Best Business Opportunities in Manipur - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Manipur is a state in north Eastern India, with the city of Imphal as its capital. Manipur has been at the crossroads of Asian economic and cultural exchange for more than 2500 years. It has long connected Indian subcontinent to Southeast Asia, enabling migration of people, cultures and religions. Manipur is primarily an agrarian economy, with significant hydroelectric power generation potential.

The natural vegetation occupies an area of about 14,365 km² which is nearly 64% of the total geographical area of the state. The vegetation consists of a large variety of plants ranging from short and tall grasses, reeds and bamboos to trees of various species. Broadly, there are four types of forests - Tropical Semi-evergreen, Dry Temperate Forest, Sub-Tropical Pine and Tropical Moist Deciduous.


DEMOGRAPHIC PROFILE

Manipur has population of 25.7 Lakhs, an increase from figure of 22.94 Lakh. Total population of Manipur as per 2011 census is 2,570,390 of which male and female are 1,290,171 and 1,280,219 respectively.

Total area of Manipur is 22,327 sq. km. Density of Manipur is 115 per sq km which is lower than national average 382 per sq km. In 2001, density of Manipur was 103 per sq km.

Of the total population of Manipur state, around 67.55 percent live in the villages of rural areas. In actual numbers, males and females were 878,469 and 857,767 respectively. Total population of rural areas of Manipur state was 1,736,236. In rural areas of Manipur, literacy rate for males and female stood at 83.39 % and 67.03 %. Average literacy rate in Manipur for rural areas was 76.20 percent. Total literates in rural areas were 1,142,564.

TOURISM

Least touched and least discovered Manipur promises to be the great tourist discovery of the21st century. An oval shaped valley surrounded by blue green hills, rich in art and tradition has inspired description such as the Switzerland of the East with its cascading rapids, tripling rivers, varieties of flowers, exotic blooms and lakes. The people of Manipur include Meitei, Nagas, Kuki-Chin-Mizo and Gorkhas groups and Muslims and other colorful communities which have lived in complete harmony for centuries.

The Ministry of Tourism has five Regional offices located at Kolkata (East), Mumbai (West), Delhi (North), Chennai (South) and Guwahati (North East), which are headed by an officer of the level of Deputy Director General designated as Regional Director.

Domestic tourists intending to visit Manipur by road via Dimapur/Kohima require Inner Line Permits to pass through Nagaland. These are issued by the Liaison officers of the Government of Nagaland at New Delhi, Calcutta, Guwahati, Shillong and the Sub-divisional officer (Civil), Dimapur, deputy Commissioner, Imphal can also issue permits to tourists traveling by road from imphal to Kohima and Dimapur in Nagaland.

INDUSTRY SECTOR

The Information Technology and IT Enabled Services sector in India is looking towards Tier-II and Tier-III cities to meet the growing demands of the industry for sourcing its required skilled manpower. The youth of Manipur have not only excelled in the field of Sports, but have already established a noticeable presence in the ITES industry in India.

Manipur State is striving to score higher on being business-friendly in terms of the available IT infrastructure. These include:

•        Software Technology Parks of India (STPI) unit of Imphal with Earth station and OFC connectivity.

•        Up gradation of IT infrastructure at Imphal to provide modern Business-ready built-up office space for IT/ITES firms.

•        Internet on the move – Various Telcos like BSNL, Tata Indicom, Airtel etc. are providing Wireless Internet across the State.

A high rate of unemployment exists in Manipur, particularly among the educated youth. According to the Live Register of Employment Exchange, the total number of educated job-seekers were recorded as 5, 83.65 thousands.

Manipur is rich in natural resources but due to difficult terrain, inadequate infrastructural facilities and varying climatic conditions, the state could not develop much in the industrial sector of its economy. In the initial stage, Govt. policy in the state was one of revival and revitalization of the traditional handlooms and handicrafts of the local habitats. The contribution of the manufacturing sector to the total gross state domestic product at current prices is found to be 6.17 percent. The trend of industrial development and the present local conditions of the state and in consonance with industrial policy of the Government of India, the Govt. of Manipur in its policy announcement of 1990, has decided to focus attention to the small scale and agro-based industries without discouraging the medium and large-scale industries. It is expected to serve the objective of employment generation and dispersal of industries in rural and urban areas. The state has laid emphasis on creating a strong industrial base and employment opportunities in the state through provision of various growth inducing factors based on locally available resources. It is based on locally available raw materials and minerals. In order to promote rapid industrialization, the State Government has over the years been offering attractive package of incentives and concessions to invigorative industries.

