Google Search

Search

Already a Member ?

Edible Oils, Non Edible Oils, Fats, Vegetable Fats and Oils, Corn Oil, Cooking Oils, Rice Bran Oil, Castor Oil, Sesame Oil, Linseed Oil, Vanaspati Ghee Projects

India is a leading player in edible oils, being the world’s largest importer (ahead of the EU and China) and the world’s third-largest consumer (after China and the EU).A growing population, increasing rate of consumption and increasing per capita income are accelerating the demand for edible oil in India.

India is one of the largest producers of oilseeds in the world and this sector occupies an important position in the agricultural economy. Oilseeds and edible oils are two of the most sensitive essential commodities.  India grows oilseeds on an area of over 26 million hectares, with productivity of around 1000 kg a hectare. But self –reliance in edible oils is not in sight and the country imports almost half of its edible oil requirements.

India has a wide range of oilseeds crops grown in its different agro climatic zones. Groundnut, mustard/rapeseed, sesame, safflower, linseed, castor are the major traditionally cultivated oilseeds.  Soyabean and sunflower have also assumed importance in recent years. Coconut is most important amongst the plantation crops. Among the non-conventional oils, rice bran oil and cottonseed oil are the most important. The Indian edible oil industry is composed of some 15,000 oil mills, 600 solvent extraction units, 250 vanaspati units and about 400 refining units.

The National council of Applied Economic Research has projected the demand for edible oils under three scenarios on the basis of per capita income growing annually by 4%, 5% and 6%.Under the low growth scenario, the demand was to rise to 22.8 million tones, under medium growth scenario to 25.9 million tones and under high growth scenario to 29.4 million tones in the near future. The edible oil industry is largely dominated by the bulk segment. Unbranded segment accounts for anywhere between 80 and 90% of the total consumption. Imports are taking place in two forms-refined and crude oil. A large part of the crude oil gets sold as unbranded oil. The share of raw oil, refined oil and vanaspati in the total edible oil market is estimated at 35%, 55% and 10% respectively.

Coming to the non edible oil sector, there has been a great potential for production of bio-fuels like bio-ethanol and biodiesel. The country has been hit hard by the increased cost and uncertainty and so is exploring other energy sources occurring, bio-diesel, extracted from trees is one such alternative under consideration. Bio-diesel would be cheap to produce as it can be extracted from certain species of tree that are common in many parts of India. Due to the concern on the availability of recoverable fossil fuel reserves and the environmental problems caused by the use those fossil fuels, considerable attention has been given to biodiesel production as an alternative to petrodiesel. The focus is on biodiesel production which is produced from vegetable oils, animal fats or non-edible oils. Talking of non edible oils, the castor oil presently bears a great importance in this sector. Castor oil is one of the most useful plant oils. Castor Oil, in various grades, is used in pharmaceuticals, food and other industries. In addition, castor oil and its derivatives & castor-based oleochemicals are the source of a number of useful oleochemicals.

India’s edible oil imports increased to 6.12 lakh tonnes in the fiscal ended March 2010 while the non-edible oil imports fell to 20,575 tonnes, according to the Solvent Extractors Association.
The fall in the imports of non-edible oil was due to the higher imports due to the larger stocks at ports for lift and in pipelines. The country had imported 6.41 lakh tonnes of vegetable oils comprising edible and non-edible oil in March 2009. However, the overall import of vegetable oils rose 4.3% to 37.47 lakh tonnes during November 2009 to March 2010 compared with 35.92 lakh tonnes in the corresponding period of the previous year. Non-edible oil imports rose by 2.5% to 1.62 lakh tonnes during November 2009 to March 2010 compared with 1.58 lakh tonnes in the year-ago period, while edible oils imports increased to 35.85 lakh tonnes from 34.34 lakh tonnes.

Going by the market Statistics, the edible and non edible oil sector is all set for a boom in the market.The edible and non edible oil Industry needs to be strengthened by raising productivity, ensuring a reasonable price to the farmers and levying import duties at a reasonable level. Controls and regulations by government have left the oil industry in a highly competitive market dominated by both domestic and multinational players. It is the right time for an entrepreneur to venture into this sector which is highly profitable.

 

 

Reasons for buying our reports:

This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, market potential of the product and reasons for investing in the product

This report provides vital information on the product like its characteristics and segmentation

This report helps you market and place the product correctly by identifying the target customer group of the product 

This report helps you understand the viability of the project by disclosing details like machinery required, project costs and snapshot of other project financials

The report provides a glimpse of government regulations applicable on the industry

The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decisions.

 

Our Approach:

Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years.

