Google Search

Search

Already a Member ?

Best Business Opportunities in Telangana- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Telangana is a state in the Southern region of India. It has an area of 114,840 km2 and is the twelfth largest state in India. Most of it was part of the princely state of Hyderabad, ruled by the Nizam of Hyderabad during the British Raj, joining the Union of India in 1948. Telangana was separated from Andhra Pradesh as a new 29th state of India, with the city of Hyderabad as its capital. Hyderabad will continue to serve as the joint capital city for Andhra Pradesh and Telangana for a period of not more than ten years. Telangana is situated on the Deccan Plateau, in the central stretch of the eastern seaboard of the Indian Peninsula. It covers 114,800 square kilometers (44,300 sq. mi). The region is drained by two major rivers, with about 79% of the Godavari River catchment area and about 69% of the Krishna River catchment area, but most of the land is arid. Telangana region has rich natural resources. About 45 per cent of the forest area in Andhra Pradesh state is in Telangana region while 20 per cent of the country's coal deposits in the country are also found here. Telangana is also rich in limestone deposits that cater to cement factories. Telangana has other mineral resources like bauxite and mica. Perennial rivers Godavari and Krishna enter Andhra Pradesh in Telangana before flowing down through other regions and ending up in the Bay of Bengal. Telangana region is sitting on potential oil and natural gas reserves, according to a report by Director General of Hydrocarbons (DGH). Telangana has a significant amount of Software export in India. While majority of the Industry is concentrated over Hyderabad, the other cities are also becoming significant IT destinations in the state. Hyderabad's IT exports exceeded $7 billion in 2014.There have been extensive investments in digital infrastructure.

 

AGRICULTURE

Rice is the major food crop and staple food of the state. Other important crops are tobacco, mango, cotton and sugar cane. Agriculture has been the chief source of income for the state's economy. Important rivers of India are the Godavari, Krishna flow through the state, providing irrigation. Telangana agriculture department separated from Andhra Pradesh as part of Andhra Pradesh bifurcation It aims promote agricultural trade and to boost up the agricultural production and productivity in the Telangana.

 

TOURISM IN TELANGANA

Telangana State Tourism Development Corporation (TSTDC) is a state government agency which promotes Tourism in Telangana. Telangana has a variety of tourist attractions including historical places, monuments, forts, water falls, forests and temples. Charminar, Golconda Fort, QutbShahi Tombs, Chowmahalla Palace, Falaknuma Palace and Bhongir Fort, are some of the monuments in the state. The Charminar, built in 1591 CE, is a monument and mosque located in Hyderabad, Telangana, India.

 

DEMOGRAPHIC PROFILE

Telangana with a population of 351.9 lakhs (according to the 2011 census) accounts for about 3.6% percent of the total population of India. Out of this, 177.0 lakhs (50.2%) are males and 174.9 lakhs (49.8%) are females. The sex ratio of the state is 988 as against the national figure of 943. The population density in the state is 307 persons/Sq.Km. In 2012-13, the services sector at Rs.  1, 14,046 crores, contributed 58.1% to the GSDP (at constant prices). It is followed by industry sector, contributing 27.9% (Rs. 54,687 crores) and the agriculture sector’s contribution of 14% (Rs. 27,450 crores). The services sector had fastest growth  of  11.31%  followed  by  industry  sector  (10.04%)  and  agriculture  sector  (6.89%) between 2004-05 and 2012-13.

The Telangana government has proposed to add 230 crore plants in the next three years under a flagship programme which envisages boosting of tree cover in the state by nearly 8%.

 

FOOD AND INDUSTRIAL PROCESSING SECTOR

The Telangana government plans to put greater emphasis on value-addition in the farm sector in its industrial policy. The departments of industry and commerce, agriculture and agro marketing would coordinate together to achieve value maximization for farmers. The government is also keen on encouraging e-marketing activities, which involves networking all agriculture mandis in the state so that farmers get access to prevailing prices across important markets and thereby helping them unlock the right value for their produce. The state in collaboration with research institutes in the country would facilitate an ideal adoption of latest practices ranging from seed technology and farm machinery to improve farm productivity. the state government is also considering specific projects such as setting up a pharmaceutical city near Hyderabad and a cotton hub in Warangal district, the largest producer of long-staple cotton. The Telangana government has begun a survey to identify land that can be offered to new industries in the state. The Telangana government is set to announce its new industrial policy under which scheduled castes and scheduled tribe entrepreneurs would be specially encouraged.

Telangana Government is mulling to set up a 'Pharma City' near the state capital in about 8,000 acres. The City will include industries as well as residential colony, and a power plant with 500 MW capacity will be set up adjacent to the pharma city to provide captive, dedicated and uninterrupted power supply to the industry. The pharma city is expected to accommodate about five lakh employees besides their families in the residential colony touching about twenty lakh over a period. Delegation of Drugs Manufacturers' Association that an international consultancy organisation with expertise in developing in the information technology and pharmaceuticals manufacturing sectors may become backbone of Telangana economy, leaving power production, ports and oil and natural gas to play a pivotal role in driving prosperity in the residuary state. Industrial estates should be contacted to design the pharma city. Telangana's per capita income of Rs 24,409 in 2004-05 has phenomenally grown to a whopping Rs 83,020. While Hyderabad has less number of households using open toilets at 0.9 per cent, Mahabubnagar is at 71.1 per cent. The land-locked state is expected to have nearly Rs 4,000 crore surplus budget, but lingering power deficit may force the new government to spend more on the power purchase. Telangana, spread in 1,14,840 square kilometres, has 66.46 per cent literacy rate with a population of 3.52 crore.

