Google Search

Search

Already a Member ?

Investment Opportunities & Business Ideas in Mexico, North America - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 32 of 192 | Total 1912 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 32 191 192   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

STAINLESS STEEL TUBES / PIPES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Stainless Steel tubes are widely used in the dairy & food processing industries, heat exchangers, evaporators, cooling units, stock lives and condensers, such as those used in chemical digestive food liners, blow lines, evaporation pulp and paper industry, pharmaceutical industry production flow lines, aircraft tubing, hydraulic lines, air conditioning and pressurizing tubes, oil lines, electrical controls and switches, fuel lines, flexible joints & connections, exhaust turbine assemblies, oxygen tanks, stationary, etc. so there is a good demand of such products. The demand for steel pipes and tubes is increasing day by day, especially in the automobile industry.
Plant capacity: 600 MT/Annum Plant & machinery: 101 Lakhs
Working capital: -T.C.I: Cost of Project : 282 Lakhs
Return: 41.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

BENTONITE PROCESSING & PULVERISING - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Plant Layout

Bentonite comes under the speciality of clay which has large use in the chemical industries, oil refineries, cosmetic industries, etc. Before mining of bentonite, testing of bentonite quality and area available are required to be done. Bentonite is used as fullers earth, emulsifiers for oils, base for plaster, pharmaceutical aids, sealant for canals, walls and in cosmetics. It can also be used as an asphalt modifier and as a filler in ceramics, paper coatings, and refractories. Other applications are found in industries as a bonding agent in foundry sands & palletizing of iron ores and as a thickener in lubricating grease and fire proofing compositions. Bentonite as mineral is available in black and yellowish colour. There is good market demand of bentonite powder. New entrepreneurs can well venture into this field.
Plant capacity: 100 MT/Day Plant & machinery: 4 Crores
Working capital: -T.C.I: 7 Crores
Return: 36.00%Break even: 47.00%
Add to Inquiry Add to Inquiry Basket

DICALCIUM PHOSPHATE (DENTIFRICE GRADE) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Dicalcium phosphate is of great interest to tooth paste manufactures. It is used in toothpaste in its anhydrous variety. Although this product is not included in the accepted dental remedies, it is nevertheless used because of its considerably higher abrasive power compared to dehydrate. The demand of dicalcium phosphate is increasing day by day. To cater the demand of the product, more number of units should be set up for the manufacture of this product.
Plant capacity: 3000 MT/Year Plant & machinery: 11 Crores
Working capital: -T.C.I: Cost of Project : 13.6 Crores
Return: 43.00%Break even: 32.00%
Add to Inquiry Add to Inquiry Basket

SEAMLESS TUBES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

Manufacturing of steel tubes and pipes is basically a large scale engineering industry. Mild steel demand as raw material for pipe and tubes manufacture units are fully met with indigenous sources. Seamless tubes have a variety of uses. They are used in boilers, bearings, hydraulic cylinders, generic engineering equipment and oil exploration,
Plant capacity: 1,20,000 MT/Annum Plant & machinery: 653 Lakhs
Working capital: -T.C.I: Cost of Project : 2274 Lakhs
Return: 46.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