The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players

We use reliable sources of information and databases. And information from such sources is processed by us and included in the report

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 2 of 11 | Total 104 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Extraction Of Sesame, Rice Bran & Palm Oil - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Sesame, rice bran and palm oils are used as vegetable oil in the domestic purposes for consumer use. These oils are extracted by using solvent extraction plant or by expeller process. Extracted oil may content wax and gum, it may be refined by physical and chemical treatment. Extraction oil is mostly environmentally friendly working , though there is very lesser chance of air pollution which can be easily controlled. Market demand of vegetable oil in our country is more than the supply by the manufacturers. There is good scope of marketing of vegetable oil in our country. As a whole vegetable oil processing is one of the best project in India, it will be successful venture in future. You can come in this project.
Plant capacity: 15.0 MT/DayPlant & machinery: Rs. 103.0 Lakhs
Working capital: Rs. 266 LakhsT.C.I: Rs. 450.0 Lakhs
Return: 65.24%Break even: 38.54%
Add to Inquiry Add to Inquiry Basket

Jatropha Plantation and Oil Extraction (Used As Bio Fuel) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Plant Layout

Jatropha curcus is a drought-resistant perennial, growing well in marginal/poor soil. It is easy to establish, grows relatively quickly and lives, producing seeds for 50 years. Jatropha the wonder plant produces seeds with an oil content of 37%. The oil can be combusted as fuel without being refined. It burns with clear smoke-free flame, tested successfully as fuel for simple diesel engine. The by-products are press cake a good organic fertilizer, oil contains also insecticide. It is found to be growing in many parts of the country, rugged in nature and can survive with minimum inputs and easy to propagate. Medically it is used for diseases like cancer, piles, snakebite, paralysis, dropsy etc. Jatropha grows wild in many areas of India and even thrives on infertile soil. A good crop can be obtained with little effort. Depending on soil quality and rainfall, oil can be extracted from the jatropha nuts after two to five years. The annual nut yield ranges from 0.5 to 12 tons. The kernels consist of oil to about 60 percent; this can be transformed into biodiesel fuel through esterification. Family: Euphorbiaceae Synonyms: Curcas purgans Medic. Vernacular/common names: English- physic nut, purging nut; Hindi - Ratanjyot Jangli erandi; Malayalam ? Katamanak; Tamil ? Kattamanakku; Telugu ? Pepalam; Kannada ? Kadaharalu; Gujarathi ? Jepal; Sanskrit ? Kanana randa. Distribution and habitat It is still uncertain where the centre of origin is, but it is believed to be Mexico and Central America. It has been introduced to Africa and Asia and is now cultivated world-wide. This highly drought-resistant species is adapted to arid and semi-arid conditions. The current distribution shows that introduction has been most successful in the drier regions of the tropics with annual rainfall of 300-1000 mm. It occurs mainly at lower altitudes (0-500 m) in areas with average annual temperatures well above 20�C but can grow at higher altitudes and tolerates slight frost. It grows on well-drained soils with good aeration and is well adapted to marginal soils with low nutrient content. Botanical Features It is a small tree or shrub with smooth gray bark, which exudes a whitish colored, watery, latex when cut. Normally, it grows between three and five meters in height, but can attain a height of up to eight or ten meters under favourable conditions. Leaves It has large green to pale-green leaves, alternate to sub-opposite, three-to five-lobed with a spiral phyllotaxis. Flowers The petiole length ranges between 6-23 mm. The inflorescence is formed in the leaf axil. Flowers are formed terminally, individually, with female flowers usually slightly larger and occurs in the hot seasons. In conditions where continuous growth occurs, an unbalance of pistillate or staminate flower production results in a higher number of female flowers. Fruits Fruits are produced in winter when the shrub is leafless, or it may produce several crops during the year if soil moisture is good and temperatures are sufficiently high. Each inflorescence yields a bunch of approximately 10 or more ovoid fruits. A three, bi-valved cocci is formed after the seeds mature and the fleshy exocarp dries. Seeds The seeds become mature when the capsule changes from green to yellow, after two to four months Flowering and fruiting habit The trees are deciduous, shedding the leaves in the dry season. Flowering occurs during the wet season and two flowering peaks are often seen. In permanently hu-mid regions, flowering occurs throughout the year. The seeds mature about three months after flowering. Early growth is fast and with good rainfall conditions nursery plants may bear fruits after the first rainy season, direct sown plants after the second rainy season. The flowers are pollinated by insects especially honey bees. Ecological Requirements Jatropha curcas grows almost anywhere , even on gravelly, sandy and saline soils. It can thrive on the poorest stony soil. It can grow even in the crevices of rocks. The leaves shed during the winter months form mulch around the base of the plant. The organic matter from shed leaves enhance earth-worm activity in the soil around the root-zone of the plants, which improves the fertility of the soil. Regarding climate, Jatropha curcas is found in the tropics and subtropics and likes heat, although it does well even in lower temperatures and can withstand a light frost. Its water requirement is extremely low and it can stand long periods of drought by shedding most of its leaves to reduce transpiration loss. Jatropha is also suitable for preventing soil erosion and shifting of sand dunes. Biophysical limits Altitude: 0-500 m, Mean annual temperature: 20-28 deg. C, Mean annual rainfall: 300-1000 mm or more. Soil type: Grows on well-drained soils with good aeration and is well adapted to marginal soils with low nutrient content. On heavy soils, root formation is reduced. Jatropha is a highly adaptable species, but its strength as a crop comes from its ability to grow on very poor and dry sites. A large genus of herbs, shrubs and trees distributed in the tropical and sub-tropical parts of the world, chiefly in Africa and America. About 9 species have been recorded in India; some of them are grown in gardens for their ornamental foliage and flowers. These plants has various uses, one use is as medicinal plant and another use is for extraction of different alkaloids. There is another most important part of the plants i.e. seeds oil. The seed oil can be used as biofuel. The plants are cultivated largely in the South America, France, and Africa. It is cultivated in the rainy season and fruits or seed yielded in the winter season. Leaves and plants are used for the extraction of different alkoloids, which is largely used for the preparation of different medicinal value products. The Jatropha seed available has 94% oil content. Jatropha oil has different use of which it can be used as biofuel. After extraction of oil seed waste can be used for making organic waste. In India it can be largely produced in the Assam, Orissa and Goa hills. As a whole Jatropha cultivation in India may open the new way of medicinal plant cultivation and the new way of starting the sources of bio fuel. Anybody may enter into this field will be successful.
Plant capacity: 24000.00 Kgs/AnnumPlant & machinery: Rs 30 Lakhs
Working capital: Rs 8 LakhsT.C.I: Rs 92 Lakhs
Return: 16.00%Break even: 66.00%
Add to Inquiry Add to Inquiry Basket