The khadi and Village Industries Commission (KVIC) was established by the Govt. of India in the year 1957. The Khadi and Village Industries is not only providing employment to people in rural and semi-urban areas at low investment per job, but also utilizes local skill resources and provides part-time as well as full time work to rural artisans, women and minorities.

The traditional sector of industries falls within the purview of organizations such as Khadi and Village Industries Commission. The KVIC include artisans in tiny industrial units and defines it as any industry located in a village or town inhabited by population not exceeding 10000 which produces goods and renders services with or without the use of power in which the fixed capital per head does not exceed Rs.15000.

Growth Centres are large villages or small towns which have the potential to become the nuclei for the socio-economic development of the surrounding area. The Growth Centres can be identified by the different orders with respect to the quality and quantity of services and facilities, service area and population. A growth centre of lowest order should have services such as agricultural input centre, primary and middle school, maternity and child care centres and daily market.

Small-Scale Industries (SSI) is an important segment of the economy, contributing substantially in the form of production, employment and exports. It has continued to play a vital role in the fulfillment of socio-economic objectives. The principal factor for defining small-scale Industries has always been based on the size of investment. Small-Scale Industries are those industries whose investment in fixed assets such as plants and machineries does not exceed Rs.100.00 lakhs (Rs.1 Crore). Investment in plant and machinery in respect of industry related Small-Scale Service and Business Enterprises (SSSBE) were increased to Rs.10.00 lakhs from Rs.5.00 lakhs. For speedy growth of small-scale industries, the Government has already brought about simplifications in the SSI registration procedures.

The State Government has introduced this Policy with various components being offered such as, incentives, improved infrastructure facilities, supply of quality power, and credit flow from Bank and Financial institutions, better market linkages and to boost investor confidence.

The Government of Manipur desire Manipur to be a preferred destination for industrial and trade activities and achieving to the aspiration of the people of Manipur, thereby affording to –

•        All round economic development and to improve living standards.

•        To create employment opportunities, skill development and self

•        Employment opportunities.

•        Optimal utilization of both natural and physical resources.

OBJECTIVE OF INDUSTRIAL POLICY

•        Develop adequate infrastructures to ensure planned and accelerated industrial development.

•        Promote maximum capital investment in the State for economic activities resulting in employment opportunities, improving standard of living of people at large and all-round development of the State.

•        Promote modernization and technology up-gradation of existing industrial units.

•        Encourage quality control, standardization and competitiveness of local products.

•        Promote eco-friendly industries.


INDUSTRIAL ACTIVITIES IDENTIFIED AS THRUST AREAS

•             Agro based industry 

•             Bio-Technology industries.

•             Floriculture. 

•             Handloom and Handicraft.

•             Medicinal Plants.

•             Distillation of oils from aromatic plants.

•             Mineral based industries.

•             Information Technology Trade and Commerce under Export Import mechanisms.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 31 of 85 | Total 844 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 31 84 85   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Pan Masala

