Google Search

Search

Already a Member ?

Best Business Opportunities in Tripura- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Tripura is a state in Northeast India. The third-smallest state in the country, it covers 10,491 km2 (4,051 sq mi) and is bordered by Bangladesh (East Bengal) to the north, south, and west, and the Indian states of Assam and Mizoram to the east. Tripura is a landlocked state in North East India. The state has a tropical savanna climate, designated Aw under the Köppen climate classification. The undulating topography leads to local variations, particularly in the hill ranges. The four main seasons are winter, from December to February; pre-monsoon or summer, from March to April; monsoon, from May to September; and post-monsoon, from October to November.

Tripura's gross state domestic product for 2010–11 was 129.47 billion (US$2.1 billion) at constant price (2004–05), recording 5.71 per cent growth over the previous year. In the same period, the GDP of India was 48778.42 billion (US$790 billion), with a growth rate of 8.55 per cent. Tripura is an agrarian state with more than half of the population dependent on agriculture and allied activities. However, due to hilly terrain and forest cover, only 27 per cent of the land is available for cultivation. Rice, the major crop of the state, is cultivated in 91 per cent of the cropped area.

TOURISM

Tripura has a geographical area of about 10,492 sq. km. almost two-thirds of the state is under hilly terrain and it is surrounded on three sides by the deltaic basin of Bangladesh. The Tripura tribal’s are divided into two groups: Puran Tripuras and Natun Tripuras. The Puran Tripuras are the original inhabitants of the State and constitute a little over 16% of the total and 57% of the tribal population of the State. The Department of Tourism, Govt. of India, under the ministry of Tourism and Culture has been providing liberal financial and technical support for the tourism development in the state based on the projects received from the states. It is quite clear that Tripura has tremendous and quite unique tourism potential. This could be tapped mainly through the concept of Eco-tourism and Heritage tourism. Nature / wildlife tourism, adventure tourism, rural tourism, leisure tourism, pilgrimage tourism, international border tourism could be some special tourist packages. The Tourism Development in the Northeast region will depend on integrated approach, involving various government departments, private entrepreneurs, voluntary organizations and local community. This approach will also help in evolving local people’s perception towards tourism development as a strong tool for socio-economic up liftment.

INDUSTRIAL SECTOR

The State Government offers a package of incentives for setting up of industrial units, which is comparable to other states. Besides, the special incentive package i.e. North East Industrial and Investment Promotion Policy (NEIIP) declared by the Government of India for the North East Region is available to industrial units.

State Package of Incentives under Tripura Industrial Investment Promotion Incentive Scheme-

•                    Capital Investment Subsidy @ 30% and additional subsidy @ 2.5% for enterprises of ST, SC, & women individuals on Fixed Capital Investment.

•                    Full Reimbursement of Standard Certification Fees /Charges / other expenses on account of obtaining a standard Certification.

•                    Provides State Transport Subsidy for covering the portion for which Central Transport Subsidy is not available

•                    85% Exemption from the payment of Earnest Money and Security Deposits on tenders floated by State Govt. Department / Agencies.

Incentives declared by Central Government:

•                    Exemption of Excise Duty on finished products.

•                    Central Transport Subsidy.

•                    Income Tax Benefit.

•                    Capital Investment Subsidy.

•                    Comprehensive Insurance Scheme for insurance coverage. Subsidies to service sector, bio-technology and power generating industries.

INVESTMENT OPPORTUNITIES

Tripura offers an investor-friendly environment. The Government welcomes investments into the State, from both domestic and foreign investors.

•        Natural gas

Tripura has vast reserves of natural gas in non-associate form. The gas is of high quality, with high methane content of up to 97%. The availability of superior quality natural gas, at concessional price, offers a great opportunity to prospective investors, to set up gas-based industrial units, using natural gas

•        Information Technology (IT)

Tripura has been considered the second best IT destination in the North East. IT sector (including IT-enabled services) has been identified as one of the major potential growth sectors by the state. The high literacy rate of the State provides additional advantage for development of the sector.

•        Food Processing

The State government has identified food processing as a major thrust area. There is a vast potential for setting up of food processing units in the State. The agro-climatic conditions in Tripura are ideally suited for production of a large variety of horticultural crops.

•        Handicrafts

From time immemorial, Tripura has carved out a name for itself in the field of handicrafts. The gifted artisans produce wonderful objects of crafts from simple material like cane, bamboo and wood.

•        Tourism

Tripura is an attractive tourist destination. The state has a rich cultural heritage. There are number of historical Hindu and Buddhist sites.


INDUSTRIAL POLICY

•        To improve Basic as well Industrial Infrastructure.

•        Industrial Growth by attracting Private Investment.

•        To improve investment climate towards better regulation by removing barriers to competition.

•        Creation of hassle-free and congenial investment climate.

•        To bring significant increase in the State Domestic Product.

•        Widening of resources base of the state.

•        Development of connectivity (Internal road, railways and air & telecom).

•        Better social infrastructure Enabling Entrepreneurship -building capacities through entrepreneurial and technical skills, training and promotion of self-employment.

THRUST AREAS

•        Natural Gas

•        Food Processing

•        Rubber

•        Tea

•        Handicraft

•        Bamboo

•        Handloom

•        Tourism

•        Information Technology

•        Education

  •           Healthcare

The Department of Industries & Commerce was established to promote Village and Small-scale industries as well as medium and large scale industries in the State. While efforts are being made to promote entrepreneurship within the State, the outside investors in the public and private sectors are also encouraged both for their financial capabilities and technical expertise, for the medium and large-scale units. The major existing industrial area is the Industrial Growth Centre Complex at Bodhjungnagar which also includes Food Park, Rubber Park and Export Promotion Industrial Park. The other industrial sites near Agartala as the main business and industrial centres are Dukli, Arundhatinagar and Badharghat. The mineral resources are minor amounts of glass sands, limestone, plastic clay and hard rock and all of these materials are being used in varying degrees. Setting up of ceramic tiles unit and other mineral based industries are being encouraged in the private sector.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 162 of 254 | Total 2538 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 162 253 254   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Manufacturing of Surgical and Examination Latex Rubber Gloves