Geraniol Derivative and Alcohol Extract Of a Pinene - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Acrylic terpene (C10) and sesquiterpene (C15) hydrocarbons find little use in composition. They are relatively unstable, some have a slightly aggressive odor due to their strongly unsaturated structure Mycene, ocimene and farnesonen, which are present in many fruits and essential oils, find-limited use in perfumery. The consumer is getting used to the imported fragrances. As the process matures, the market will need to be diversified & indianized. Companies are importing alcohols & oils to overcome the need for the right mix and process technology which does not exist in India. The consumer preferences and products variety are so wide that technology import is unavoidable at this stage. The market is small but growing. It is catching up with the nouveau rich life style. A long term high growth trend can be seen provided the consumer finds the products with in the reach of his pocket.
Plant capacity: 900 kgs/DayPlant & machinery: Rs. 29 Lakhs
Working capital: -T.C.I: Rs 188 Lakhs
Return: 46.00%Break even: 76.00%
Add to Inquiry Add to Inquiry Basket

Dairy farming and dairy products (Pasteurised Milk, Butter, Ghee, Paneer and Butter Milk)- Cattle Breeding Farm, Fodder, Livestock Farming, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Feasibility Study

Every body use milk and milk products. A dairy is a place for handling milk and milk products. Technology refers to the application of scientific knowledge for purposes. Dairy technology has been defined as that branch of dairy science which deals with the processing of milk and the manufacture of milk products on an industrial scale. Milk is used as a food. Used as a complete food of infant. It is used in all homes. It is used in hotels and restaurants as milk food preparation and in the preparation of tea. If we compare India position w.r.t. other milk producing countries, of the world, we find that India has 53.0 million animals in milk, within buffalo milk/annum per buffalo-450kg (average) and total milk production = 2, 13, 60,000 MT/Year. So there is very good scope for new entrepreneurs.
Plant capacity: Farming 200 Cows, 5000 Ltrs/Day, Processed Milk 34000 Lts/DayPlant & machinery: 594 Lacs
Working capital: 440 LacsT.C.I: 1866 Lacs
Return: 58.00%Break even: 34.00%
Add to Inquiry Add to Inquiry Basket

Black Pepper Oil - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

The trade distinguishes between two principal types of pepper, viz., the black and the white both derived from the same plant piper nigrum L. (fam. Piperaceae), a climbing or trailing vine – like shrub native to southern India. Black pepper is the dried whole unripe fruit of this plant. Pepper is one of the most important and oldest spices. Oil of pepper is valuable adjunct in the flavouring of sausages canned meats, soups, table sauces and certain beverages and liquors. The oil is used also in perfumery, particularly in bouquets of the oriental type, to which in imparts spicy notes difficult to identify. There are few in organized and few in unorganized sectors engaged in the manufacturing of spice oils with black pepper oil. Most of the production of India is exported to European countries and Japan. About 30% - 50% of the products used by the hotel industries and food industries. This is also used in the cosmetic industries. It can also be estimated that the rate of production growth may touch about 10% per annum. On that base it can be predicted that there is bright scope for few new entrepreneurs. You can well venture in this project. There is a very good scope for new industry in this field
Plant capacity: 45000 Kg/AnnumPlant & machinery: 55 Lacs
Working capital: -T.C.I: 148 Lacs
Return: 45.00%Break even: 69.00%
Add to Inquiry Add to Inquiry Basket