The custom of chewing breath fresheners after meals has a very long history, particularly in India. Pan Masala is a balanced mixture of betel leaf with lime, areca nut, clove, cardamom, mint, tobacco, essence and other ingredients. It is an agricultural product with herbal properties, also available in hygienic pack and pouches. It acts as a mouth freshener.Various versions are also served in the Middle East and parts of Southeast Asia, where they are treated as mouth fresheners. Some households and restaurants make their own mixtures with special house ingredients, and it is also possible to purchase packaged pan masala from spice stores and many markets in India. Despite its growing demand in rural areas, pan masala is gaining prominence in urban areas of India. Factors like its immense popularity, constantly increasing disposable incomes, convenient packaging, aggressive advertising campaigns by manufacturers and the large-scale switching of consumers from tobacco products to pan masala are currently encouraging the growth of pan masala market. According to IMARC group, the pan masala market has reached values worth around INR 35,459 Crores in 2016 growing at a CAGR of 16.5% during 2009-2016. The Indian exports of pan masala are dominated by UAE accounting for around one-third of the total export values. UAE is followed by USA, Singapore, Afghanistan, South Africa, Saudi Arabia and Malaysia. Rajnigandha represents the largest manufacturer of pan masala followed by RMD, Pan Vilas and Pan Parag. As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Ashok & Company Pan Bahar Ltd. • Dhariwal Industries Pvt. Ltd. • Jeet (India) Ltd. • Pan Parag India Ltd. • Patel Pan Products Ltd. • Shree Meenakshi Food Products Pvt. Ltd. • Trimurti Fragrances Pvt. Ltd.
Plant capacity: Sada Pan Masala: 99000kgs/annum Meetha Pan Masala: 99000kgs/annum Zarda Pan Masala: 102000kgs/annumPlant & machinery: Rs 35 lakhs
Working capital: -T.C.I: Cost of Project: Rs 226 lakhs
Return: 28.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Warehouse

Warehousing refers to the activities involving storage of goods on a large-scale in asystematic and orderly manner and making them available conveniently when needed. In other words, warehousing means holding or preserving goods in huge quantities from the time of their purchase or production till their actual use or sale.Warehousing is one of the important auxiliaries to trade. Across the supply chains, warehousing is an important element of activity in the distribution of goods, from raw materials and work in progress through to finished products. It is integral part to the supply chain network within which it operates and as such its roles and objectives should synchronize with the objectives of the supply chain. The logistics and warehousing industry’s revenue is anticipated to grow at a CAGR of ~% during 2015-2019. 3PL, e-commerce logistics and cold chain are the 3 biggest segments in the logistics and warehousing industry in India based on future growth rates. The pressing need for time-sensitive delivery has reshaped the logistics industry as many traditional logistics players are now diversifying their services portfolio to make space for e-commerce logistics. Based on the rise of QSR market in India, cold chain market is also witnessing remarkable growth. The increased foreign trade has led to the CFS/ICD segment of warehousing industry to record impressive growth rates in the recent years and is expected to continue the same for the forthcoming years. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Drive india enterprises solutions ltd • DRS Warehousing South Pvt. Ltd. • Redington (India) Limited • Shalimar Warehousing Corporation • Jeena
Plant capacity: Sacks Storage: 15000000 sacks/annumPlant & machinery: Rs 177 lakhs
Working capital: -T.C.I: Cost of Project: Rs 808 lakhs
Return: 23.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

PCC Electric Poles

Concrete poles were first used over 60 years ago and were then made of normal reinforced concrete. As technology improved, production and use of concrete poles gradually increased. Prestressed concrete poles are highly durable and strong. PSC Poles are fabricated from excellent quality concrete material. These poles are used extensively in electrical industry, for establishing electrical connections and fittings. The poles are ecofriendly and require very low maintenance. The PSC poles have consistent material properties throughout their length. PSC poles are not susceptible to rot and decay. The PSC pole has the same strength throughout its service life. PSC poles are not susceptible to insect and animal attack. The demand for Prestressed (Pre-cast/Reinforced) concrete-cement (PCC) poles directly depends on the growth of electric power sector. The growth in generation and suppy of electric energy gives rise to demands for PCC poles & other systems by way of OEM & replacement/renovation demands. A large network of electricity distribution for rural electrifications, agricultural & irrigational consumptions can be catered to only by establishing an efficient generation & distribution standards. All these factors are essentially going to raise the demand for not only electrical equipments but also distribution materials including poles.Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Arvind Kumar Nand Kumar Ltd. • Ashoka Pre-Con Pvt. Ltd. • Concrete Udyog Ltd. • Genus Power Infrastructures Ltd. • Shri KrsnaUrja Project Pvt. Ltd.
Plant capacity: Prestressed Concrete Cement Electric Poles: 60,000nos/annumPlant & machinery: Rs 304 lakhs
Working capital: -T.C.I: Cost of Project: Rs 713 lakhs
Return: 25.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Paracetamol