 

ECONOMY OF TELAGANA

The Economy of Telangana is mainly driven by agriculture. Two important rivers of India, the Godavari and Krishna, flow through the state, providing irrigation. Rice, cotton, mango and tobacco are the local crops. Recently, crops used for vegetable oil production such as sunflower and peanuts have gained favour. There are many multi-state irrigation projects in development, including Godavari River Basin Irrigation Projects and NagarjunaSagar Dam, the world's highest masonry dam. Telangana is a mineral-rich state, with coal reserves at SingaerniColleries. The population of Telangana is over 35 million now – much more than 30 million for the whole of Andhra Pradesh, including Telangana, at the time of its formation in 1956. The demands on governance have multiplied over this half a century. Apart from commitment to the development of the region, a smaller state being more easily accessible to the common people can intelligently and speedily grapple with their problems.

 

INDUSTRIAL POLICY FRAMEWORK FOR STATE OF TELANGANA

Industrialization will be the key strategy followed for economic growth and development for Telangana, the 29th state of the country. People of the new state have very high expectations from the Telangana State Government for creating jobs for the youth, promote development of backward areas, maximize growth opportunities by optimum utilization of the available resources, harness the talents and skills of the people etc. The Government of Telangana State realizes that industrial development requires large-scale private sector participation, with the government playing the role of a facilitator and a catalyst. The government is committed to provide a graft-free, hassle-free environment in which the entrepreneurial spirit of local, domestic and international investors will thrive to take up their industrial units in the state of Telangana as the preferred investment destination.

The new Telangana State Industrial Policy will be rooted in certain core values, as follows:

 

                • The Government regulatory framework shall facilitate industrial growth

                • Entrepreneurs will thrive in a peaceful, secure and progressive business regulatory                                        environment

                • Industrial development will lead to massive creation of jobs benefitting local youth

                • Industrialization shall be inclusive and facilitate social equality

 

The new Telangana State Industrial Policy will strive to provide a framework which will not only stabilize and make existing industries more competitive, but also attract and realize new international and national investments in the industrial sector. It is expected that the most significant outcome of this approach will be the production of high quality goods at the most competitive price, which establishes “Made in Telangana-Made in India” as a brand with high global recognition. The Industrial Policy Framework has the following mandate for departments that have any responsibility in the industrialization of the State—Minimum Inspection and Maximum Facilitation.

The Government of Telangana State is determined to create an ecosystem in which the ease of doing business in the state matches and even exceeds the best global standards. Telangana State Government is aware that offering a hassle-free system is considered to be of the highest priority by the industrialists, and accordingly the government will implement a very effective industrial clearance system that will go beyond the traditional single window system.

 

THRUST AREAS AND CORE SECTORS

•             Life Sciences including, bulk drugs, formulations, vaccines, nutraceuticals, biological,   incubation centers, R&D facilities and medical equipment.

•             IT Hardware including bio-medical devices, electronics, cellular communications.

•             Precision engineering, including aviation, aerospace, defence.

•             Food processing and nutrition products including dairy, poultry, meat and fisheries.

•             Automobiles, Transport Vehicles, Auto-components, Tractors and Farm Equipment.

•             Textiles and Apparel, Leather and leather value added products like shoes, purses, bags,         artificial   material infused and coated textiles, paper and paper products.

•             Plastics and Polymers, Chemicals and Petro-chemical, glass and ceramics.

•             FMCG and Domestic Appliances.

•             Engineering and Capital Goods, including castings, foundry and Ferro-alloys and other    metallurgical industries.

•             Waste Management and Green Technologies.

•             Renewable Energy and Solar Parks.

•             Mineral-based and wood-based Industries.

•             Transportation/Logistic Hub/Inland Port/Container Depot.

 

Telangana has emerged as a State that provides that right climate for the growth of IT business and is now one of the most preferred destinations in the Country.

The State of Telangana is poised towards creating a benchmark in Information & Communication Technology (ICT) endowed with a high quality state-of-the-art physical & communication infrastructure of international standards, harnessed human resources, and proactive business friendly policies of the Government.

It is estimated that about 20 lakh acres of land is available in the state that has been identified as unfit for cultivation in Telangana. Based on a detailed survey of these land parcels and identification of those parcels that are fit for industrial use, an industrial land bank for the State of Telangana will be developed.

The development of industrial and related infrastructure will be the responsibility of the Telangana State Industrial Infrastructure Corporation (TSIIC). The financial base of the TSIIC will be strengthened and it will be made to function as an effective organization. All lands in the State identified as fit for industrial use will be transferred to the TSIIC.

To support industrialization, the Government of Telangana will earmark 10% of water from all existing and new irrigation sources for industrial use. Water pipelines will be laid as a part of infrastructure creation for each industrial park by TSIIC. The Government of Telangana State recognizes that quality power and uninterrupted power supply are keys to the growth of the industrial sector. The State has a clear short-, medium-, and long-term plans to first overcome the power shortage and eventually become a power surplus state. Accordingly, uninterrupted power supply will be arranged in each industrial park. The Telangana State Government will encourage usage of non-conventional energy for industrial purposes.