Manufacturing of Surgical and Examination Latex Rubber Gloves. Most Profitable Business Ideas with Huge Demand. Examination gloves are worn by a health care provider throughout patient examination and protect the healthcare provider from contracting various blood borne and transmissible diseases. Examination gloves are an important component of personal protection equipment of a care provider. many diseases is transmitted via open wounds, fresh cuts, blood, secretions, body fluids and touching non-intact skin. Such hazard is omnipresent in the medical business therefore investment in good examination gloves is imperative to ensure health of the health care provider. Gloves are important for health care workers and associated staff for protection from contamination hazards, biochemical hazards and transmissible diseases. Whereas selecting an examination glove it’s important to think about the type of practice and examinations to be performed, the glove material most suitable for the examination procedure and the right fit. There are two main types of medical gloves: examination and surgical. Surgical gloves have a lot of precise sizing with a better precision and sensitivity and are made to a higher normal. Examination gloves are on the market as either sterile or non-sterile, while surgical gloves are usually sterile Typical sizing ranges from 5.5 to 9.0 at an increment of 0.5. Some brands may also offer size 5.0 which is particularly relevant to women practitioners. First-time users of surgical gloves may take some time to find the right size and brand that suit their hand geometry the most. People with a thicker palm may need a size larger than the measurement and vice versa. Advantages and Uses Comfort and dexterity Easy to put on, greater flexibility Polymer coating replaces corn starch powders Best fit, comfort, and flexibility Effective barrier against biological contaminants Sets the standard for great fit and comfort Flexible- available for use in exam and sterile surgical applications High level of sensitivity Durable / high strength Mid-level barrier protection Not suitable for those with latex allergies Can cause the development of latex allergy when used often Start a Surgical/Medical Glove Manufacturing Business Latex Surgical Gloves are extremely flexible and comfortable to wear. Over the years, the demand for our Latex Surgical Gloves has increased systematically within the national market. Latex surgical gloves are made from natural rubber latex which provide excellent tactile sensitivity and comfort. Latex material is known to have very high elasticity which means the gloves will stretch well to permit simple donning. Although surgical gloves are currently on the market in new material like polyisoprene, latex continue to be the material of choice for surgical gloves by surgeons. Today, there are several latex glove options on the market because of improved technology. For instance, surgical gloves with polymer inner coating are available to provide ease of donning gloves even if hands are damp or dry. Other improvements include beneath glove indicators that are used whereas double-gloving to warn surgeons of glove punctures that will occur. The rising customary of living together with the increasing importance of controlling cross contamination and infections in hospitals and clinics have led to increased demand for latex surgical gloves in markets similar to China and India. Technology and Production Process The equipments are: pot mills with jars, a paddle mixer, dipping vats, coagulating tanks, a hot air oven, a micrometer, a hardness tester, a weighing balance and moulds. The raw materials are: natural rubber latex, anti-oxides, sulphur, accelerators, and zinc oxide and packaging materials. In manufacturing surgical gloves, the ammonia content of the latex is first reduced to about 0.1% by blowing air and by treating with formaldehyde. Then dispersion of various additives is made and added in the latex compound. Later, a coagulant solution is prepared with the mould of aluminum, wood, glass or porcelain, dipped in the coagulant solution and then into the latex compound. After withdrawal, the mould is rotated to assure even distribution of latex film deposits. The next operations are leaching, drying and preliminary finishing operations such as beading. Finally, the gloves are cured in hot air or stream, packed and marketed. Special Features Latex-free, odour-free and powder-free Can Withstand IPA washing (ISO Propyl Alcohol). Can be used in food industry Ideal for doctors with latex allergy Related Projects: - Surgical, Medical Plastics, Medical Disposables, Disposable Medical Products used in Hospitals Market Outlook Latex gloves are being used in medical industry, automobile industry and manufacturing industry including food processing. The major purpose of using these rubber gloves are to protect the hand and fingers from heat, abrasion, electric shocks, chemical attack, contamination through direct contact as in the case of medical examination gloves etc. Rubber gloves manufacturing process is not complex and the main raw material is rubber latex. Related Books: - Rubber Processing And Compounding Technology Books, Rubber Processing Chemicals and Leather Processing Technology Books Indian surgical glove market is growing at 15% while the demand for examination gloves has been rising by 20%per annum. St Mary’s is the largest supplier of centrifugal latex under the brand Centex, a crucial raw material for manufacturing rubber dipped goods like gloves, balloons, condoms and rubber bands Indian surgical glove market is growing at 15 per cent while the demand for examination gloves. The global medical gloves market is growing at a healthy rate. The growth can be attributed to the growing demand for safety and hygiene standards to prevent the risk of contamination and infections in healthcare settings during medical and treatment measures. The growth in surgical procedures for several diseases and potential risk reduction for surgical site infection (SSI) is likely to fuel the market growth. Related Project: - Rubber and Rubber Products, Rubber based Industries Health care professionals will continue to demand the latest medical gloves to treat acute and chronic diseases, which will promote safe and effective treatment outcomes. The emergence of new pandemic challenges such as COVID-19 will drive the future growth of the market. A strong preference for non-powdered medical gloves is also likely to drive future market growth. The global medical gloves market is estimated to grow at a CAGR of 7.24% from a market size of USD7, 435.65 million in 2019 to a market size of USD13, 053.249 million by 2025. Medical Gloves are utilized as a routine measure in a healthcare environment for infection prevention and prevention against disease transmission at the time of testing, examination, or performing a medical procedure. The growing need for gloves for prevention against germ transmission is the major factor driving the market growth in the forecast period. The prevalence of infectious diseases is further driving the market growth. Related Books: - Disposable Products (Medical, Surgical, Thermocol, Plastic, Paper, Domestic and General Products) COVID-19 The outbreak of Novel coronavirus disease (now named COVID-19) was initially noticed from a seafood market in Wuhan city in Hubei Province of China in mid-December, 2019, has spread to over 185 countries/territories worldwide as well as india. The causative agent for COVID-19, earlier termed provisionally as novel Coronavirus has been officially named as SARS-CoV-2. Mode of Transmission There is clear evidence of human-to-human transmission of SARS-CoV-2. It’s thought to be transmitted mainly through respiratory droplets that get generated once people cough, sneeze, or exhale. SARS-CoV-2 also gets transmitted by touching, by direct touch and through contaminated surfaces or objects and so touching their own mouth, nose, or possibly their eyes. Health care associated infection by SARS-CoV-2 virus has been documented among healthcare workers in many countries. Related Videos: - Surgical Hand Gloves Manufacturing, Medical Gloves Production, Sterile Surgical Gloves Production of Powder Free Disposable Nitrile Gloves? Manufacturing of Disposable Latex & Nitrile Gloves How to Manufacture Disposable Plastic Gloves Key players Accent Industries Ltd. Acknit Industries Ltd. Asian Latex Ltd. Casil Health Products Ltd. Casil Health Products Ltd. J K Ansell Pvt. Ltd. London Rubber India Ltd. Mega Meditex Ltd. Sri Kannapiran Mills Ltd. Tags:- #surgicalgloves #ExaminationGloves #RubberGloves #MedicalGloves #DisposableMedicalGloves #latexgloves #gloves #latexfree #latexrubbergloves #CoronavirusBusiness #COVID2019 #caronavirrus #CaronaBUSINESS #lockdownbusiness #COVID #businessinlockdown #startupbusiness #startupbusinessideas #businessestostart #startupideas #startupbusinesswithnomoney #businessstartupindia #coronavirusbusiness #Entrepreneurs #covid19business #DetailedProjectReport #businessconsultant #BusinessPlan #marketresearchreport #feasibilityReport #NPCS #industrialproject #entrepreneurindia
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Production of Acetaldoxime or Acetaldehyde Oxime