Paracetamol, also known as acetaminophen or APAP, is a medication used to treat pain and fever. It is typically used for mild to moderate pain. It is often sold in combination with other ingredients such as in many cold medications. In combination with opioid pain medication, paracetamol is used for more severe pain such as cancer pain and after surgery. It is typically used either by mouth or rectally but is also available intravenously. Effects last between two and four hours. Paracetamol lacks anti-inflammatory action in rheumatic disorders. However, it is less toxic than the Aspirin and does not produce anemia and liver damage, which sometimes result from the continued use of acetanilide and acetophenotidine. It is also an important intermediate in the manufacture of other pharmaceuticals like theantimalarialamodiaquine. The pharmaceutical industry in India ranks 3rd in the world terms of volume and 14th in terms of value. 20% of global exports in generics, making it the largest provider of generic medicines globally. USD 45 Billion in revenue by 2020, revenue of USD 55 billion by 2020 as base case, and can grow to USD 70 billion in a aggressive case scenario. USD 26.1 Billion in generics by 2016. USD 200 Billion to be spent on infrastructure by 2024. Global pharma companies are increasingly exploring low cost option to outsource research and manufacturing, because of emerging slow-down in patented drug sales and high cost of R&D.Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Alta Laboratories Ltd. • Granules India Ltd. • HaffkineAjintha Pharmaceuticals Ltd. • Nalin Chemicals Ltd. • Neelachal Technologies Ltd • Pan Drugs Ltd.
Plant capacity: Paracetamol Tablets: 1500mt/annum Paracetamol Powder: 420mt/annumPlant & machinery: Rs 349 lakhs
Working capital: -T.C.I: Cost of Project: Rs 863 lakhs
Return: 27.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Engineering College (Aeronautical)

Engineering education is the activity of teaching knowledge and principles related to the professional practice of engineering. It includes the initial education (Bachelor and or MastersDegree) for becoming an engineer, and any advanced education and specializations that follow. Engineering education is typically accompanied by additional post graduate examinations and supervised training as the requirements for a professional engineering license. The aeronautical engineers are primarily responsible for creation of safer and more energy efficient economical methods for travelling including aircraft, helicopters, satellites, missiles and space crafts. These includes science of propulsion and aerodynamics, even it covers the development and selection of materials and equipment that are utilized in aircraft. This field is pretty new and under-developed as of now in India, primarily because of the huge investments it requires. The prominent government players, as rightly pointed out by Sanket, are ISRO, HAL, few DRDO labs like GTRE, ADA, DRDL and NAL. A few private companies like Tata, L & T, Mahindra, Taneja too have aerospace divisions, which basically cater to either the Indian government companies that I had mentioned above, or do consultancy activities for foreign aerospace companies. Aerospace engineering is a wide area, and we should not think that being an aerospace engineer means working in the field of aerodynamics or flight dynamics only. The subdivisions of an aerospace engineering curriculum usually consists of courses on propulsion, structures, robotics, navigation, control & guidance, manufacturing, spaceflight, aerodynamics, advanced fluid dynamics, material sciences and flight mechanics.So there are opportunities for Engineers from all Aeronautics, Mechanical, Electronics/Electrical in the industry. There are also challenges for Management professionals but they generally sprout from experience in engineering previous projects. There is a huge market in India for mini UAVs which do not require as large as an investment. There is a huge market for contractors. There is a huge market for maintenance of private & civil aircraft.Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Indian Institute of Technology, (IIT Kharagpur) • Anna University (AU Chennai) • Manipal Institute of Technology (MIT Manipal) • Madras Institute of Technology - Anna University (MIT Chromepet) • Jawaharlal Nehru Technological University (JNTU Kakinada) • Sathyabama University • B.S. Abdur Rahman University (BSAU) COST ESTIMATION CAPACITY Plant & Machinery : Break Even Point : 93%
Plant capacity: Aeronautical Engineering: 60 students/annum Mechanical Engineering: 60 students/annum Civil Engineering: 60 students/annum Aircraft Maintenance Engineering: 60 students/annum Air Hostage Training Course (6 Month Diploma):120 students/annumPlant & machinery: Rs 623 lakhs
Working capital: -T.C.I: Cost of Project: Rs 3336 lakhs
Return: 1.00%Break even: 93.00%
Add to Inquiry Add to Inquiry Basket

