Google Search

Search

Already a Member ?

Projects for Small and Medium Enterprises (SME). Profitable Manufacturing Business Ideas to Start. Small Scale Industry. Business Ideas To Make Money.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 4 of 12 | Total 116 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Broom Stick Processing Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Broom stick is well known to all. It has been largely used by domestic people, commercial complexes, industrial people etc. It is generally prepared by using coconut leaves or special type of bamboos. There is a good market demand of this product and it? s associated product like handle. As a whole the project is underlying scale or small-scale agro based as well as waste recycle based. There is a scope for new entrepreneur to enter into this field.
Plant capacity: 10,000 Nos./DayPlant & machinery: Rs. 21 Lakhs
Working capital: -T.C.I: Rs. 56 Lakhs
Return: 44.01%Break even: 66.65%
Add to Inquiry Add to Inquiry Basket

Artificial Marble Tiles - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

With the vast potential of plastics, artificial synthetic marble is virtually replacing the use of natural marble. The qualities of artificial synthetic marble are very much the same as those of natural marble. Synthetic marble is produced out of fillers and synthetic resin is used as binder. The main advantage of synthetic marble (cultured marble) are its high strength values, low shrinkage, minimum water absorption, resistant to corrosion, ageing and weather resistant to aggressive media, easy maintenance and high abrasion resistance etc. Calcium carbonate fillers are the most widely used filler for the preparation of filled compositions and moulding. Calcium Carbonate fillers are low in cost and is one of the largest applications of artificial, synthetic or cultured marble. Cultured marble is more durable than natural quarried marble. It is more resistant to stains, wear and damaging effects of household chemicals. The major areas where artificial marble tiles can be advantageously used are roofings, flooring, tiles used as wall products in different designs and castings. The artificial marble tiles are gaining varied application in building project which are developing very fast.
Plant capacity: 3 MT/DayPlant & machinery: Rs. 17 Lacs
Working capital: Rs. 48 LacsT.C.I: Rs. 107 Lacs
Return: 53.21%Break even: 44.05%
Add to Inquiry Add to Inquiry Basket

Brake Lining - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Plant capacity: 1000 No./DAYPlant & machinery: Rs. 5 LAKHS
Working capital: -T.C.I: Rs. 40 LAKHS
Return: 53.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Clutch plate for four wheelers - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Plant capacity: 600 No./DAYPlant & machinery: Rs. 12 LAKHS
Working capital: -T.C.I: Rs. 56 LAKHS
Return: 49.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Hydraulic Hoses for Heavy Earth Movers - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Hydraulic hoses are largely used in the supplying of water from one place to another place, in the agriculture in the fire brigade, in the civil construction area etc. There is wide varied diameter are used in the manufacturing processes of hydraulic hose. It should not corrosive or not attached the human body any way. It should work at minimum temperature 50°C. The basic raw materials used are (1) wires and (2) fiber reinforced rubber. There is good market growth of hydraulic hoses and market demand is meet up by indigenous production. There is almost no environmental pollution problem. Any new manufacturer may enter into the production will be successful if he manufacture quality product with economic price. There good scope for this business days to come.
Plant capacity: 150000 Meter/ AnnumPlant & machinery: 19 Lacs
Working capital: -T.C.I: Rs. 54 LAKHS
Return: 37.92%Break even: 55.32%
Add to Inquiry Add to Inquiry Basket

Seamless M. S. Tubes & Pipes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Seamless M. S. pipes and tubes products may be made better or electric welding formed skelp, piercing, extrusion. Piercing and extrusion methods are used for seamless tubing which is used in high-temperature and pressure applications as well as for transporting gas and chemical liquids. Seamless steel pipe up to 400 mm in diameter has been manufactured. Extruded tubes are also used for gun barrels, since the process can be adapted to internal configurations such as rifling and grooves. But welded pipe is the most common and is used for structural purposes, posts and for conveying gas, water and wastes etc. The electric welded pipe is used primarily for pipelines carrying petroleum produces for water. There will be bright future for new entrepreneurs or the expansion of the existing
Plant capacity: 800 Kg/DayPlant & machinery: 8 Lacs
Working capital: 24 LacsT.C.I: 56 Lacs
Return: 21.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Glass Reinforced Concrete - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Glass reinforced concrete is a composite material consisting of a mortar of hydraulic cement and fine aggregate reinforced with alkali resistant glass fibers. The properties of GRC depend on a wide range of variables. It includes method of manufacture, mix formulation. Fibre product type, length and orientation, admixtures used, etc. AGRC material may therefore be tailored to meet the particular requirement of a specific application. As the construction industries growth increase by 8% per annum on that basis it can be predicted that there will be growth of GRC industries at the rate of 8% per annum.
Plant capacity: 6000 MT GRC Mix/AnnumPlant & machinery: Rs. 14 Lakhs
Working capital: Rs 34 LakhsT.C.I: Rs 81 Lakhs
Return: 39.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Rock Wool Base Slag - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

There has been a little war going on out there b/w silicon and titanium, both metallic components of the sands around the world. Not long ago, the very year, the commonwealth scientific and industrial research organization of Australia, uncovered the excellent filtration properties of what they called ‘nano-porous’ titanium dioxide molecules. There will gradually replace silicon sand as filtration medium in many applications in the near future- especially where pollution control is improved, quite like aluminium is very slowly ousting steel from the latter’s smaller bastion. Aluminium titanate has been proven to be a better refractory material in die-costing applications, as compared to calcium silicate and fused silica, which are conventionally used. If the cost of these three applications are to be compared, it is obvious that silica and calcium oxide are much more cheaper then alumina & titania. There is demand of rock wool in our country of about more than 1500 MT per annum. Increase in demand is about 18% per annum.In future demand of rock wool will increase by 2% per annum from the persent demand.
Plant capacity: 1 MT/DayPlant & machinery: Rs. 18 Lakhs
Working capital: N/AT.C.I: Rs 63 Lakhs
Return: 51.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Water Proofing Liquid And Powder (Concrete And Mortar Admixture) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