The Telangana State Government is committed to encourage the process of industrialization by making various kinds of incentives available to the entrepreneurs. The Telangana State Government also assures an entrepreneur-friendly and graft-free regime of disbursing the incentives. The Telangana State Government will consider providing incentives to the entrepreneurs in the following areas-

•             Stamp duty reimbursement

•             Land conversion cost

•             Investment subsidy

•             VAT reimbursement

•             Interest subsidy

•             Clean production measures

•             Reimbursement of infrastructure development costs etc.

A sound industrial policy has to ensure that the state taxation structure is conducive to industrial growth and state financial resource augmentation. Distortions in the tax structure leads to evasion of taxes and clandestine transport of industrial inputs and outputs to neighbouring states, which may have advantageous tax rates. The presence of important national and state highways, coupled with the availability of resources and opportunities, provides a great potential for development of industrial corridors in the state along these roadways.

The Industrial Corridors that will be developed initially will be:

 

1) Hyderabad-Warangal Industrial Corridor

2) Hyderabad-Nagpur Industrial Corridor

3) Hyderabad-Bengaluru Industrial Corridor

The new Industrial Policy brought out by the Government of Telangana promises to revolutionise the way industrial sector has been viewed by successive governments in this country. A day is not far when the new Industrial Policy of Telangana will shine as an exemplar among the best in the world.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 17 of 175 | Total 1741 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 174 175   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Maize Wet Milling Process - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Profile Maize is third important cereal/crop after wheat and rice and has a great potential of processing due to its high nutritive value and commercial uses. Maize (also known as corn) is common name for a cereal grass widely grown for food and livestock fodder. Maize ranks with wheat and rice as one of the world’s chief grain crops. Starch is produced from maize than any other crop. Maize is the most important raw material for industrial starch. Other products are germ; corn gluten and fiber. There is basic series of dry milling or wet milling process required for getting optimum quality products. Both the milling processes have merits and demerits of the quality of products and cost effectiveness. In case of wet milling there is series step for cleaning, steeping wet grinding centrifuging, drying and packaging. The whole wet milling process required large amount of demineralized water. There is also larger amount environmental pollution problem, which should be neutralized by preliminary treatment to get neutral effluent. There is larger amount of raw material available in India, which can exploit by manufacturing different available product in the maize. Manufacturing process technology is available in India, for the manufacturing of maize base products. Major plant and machineries are available in India. Few of them require to import. All the products manufactured from maize are food base product so it has very good market demand now as well as it will be stay in future also due to rapid population growth. As a whole the project is good one. Properties Starch: It is white, amorphous non crystalline powder, it can be acid hydrolyzed to form dextrose or it may be enzymatic hydrolysis to form dextrose. It is insoluble in water and forms irreversible gel in the hot water. It swells water at room temperature Zein/Maize Protein: White to slightly yellow powder; odorless, nontoxic protein of the prolamine class, derived from corn; contains 17 amino acids; tasteless; free of cystine, lysine, and tryptophane. A resinous material dispersible in water with neutral sulfonated castor oil; soluble in dilute alcohol; insoluble in water, dilute acids, anhydrous alcohol, turpentine, esters, oils, fats; d 1.226 Combustible. Germ: It is yellowish solid product & Content mostly total part as fat. Fiber: It is bright yellow crystal powder, ash content about 5% ? Applications Maize has several kinds of applications in the form of maize starch, maize fiber, germ, corn etc. Maize starch forms viscous, relatively short and opaque paste with cereal flavor. Its paste sets to stiff gels. It is widely used for thickening sauces, gravies, puddings and pie fillings. Maize starch finds numerous uses in the bakery industry for the production of cakes, cookies, in ice cream preparations etc. In Paper industry a large quantity of starch is consumed as a surface sizing agent, as a binder, as a paper coating agent etc. In textile industry, starch is used in sizing to strengthen the warp yarn, in finishing and changing the appearance of fabric after it is bleached, dyed or printed, in printing and increase the consistency of printing pastes. Also starch is used as a component in finishing agent to glaze and polish sizing thread. Maize Fiber can be used for the preparation of cattle feed production, manufacturing of non caloric high fiber food products, essential chemicals, vitamins and for making of natural food colour. Germ is used for making corn oil; maize (corn) protein is used for manufacturing of gluten, preparation of glutanic acid as well as other available amino acids. It may also be used for the protein substitute in the different food products. Market Scenario The production of maize is likely to go up by 19 per cent to touch 21 million tons in 2010 11. India is estimated to generate an annual demand of nearly 23 million ton of corn by 2011-12. According to Vision 2025, released on Thursday by Indian Maize Development Association (IMDA), India's demand for maize is likely to be 22.73 million tons in 2011-12, out of which 19.66 million tons would be for non-food uses like poultry and cattle feed. IMDA also said that total production of maize is estimated to rise to 42 million tons in 2025 from a projected 22 million tons in 2010, if the output increases by 6 to 7 million ton in every five year. India, Asia’s second-largest grower of corn after China, generally sells around two to three million tons of corn a year in global trade of about 90 million tons. Cost Estimation: Capacity : Maize Starch: 69300 MT/Annum Maize Zein/Protein: 5940 MT/Annum Maize Fiber Flour: 7920 MT/Annum Maize Germ: 7920 MT/Annum
Plant capacity: -Plant & machinery: 2531 Lakhs
Working capital: -T.C.I: Cost of project : 4639 Lakhs
Return: 46.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Maize Processing - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Profile Maize is one of the cereal grains which produces throughout India and is placed 3rd position in agricultural base production. The products from maize are value added products which include maize starch, liquid glucose, dextrose monohydrate, anhydrous dextrose, sorbitol, corn gluten to name a few. In India, the prime source of starch is maize and the textile industry is for long the largest buyer of maize starch in India. Maize is constituted by hull, germ, protein, starch and moisture. There is dry and wet milling process of manufacturing of starch, zein, germ and hulls. Starch is the basic constituent of maize and it is converted to liquid glucose by adopting series of digestion steps on starch. It will be basically enzyme and acid digestion system. It may be enzyme - enzyme system or only acid digestion system. In the production of liquid glucose there is some production of dextrose anhydride. Maize (Corn) contains about 70% starch, other components being protein, fibers and fat. Application • Starch can be potentially used in large number of preparations. Its major applications are in textiles and paper manufacture and in food and pharmaceutical industries. Starch is used in the manufacture of number of products such as starch esters, starch phosphates, glucose, dextrose, sorbitol, ethyl alcohol etc. • Main use of corn oil is in cooking, where its high smoke point makes refined corn oil valuable frying oil. It is also a key ingredient in some margarines • Corn starch is used as a thickening agent in soups and liquid-based foods, such as sauces, gravies and custards. • Corn syrup is used in foods to soften texture, add volume, prevent crystallization of sugar, and enhance flavor ? Market Potential India is the fifth largest producer of maize in the world contributing 3% of the global production. In India, maize is grown in all the seasons i.e., kharif, rabi and summer. Of these three seasons, nearly 90% of the production is from kharif season, 7-8% during rabi season and remaining 1-2% during summer season. India produces around 10 million ton of maize. Karnataka is the leading producer of maize in India as it falls under the corn belt of India and produces 15 % of India’s total produce. About 50 % of the total Indian produce is consumed as poultry feed and about 8 % is consumed by the starch industry. Cost Estimation: Capacity : Starch - 5250 MT/Annum Dextrose Monohydrate – 4500 MT/Annum Liquid Glucose - 1125 MT/Annum Oxidised Starch - 562 MT/Annum Hull- By product – 900 MT/Annum Zein- By product – 1800 MT/Annum Germ- By product – 1800 MT/Annum
Plant capacity: -Plant & machinery: 216 Lakh
Working capital: -T.C.I: Cost of the Project : 630 Lakh
Return: 42.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