Production of Acetaldoxime or Acetaldehyde Oxime. Exploring Business Opportunity in Chemical Industry. Acetaldehyde Oxime is prepared by oximating acetaldehyde with an aqueous hydroxylamine-containing solution to form an aqueous oximation reaction mixture which includes a salt and recovering acetaldehyde Oxime from the aqueous oximation reaction mixture by distilling a mixture of acetaldehyde Oxime and water directly from the aqueous oximation reaction mixture. The existence of an azeotrope between water and acetaldehyde Oxime enables all the acetaldehyde Oxime to distill out of the aqueous oximation reaction mixture without large amounts of excess water being distilled, which could undesirably concentrate acetaldehyde Oxime in the bottoms of the distillation, leading to product decomposition or side reaction. The recovered mixture containing acetaldehyde Oxime and water and lites including acetaldehyde and ammonia is then purified by a second or lights distillation to remove the lights including acetaldehyde and water and produce a product mixture of acetaldehyde Oxime and water relatively free of lights. This product mixture may then be diluted and reacted with Cl2. Oxime are chemical compounds having the general formula >C=NOH. They belong to the imine family. Oxime are generated by the condensation of an aldehyde or a ketone with hydroxylamine. During condensation aldehydes produce aldoxime similarly ketones produce ketoxime. Oxime exist as colorless crystals and are poorly soluble in water. Oxime can be hydrolyzed in the presence of various inorganic acids, and they decompose into the corresponding ketones or aldehydes, and hydroxylamines. The reduction of Oxime compounds produces the corresponding amine compounds. Uses and Applications Acetaldoxime is used as an oxygen scavenger in boiler water. It is also used as an intermediate in chemical synthesis and pharmaceuticals. It is involved in the rearrangement reaction to prepare acetamide by using nickel acetate as a catalyst. It acts as a precursor to prepare heterocyclic compound such as spiroisoxazoline. Further, it is used to prepare alkylated (Z)-Oxime by deprotonating followed by reaction with benzyl bromide. Acetaldehyde Oxime (AAO) is an essential raw material used in the production of pesticides that are used to protect crops from insect and fungus infestation. AAO is also used in small quantities in the production of certain types of coatings. Pesticide intermediate, synthesis of pesticides Methomyl, Thiodicarb, etc.; organic synthesis intermediate. When melted, excellent solvent for many inorganic and organic compounds, organic synthesis, stabilizer, plasticizer, alcohol denaturant. Creation of acrylamide through the aldehyde Oxime one-pot method. With the presence of catalyst InCl3, acetaldehyde Oxime replaces water and reacts with nitrile water to create acrylamide at a high yield Application Insights The global acetaldehyde market by application has been segmented into chemicals, plastics & synthetic rubber, food & beverages, paints & coatings, pharmaceutical & cosmetics, paper & pulp, and others. The acetaldehyde market for the paints & coatings application is projected to grow at the fastest pace over the forecast period. Acetaldehyde is used as a binder in paints and coating substances for the modification of gloss and rheology. It is used as a raw material for the manufacturing of pentaerythritol, which is used in the synthesis of Alkyd resins, fatty acid resin, and tall oil esters; it is also used as intumescents in flame retardant paints. It is used in wooden varnished, laminate, linoleum, and cork/pine flooring. The chemical also finds applications in plastic water-based and matt emulsion paints used for wood ceilings, and wooden, particle-board, plywood, pinewood, and chipboard furniture. Therefore, the elevating use of acetaldehyde in the paints and coating application is projected to boost the demand Rising demand in array of applications is expected to boost the demand for acetaldehyde Acetaldehyde is used in a wide range of industrial applications; it is the most commonly used raw material in the organic chemical industry. As a raw material, it is used in the manufacturing of paint binders, plasticizers, and super absorbents that are used in baby nappies. It is also used in the manufacture of various types of building materials, synthetic lubricants, fire protection paints, and explosives. In the pharmaceutical industry, it is used in the production of vitamins, sleeping aids, and sedatives. It is also often used as an intermediate in the chemical synthesis of acetic acid. Moreover, acetaldehyde chemical is infused in various types of perfumes and can further be used in decorative cosmetics, fragrances, shampoos, soaps, and oral care products as well as in household cleaners and detergents. Market Outlook The global acetaldehyde market is accounted to US$ 1,329.4 MN in 2018 and is expected to grow at a CAGR of 6.7% during the forecast period 2019 – 2027, to account to US$ 2,367.0 MN by 2027. The global acetaldehyde market has been segmented into pyridine and pyridine bases, pentaerythritol, acetic acid, and others. Under the derivative segment, the pyridine and pyridine bases segment led the global acetaldehyde market. The pyridines and pentaerythritol derivatives are gaining popularity over the past few years. Pyridine is widely used in the production of food additives and agrochemicals such as herbicides, pesticides, and insecticides. Pyridine is used as a raw material in ethylene diacetate, which is further used in vinyl acetate production. It is also used as a plasticizer in the plastic industry and as a paint binder in the paint industry. This growth can be attributed to the increasing demand for acetaldehyde in the water treatment application. In addition, the demand for high-quality derivatives in emerging economies is another significant factor contributing to the growth of the acetaldehyde market. Based on application, acetaldehyde finds use in a wide range of applications, such as chemicals, plastics & synthetic rubber, food & beverage, paints & coatings, pharmaceuticals & cosmetics, paper & pulp, water treatment, and others. The food & beverage segment is the largest application segment of the acetaldehyde market. The food & beverage application leads the overall acetaldehyde market, due to its use as a flavoring agent in several food products. In the food & beverage industry, acetaldehyde is used in the production of preservatives and flavorings. Furthermore, it occurs naturally in fruits and fruit juices, ripe fruits, cheese, and heated milk. Acetaldehyde arises naturally during fermentation and is found in low levels in foodstuffs such as milk products, soy products, pickled vegetables, and nonalcoholic beverages. Acetaldehyde acts as an additive in fruit and fish preservatives and flavoring agents, as well as a cross-linker in gelatin hardening. Furthermore, it is also used in producing vinegar and fruit and fish preservative. Acetaldehyde is mainly used to produce other chemicals, such as disinfectants, drugs, perfumes, explosives, lacquer and varnishes, photographic chemicals, phenolic, and urea resins, rubber accelerators and antioxidants, and room air deodorizers. Key Players:- A C I (Agro Chemical Inds.) Ltd. A V T Agrochem Ltd. Agro Chem Punjab Ltd. Ajay Bio-Tech (India) Ltd. Essem Catalyst Ltd. Evonik Catalysts India Pvt. Ltd. Gharda Chemicals Ltd. Celanese (US) Eastman (US) Merck KGaA (Germany) Sumitomo (Japan) Sekab (Sweden) Showa Denko (Japan) Jubilant Life Sciences (India) Lonza (Switzerland) LCY Chemical (Taiwan) Ashok Alco-chem (India) Tags:- #Acetaldoxime #acetaldehyde #chemicals #Oxime #DetailedProjectReport #businessconsultant #BusinessPlan #marketresearchreport #feasibilityReport #NPCS #industrialproject #entrepreneurindia #startupbusiness #startupbusinessideas #businessestostart #startupideas #startupbusinesswithnomoney #businessstartupindia #chemicalmanufacturing #chemicalindustry #chemicalconsultant #ManufacturingConsultant #chemicalbusiness #ChemicalGrowth #Chemicaltrends #BUSINESSOPPORTUNITIES #SmallScaleChemicalBusiness #BusinessOpportunity
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Manufacturing of Gold and Diamond Jewellery