Floral Foam

Floral foam is a dense, lightweight and porous material that can be cut into virtually any shape. It holds its shape when wet and provides both water and support to cut flower arrangements. The density of floral foam means that it holds large quantities of water, which in turn, increases the life of flowers. It also provides increased support to the flower stems, giving more control with flower arrangements.Floral foam originally appeared as a green brick. Today, it comes in various colors and a variety of shapes such as spheres, crosses or wreaths suitable for a variety of arranging needs. In addition, floral foam is pH balanced. This means that the acidity of the environment which the flowers are placed in remains at the optimum level ultimately helping your flowers to last. Another important feature of floral foam is how quickly it will soak and absorb water.Floral foams have become a permanent staple in the art of flower arrangement. By providing trouble-free support for flowers, many designs have been made achievable, giving flower arranging artists more room to come up with every design that they can imagine. As we can see that there is great demand for flowers in Indian society for example wedding, Valentine’s Day, birthday, anniversary and many more events. So increase in floriculture means increase in floral foam business.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • SMITHERS-OASIS INDIA PVT.LTD. • Sunflower Floral Foam • VND Cell Plast • AvishkarFloritech Pvt. Ltd. • K. G. Enterprises
Plant capacity: 3,600,000 Pcs/annumPlant & machinery: Rs 69 lakhs
Working capital: -T.C.I: Cost of Project : Rs 270 lakh
Return: 27.00%Break even: 47.00%
Add to Inquiry Add to Inquiry Basket

Spices and Masala Grinding, Blending and Packing

Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome, and bulb) of plants used as a flavoring or seasoning, although many can also be used as an herbal medicine.They impart aroma, color and taste to food preparations. The volatile oils from spices give the aroma and the oleoresins impart the taste. India is the largest producer, consumer and exporter of spices and spice products in the world and produces more than 50 spices. India is also a big exporter of Chilli, turmeric, cumin, pepper and many other spices.There are a number of masalas with various ingredients. Increasing urbanisation paired with a rise in number of working women has reduced the time of cooking. Consequently, home-makers have started demanding readymade spice mixes such as sabzi masala, garam masala, chicken masala etc. This has augmented industry revenues, officials said, as both spice mixes and branded spices entail greater profit margins, as compared to straight and unbranded spices.Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • A D F Foods Ltd. • Aachi Masala Food'S Pvt. Ltd. • AkayFlavours& Aromatics Pvt. Ltd. • Catch Foods (India) Ltd. • Kitchen Xpress Overseas Ltd. • Kohinoor Foods Ltd. • M T R Foods Pvt. Ltd. • Sunrise Foods Pvt. Ltd. • Paras Spices Pvt. Ltd.
Plant capacity: Chole Masala: 400,000 Kgs/annum, Sambhar Masala: 400,000 Kgs/annum, Garm Masala: 400,000 Kgs/annum, Chat Masala: 400,000 Kgs/annum, Meat Masala: 400,000 Kgs/annum, Curry Powder: 400,000 Kgs/annumPlant & machinery: Rs 91 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1004 lakhs
Return: 32.00%Break even: 39.00%
Add to Inquiry Add to Inquiry Basket