COLD STORAGE FOR FRUITS & VEGETABLES - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout

Profile A cold storage is a temperature-controlled supply chain network, with storage and distribution activities carried out in a manner such that the temperature of a product is maintained in a specified range, needed to keep it fresh and edible for a much longer period than in normal ambient conditions. This system facilitates long distance transport of various products as well as makes seasonal products available over the entire year. Fruits, vegetables and many other commodities can be preserved by storage at low temperature, which retards the activities of micro organisms. Micro organisms are the spoilage agents and consist of bacteria, yeasts and molds. Low temperature does not destroy those spoilage agents as does high temperature, but greatly reduces their activities, providing a practical way of preserving perishable foods in their natural state which otherwise is not possible through heating. Living foods such as fruits and vegetables have some natural protection against the activities of micro organism. The best method of preserving these items is to keep the product alive and at the same time retard the natural enzyme activity which will retard the rate of ripening or maturity. Application Cold storage is used to preserve fruits and vegetables. Once they are kept in the cold storage, they do not get spoiled even after many months. Sometimes, in production season of certain vegetable or fruit crops, the demand for those thing decreases, which in turn decreases the consumption in surplus amount of that particular item and it is kept in a cold storage. So this item, when needed, can be taken from the cold storage & can be made available to consumers very easily. Cold storages are essential for extending the shelf life of the products, reducing transport bottlenecks during the peak period of production and maintenance of the quality of produce. The development of cold storage industry has therefore an important role to play in reducing the wastages of the perishable commodities and thus providing remunerative prices to the farmers. Market Currently, India has an estimated share of around 80-85 per cent of the total cold storage capacity. There are over 5,300 cold storages in the country, the bulk of which are operated by small cold storage service providers having less than five cold storages. Potato storage constitutes the largest share of the cold storage capacity, accounting for about 75 percent in volume terms. The remaining capacity consists of multi purpose storage facilities which are used for storing fruits, vegetables, dairy products, meat products and other processed foods.
Plant capacity: 5000 MTPlant & machinery: 320 Lakh
Working capital: -T.C.I: 800 Lakh
Return: 43.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

BEER PLANT - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Among the alcoholic drinks, Beer is quite common and popular in almost every Country of the World. People of different Countries take beer in varying much like a soft drink in European Countries it is just a substitute of water. The alcoholic contents and main source stuff also keep varying according to the tests of the major part of population of the particular country although it is a fashion to ask for beer of every origin in every Country. All the alcoholic drinks beer has become so common, as if were soft drink. Beer in the Western countries is the important constituent of daily food. The most important characteristic of drink is to keep body warm and certain refreshness throughout the body. Beer is the dilute alcoholic product. The properties of the finished beer vary with the type of beer & place of origin. The quality consists of the aroma, taste, appearance, formation and stability of foam. A quantitative expression of the aroma exists in the amount of volatile alcohols, acids, esters and aldehydes but the most important attribute the quality etc. cannot be expressed in this way. Of course, foam formation and foam stability can be evaluated more easily. Beer is drink primarily as a source of liquid and for its pleasant & refreshing taste; non the less, its nutritional properties are of great importance. The calories content of beer is significant but not special high. A 355 ml. bottle of average beer yields approximately 143 Kcal of energy. The normal daily intake is 2400 K cal. The calories are provided by the unfermented, residues and alcohol. Alcohol also replaces Carbohydrates, fats, proteins, so that there may be a gain in body weight. Beer also contributes to mineral requirements of the body and supplies useful quantities of vitamin B complex. Indian Beer Market is the second fastest growing segment after Wine in the Indian alcoholic beverage industry which has registered phenomenal growth of ~% in the last 5 years. Beer market is poised to achieve exceptional growth offering gamut of opportunities. In the near future, many brands and beer varieties will be available in India, offering more choices to consumers. Beer is estimated to overtake IMFL and country liquor and will become the market leader in the long run with the share of ~% in FY’ 2016, albeit by state governments’ future regulations and taxes.
Plant capacity: 96000 Bottles/day Plant & machinery: 2434 Lakh
Working capital: -T.C.I: Cost of Project : 3783 Lakh
Return: 39.91%Break even: 33.86%
Add to Inquiry Add to Inquiry Basket

