Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat



The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.


Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.



The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.






MINING & MINERALS:Project Opportunities in Gujarat




Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.


Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.




The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.




Agro and Food Processing: Project Opportunities in Gujarat




Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.



Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.


The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.


SALT INDUSTRY:Project Opportunities in Gujarat




India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.


Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.





Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.



GEMS AND JEWELLERY:Project Opportunities in Gujarat


Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.



Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.



The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.


CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat




The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers



Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.



In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.


TEXTILES:Project Opportunities in Gujarat




The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.


Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.



The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.


Waste management: Project Opportunities in Gujarat



Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.



Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 


National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 61 of 79 | Total 788 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 61 78 79   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Spice Oil Extraction from Curry Leaves (100% EOU)

Murraya koenigii, commonly known as curry leaf or kari patta in Indian dialects, belonging to Famil Rutaceae which represent more than 150 genera and 1600 species1 Murraya Koenigii is a highly values plant for its characteristic aroma and medicinal value. Curry leaves are a rich source of minor constituents, such as Ca, K, Mg, P, along with Fe, Mn, Se and Zn, in trace amounts. Toxic element (As, Cd, Hg and Pb) contents were found to be below USFDA limits. The mineral content of curry leaves are: Fe 152 to 158 mg/kg, Na 795 to 800 mg/kg, Mg 14 to 18mg/kg, Mn 96 to 98 mg/kg. According to the proximate analysis leaves of Murraya Koenejii consists moistures 63%, total nitrogen 1%, fat 6%, total sugar 14%, crude fiber 7% and ash 13%. The curry leaf (Murraya koenigii spreng) has 2.6% volatile essential oils (terpenes: beta caryophylline, beta gurjunene, beta elemene, bete phellandrene, beta thujene and others). These oils in the curry leaf are sufficiently soluble in water and terpenes are lighter than water. The global essential oil market size was valued at USD 3.36 billion in 2015 and is expected to witness an estimated growth rate of 9.0% from 2016 to 2024. Around 200 different types of essential oils are consumed all over the world annually, and the U.S. plays a major role in overall demand. Essential Oil Market is expected to reach $11.188 million by 2022, with a CAGR of 8.7% from 2016 to 2022. Essential oils, also known as volatile oils/aetherolea/ethereal oils, are derived from leaves, stems, flowers, bark, roots, or other parts of a plant. Which facilitates the development of new technologies and ensure a high quality product. Few Indian major players are as under • Concert Spices & Exports Ltd. • Dabur India Ltd. • Gangotri Oils & Agro Products Pvt. Ltd. • Gulab Oil & Foods Pvt. Ltd. • Khandelwal Edible Oils Ltd. • Mahesh Edible Agro Oil Inds. Pvt. Ltd.
Plant capacity: Curry Leave Oil: 500 Kgs. /DayPlant & machinery: Rs 13 lakhs
Working capital: N/AT.C.I: Cost of Project: Rs 152 lakhs
Return: 28.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Rolling Mill

Aluminium foil is aluminium prepared in thin metal leaves, with a thickness less than 0.2 millimetres (8 mils), thinner gauges down to 6 µm (0.2 mils) are also commonly used. Standard household foil is typically 0.016 millimetres (0.6 mils) thick and heavy duty household foil is typically 0.024 millimetres (0.9 mils). Aluminium foil is produced by rolling sheet ingots cast from molten aluminium, then re-rolling on sheet and foil rolling mills to the desired thickness, or by continuously casting and cold rolling. Aluminium foil is a thin sheet of metal. As such it can be an absolute barrier to moisture, gases, odors, bacteria and moulds. There are around 10 Major Aluminium Foil manufacturers in India with rolling capacity of around 10000 tons per month to cater the total demand of around 12000 tons per month in different field of pharmaceuticals and flexible packaging industries. In the present scenario, market demand of the product is growing with a rate of 14.5% per annum. Global demand for aluminium foil is forecast to expand 8.7% p.a. between 2014 and 2018. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under • Amco India Ltd. • Annapurna Foils Ltd. • Archer Metal Ltd. • E C K Haubold & Laxmi Ltd. • Flex Art Foil Ltd. • Gallium Industries Ltd.
Plant capacity: Aluminium Foil Food Grade (thickness 0.006 mm to 0.150 mm): 24 MT/DayPlant & machinery: Rs 310 lakhs
Working capital: N/AT.C.I: Cost of Project: Rs 1252 lakhs
Return: 29.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