Manufacturing of Gold and Diamond Jewellery. Opportunities for Entrepreneurs to Start Own Business of Gold and Diamond Jewellery. Jewellery or Jewellery consists of decorative things worn for personal adornment, similar to brooches, rings, necklaces, earrings, pendants, bracelets, and cufflinks. Jewellery could also be attached to the body or the clothes. From a western perspective, the term is restricted to durable ornaments, excluding flowers as an example. For many centuries metal, usually combined with gemstones, has been the normal material for Jewellery, however different materials similar to shells and other plant materials could also be used. Yellow gold is what most of the people envision after they think of gold Jewellery. Due to its colour, many of us assume that yellow gold is of a higher purity than white gold or rose gold. However, 18 carat yellow gold contains a similar amount of pure gold as 18 carat white or rose gold. The distinction in its colour comes from the very fact that this gold alloy contains silver, copper and zinc, which allows it to retain its golden colour. Yellow gold continues to be very popular round the world because it's the most hypo-allergenic and it requires {the least the smallest quantity} amount of maintenance of the three colors. For the Indian culture, jewelries plays a symbolic role. They carry ethnic and spiritual meanings, especially during weddings. The pieces of jewelries worn by the bride signifies that she is to become a part of her husband’s family unit. They’re a part of the purification ritual as she becomes a part of the extended family of her bridegroom. Indians give importance to the nuances of bridal jewelries. The heavier the nuances of those jewelries are the larger role they play within the legacy of the family and also the Jewellery itself. So before giving the jewelries to the bride, the family usually makes sure that they're significant with a lot of distinct designs. Methods of Manufacturing Jewellery There are four manufacturing methods, almost all the Jewellery is made with the combination of various methods:- 1. HAND FABRICATION In a hand-fabricated item, every element is formed, assembled, joined and finished manually or using hand tools. The quality of a hand-fabricated piece depends on the skills of the craftsman. It is useful for projects that involve combining multiple gems from old mounting. 2. LOST-WAX CASTING Also known as Investment Casing, this method is used for mass production as well as to make one-of-a-kind pieces. This type of manufacturing involves use of wax moulds to make silica shells in which metal is poured and allowed to harden. It is named so, since wax used for casting a mould is lost in the process. 3. DIE STRIKING The process starts with the manufacture of a steel pattern called a die, specially fashioned to create a particular Jewellery item or component. A die-striking machine cuts out blanks of the size and shape needed for the Jewellery to be made. The metal blanks, gold, silver etc. are struck between two dies, which forces the metal to enter each crevice in the die. It is often used to achieve styles that are strong and lightweight. It allows die-struck Jewellery to be thin and lightweight without sacrificing durability. Die struck items need less finishing than cast and hand-fabricated stuff. 4. ELECTROFORMING In this, wax copies are created and then coated with a thin, electrically charged layer of metal. The copies are then submerged in an electrically charged liquid that contains precious metal particles. These particles stick to the wax copies in layers. The wax melts out through a small hole in the rigid precious metal shell. This creates hollow Jewellery that’s surprisingly big, bold, lightweight, durable and comfortable. Gold Rules in India The preference on Indian customers for usual low-margin gold Jewellery products is based on long entrenched cultural drivers. That is no longer about in conformity with change. Gold forms a bond of affection from generation after generation. It has been central to the celebration over marriage in India because a very long time. Gold between India is also universally valued a store about wealth. That is the ignoble major driver of demand. Gold Jewellery products provide a tangible way to preserve wealth while at the identical time serving the cultural function of providing decoration and displaying wealth. Indian consumers will usually flavour gold above other Jewellery materials because of its dual role. Nevertheless, growing purchasing power gives them the opportunity according to buy complementary Jewellery such as much platinum Jewellery or diamond Jewellery. Overall, community in India is modernizing and becoming less traditional. Consumers have shown a willingness to amplify usual demand because gold Jewellery including purchases of Jewellery made from other precious materials kind of diamonds then platinum. At steady gold prices, demand because such products will grow faster than make a bid because of gold Jewellery products actually due to the fact such is still into the nascent stage Government Initiatives The Government of India made hallmarking mandatory for Gold Jewellery and Artefacts. A period of one year is provided for implementation i.e. till January 2021. As per Union Budget 2019-20, the GST rate has been reduced from 18 per cent to 5 per cent (*5 per cent without Input Tax Credit (ITC)) for services by way of job work in relation to gems and Jewellery, leather goods, textiles etc. The Bureau of Indian Standards (BIS) has revised the standard on gold hallmarking in India from January 2018. The gold Jewellery hallmark will now carry a BIS mark, purity in carat and fitness as well as the unit’s identification and the jeweler’s identification mark. The move is aimed at ensuring a quality check on gold Jewellery. The Gems and Jewellery Export Promotion Council (GJEPC) signed a Memorandum of Understanding (MoU) with Maharashtra Industrial Development Corporation (MIDC) to build India’s largest Jewellery Park in at Ghansoli in Navi-Mumbai on a 25 acres land with about more than 5000 Jewellery units of various sizes ranging from 500-10,000 square feet. The overall investment of Rs 13,500 crore (US$ 2.09 billion). Gold Monetization Scheme enables individuals, trusts and mutual funds to deposit gold with banks and earn interest on the same in return. Investments/Developments The Gems and Jewellery sector is witnessing changes in consumer preferences due to adoption of western lifestyle. Consumers are demanding new designs and varieties in Jewellery, and branded jewelers are able to fulfil their changing demands better than the local unorganized players. Moreover, increase in per capita income has led to an increase in sales of Jewellery, as Jewellery is a status symbol in India. The cumulative Foreign Direct Investment (FDI) inflows in diamond and gold ornaments in the period April 2000 – December 2019 were US$ 1.17 billion, according to Department for Promotion of Industry and Internal Trade (DPIIT). Some of the key investments in this industry are listed below: Deals worth Rs 8,000 crore (US$ 1.19 billion) were made at the Indian International Jewellery Show held in August 2018. Consumption of Jewellery in India will get Stronger India is back to being number one in gold Jewellery consumption by volume, still number one in diamond Jewellery consumption by volume and number four in platinum Jewellery consumption. The country can remain the most important marketplace for precious Jewellery in terms of potential for many years to come back. However, what's less clear is that the anticipated level of income growth. As an instance, many of us believe India is that the next China in terms of economic growth potential. At Equity Communications, view is that such beliefs are most optimistic based on understanding of India's structural deficiencies and business culture problems. Thinking is that india can stumble on at four to 7 percent annual gdp rate of growth - however still good enough to move a large number of Indians out of poverty. Like each different category, Jewellery also saw a tremendous growth this year. There was ne'er a much better time to enter into this market. The audience is ready, the backend process is set up, logistic chains are established, and most importantly customers trust is established. In addition to the current, new millennial generation buys Jewellery differently. They’re not progressing to family jewelers anymore; most of them are placed far away from home and would trust a worldwide online brand more than an offline store in their current city. Related Projects: - Project Reports & Profiles The growth potential is phenomenal in current scenario. Next few years will definitely see hockey stick growth in Jewellery category. Currently imitation leads this race, closely followed by precious. In current scenario also imitation has already captured 3% of overall market and growing with CAGR of 32%. Market Outlook The demand of Gold Jewellery demand in India has been subdued within the last 5 years ending FY19, affected by series of regulatory measures aimed at purging black money and formalizing the business and fall in investment demand given its lower returns compared to different quality categories. Demand for gems and Jewellery in India is predominantly concentrated within the southern region. South India gems and Jewellery market is probably going to register growth over the course of next 5 years, primarily because of the presence of a large range of market players and aggressive marketing strategies adopted by companies. Moreover, increasing brand consciousness along with rising middle class population in the region is expected to aid the region’s gems & Jewellery market. India’s Jewellery and gem sector is among the fastest growing industries of the country, with the speed of growth recorded at approximately 15%. The most reason for the growth of the Jewellery business is attributed to domestic consumption during the festive seasons, wedding season, the monsoons and therefore the performance of the harvest. For instance, a firm that produces gold Jewellery might agree to sell the metal to customers as they physically purchase gold. Say if a jeweller needs 200 ounces of gold to produce 1000 gold rings. The production process might consume two weeks of his / her time, and within the same period, the consumer might not be willing to deal with the price risk. In this case, the jeweller might value more highly to sell a gold contract (200 ounces) on one in every of the gold exchanges and purchase physical gold at the same time for production purposes. Increasing disposable income and innovative Jewellery designs offered by manufacturers are anticipated to drive the demand for jewelry. Moreover, changing lifestyle and perception of Jewellery as a standing symbol is expected to boost the growth of this market. To boot, growing acceptance of Jewellery among men is another factor propelling market growth. Products similar to cufflinks, plain gold chains, cufflinks, tie bar, cartography necklaces, and signet rings are few of the products common among men. Gold is that the most popular metal used for making Jewellery across the globe. It held the most important market share and was valued at USD 117.1 billion because of increase in exports and imports of gold. Increasing of developing countries like India and China is one in all the most important reasons for the growth of gold Jewellery. Moreover, engagement and wedding diamond rings are quite common in most of the developed countries. In addition, availability of synthetic or laboratory-grown diamonds is propelling the growth of the diamond Jewellery segment. Synthetic diamonds are as real as natural diamonds as they need a similar internal structure. However, these diamonds are 20%-40% less expensive as compared to natural diamonds. Based on its potential for growth and value addition, the government of India has declared the Gems and Jewellery sector as a focus area for export promotion. The government has recently undertaken various measures to market investments and to upgrade technology and skills to promote ‘Brand India’ within the international market. Diamond-studded rings are gaining traction because of increase in demand for diamond Jewellery. Additionally, platinum love rings are becoming popular and are worn by many couples as a symbol of love. Moreover, many Brazilian styles involve rings with various colorful gems mounted on them. Rising customer inclination towards studded Jewellery could be a key factor boosting the segment growth. India is that the world’s largest cutting and polishing centre for diamonds, with the cutting and polishing business being well supported by government policies. Moreover, India exports 75 per cent of the world’s polished diamonds, as per statistics from the Gems and Jewellery Export promotion Council (GJEPC). India's Gems and Jewellery sector has been contributing during a big way to the country's exchange earnings (FEEs). The government of India has viewed the sector as a thrust area for export promotion. The Indian government presently permits 100 per cent Foreign Direct Investment (FDI) within the sector through the automatic route. The world employs over 4.64 million employees and is expected to use 8.23 million. Related Books: - BOOKS & DATABASES The diamond jewelry market was valued at about 82 billion U.S. dollars worldwide. Silver and platinum are two other commonly used jewelry materials, though platinum jewelry has seen a decrease in popularity over the last several years. Dollar strength is the major factor behind the rise in the prices of gold and silver. When dollar weakens, investors from around the world begin to sell the currency and buy gold in exchange for security purposes. Owing to this factor, the demand for gold increases which results in increase in the price of gold. This factor poses to be a huge restraint in the jewelry manufacturing market. In addition, poor economic condition is another factor acting as a hindrance to the global jewelry manufacturing market. Weak economic conditions force the investors to put their money on gold, due to which the price for gold goes up. Jewelry includes ornaments that are worn for personal adornment. Jewelries are made of gold, diamond, and other precious metals such as platinum, silver, and gems. Jewelries play an important role in the lifestyle of Indian people and they associate jewelries with a number of reasons such as status, long-term investment, and hedge against inflation. The Gems and Jewellery sector plays a significant role in the Indian economy, contributing around 7 per cent of the country’s GDP and 15 per cent to India’s total merchandise exports. It also employs over 4.64 million workers and is expected to employ 8.23 million by 2022. One of the fastest growing sectors, it is extremely export oriented and labour intensive. Based on its potential for growth and value addition, the Government of India has declared the Gems and Jewellery sector as a focus area for export promotion. The Government has recently undertaken various measures to promote investments and to upgrade technology and skills to promote Brand India in the international market. Key Players A B Jewels Pvt. Ltd. A V R Swarnamahal Jewelry Pvt. Ltd Bhagyam Gem & Jewellery Pvt. Ltd. Damara Gold Pvt. Ltd. Colibri Group Billig Jewelers Swarovski Group Senco Gold Ltd Shangold India Ltd. Shri Coimbatore Jewellers India Pvt. Ltd. Kalyan Jewellers India Private Limited PC Jewellers Limited Gitanjali Gems Limited Malabar Gold Private Limited Tags:- #goldjewellery #jewellery #90sjewellery #goldjewellerybusiness #jewelleryindustry #goldjewelleryindustry #goldjewellerymarket #Indianjewelleryindustry #goldbusinesses #Indiasjewellerytrade #GoldTrade #Jewelry #DetailedProjectReport #businessconsultant #BusinessPlan #marketresearchreport #feasibilityReport #NPCS #startupideas #startupbusinessideas #businessestostart #entrepreneurindia #startupbusiness #businessstartupindia
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Aluminium Foil (Food Packaging and Pharmaceuticals Foils)