Hospital - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project,Projected Balance Sheet

A private hospital is a place where one may get treatment from ordinary fever to a major surgery operation. As a matter of fact, no limitation has been made for the facilities available in a hospital. However, generally all private hospitals are provided with latest facilities and ultra modern machines. In a hospital, surgeons, physicians, E.N.T., specialists, children specialist, Eye-surgeon, psychologists and sex-specialist are essential. Presently, every city or town in India has no. of private hospitals furnished with latest medical facilities available and with more qualified surgeons, physicians and specialist doctors. Even sometimes, they are furnished with more modern machines than those available in the nearby Government Hospital. These hospitals can be seen well crowded as they provide very good service at a smile. As they are run by privates very good medical care is provided by them. Development in Healthcare Industry: The Indian healthcare industry is undergoing phenomenal expansion. Private hospitals and continued investment in the public health programmes are driving the boom. Together, this health infrastructure serves a population of over 1 billion, growing at about 2 per cent annually. India’s over 300 million strong middle class, is driving unprecedented demand for quality healthcare. Market Scenario: Based on the health indicators for India released by the WHO, CRISIL Research estimates the Indian healthcare delivery industry to reach Rs 2.3 trillion in 2010-11. As healthcare coverage across the country increases, the industry is expected to register a CAGR of 12 per cent to reach Rs 4.2 trillion in 2015-16. As private investments have been skewed towards in-patient department (IPD) treatments, its share in the overall market is expected to increase from 64 per cent in 2010 to 11 to 66 per cent by 2015 to 16. The growth in demand for healthcare delivery services will be mainly driven by a combination of various factors including changing demographics, increasing income levels, greater health awareness and increasing health insurance coverage. Investments of over Rs 5.6 trillion required to attain healthcare delivery benchmarks. India lags behind several global benchmarks for healthcare delivery. In terms of both healthcare infrastructure and manpower, India ranks below even developing countries like China, Thailand, Sri Lanka and Vietnam in terms of both beds to population and physicians to population ratios. In order to meet the global median of 24 beds per 10,000 population, as per WHO statistics, investments of Rs 5.6 trillion would be required over the next 5 years.
Plant capacity: 100 BEDDED HOSPITAL Plant & machinery: 3889 Lakhs
Working capital: -T.C.I: 5275 Lakhs
Return: 19.04%Break even: 57.99%
Add to Inquiry Add to Inquiry Basket

IV (intravenous) Fluids [Form Fill Seal (FFS) Technology] - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Plant Layout

Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through the circulatory system. These fluids must be sterile to protect patients from injury, and there are a number of different types available for use. Many companies manufacture packaged intravenous fluids, as well as products which can be mixed with sterile water to prepare a solution for intravenous administration. Fluids are given when someones body fluid volume falls. There are a number of things which can cause a drop in fluid volume. Vomiting and diarrhea are a classic example, which is why people are encouraged to drink fluids when they are sick, to keep their fluid volume stable. Another cause is blood loss, which causes problems both because people lose blood products, and because they experience a loss in fluid volume. Electrolyte levels in the blood can also become unstable as a result of rapid changes in fluid volume, in which case intravenous fluids can be used to restore the balance. Uses and Application There are four main ranges of application of highly specialized intravenous infusion solutions: Aqueous isotonic injection (5%) of dextrose is given as intravenous injections to increase the column of circulating blood in the shocks and haemarrhages and to counteract dehydration. When it is desired to replace excessive salt loss also glucose is injected along with sodium chloride, Dextrose solution is used during postoperative period when sodium extraction is reduced, Dextrose solution with concentration of 10 to 15% are used as diuretic for increase in urine flow, Dextrose solution of 5% normal salinic are used for restoring fluid volume in circulation of an emergency as in accidents with haemarrhage. Market Survey Indias traditions in the science of health and healing go back to the halcyon days of Surushta, Vagbhatta and Charaka. Our system of medicine like Ayurveda was well established and schools and hospitals with treatises and instruction manuals were in wide use. I.V. fluid demand is normally linked to the number of hospital beds. Observations show that 18 bottles of I.V. fluids are consumed per bed per month in the country. The demand is estimated to increase at a rate of 9 to 12% per annum. The growth of I.V fluid manufacturing was faster than the growth rate of drugs. I.V fluids are the solutions applied directly to the vein of a patient who suffer from the weaknesses due to the deficiency of body fluids. These I.V. fluids are the best alternative, which can yield sudden result in the health of a patient by replenishing the body fluids.
Plant capacity: 9000000 Nos. Bottles/ Annum(Each 1000 ml. Bottles)Plant & machinery: 851 Lakhs
Working capital: -T.C.I: Cost of Project : 1251 Lakhs
Return: 43.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Transmission Towers & Tele Communication Towers With Galvanizing Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