FILTERATION AND AIRTIGHT PACKING OF COCONUT OIL - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Coconut oil, also known as coconut butter, is a tropical oil with many applications. It is extracted from copra (derived from the word "kopra" which means dried coconut). Coconut oil constitutes seven percent of the total export income of the Philippines, the world's largest exporter of the product. Coconut oil is a fat consisting of about 90% saturated fat. The oil contains predominantly medium chain triglycerides, with roughly 92% saturated fatty acids, 6% monounsaturated fatty acids, and 2% polyunsaturated fatty acids. Of the saturated fatty acids, coconut oil is primarily 44.6% lauric acid, 16.8% myristic acid a 8.2% palmitic acid and 8% caprylic acid, although it contains seven different saturated fatty acids in total. Its only monounsaturated fatty acid is oleic acid while its only polyunsaturated fatty acid is linoleic acid. Unrefined coconut oil melts at 24-25°C (76°F) and smokes at 170°C (350°F),while refined coconut oil has a higher smoke point of 232°C (450°F). Among the most stable of all oils, coconut oil is slow to oxidize and thus resistant to rancidity, lasting up to two years due to its high saturated fat content.[citation needed] In order to extend shelf life, it is best stored in solid form (i.e. below 24.5°C [76°F]). Coconut oil is used in volume quantities for making margarine, soap and cosmetics.Hydrogenated or partially-hydrogenated coconut oil is often used in non-dairy creamers, and snack foods.Fractionated coconut oil is also used in the manufacture of essences, massage oils and cosmetics Coconut oil is an important component of many industrial lubricants, for example in the cold rolling of steel strip.Coconut oil has to be refined and filtered, and then only it can be used for edible purposes. The fine primary functions for are: hygiene, protection, customer convenience, identification & sales appeal and facts. Coconut oil is used in India as a cooking fat, hair oil, body oil and industrial oil. Coconut oil is made from fully dried copra having maximum moisture content of six per cent. Steam cooking of copra is also practised by some millers to enhance the quality and aroma of oil. Coconut oil is marketed in bulk as well as in packs ranging from sachets containing 5 ml. to 15kg tins. The branded coconut oil in small packs is mainly marketed as hair oil and body oil. There are several brands known for their superior grade oil which have export market throughout the world. India has unbeatable quality advantage in this sector. Refined coconut oil is also manufactured in the country for industrial uses. Refined coconut oil is mainly used in the manufacture of biscuits, chocolates and other confectionery items, ice cream, pharmaceutical products and costly paints. Generally, filtered coconut oil is used for cooking and toiletry purposes. India accounts for nearly 20% of global coconut output. Coconut oil is the main cooking oil in the south Indian State of Kerala. Kerala, Tamil Nadu, Andhra Pradesh and Maharashtra are leading producers of coconut in the country. Kerala and Tamil Nadu are the major centres of coconut oil and copra in the country. Besides cooking coconut oil is also used extensively on cosmetics, toiletries, hair tonics and slew of other industries. The price of coconut oil is shaped by variations in production, global demand and supply situation and price of other vegetable oils.
Plant capacity: 600 Tons/Annum Plant & machinery: 19 Lakhs
Working capital: -T.C.I: Cost of Project : 94 Lakhs
Return: 43.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

FILTRATION AND AIRTIGHT PACKING OF COCONUT OIL - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Coconut oil, also known as coconut butter, is a tropical oil with many applications. It is extracted from copra (derived from the word "kopra" which means dried coconut). Coconut oil constitutes seven percent of the total export income of the Philippines, the world's largest exporter of the product. Coconut oil is a fat consisting of about 90% saturated fat. The oil contains predominantly medium chain triglycerides, with roughly 92% saturated fatty acids, 6% monounsaturated fatty acids, and 2% polyunsaturated fatty acids. Of the saturated fatty acids, coconut oil is primarily 44.6% lauric acid, 16.8% myristic acid a 8.2% palmitic acid and 8% caprylic acid, although it contains seven different saturated fatty acids in total. Its only monounsaturated fatty acid is oleic acid while its only polyunsaturated fatty acid is linoleic acid. Unrefined coconut oil melts at 24-25°C (76°F) and smokes at 170°C (350°F),while refined coconut oil has a higher smoke point of 232°C (450°F). Among the most stable of all oils, coconut oil is slow to oxidize and thus resistant to rancidity, lasting up to two years due to its high saturated fat content.[citation needed] In order to extend shelf life, it is best stored in solid form (i.e. below 24.5°C [76°F]). Coconut oil is used in volume quantities for making margarine, soap and cosmetics.Hydrogenated or partially-hydrogenated coconut oil is often used in non-dairy creamers, and snack foods.Fractionated coconut oil is also used in the manufacture of essences, massage oils and cosmetics Coconut oil is an important component of many industrial lubricants, for example in the cold rolling of steel strip.Coconut oil has to be refined and filtered, and then only it can be used for edible purposes. The fine primary functions for are: hygiene, protection, customer convenience, identification & sales appeal and facts. Coconut oil is used in India as a cooking fat, hair oil, body oil and industrial oil. Coconut oil is made from fully dried copra having maximum moisture content of six per cent. Steam cooking of copra is also practised by some millers to enhance the quality and aroma of oil. Coconut oil is marketed in bulk as well as in packs ranging from sachets containing 5 ml. to 15kg tins. The branded coconut oil in small packs is mainly marketed as hair oil and body oil. There are several brands known for their superior grade oil which have export market throughout the world. India has unbeatable quality advantage in this sector. Refined coconut oil is also manufactured in the country for industrial uses. Refined coconut oil is mainly used in the manufacture of biscuits, chocolates and other confectionery items, ice cream, pharmaceutical products and costly paints. Generally, filtered coconut oil is used for cooking and toiletry purposes. India accounts for nearly 20% of global coconut output. Coconut oil is the main cooking oil in the south Indian State of Kerala. Kerala, Tamil Nadu, Andhra Pradesh and Maharashtra are leading producers of coconut in the country. Kerala and Tamil Nadu are the major centres of coconut oil and copra in the country. Besides cooking coconut oil is also used extensively on cosmetics, toiletries, hair tonics and slew of other industries. The price of coconut oil is shaped by variations in production, global demand and supply situation and price of other vegetable oils.
Plant capacity: 600 Tons/Annum Plant & machinery: 19 Lakhs
Working capital: -T.C.I: Cost of Project : 94 Lakhs
Return: 43.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