Aluminium plays a major role in the modern world through its innumerable forms of applications- from kitchenware to electric conductors and from railway wagon to Appollo spacecraft. Because of its intrinsic and versatile properties of lightness, strength to weight ratio, corrosion resistance, electrical and thermal conductivity, non toxicity etc., a wide range of uses has opened up for this metal. As a result, it has captured the market at the expense of older materials- copper, lead, zinc and steel among metals and glass, wood and paper among no metals. In fact, next only to steel, aluminium is the most widely used metal in the world today. Aluminium as a packaging material is unmatched owing to its lightweight, hygienic and non-contamination which eventually results in longer shelf-life of end products. The user of foil always wishes to get the largest area where his money and foil is used in packaging as thin as 0?008 mm, when it has a covering area of 32,300 square inches to the pound. When the metal is as thin as this it is not only physically weak but will contain minute perforations very thin foil is a less efficient barrier than is thicker foil free from perforations. The global aluminium foil packaging market size will reach $46.19bn by 2025, with a revenue-based compound annual growth rate (CAGR) of 4.0% over the forecast period, the industry’s growth to the increasing demand for packaging in the food and beverage and pharmaceutical industries. Tobacco, cosmetic, and electronic industries are also set to create growth opportunities for the aluminium market. Aluminium is a recyclable material that can be found in abundance and aluminium foil is strong, lightweight, portable, flexible, and mouldable. Aluminium foil is used in the pharmaceutical industry to package various types of medicine because it offers protection from moisture and sunlight. The increased need for aluminium in the industry comes as a result of increased demand for drug delivery devices and blister packaging. The demand for aluminium packaging to the rising demand for ready-to-eat food products in the food and beverage industry. It says: “Fast-paced lifestyle, ease of ordering through online platforms, and the ability to choose from diverse restaurants are the significant factors that have surged demand for online food delivery, which in turn, is expected to drive the market in near future.” Aluminium is used in the food and beverages industry for packaging solutions which including foil wraps, pouches, blisters, and containers. Foil wraps, in particular, are used by households to wrap food products and have witnessed a surge in demand due to the growing food delivery services in growing economies such as India, China, and Brazil. In pharmaceutical end-use segment, aluminum foil is largely used for packaging drugs in the form of blisters. Pharmaceutical packaging industry also uses foil pouches to pack fluid drugs. Aluminum foil is also used in the form of caps, lids, and closures for plastic containers. Pharmaceutical end user industry segment is expected to be growing at the second fastest CAGR over the forecast period. Aluminum foil blisters are widely used in the pharmaceutical industry for packaging capsules and tablets. Factors, such as the shift toward busy lifestyles and adoption of unhealthy lifestyle have resulted into high prevalence of chronic diseases. In addition, increasing number of health campaigns by various government and non-government organizations has resulted in growth of the pharmaceutical industry boosting the demand for medicines. This factor is projected to drive the product demand in near future.
Plant capacity: Food Packaging Grade Aluminium Foil: 10.0 MT / day Pharmaceutical Grade Aluminium Foil:10.0 MT / dayPlant & machinery: 1413 lakhs
Working capital: -T.C.I: Cost of Project:Rs 2190 lakhs
Return: 28.00%Break even: 62.00%
Add to Inquiry Add to Inquiry Basket