A transmission tower (colloquially termed an electricity pylon in the United Kingdom and parts of Europe, an ironman in Australia, and a hydro tower in English Canada) is a tall structure, usually a steel lattice tower, used to support an overhead power line. They are used in high-voltage AC and DC systems, and come in a wide variety of shapes and sizes. Typical height ranges from 15 to 55 metres (49 to 180 ft), though the tallest are the 370 m (1,214 ft) towers of a 2700 metres long span of Zhoushan Island Overhead Powerline Tie. In addition to steel, other materials may be used, including concrete and wood. Uses & Applications The products of the Proposed Fabrication units are covered by Well designed and fabricated structures for a. state electricity boards for the purposes of electricity supply (i,e) a) power transmission Towers, TV and Radio Towers, Telecommunication Towers, b) Railway and Highway bridges etc. c. Industrial structures etc. Four major functions of transmission towers are in use: Suspension Towers, Terminal Tower, Tension Towers & Transposition Tower. Market Survey The Indian market has also the potential to generate 150,000 MW of hydro power. The Vadodara facility received fresh investments of about USD 30 mn with a scalable manufacturing capacity that currently stands at 1500 MW per annum. The Vadodara facility is one of the three largest hydro equipments facilities in the world. With the fast development of cellular telephones, a completely new segment of tower industry has emerged. The demand has increased precipitately in sympathy with the galloping expansion of cellular telephones.
Plant capacity: 24000 Mt/ Annum Plant & machinery: 163 Lakhs
Working capital: -T.C.I: Cost of Project : 833 Lakhs
Return: 45.00%Break even: 43.00%
Add to Inquiry Add to Inquiry Basket

CEMENT PLANT - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Cement is a material with adhesive and cohesive properties which make it capable of bonding minerals fragments into a compact whole. It can be defined as any substance, which can join unite two or more pieces of some other substance together to form a unit mass. Cement, as used in construction industries, is a fine powder which when mixed with water and allowed to set and harden can join different components or members together to give a mechanically strong structure. Thus cement can be used as bonding material for bricks or for bonding solid particles of different sizes (rubber masonry) to form a monolith. The name Portland cement is given originally due to the resemblance of the color and quality of the hardened cement to Portland stone Portland Island in England. The most common type of cement used by concrete manufacturers is Portland cement, which is prepared by igniting a mixture of raw materials mainly composed of calcium carbonate or aluminium silicates. According to ASTM standard specification C 150, Portland cement is defined as a hydraulic cement produced by pulverizing clinker consisting essentially of hydraulic calcium silicates, usually containing one or more of the forms of calcium sulfate as an inter ground addition . The phase compositions in Portland cement are shown below and they are denoted as tri calcium silicate (C3S), di calcium silicate (C2S), tri calcium aluminate (C3A), and tetra calcium alumino ferrite (C4AF) Uses & Applications The most common use for cement is in the production of concrete. Concrete is a composite material consisting of aggregate (gravel and sand), cement, and water. As a construction material, concrete can be cast in almost any shape desired, and once hardened, can become a structural (load bearing) element. Users may be involved in the factory production of pre cast units, such as panels, beams, road furniture, or may make cast in situ concrete such as building superstructures, roads, dams. Market Survey Indian cement industry, a leading manufacturing sub-sector in India, entered a new era after the partial decontrol in 1982 and near total free market in 1989, ahead of the dawn of the liberalisation era in the country. The industry was totally delicensed in 1991 under the Industries Development and Regulation Act. India is the second largest producer of cement in the world after China. It is followed by Japan and the USA. The overall turnover of the industry is placed at Rs 600 bn. India accounts for a share of about 6% against China's 37% and the USA's 5% of global production. The demand for cement mainly depends on the level of development and the rate of growth of the economy. There are no close substitutes for cement and hence the demand for cement is price inelastic.
Plant capacity: 6000 MT/AnnumPlant & machinery: 777 Lakhs
Working capital: -T.C.I: Cost of Project : 1253 Lakhs
Return: 48.00%Break even: 39.00%
Add to Inquiry Add to Inquiry Basket