LT Cable

A low-tension line is a low voltage line and a high-tension line is a high voltage line. In India LT supply is of 400 Volts for three-phase connection and 230 Volts for single-phase connection. High tension or HT supply is applicable for bulk power purchasers who need 11 kilo-Volts or above. Most small consumers of electricity like individual houses, shops, small offices and smaller manufacturing units get their electricity on LT connection. HT is applicable for bulk purchasers of electricity like industries (big manufacturing units), big offices, Universities, hostels and even residential colonies (if the apartment complexes purchase together in bulk). Cable and wire industry has established itself as one of the backbones of modern information age. The increasing importance for power, light and communication has kept demand high for wire and cable. About 40 per cent of the entire electrical industry is composed by wire and cable industry, and it is expected to be double in the next 5 years. The global wire and cable market is valued at $127 billion in 2010. This market is expected to increase at a 9.4 per cent CAGR to reach nearly $200 billion in 2015. Revenues from the wires and cables industry in the India are expected to expand to INR ~ million in FY'2019 growing with a CAGR of 18.5% from FY'2014-FY'2019. As a whole you can invest in this project without risk and earn profit. Few Indian major players are as under • Aradhya Wire Ropes Pvt. Ltd. • Associated Cables Pvt. Ltd. • Cords Cable Inds. Ltd. • D P Wires Ltd. • D R S Cables Pvt. Ltd. • Deccan Wires & Welding Products Pvt. Ltd. • Excel Controlinkage Pvt. Ltd.
Plant capacity: LT Cable (11 mm-13 mm dia & PVC Copper Cable): 50 KM/DayPlant & machinery: Rs 227 lakhs
Working capital: N/AT.C.I: Cost of Project: Rs 915 lakhs
Return: 28.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

LV Control & Power Cables, MV Cables

An electrical cable is an assembly of one or more wires running side by side or bundled, which is used to carry electric current. A power cable is an electrical cable, an assembly of one or more electrical conductors, usually held together with an overall sheath. The assembly is used for transmission of electrical power. Power cables may be installed as permanent wiring within buildings, buried in the ground, run overhead, or exposed. Flexible power cables are used for portable devices, mobile tools and machinery. Market research analysts at Technavio have predicted that the electric wire and cable market in India will grow steadily during the next four years and post a CAGR of almost 16% by 2020. This market research analysis identifies the growth in renewable power generation to be one of the primary factors for the growth of the electric cable and wire market. One of the primary focus area of the development plan is railways, with over Rs 800,000 crore as promised investment over the period of 2015-2020.In addition, the government has ear marked Rs 50,000 crore (US$ 7.53 billion) to develop 100 smart cities across the country. Thus, due to demand it is best to invest in this project. Few Indian major players are as under • Aradhya Wire Ropes Pvt. Ltd. • Associated Cables Pvt. Ltd. • Cords Cable Inds. Ltd. • D P Wires Ltd. • D R S Cables Pvt. Ltd. • Deccan Wires & Welding Products Pvt. Ltd. • Excel Controlinkage Pvt. Ltd.
Plant capacity: LV Control 3x1.5 mm2 Copper (340 Kgs/KM): 28 KMtrs. /Day Power Cables 7x1.5 mm2 Copper (350 Kgs/KM): 28 KMtrs. /Day MV Power Cables, 1x50 mm2, 1/30 KV Aluminium (780 Kgs/KM): 18 KMtrs. /DayPlant & machinery: 162 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1147 lakhs
Return: 29.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Wall Paper Starch

Starches are inherently unsuitable for most applications and, therefore, must be modi?ed chemically and/or physically to enhance their positive attributes and/or to minimize their defects. Chemical modi?cation of starch generally involves esteri?cation, etheri?cation or oxidation of the available hydroxyl groups on the B-D-glucopyranosyl units that make up the starch polymers.i Reactions used to produce most commercially modi?ed starches have been reviewed by others. Many commercial derivatives are produced by the addition of reactive, organic reagents to aqueous starch slurries while controlling alkalinity (pH 7–9 for esteri?cation and pH 11–12 for etheri?cation) and temperature (typically 60°C). The wall paper starch is used in the fixing of the wallpaper on the walls. This is implied that this shall be directly connected with construction industry and its opportunities. The demand for starches and derivatives looks very promising in India as all the major user segments of starches and derivatives are showing near double digit growth in their production. The major users of starches and derivatives are food, textile, paper and pharma sectors. Global Modified Starch Market was valued at $7,995 million in 2016, and is projected to reach at $10,700 million by 2023, growing at a CAGR of 4.2% from 2017 to 2023. Modified starch is formed by morphological or physicochemical changes in the structure of native starch via its treatment with heat, acids, alkalis, or enzymes. As a whole entrepreneur can venture in this field will be successful.
Plant capacity: Wall Paper Starch: 32 MT /DayPlant & machinery: Rs 52 lakhs
Working capital: N/AT.C.I: Cost of Project: Rs 367 lakhs
Return: 29.00%Break even: 72.00%
Add to Inquiry Add to Inquiry Basket