Cashew Nut Processing Unit

The cashew nut is a popular dessert nut, eaten out of hand, with other mixed nuts and used in baking and confections. Sixty percent of cashews are consumed as salted nuts. It is also made into cashew butter and nut milk. The nut is high in protein, oil and also vitamins, especially thiamin. The nut makeup is 47% fat, 21% protein, and 22% carbohydrate. Three main cashew products are traded on the international market: raw nuts, cashew kernels and cashew nut shell liquid (CNSL). A fourth product, the cashew apple is generally processed and consumed locally. The raw cashew nut is the main commercial product of the cashew tree, though yields of the cashew apple are eight to ten times the weight of the raw nuts. Raw nuts are either exported or processed prior to export. Cashew is a versatile, though paradoxical nut! Beginning as a poor man’s crop, it ends up as the rich man’s favourite snack-food all over the world. Cashew has gained significant social importance in India as a major foreign exchange earner bringing in foreign exchange of around US$ 500 million per annum. Cashew kernels are a high value luxury commodity with sales growing at a steady rate of 7% each year and there is every likely hood that the market will continue to remain strong.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Amigo Exports Ltd. • M A C Agro Inds. Ltd. • M P S Food Products Ltd. • Maiam Global Foods Ltd. • Nature Bio-Foods Ltd. • Olam Agro India Pvt. Ltd. • Padmavathi Cashews & Coffee Ltd. • Patel Food Product Ltd. • Pioneer Cashew Inds. Ltd. • Tropical Foods Ltd.
Plant capacity: Cashew Nut (W320 Grade) Domestic: 218MT/annum Cashew Nut (W320 Grade) Export: 327MT/annum Cashew Nut (W240 Grade) Domestic: 145.2 MT/annum Cashew Nut (W240 Grade) Export: 217.80 MT/annum Cashew Nut (LWP Grade) Domestic: 148.40 MT/annum Cashew Nut (LWP GraPlant & machinery: Rs 2358 lakhs
Working capital: -T.C.I: Cost of Project: Rs 4477 lakhs
Return: 24.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Wire Nail

Wire nail is very well known item, as it is very common product, which is normally used in daily life. It is used for fastening purpose. Its use is so wide spread that it has become part and parcel of the life. Wire nails are pin-shaped, sharp objects of hard metal or alloy used as fasteners. They are typically made of steel, often dipped or coated to prevent corrosion in harsh conditions or improve adhesion.Ordinary nails for wood are usually of soft, low carbon or mild steel while those for concrete are harder. Nails are used for various purposes and industries ranging from building and construction to carpentry. There is a tremendous variety of nails, since they are used for so many different purposes. There had been an erratic growth of the indigenous industry from past years. Since the manufacture of wire nails could be undertaken on a small scale or even on a cottage scale, there is a mushroom growth of nail making units in operation.Future of wire nails will directly depend upon building activity in country. As we know that at present country is facing acute housing problem. So, now government is much emphasising on housing development, which naturally will lead to greater demand of wire nail.Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Mahalaxmi Traders • JeetmullJaichandlall Madras Pvt. Ltd • H. D. Wires Private Limited • Kamal Wire Industries • Maa Shakti Wires Pvt. Ltd.
Plant capacity: Wire Nail: 369,600 Kgs/annum, Wire Scrap: 34,800 Kgs/annumPlant & machinery: Rs 11 lakhs
Working capital: -T.C.I: Cost of Project: Rs 59 lakhs
Return: 25.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Wire Nail

Wire nail is very well known item, as it is very common product, which is normally used in daily life. It is used for fastening purpose. Its use is so wide spread that it has become part and parcel of the life. Wire nails are pin-shaped, sharp objects of hard metal or alloy used as fasteners. They are typically made of steel, often dipped or coated to prevent corrosion in harsh conditions or improve adhesion.Ordinary nails for wood are usually of soft, low carbon or mild steel while those for concrete are harder. Nails are used for various purposes and industries ranging from building and construction to carpentry. There is a tremendous variety of nails, since they are used for so many different purposes. There had been an erratic growth of the indigenous industry from past years. Since the manufacture of wire nails could be undertaken on a small scale or even on a cottage scale, there is a mushroom growth of nail making units in operation.Future of wire nails will directly depend upon building activity in country. As we know that at present country is facing acute housing problem. So, now government is much emphasising on housing development, which naturally will lead to greater demand of wire nail.Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Mahalaxmi Traders • JeetmullJaichandlall Madras Pvt. Ltd • H. D. Wires Private Limited • Kamal Wire Industries • Maa Shakti Wires Pvt. Ltd.
Plant capacity: Wire Nail: 369,600 Kgs/annum, Wire Scrap: 34,800 Kgs/annumPlant & machinery: Rs 11 lakhs
Working capital: -T.C.I: Cost of Project: Rs 59 lakhs
Return: 25.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 31 of 85 | Total 844 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 31 84 85   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Project Reports & Profiles





Subjects