The invention of air entraining agents in 1939 has been termed a revolutionary development in concrete technology. The basic function of an air-entraining agent is freeze thaw resistance, which was causing a lot of problems in cold countries. It has been found that there is good increase of construction industry now a days. On the basic it can be predicted that there will be good demand of water proofing compound used in the concrete and mortar admixture. There is good scope for new entrants in this field.
Plant capacity: 2 MT/DayPlant & machinery: Rs. 19 Lakhs
Working capital: Rs. 62.00 LakhsT.C.I: Rs. 123.00 Lakhs
Return: 46.00%Break even: 64.00%
Add to Inquiry Add to Inquiry Basket

PLY BOARD FROM BAMBOO - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Ply Board is wooden made board or wooden like raw materials largely used for making ply board. There is large use of ply board nowadays in making wooden base furniture. Bamboo can be used for making ply board. There is large amount of bamboo available in our country. Bamboo on special processing can be converted into ply board. Matured bamboos are used for making ply board. There is very good rising demand of ply board. For meet up the demand of ply board few new entrepreneurs can start this industry. In this process solid waste may be come up which can be recycled or can be further processed for making organic fertilizer. Bamboo Board The increasing shortfall of wood is giving rise to the development of non-wood materials. The development of bamboo-board is expected to relieve the pressure on wood, as the raw material is available at a much faster rate. Bamboo is harvested in a four to five year cycle against 40 years for medium density hardwood species used for plywood. The first bamboo-based panel was developed in China in the 1940s. Since then, some 28 panel products have been developed. In spite of this, the commercialization of bamboo panels has not been commensurate with the variety of products developed, mainly because only a few technologies have come out of detailed investigations and industry-scale trials. In the search for non-timber forest products to substitute wood, bamboo has emerged as a material par excellence. It is now widely recognized that bamboo in panel form is ideal to replace wood in several applications. It is in great demand in designer homes as flooring, walling, and paneling material. Based on the culm derivatives used, the boards may be grouped in the following categories : Culms converted into slivers, strips or lathes by flattening and/or cutting, and further processed, Culms peeled into veneers and further processed, Culms converted into particles, fibers, wafers or strands and reconstituted, Combination of one or more of above products among themselves or with other materials and further processed. Such composits include: different bamboo panels; wood or other lignocellulosic materials; and inorganic substances, Various types of bamboo boards are made from Bambusa bambos, B. polymorpha and Dendrocalamus strictus. Building-Board - There is a great demand for panel materials of all kinds in the building and furniture industry. Chemically processed bamboo strips or veneers are interwoven into mats. They are pressed together at high temperature to form boards properties of larger sizes of different properties with uniformity of strength in the principal directions. Flattening and widening of bamboo can also make boards. The processes involved in manufacture of building boards include defibering, thermal hydrolysis, mixing shavings with resin and finally pressing of resin treated bamboo mats. These boards have a pleasing appearance and adequate strength and optimum hygroscopicity. Boards from slivers, strips or lathes - Slivers of uniform thickness and width are woven into mats, following traditional or innovative designs and cold or hot pressed into boards. Particleboard - In India only a small quantity of bamboo particleboard (about 1500 tonnes/year) is produced. As a common national standard exists for particleboard produced from all lignocellulosic materials, bamboo particleboard requires to conform to IS : 30871985 (Standard Specification for Medium Density Wood Particle board for General Purposes). Bamboo strip, wood veneer and particleboard - Bamboo strip board forms the face. Wood veneer and particleboard are used as core. Bamboo mat boards - Bamboo mat board is the first bamboo-based panel to be produced commercially. Its versatility has been widely recognized. It is commercially produced in China (under the name bamboo mat plywood), India, Thailand and Vietnam. One of the major uses of bamboo mat boards is in building interiors and construction. Because of its aesthetic appearance the board finds ready acceptance as paneling material in place of decorative plywood or other pre-laminated panel materials. Boards being phenol bonded are very durable as compared to commercial panel materials. A factory in Kerala State started manufacturing Bamboo mat board in 1984 using the modified technology. This factory is still producing bamboo mat board, with slight modifications of the process, and marketing it for use in furniture, housing and shuttering. Bamboo mat and rice husk board - Bamboo mat is used as face and rice husk particleboard as core. It is produced in small sector industry in India. Stringer type board - In addition to flat ones, some mats are made in the form of bamboo tubes or the required size and treated with phenolic resin. Rectangular split steel mandrels are driven into these and are placed between two sets of flat mats in a continuous raw and pressed in a mould with side pressure. The bamboo boards can also be faced with fancy veneers or metals when covered with special type of wood shavings or bamboo shavings which can be dyed, they make attractive material for application in housing, decking, flush doors etc. Bamboo boards buried in test yards for more than eleven years were found to be unaffected by termites and fungi. Their resistance to fire is also similar to that of wood.
Plant capacity: Plant & machinery: Rs 42 Lakhs
Working capital: -T.C.I: Rs 114 Lakhs
Return: 41.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 4 of 12 | Total 116 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top