Spices (Turmeric Powder, Red Chilli Powder, Dhaniya Powder, Garam Masala, Sabji Masala, Popcorn Masala)

Spices impart aroma, color and taste to food preparations. The volatile oils from spices give the aroma and the oleoresins impart the taste. Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome, and bulb) of plants used as a flavoring or seasoning, although many can also be used as an herbal medicine. A closely related term, ‘herb’, is used to distinguish plant parts finding the same uses but derived from leafy or soft flowering parts. The two terms may be used for the same plants in which the fresh leaves are used as herbs, while other dried parts are used as spices, e.g. coriander, dill. India, known as the home of spices, boasts a long history of trading with the ancient civilisations of Rome and China. Today, Indian spices are the most sought-after globally, given their exquisite aroma, texture, taste and medicinal value. India has the largest domestic market for spices in the world. Traditionally, spices in India have been grown in small land holdings, with organic farming gaining prominence in recent times. India is the world's largest producer, consumer and exporter of spices; the country produces about 75 of the 109 varieties listed by the International Organization for Standardization (ISO) and accounts for half of the global trading in spices. As a whole you can invest in this project without risk and earn profit. Few Indian major players are as under • M V J Spices (India) Pvt. Ltd. • Paras Spices Pvt. Ltd. • Spicer India Pvt. Ltd. • Spices (India) Ltd. • Spices Valley Estates Ltd. • Sunrise Foods Pvt. Ltd. • Suruchi Spices Pvt. Ltd.
Plant capacity: Turmeric Powder 100 Kgs. /Day Red Chilli Powder 100 Kgs. /Day Dhaniya Powder100 Kgs. /Day Garam Masala 100 Kgs. /Day Subji Masala100 Kgs. /Day Popcorn Masala100 Kgs. /Day Plant & machinery: Rs 12 lakhs
Working capital: N/AT.C.I: Cost of Project: Rs 120 lakhs
Return: 27.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Silicon Metal

Silicon is the most abundant element in Earth's crust. It is found in rocks, sand, clays and soils, combined with either oxygen as silicon dioxide, or with oxygen and other elements as silicates. Silicon's compounds are also found in water, in the atmosphere, in many plants, and even in certain animals. Silicon is the fourteenth element of the periodic table and is a Group IVA element, along with carbon germanium, tin and lead. Pure silicon is a dark gray solid with the same crystalline structure as diamond. Its chemical and physical properties are similar to this material. Silicon has a melting point of 2570°F (1410°C), a boiling point of 4271°F (2355°C), and a density of 2.33 g/cm3. The Silicon Metal market size will be XX million (USD) in 2022 in India, from the XX million (USD) in 2016, with a CAGR (Compound Annual Growth Rate) XX% from 2016 to 2022. Silicon is the second most common element in the Earth’s crust, although it is hard to find it in nature as a pure element. China is by far the world’s largest producer of silicon, including thereby silicon content for ferrosilicon and silicon metal. Around 4.6 million metric tons of silicon was produced in China in 2016 which accounted for about two-thirds of global production that year, which reached about 7.2 million metric tons. The global silicon metal market was valued at US$ 2.21 Bn in 2015 and is anticipated to reach US$ 3.48 Bn by 2024, expanding at a CAGR of 5.2% between 2016 and 2024. As a whole there is a good scope for new entrepreneur to invest in this business.
Plant capacity: Silicon Metal: 25 MT /DayPlant & machinery: Rs 1277 lakhs
Working capital: N/AT.C.I: Cost of Project: Rs 2484 lakhs
Return: 28.00%Break even: 74.00%
Add to Inquiry Add to Inquiry Basket

I.V. Fluids (BFS Technology)

Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through the circulatory system. These fluids must be sterile to protect patients from injury, and there are a number of different types available for use. Fluids are given when someone's body fluid volume falls. There are a number of things which can cause a drop in fluid volume. Vomiting and diarrhea are a classic example, which is why people are encouraged to drink fluids when they are sick, to keep their fluid volume stable. Intravenous fluids can also be used as a route of medication administration. The Indian pharmaceutical industry is the fourth largest in the world in terms of volume of output and thirteenth in domestic demand. However, the Indian industry, valued at USD 17 bn in represented just over 1% of the global pharmaceutical industry (USD 1700 bn) in value terms. The domestic market is estimated at Rs 680 bn. India has the world's third largest active pharmaceutical ingredients (API) for the industry valued at a little less than USD 2 bn. These new business streams would help growth in future earnings. Intravenous (IV) fluids market in India is around Rs. 3,000 crore growing at healthy rate of around 15-20 per cent a year due to its essential requirement in nature. Which facilitates the development of new technologies and ensure a high quality product. Few Indian major players are as under • Abaris Healthcare Pvt. Ltd. • Ahlcon Parenterals (India) Ltd. • Axa Parenterals Ltd. • Infutec Healthcare Ltd. • Kokad Pharmaceutical Laboratories Ltd. • Parenteral Surgicals Ltd. • Punjab Formulations Ltd.
Plant capacity: I.V. Fluid (500 ml.): 48000 Bottles /DayPlant & machinery: Rs 252 lakhs
Working capital: N/AT.C.I: Cost of Project: Rs 833 lakhs
Return: 29.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Hydro based Power Plant

Hydropower is a renewable energy resource that utilizes Earth’s water cycle to generate electricity. The movement of water flow downstream in lakes and rivers creates kinetic energy that id converted into electricity. The energy generated by running water has been utilized for many decades. The well-established hydroelectric power plant consists of a high dam built across a large river to create a reservoir and a station where the process of energy conversion to electricity occurs. The initial step in the generation of energy in a hydropower plant is the collection of run-off of seasonal rain water, snow in lakes, streams and rivers. All this water is collect in dams downstream. Then the water is made to falls through a dam into the hydropower plant and rotates a large wheel called a turbine. The turbine then converts the energy of falling water into mechanical energy to drive the generator. The electricity thus obtained is transferred to the communities through transmission lines. The water is then released back into the lakes, streams or rivers About 26% of energy is contributed by hydro power to India. For India, the total capacity is more than 2 Lakh MW and so hold the 5th position for electricity generation in the world. The major electricity resources plant are thermal, hydro, nuclear and other renewable energy resources which includes solar, wind, geothermal, tidal, etc. Growing focus toward adoption of renewable energy integration coupled with its wide applications range including water supply for irrigation and flood control will propel the hydropower market growth. Increasing demand for reliable and continuous electricity along with rising measures to reduce carbon footprints will stimulate global hydropower market.
Plant capacity: 10 MWPlant & machinery: 6100 Lakhs
Working capital: -T.C.I: Cost of Project: 8014 Lakhs
Return: 15.00%Break even: 69.00%
Add to Inquiry Add to Inquiry Basket

Floral Foam

Floral foam is a dense, lightweight and porous material that can be cut into virtually any shape. It holds its shape when wet and provides both water and support to cut flower arrangements. The density of floral foam means that it holds large quantities of water, which in turn, increases the life of flowers. It also provides increased support to the flower stems, giving more control with flower arrangements. Floral foam originally appeared as a green brick. Floral foams have become a permanent staple in the art of flower arrangement. By providing trouble-free support for flowers, many designs have been made achievable, giving flower arranging artists more room to come up with every design that they can imagine. Made of phenol material, floral foams are used as a base for mostly every conceivable design. Government of India has identified floriculture as a sunrise industry and accorded it 100% export oriented status. Owing to steady increase in demand of flower floriculture has become one of the important Commercial trades in Agriculture. Indian floriculture industry comprises the florist trade, nursery plants, bulb and seed production, apart from production of micro propagation material, and extraction of essential oils from flowers. The industry has been growing at a CAGR of 25 percent over the past decade. As a whole any entrepreneur can venture in this project without risk and earn profit.
Plant capacity: 12000 Pcs./DayPlant & machinery: 68 lakhs
Working capital: -T.C.I: Cost of Project : Rs 270 lakhs
Return: 27.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 61 of 79 | Total 788 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 61 78 79   Next »


Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top

Products & Services


Contact Us

My Account


Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search

Search Project Reports & Profiles