Pre-painted Coloured Galvanized Roofing Steel Sheet (Plain & Corrugated) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

There is significant increase in demand for pre-coated galvanized sheet-for industrial, storage and warehousing projects. In USA & Europe 55% Aluminium Zinc coated steel is used for roofing which gives increased life compared to ordinary coated sheets. The corrugated galvanized iron sheets are extensively used in various fields e.g. Industrial sheds, dairy farm sheds, poultry farm sheds and warehouses etc. for roofing purpose. It is observed that asbestos cemented roof sheet, plastic corrugated sheet, and red mud sheets are also used in the construction of industrial shed. However, the use of asbestos sheet is not preferred and there is a potential for growth of this product, in industrial projects, warehouses and storage establishments.
Plant capacity: 15 MT / DayPlant & machinery: 58 Lakhs
Working capital: -T.C.I: 793 Lakhs
Return: 50.00%Break even: 27.00%
Add to Inquiry Add to Inquiry Basket

Ilmenite Beneficiation - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Ilmenite is the most common of the titanium minerals and is frequently associated with magnetite. Ilmenite is a iron black minerals black to brownish red streak, submetallic lustic and is having a resenlance, magnetite in appearance but is readily distinguished by feeble magnetic character and it is used widely in US, Canada, Sweden, Russia & India. The demand of the product is increasing day by day and at present there are very few manufacturers of the product in India. Hence, there is good scope for new investment and a new entrepreneur can well venture in this field will find it a lucrative business.
Plant capacity: 30 MT / DayPlant & machinery: 361 Lakhs
Working capital: -T.C.I: 2074 Lakhs
Return: 42.00%Break even: 35.00%
Add to Inquiry Add to Inquiry Basket

Toughened Glass - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Toughened glass is a type of soda-lime-silica glass which has been mechanically strengthens by a thermal process in which a layer of compression has been introduced at the surface. Its main usage is in automotive, architectural, photo etc. Toughened glass cannot be supplementary worked by cutting, drilling etc., as this would result in the sudden shattering of the product. The main raw material for the making of toughened glass is flat glass sheets. Due to its vast consumption in automobile sector, the end of 2009, the estimated demand of that glass in India (assuming an increase of 10 percent annum) will be 170 million square metres per annum whereas supply will touch at least – 220 million square meters / yr of hot glass it will become necessary to generate additional domestic demand.
Plant capacity: 30 MT / DayPlant & machinery: 140 Lakhs
Working capital: -T.C.I: 1334 Lakhs
Return: 49.00%Break even: 27.00%
Add to Inquiry Add to Inquiry Basket

Refined Vegetable Oil - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Refined vegetable oil is considered to be high quality edible oil because of its non-cholesterol properties. Its main use in the world is in cooking, pharmaceuticals, bakery goods & other edible products. In refined vegetable oil, the term refining is applied to the operation of pretreatment and de-acidification or neutralization, its complete process involves bleaching & deodorization. The oil is basically produced from four different seeds which are edible in nature. The demand of refined vegetable oil is increasing day by day because of its large consumption in bakery & pharmaceuticals.
Plant capacity: 75 MT / DayPlant & machinery: 141 Lakhs
Working capital: -T.C.I: 3395 Lakhs
Return: 55.00%Break even: 22.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 32 of 192 | Total 1912 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 32 191 192   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top