DISPOSABLE PLASTIC SYRINGES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A syringe is a simple piston pump consisting of a plunger that fits tightly in a tube. The plunger can be pulled and pushed along inside a cylindrical tube (the barrel), allowing the syringe to take in and expel a liquid or gas through an orifice at the open end of the tube. The open end of the syringe may be fitted with a hypodermic needle, a nozzle, or tubing to help direct the flow into and out of the barrel. The disposable plastic syringe has become an important part of the medical scene since its introduction in the late 1950's. Today more and more attention is being focused on the composition and configuration of this everyday item. It is an instrument which is used for injecting any liquid into the body of human beings or of animals. These syringes are used for injecting the medicine into the body or into the nerve of the body which are not possible to take in through mouth or takes much time in mixing with blood. Disposable Syringes made of plastic Material have been successfully used in medical and pharmaceutical practice for many years. The constantly increasing use of this type Syringe indicates its importance, which is based mainly on the advantages it offers regarding cost and hygienic applications. Plastic syringes are becoming more popular in the medical world due to its lower cost and higher accuracy. Uses & Applications Disposable syringes commonly are used in modern medicine for the injection of drugs and vaccines or for the extraction of blood. The often are used instead of reusable syringes in an effort to avoid spreading a disease. Among the common uses of disposable syringes are the injecting of insulin by a diabetic person and the administering of a local anesthesia by a dentist. A medical syringe that is used to give shots to more than one person without being properly sterilized is a potential source of disease. This can be an especially pressing concern in poor or undeveloped areas, where an injection often cannot be given under ideal medical conditions. Therefore, disposable syringes often are favored over reusable syringes for vaccines, in order to avoid the risk of transmitting blood borne diseases such as human immunodeficiency virus (HIV) and hepatitis from one person to another. Needle exchange programs that provide intravenous drug users with disposable syringes and needles are based on the same idea, because reuse and sharing of infected needles by drug users is one of the principal ways HIV is transmitted in the developed world. Market Survey Needles and syringes are amongst the most extensively used medical disposables. Healthcare professionals represent the largest end use market for syringes, followed by diabetics. A substantial rise in the number of drug addicts has also contributed to the enhanced demand for syringes across the world. Rising life expectancies and growing proportion of the elderly have led to increased demand for healthcare services, and greater need for drugs to be injected. Additionally, a number of newly introduced drugs including DNA based drugs are not available in the form of pills and must be administered intravenously, thereby enhancing the demand for disposable syringes. Worldwide market for syringes is driven by an aging population and related rise in healthcare demand. The Present demand of Disposable syringes is being adequately met by indigenous production. In increasing awareness in health care, AIDs and like diseases and improvement in per capita income is expected to create further growth in demand of disposable syringe / needles. Since there is in need to add few more new units for manufacturing of Disposable Syringe. The growth in domestic demand may be conservatively expected to be 25% per annum, assuming constant export of 100 million syringes /year only. One additional unit every year with 25 million products shall be needed to increase in indigenous demand alone besides increase in export quantities is likely to be the further aggravate the demand. The Industry is exporting about 80 million syringes annually which is reasonably spread amongst various units. The measure importing country is Russia. (For sustained exports on durable basis, accreditation under ISO: 14000 or ISP 9000 is mandatory. Imports are limited to certain sizes like 10.20 and 50 ml because of relatively uneconomical demand quantities in such sizes. The total imported in all size may be 35 40 million pieces. Few Indian Major Players are as Under: Albert David Ltd. Disposable Medi Aids Ltd. H L L Lifecare Ltd. Hindustan Syringes & Medical Devices Ltd. Iscon Surgicals Ltd. La Medical Devices Ltd. Lifeline Injects Ltd. Lifelong Meditech Ltd. Nirma Ltd. Raaj Medisafe India Ltd. Sangam Health Care Products Ltd. Surgiplast Ltd.
Plant capacity: 16800 Nos. Syringes (2.5 ml size/day),16800 Nos. Syringes/ (5 ml size/day)Plant & machinery: 104 Lakhs
Working capital: -T.C.I: Cost of Project : 255 Lakhs
Return: 26.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

INDIAN MADE FOREIGN LIQUOR (EXTRA NEUTRAL ALCOHOL) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunity

