Google Search

Search

Already a Member ?

Investment Opportunities & Business Ideas in Ghana, West Africa - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 17 of 247 | Total 2465 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 246 247   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Rubber Gaskets - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

There is competitive growth of rubber gaskets in market. Gasket should be smooth, inert -towards water and normal chemicals, physically strong and should not be corrosive. It is mainly used between the pipelines to make leak proof alignment or joint. It has been found that the growth rate of rubber gasket for water pipelines, automobiles etc. are likely 5%, which is already covered by the existing units. Thus new entrepreneur can inter & service only if he take care about good quality of product.
Plant capacity: 200.00 KGS/dayPlant & machinery: Rs. 18 Lakhs
Working capital: -T.C.I: Rs. 60 Lakhs
Return: 57.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Mosquito Coil And Mats - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Mosquitoes not only suck human blood but also transport disease like malaria. Mosquito coil is used for repelling and killing of insects like flies, mosquitoes etc. It protects human bodies from mosquitoes without coming into direct contract of human body. It has great demand in India as well as outside India. The competition in this line is very less and its scope of consumption is very large. Since it has more demand, so there is a good scope for new entrants.
Plant capacity: Mosquito Coil 3500 Pkts./Day, Mosquito Mats 1000 Pkts/Day Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Paper Napkins, Facial Paper & Toilet Rolls From Tissue Paper Rolls - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Due to Govt. emphasis for popularizing tourism, number of new hotels, holiday resorts, restaurants etc. have demand of paper conversion products like Paper Napkins, facial paper etc. Paper napkins, facial paper & toilet rolls obtained from tissue paper are absorbent, lightweight & hygienic, Paper Napkin is used in hotels, restaurants and as a substitute of handkerchief. There is good demand of tissue paper rolls both internal & for export. So, there is good scope for new entrants.
Plant capacity: 2 Mt Toilet Rolls, 2 Mt Facial Paper, 6 Mt Paper Napkin (Per Day) Plant & machinery: Rs. 41 Lakhs
Working capital: -T.C.I: Rs. 600 Lakhs
Return: 69.00%Break even: 23.00%
Add to Inquiry Add to Inquiry Basket

Admixtures for Concrete - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Admixtures are materials added to the concrete before or during its mixing, with a view to modify one or more of the properties of concrete in the plastic or hardened state. It is used to refundor accelerate the setting time of concrete by a few hours. It also improves the cohesion of poorly graded concretes. Its demand and supply gap is nearly equal. So, a new comer may approach to start the production with a quality conscious and competitive market.
Plant capacity: 500 kg. Air Entraining Admix, 500 kg. Accelerating Admixture, 500 kg. Retarding Admixture, 500 kg. Water Reducing Admix (PER DAY) Plant & machinery: Rs. 10 Lakhs
Working capital: -T.C.I: Rs. 162 Lakhs
Return: 51.00%Break even: 31.00%
Add to Inquiry Add to Inquiry Basket

Bitumen - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

It is non crystalline solid or viscous material having adhesive properties, which is completely soluble in carbon disulfide. It is generally brown or black in colour, electrical resistance, solubility or resistance to solvent action and resistance to oxidation under various conditions. It is derived from petroleum either by natural or refinery processes. Due to its low cast and readily availability it is used not only for road construction and maintenance but also for engineering fields has good demand due to its range of applications. New entrepreneurs can enter in this field.
Plant capacity: 20 Tonne/day Plant & machinery: Rs. 14 Lakhs
Working capital: -T.C.I: Rs. 71 Lakhs
Return: 41.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Cement From Rice Husk - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Rice husk gives a good quality of pozzolanio ash containing silica, which is considered a good substitute for cement. It is prepared by first burning husk to form ash and then mixing it with lime and grinding it to a very fine powder. Cement is a very important building material, but today it is very much short in supply. With the increase in constructional activities its demand will also increase. The export demand is estimated to be 3 percent of the total production. The new entrepreneur can enter in this project.
Plant capacity: 50 MT/day Plant & machinery: Rs. 98 Lakhs
Working capital: -T.C.I: Rs. 203 Lakhs
Return: 28.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Low Carbon Ferro Manganese - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Low carbon ferro manganese is made by reaction of silicon present in silicon manganese or low carbon manganese with manganese ore and lime. These cannot be produced directly from manganese ore and carbon due to co-smelting of gangue constituents. Their carbon contents ranges from 0.1% to 1.5%. These are required where carbon control in steel is strictly necessary. These are also used for the purpose of allowing and deoxidation and as cleaning agent. Their total indigenous production is above 50%. India is also exporting these ferro manganese to various countries like Germany, France etc. So, there is a good scope for new entrants.
Plant capacity: 50.00 MT/day Plant & machinery: Rs. 120 Lacs
Working capital: -T.C.I: Rs. 1300 Lacs
Return: 75.00%Break even: 34.00%
Add to Inquiry Add to Inquiry Basket

Meter Gauge Concrete Sleeper - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Meter Gauge Concrete Sleeper has a resilient bar; attached with flanges, key insert, refraining black and rail. It can bear variable compression load and is resistant to climatic conditions like heat, cold or rain. It is used to make railway track formation of meter gauge. With the expansion and development of railways its demand is increasing rapidly. As a whole there is good future for existing as well as new entrepreneurs.
Plant capacity: 100.00 NOS/day Plant & machinery: Rs. 42 Lakhs
Working capital: -T.C.I: Rs. 254 Lakhs
Return: 45.00%Break even: 36.00%
Add to Inquiry Add to Inquiry Basket

Rumen By Pass Fat Used In Cattle Feed - Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Rumen by pass fat supplement the diet of livestock with unsaturated fatty acids. Unsaturated fatty acid are known to be more digestable and are more beneficial after digestion to animals. Here people are not so careful about the health of the ruminant. There is no confirmed manufacturers available in India, so there is a good opportunity for new manufacturers to enter in this project.
Plant capacity: 300MT/AnnumPlant & machinery: Rs. 24 Lakhs
Working capital: -T.C.I: Rs. 98 Lakhs
Return: 39.00%Break even: 62.00%
Add to Inquiry Add to Inquiry Basket

Alumina to Aluminium and manufacturing of profiles - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Cost of Project

Aluminium is the most abundant metal in the world. When it is alloyed with other material like magnesium, is employed in structures for air craft, automobiles, for electrical conductors etc. Global Aluminium demand is estimated to rise at a compounded annual growth rate 5% in the next couple of years, as compared with a growth rate of 33% over the past decade. The Indian aluminium industry is going through an expansionary phase in order to meet the increasing demand. So, it will be profitable for the new entrants to invest in this project.
Plant capacity: Aluminium Bar 40000 MT, Aluminium Profiles 20000( Per Annum) Plant & machinery: RS. 258 Crores
Working capital: RS. 364 CroresT.C.I: -
Return: 38.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 17 of 247 | Total 2465 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 246 247   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top