total 1180 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 41 117 118   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Project Reports & Profiles





Subjects