Porcelain Insulators

An electrical insulator is a material whose internal electric charges do not flow freely, and therefore make it nearly impossible to conduct an electric current under the influence of an electric field. This contrasts with other materials, semiconductors and conductors, which conduct electric current more easily. The property that distinguishes an insulator is its resistivity; insulators have higher resistivity than semiconductors or conductors. Low-tension insulators are used for A.C. & D.C. power supplies of not more than 600 volts. Low tensions insulators are manufactured in both glazed and unglazed insulators are quite satisfactory. Insulators required for use in humid atmosphere are invariably glazed. Glazed insulators are used in lighting arrestors in radio receivers, telephone and utility outfits and neon signs. Some L.T. insulators like nail knobs, tubes & cleats are glazed on one side. Voltage above 1000 Volts is generally considered as high tension for long distance Electric power transmission; high voltage is essential because it reduces the cross/section and, therefore, the weight of the conductor required. Porcelain insulators are suitable for high tension transmission & distribution are required to be effective at high voltages and under extreme climate conditions of rain, snow, high wind of soaring heat. The global Porcelain Insulators Market has grown significantly over the past few years and is anticipated to expand at a rapid pace till 2026. This market study provides an in-depth assessment on market size and year on year growth of global Porcelain Insulators Market in terms of revenue, various levels of in-depth market segmentation, market dynamics which comprises of the demand side, supply-side and economy side drivers, market restraints, challenges and opportunities and trends which are prevailing in this market and impacting the growth of the market. Worldwide Porcelain Insulators Market highlights its existing absolute $ opportunity. Further, this market is likely to achieve considerable absolute $ opportunity by the year 2026 as compared to the value achieved in the year 2018. Growing investments toward the expansion of Transmission & Distribution (T&D) infrastructure to support the ongoing large-scale renewable power integration will propel the high voltage porcelain insulators market growth. Rising focus of utilities toward strengthening and modernization of grid networks along with introduction of ambitious renewable integration target of governments will further complement the industry landscape. Surging investments toward the refurbishment and replacement of aging electrical infrastructure across the developed economies coupled with the growing adoption of smart grid technologies will drive the porcelain insulators market growth. As per the U.S. Energy Information Administration (EIA), in 2017, major utilities across the country had invested over USD 50 billion toward expansion and strengthening of nation’s distribution networks. An electrical insulator is a material whose internal electric charges do not flow freely, and therefore make it nearly impossible to conduct an electric current under the influence of an electric field. This contrasts with other materials, semiconductors and conductors, which conduct electric current more easily. The property that distinguishes an insulator is its resistivity; insulators have higher resistivity than semiconductors or conductors Few Indian major players are as under Meister International National Switchgears ZPE ZAPEL Aditya Birla Insulators Power-grid Switchgears PPC Insulators Yigang Precision Ceramics
Plant capacity: Porcelain Insulators:500.0 MT / dayPlant & machinery: 695 lakhs
Working capital: -T.C.I: Cost of Project:Rs 2804 lakhs
Return: 29.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Solar Panel