Corn Oil (Maize Oil)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Maize oil is produced as the big product from the maize. In wet milling industries starch and its product, corn syrup, dextrose, dextrin etc. Are the principal products, gluten feeds and corn oil are the main by-products. Corn products which mainly consist the endosper without separation of starch from gluten such a cornmeal, homing. In the dry milling corn oil may not be produced as by product depending upon the size of the plant. Corn oil contains linoleic acid and oleic acid as the main fatty acids. It is used for salad purposes and margaring. Some of the better refined qualities reach a high degree of excellence as regard taste small & keeping properties and therefore find use for cake and biscuit making as well as for greasing of backing pans etc. There is specific demand and supply gap available. Hence any new entrepreneur enter in this field will be successful.
Plant capacity: 5 Mt/DayPlant & machinery: 56 Lakhs
Working capital: -T.C.I: 257 Lakhs
Return: 41.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

Turkey Red Oil - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

Turkey red oil which are also known as sulphonated castor oil in the trade is the oldest textile finishing agent. This oil should contain the minimum of free sulphur trioxide. Turkey red oil is essentially an intimate mixture of pigments, oil varnishes, driers and frequently waxy or greasy compounds. The ink must posses suitable physical characteristics such as viscosity, length and stock on which it is to be used. Turkey red oil is very important intermediate organic compounds are largely used by the textiles, paper, leather, soaps and other industries, mainly for dyeing and sizing purpose. These industries are fastly developing industries and therefore all the auxiliary chemicals which are used in these industries possess a great demand in near future.
Plant capacity: 1000 Kgs/DayPlant & machinery: 10 Lakhs
Working capital: -T.C.I: 46 Lakhs
Return: 57.00%Break even: 34.00%
Add to Inquiry Add to Inquiry Basket

Wetting Oil (Textile Yarn Wetting Agent) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Wetting oils are wetting agents having oily consistency. Wetting agents are surface active agents which when added to water causes it to penetrate more easily into, or to spread over the surface, another material by reducing surface tension of the water. Wetting oils because of their growing uses in various industries are having ever increasing demand. The prospect of the industry is very well linked with soaps, detergents, allied products, paints, varnishes any lacquers, leather, paper cosmetics, textiles and various other industries which are fast developing. These industries have very bright future. A new entrepreneur can confidently venture into this field and he will find it highly profitable.
Plant capacity: 1000 Liters/DayPlant & machinery: 11 Lakhs
Working capital: -T.C.I: 61 Lakhs
Return: 45.00%Break even: 43.00%
Add to Inquiry Add to Inquiry Basket

Pesticides From Neem Seeds & Leaves - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

This is a medium sized free, with a clear bole of 10-25 and a girth of 6-8. Although described as evergreen in drier areas it becomes deciduous. Its bark is moderately thick with longitudinal or oblique furrows on the outer surface. It is dark grey outside and reddish inside. Almost every part of the free is bitter and has found application in indigenous medicine. The seed oil is used in skin diseases such as scrofula, indolent ulcers and sores and ringworm, septic sores. The bark also is considered useful in skin diseases the leaves are bitter and have a faint, but characteristic unpleasant small. Dried in shade, they are commonly pleaded in books paper and clothes to prefect then from moths etc. The new entrepreneur can enter into manufacturing of neem pesticides, became demand of bio-pesticide is increasing day by day.
Plant capacity: 1 Mt/DayPlant & machinery: -
Working capital: -T.C.I: -
Return: 43.00%Break even: 47.00%
Add to Inquiry Add to Inquiry Basket

Castor Oil & Its Derivatives - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Castor oil obtained by a combination of pressing and extraction from the seeds of castor plants (Ricinus Communis) consist of up to 90% of Triglyceride of Ricinoleic acid, 12 Hydroxy Oleic Acid. The castor oil derivative oleoresin finds an extensive use in medicines viz. carminative and digestive purposes etc. The demand of oleoresins is increasing with the expansion of the end user industries and the product a bright scope as well as good future prospects. Thus a new entrepreneur can confidently venture into the production of oleoresin and he will find it a very lucrative trade.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 0.01%Break even: 0.01%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 2 of 11 | Total 104 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top