The history of distilled spirit goes back into antiquity. Science have unearthed pottery in Mesopotamia depicting fermentation scenes dating back to 4200 B.C. a small wooden model of a brewery from about 2000 B.C. is on display at the Metropolitan Museum of Art in Newyork city & Aristotle mentions a wine which produces a spirit. The first real distiller was probably a green Egyptian alchemist who in the first second century AD, in an attempt to transmute base metal into gold, boiled some wine in a crude still. The discovery of ardent spirits which remelted from this effort was looked upon with awe. It was kept a secret for centuries. The technique of distillation probably came from the Egyptians who had been interested in alchemy since the Precbristian ere. At a later time the Arabians gained this knowledge from the Egyptians. Distillation was introduced into Western Europe either through spain about 1150 AD, or by the crusaders who learned about it from the Moolems in the 12th & 13th centuries. Distilled spirits were probably known in Ireland & scotland before 12th Century, but actually it was not until then that there is a recorded history of distilled history in Europe. In India production of alcohol apart from molasses & sugarcane route the non molasses route like maize, starch, corn grain, sweet sorghum, tapioca, sugar beet are also equally getting importance as the climatic conditions for such type of agricultural crops suits in India. It is a right time for the central government through ministry of agriculture to encourage and assist state governments to introduce a policy of using only grain based alcohol for potable purpose. Molasses based alcohol may be used for industrial use as well as fuel blending. Uses & Applications Extra neutral alcohol is mainly used to make a very high quality potable alcohol used by liquor industries for the production of branded alcoholic drinks. (eg. canes, vodkas, gins, rums, liqueurs and aperitifs). Ethanol (Ethyl Alcohol or Grain Alcohol) is commonly used in alcohol. Market Survey The IMFL and beer sector is the most visible part of the alcohol industry, boasting a few large companies with multiple production units and nationwide marketing networks. These companies control much of the market, have been present in India for several decades, and have established several brand names regionally or nationally. These companies aggressively advertise and promote their brands and their corporate identities, and constantly monitor and protect their products market shares. They are also cash rich, since profit margins are high in this industry. India ranks as one of largest alcoholic beverage markets across the globe, considering that almost 70 per cent of alcohol in South East Asia is produced in India. Indias share of total alcohol beverage imports in the region is nearly 10 per cent. India's alcoholic beverages market, comprising beer, wine and spirits, will cross the Rs 1.4 lakh crore mark in 2015, compared to the current size of about Rs 50,700 crore, says an industry specific analysis of the Associated Chambers of Commerce and Industry of India (Assocham). China is the largest global spirits market.China and India are the two fastest growing markets for spirits. India is expected to overtake Russia as the second largest spirits market by 2013. The United States is predicted to be the third fastest growing spirits market through 2015. The US market has shown a gradual recovery in 2010 and 2011, with spirits volume up 2% in 2010 and a steady return to premium spirits. Vodka showed a strong and production methods dictated by the country of origin. Strong vodka growth in the US and emerging countries such as India are expected to keep vodka in the number one position in the coming years. Few Indian Major Players are as Under: Allied Blenders & Distillers Pvt. Ltd. Amber Distilleries Ltd. Amrut Distilleries Ltd. Arlem Breweries Ltd. [Merged] Arthos Breweries Ltd. Associated Breweries & Distilleries Ltd. [Merged] Aurangabad Breweries Ltd. B D A Breweries & Distilleries Ltd. B D A Pvt. Ltd. Bacardi India Pvt. Ltd. Balaji Distilleries Ltd. [Merged] Balbir Distilleries Ltd. [Merged] Baramati Grape Inds. Ltd. [Merged] Beam Global Spirits & Wine (India) Pvt. Ltd. Blossom Industries Ltd. Buckingham Distilleries & Breweries Ltd. [Merged] Castle Breweries Ltd. Central Distillery & Breweries Ltd. [Merged] Charminar Breweries Ltd. [Merged] Charosa Wineries Ltd. Cobra Indian Beer Pvt. Ltd. Devans Modern Breweries Ltd. Doburg Lager Breweries Ltd. [Erstwhile] East Coast Breweries & Distilleries Ltd. [Merged] Empee Distilleries Ltd. Foster'S India Ltd. Four Seasons Wines Ltd. Glasgow Distilleries Ltd. Grover Vineyards Ltd. Haryana Breweries Ltd. [Merged] High Range Breweries Ltd. [Merged] Hindustan Breweries & Bottling Ltd. Hyderabad Distilleries & Wineries Ltd. Impala Distillery & Brewery Ltd. Indage Vintners Ltd. Indo Lowenbrau Breweries Ltd. [Merged] Interlink Exports Ltd. Jagatjit Industries Ltd. John Distilleries Ltd. Jubilee Beverages Ltd. Kalyani Breweries Ltd. [Merged] Kedia Distilleries Ltd. Kerala Alcoholic Products Ltd. Kerala Distilleries & Allied Products Ltd. [Merged] Kesarval Beverages Ltd. [Merged] Khemani Distilleries Pvt. Ltd. Kool Breweries Ltd. Lilasons Breweries Ltd. Lilasons Industries Ltd. Malabar Breweries Ltd. [Merged] Mangalore Breweries & Distilleries Ltd. [Merged] Mcdowell & Co. Ltd. [Merged] Mehra Beverages Ltd. [Merged] Millennium Beer Inds. Ltd. [Merged] Mohan Breweries & Distilleries Ltd. Mohan Meakin Ltd. Mohan Rocky Springwater Breweries Ltd. Mount Shivalik Breweries Ltd. Mount Shivalik Inds. Ltd. Mysore Breweries Ltd. [Merged] Mysore Wine Products Ltd. [Merged] Pals Distilleries Ltd. Pernod Ricard India Pvt. Ltd. Piccadily Sugar & Allied Inds. Ltd. Pincon Spirit Ltd. Prag Distillery Pvt. Ltd. Premier Breweries Ltd. [Merged] Punjab Breweries Ltd. [Merged] Radico Khaitan Ltd. Rainbow Breweries Ltd. Rairu Distilleries Ltd. Raj Breweries Ltd. [Merged] Rajasthan Breweries Ltd. Ravikumar Distilleries Ltd. Rochees Breweries Ltd. [Merged] Salamander Distillers Ltd. [Merged] Seagram Distilleries Pvt. Ltd. Shaw Wallace & Co. Ltd. [Merged] Shaw Wallace Distilleries Limited [Merged] Shaw Wallace Distilleries Ltd. [Merged] Shiva Distilleries Ltd. Sica Breweries Ltd. [Merged] Silver Oak (India) Ltd. Skol Breweries Ltd. Skol Breweries Ltd. [Merged] Som Distilleries & Breweries Ltd. Southern Agrifurane Inds. Ltd. Southern Agrifurane Inds. Ltd. [Merged] Tilaknagar Distilleries & Inds. Ltd. [Merged] Tilaknagar Industries Ltd. Travancore Sugars & Chemicals Ltd. Tripti Alcobrew Ltd. United Breweries Ltd. Utkal Distilleries Ltd. V R V Breweries & Bottling Inds. Ltd. [Merged] Vinayak Distilleries Ltd. Vinedale Distilleries Ltd. Vitari Distilleries Ltd. [Merged] Winsome Breweries Ltd. Xylon Loquitur Distillers & Vintners Ltd.
Plant capacity: 80000 Bottles (750 ml Size) & IMFL/dayPlant & machinery: 2464 Lakhs
Working capital: -T.C.I: Cost of Project : 3873 Lakhs
Return: 29.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 17 of 175 | Total 1741 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 174 175   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top