Solar panel refers either to a photovoltaic module, a solar thermal energy panel, or to a set of solar photovoltaic (PV) modules electrically connected and mounted on a supporting structure. A PV module is a packaged, connected assembly of solar cells. Solar panels can be used as a component of a larger photovoltaic system to generate and supply electricity in commercial and residential applications. Each module is rated by its DC output power under standard test conditions (STC), and typically ranges from 100 to 320 watts. The efficiency of a module determines the area of a module given the same rated output - an 8% efficient 230 watt module will have twice the area of a 16% efficient 230 watt module. There are a few solar panels available that are exceeding 19% efficiency. A single solar module can produce only a limited amount of power most installations contain multiple modules. A photovoltaic system typically includes a panel or an array of solar modules, an inverter, and sometimes a battery and/or solar tracker and interconnection wiring. India solar power products market is projected to grow at a CAGR of more than 11% to surpass $ 7.6 billion by 2024 on the back of increasingly stringent policy and regulatory framework and rising environmental concerns. The Ministry of New and Renewable Energy has set a target of 100 GW of solar power generation capacity by 2022. To achieve the target, government has taken several initiatives in the form of offering subsidies, financial assistance, incentives to manufacturers, power producers and even customers. The government has also partnered with several nodal agencies at the central and state levels for the installation of off-grid SPV systems. Subsidies are made available to the customers to encourage installation of grid connected rooftop photovoltaics. Additionally, rising per capita income and developments in the photovoltaic technologies are further anticipated to positively influence India solar power products market during forecast period. Few Indian major players are as under Alectrona Energy Pvt. Ltd Alpex Solar Pvt. Ltd. Bright Solar Ltd. Central Electronics Ltd. Devsun Solar Pvt. Ltd
Plant capacity: Solar Panel:83.3 KW / dayPlant & machinery: 162 lakhs
Working capital: -T.C.I: Cost of Project : Rs 804 lakhs
Return: 28.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Groundnut Oil Production and Refining

Groundnut is an important oilseed crop in Nigeria and one third of these seeds is processed for edible oil. Groundnut oil is the main natural edible oil consumed without additives in the middle Mediterranean region. Groundnut oil is one of the most stable vegetable oils in relation to oxidation. The oxidative stability of oils may be influenced by many factors, such as light, metal ions, oxygen, temperature, and enzymes. Groundnut oil is composed of ?80% of unsaturated fatty acids, with oleic acid comprising an average of ?50% and linoleic acid 30% of the total fatty acid composition. Groundnut oil is a vegetable oil derived from groundnuts. It is also called peanut oil. The oil has a strong peanut flavor and aroma. It is often used in American, Chinese, South Asian and Southeast Asian cuisine, both for general cooking, and in the case of roasted oil, for added flavor. Nigeria is the largest groundnut producer in Africa. This year, the production is expected to total around 3 million metric tons, making it the 3rd largest producer in the world, after China and India. During the 1960s, Nigeria was also the largest groundnut exporter in the world, but currently, most of its groundnut production is meant for domestic consumption. Prices in the Nigerian groundnut market are expected to rise this year due to increased domestic and international demand. Groundnuts in Nigeria are mainly produced in the Northern states: Adamawa, Niger, Taraba, Kaduna, Benue, and Kano. During the 1960s and 1970s, when Nigeria discovered the profitability of producing and exporting groundnuts, these states were filled with ‘groundnut pyramids.’ These pyramids were made of bags filled with groundnuts, which were waiting to be exported. Over time, Nigeria shifted its focus from agriculture to oil and the groundnut industry became less important. The groundnut pyramids disappeared. Over the recent year, however, groundnuts have once again become an interesting product for Nigerian farmers, due to the increased demand for groundnut oil and groundnut butter
Plant capacity: Groundnut Oil (1 Ltr Bottle each):20,000 Packs / day Groundnut Cake (25 Kgs each):1,140 Packs / dayPlant & machinery: 190 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1760 lakhs
Return: 35.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Disposable Face Masks

A surgical mask, also known as a procedure mask, medical mask or simply as a face mask, is intended to be worn by health professionals during surgery and during nursing to catch the bacteria shed in liquid droplets and aerosols from the wearer's mouth and nose. They are not designed to protect the wearer from inhaling airborne bacteria or virus particles and are less effective than respirators, such as N95 or FFP masks, which provide better protection due to their material, shape and tight seal. Surgical masks are designed to keep operating rooms sterile, preventing germs from the mouth and nose of a wearer from contaminating a patient during surgery. Although they have seen a rise in popularity among consumers during outbreaks such as the coronavirus, surgical masks are not designed to filter out viruses, which are smaller than germs. The global market for surgical mask can be segmented on the basis of the following parameters: product, distribution channel, and region. On the basis product, the global surgical mask can be segmented into anti-fog surgical mask, basic surgical mask, fluid/splash resistant surgical mask, N95 mask, and others. Amongst these, the market for basic surgical mask has flown in from multiple healthcare facilities. The key distribution channels for surgical masks are drug stores, hospitals and clinics, and online stores. The effectiveness of surgical face mask in blocking the transmission of SARS is 68%. Therefore, it is widely used by medical workers as part of droplet transmission precaution when caring for patients with respiratory infections. Hence, increase in use of surgical face masks is projected to fuel the growth of the global surgical face masks market. Furthermore, vulnerable populations, such as older adults with chronic conditions, are at high risk of infectious diseases, including COVID-19. Hence, the use of face mask to prevent infections by the geriatric population is anticipated to drive the global market. The world is currently experiencing the pandemic of an infectious disease called COVID-19. This infection leads to multiple organ failure, acute & severe respiratory disorders, pneumonia, and even death in severe cases. Hence, surge in number of people with coronavirus infections is anticipated to drive the global surgical face masks market. According to the World Health Organization, globally, 823,626 confirmed and 72,736 new cases of COVID-19. Additionally, in the context of the novel coronavirus (2019-nCoV) outbreak, the World Health Organization recommends the use of masks in home and health care settings. This in turn increases demand for surgical marks. Hence, rise in demand for surgical masks is likely boost the growth of the global market. The use of face mask is vital to control infectious diseases, especially in circumventing droplet transmission. Few Indian major players are as under 3M India Ltd. Good Health Insurance T P A Ltd. Kimberly-Clark India Pvt. Ltd. Mediklin Healthcare Ltd. Surgeine Healthcare (India) Pvt. Ltd.
Plant capacity: Surgical Face Masks (each Pkts 25 Pcs.): 1,694 Pkts / day N95 Face Masks (each Pkts 5 Pcs.): 8,467 Pkts / dayPlant & machinery: 688 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1400 lakhs
Return: 27.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Baby & Adult Diaper and Sanitary Pads

Modern disposable baby diapers and incontinence products have a layered construction, which allows the transfer and distribution of urine to an absorbent core structure where it is locked in. Basic layers are an outer shell of breathable polyethylene film or a nonwoven and film composite which prevents wetness and soil transfer, an inner absorbent layer of a mixture of air-laid paper and superabsorbent polymers for wetness, and a layer nearest the skin of nonwoven material with a distribution layer directly beneath which transfers wetness to the absorbent layer. Thus, due to this property, the diapers are gaining huge consumption amongst the baby as well as adult population. Further, it is anticipated that the Baby Diaper market is expected to reach around INR 200 Billion by 2022, growing at a double digit CAGR over the forecasted period 2017-2022. Other common features of disposable diapers include one or more pairs of either adhesive or Velcro tapes to keep the diaper securely fastened. Some diapers have tapes which are refastenable to allow adjusting of fit or reapplication after inspection. Elasticized fabric single and double gussets around the leg and waist areas aid in fitting and in containing urine or stool which has not been absorbed. This is due to lack of awareness and economic inability for adopting better precautions like use of good sanitary napkins during menstruation period. Usually different varieties of sanitary napkins are found available in the market but they are very expensive and are not affordable for rural & under-privileged women and girls. In India, the technology for sanitary napkins available by processing of raw cotton spinning and weaving to napkins. On small scale, the processed cotton is purchased which is spinned and woven. Previously, in Japan, absorbent cotton was used for the purpose. But the use of absorbent cotton limited bodily movement considerably. P&G’s Pampers dominates the overall diaper industry, followed by Huggies and Mamy Poko. P&G’s lack of innovation and focus on higher margins amid aggressive strategies adopted by its competitors to increase their market share is expected to decrease brand’s market share in future. Japanese firm Unicharm, which sells Mamy Poko diapers, overtook Kimberly Clark in baby diaper segment nearly two years ago. In baby diaper segment, Pampers, Mamy Poko and Huggies constitute more than 85% of the market by value whereas in adult diaper segment, Nobel Hygiene and Actifit dominate the industry heavily. This facilitates the development of new technologies and ensures a high quality product. Few Indian major players are as under Carewell Hygiene Products Ltd. Centron Industrial Alliance Ltd. Diapers India Ltd. Godrej Hygiene Products Ltd. Gufic Biosciences Ltd.
Plant capacity: Baby Diapers (4 Pcs.): 84,000 Pkts./ day Adult Diapers (4 Pcs.):18,000 Pkts./ day Sanitary Pads (8 Pcs.): 48,000 Pkts./ dayPlant & machinery: 2167 lakhs
Working capital: -T.C.I: Cost of Project : Rs 4596 lakhs
Return: 31.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Baby & Adult Diaper and Sanitary Pads

Modern disposable baby diapers and incontinence products have a layered construction, which allows the transfer and distribution of urine to an absorbent core structure where it is locked in. Basic layers are an outer shell of breathable polyethylene film or a nonwoven and film composite which prevents wetness and soil transfer, an inner absorbent layer of a mixture of air-laid paper and superabsorbent polymers for wetness, and a layer nearest the skin of nonwoven material with a distribution layer directly beneath which transfers wetness to the absorbent layer. Thus, due to this property, the diapers are gaining huge consumption amongst the baby as well as adult population. Further, it is anticipated that the Baby Diaper market is expected to reach around INR 200 Billion by 2022, growing at a double digit CAGR over the forecasted period 2017-2022. Other common features of disposable diapers include one or more pairs of either adhesive or Velcro tapes to keep the diaper securely fastened. Some diapers have tapes which are refastenable to allow adjusting of fit or reapplication after inspection. Elasticized fabric single and double gussets around the leg and waist areas aid in fitting and in containing urine or stool which has not been absorbed. This is due to lack of awareness and economic inability for adopting better precautions like use of good sanitary napkins during menstruation period. Usually different varieties of sanitary napkins are found available in the market but they are very expensive and are not affordable for rural & under-privileged women and girls. In India, the technology for sanitary napkins available by processing of raw cotton spinning and weaving to napkins. On small scale, the processed cotton is purchased which is spinned and woven. Previously, in Japan, absorbent cotton was used for the purpose. But the use of absorbent cotton limited bodily movement considerably. P&G’s Pampers dominates the overall diaper industry, followed by Huggies and Mamy Poko. P&G’s lack of innovation and focus on higher margins amid aggressive strategies adopted by its competitors to increase their market share is expected to decrease brand’s market share in future. Japanese firm Unicharm, which sells Mamy Poko diapers, overtook Kimberly Clark in baby diaper segment nearly two years ago. In baby diaper segment, Pampers, Mamy Poko and Huggies constitute more than 85% of the market by value whereas in adult diaper segment, Nobel Hygiene and Actifit dominate the industry heavily. This facilitates the development of new technologies and ensures a high quality product. Few Indian major players are as under Carewell Hygiene Products Ltd. Centron Industrial Alliance Ltd. Diapers India Ltd. Godrej Hygiene Products Ltd. Gufic Biosciences Ltd.
Plant capacity: Baby Diapers (4 Pcs.): 84,000 Pkts./ day Adult Diapers (4 Pcs.):18,000 Pkts./ day Sanitary Pads (8 Pcs.): 48,000 Pkts./ dayPlant & machinery: 2167 lakhs
Working capital: -T.C.I: Cost of Project : Rs 4596 lakhs
Return: 31.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 162 of 254 | Total 2538 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 162 253 254   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top