Google Search

Search

Already a Member ?

Best Business Opportunities in Telangana- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Telangana is a state in the Southern region of India. It has an area of 114,840 km2 and is the twelfth largest state in India. Most of it was part of the princely state of Hyderabad, ruled by the Nizam of Hyderabad during the British Raj, joining the Union of India in 1948. Telangana was separated from Andhra Pradesh as a new 29th state of India, with the city of Hyderabad as its capital. Hyderabad will continue to serve as the joint capital city for Andhra Pradesh and Telangana for a period of not more than ten years. Telangana is situated on the Deccan Plateau, in the central stretch of the eastern seaboard of the Indian Peninsula. It covers 114,800 square kilometers (44,300 sq. mi). The region is drained by two major rivers, with about 79% of the Godavari River catchment area and about 69% of the Krishna River catchment area, but most of the land is arid. Telangana region has rich natural resources. About 45 per cent of the forest area in Andhra Pradesh state is in Telangana region while 20 per cent of the country's coal deposits in the country are also found here. Telangana is also rich in limestone deposits that cater to cement factories. Telangana has other mineral resources like bauxite and mica. Perennial rivers Godavari and Krishna enter Andhra Pradesh in Telangana before flowing down through other regions and ending up in the Bay of Bengal. Telangana region is sitting on potential oil and natural gas reserves, according to a report by Director General of Hydrocarbons (DGH). Telangana has a significant amount of Software export in India. While majority of the Industry is concentrated over Hyderabad, the other cities are also becoming significant IT destinations in the state. Hyderabad's IT exports exceeded $7 billion in 2014.There have been extensive investments in digital infrastructure.

 

AGRICULTURE

Rice is the major food crop and staple food of the state. Other important crops are tobacco, mango, cotton and sugar cane. Agriculture has been the chief source of income for the state's economy. Important rivers of India are the Godavari, Krishna flow through the state, providing irrigation. Telangana agriculture department separated from Andhra Pradesh as part of Andhra Pradesh bifurcation It aims promote agricultural trade and to boost up the agricultural production and productivity in the Telangana.

 

TOURISM IN TELANGANA

Telangana State Tourism Development Corporation (TSTDC) is a state government agency which promotes Tourism in Telangana. Telangana has a variety of tourist attractions including historical places, monuments, forts, water falls, forests and temples. Charminar, Golconda Fort, QutbShahi Tombs, Chowmahalla Palace, Falaknuma Palace and Bhongir Fort, are some of the monuments in the state. The Charminar, built in 1591 CE, is a monument and mosque located in Hyderabad, Telangana, India.

 

DEMOGRAPHIC PROFILE

Telangana with a population of 351.9 lakhs (according to the 2011 census) accounts for about 3.6% percent of the total population of India. Out of this, 177.0 lakhs (50.2%) are males and 174.9 lakhs (49.8%) are females. The sex ratio of the state is 988 as against the national figure of 943. The population density in the state is 307 persons/Sq.Km. In 2012-13, the services sector at Rs.  1, 14,046 crores, contributed 58.1% to the GSDP (at constant prices). It is followed by industry sector, contributing 27.9% (Rs. 54,687 crores) and the agriculture sector’s contribution of 14% (Rs. 27,450 crores). The services sector had fastest growth  of  11.31%  followed  by  industry  sector  (10.04%)  and  agriculture  sector  (6.89%) between 2004-05 and 2012-13.

The Telangana government has proposed to add 230 crore plants in the next three years under a flagship programme which envisages boosting of tree cover in the state by nearly 8%.

 

FOOD AND INDUSTRIAL PROCESSING SECTOR

The Telangana government plans to put greater emphasis on value-addition in the farm sector in its industrial policy. The departments of industry and commerce, agriculture and agro marketing would coordinate together to achieve value maximization for farmers. The government is also keen on encouraging e-marketing activities, which involves networking all agriculture mandis in the state so that farmers get access to prevailing prices across important markets and thereby helping them unlock the right value for their produce. The state in collaboration with research institutes in the country would facilitate an ideal adoption of latest practices ranging from seed technology and farm machinery to improve farm productivity. the state government is also considering specific projects such as setting up a pharmaceutical city near Hyderabad and a cotton hub in Warangal district, the largest producer of long-staple cotton. The Telangana government has begun a survey to identify land that can be offered to new industries in the state. The Telangana government is set to announce its new industrial policy under which scheduled castes and scheduled tribe entrepreneurs would be specially encouraged.

Telangana Government is mulling to set up a 'Pharma City' near the state capital in about 8,000 acres. The City will include industries as well as residential colony, and a power plant with 500 MW capacity will be set up adjacent to the pharma city to provide captive, dedicated and uninterrupted power supply to the industry. The pharma city is expected to accommodate about five lakh employees besides their families in the residential colony touching about twenty lakh over a period. Delegation of Drugs Manufacturers' Association that an international consultancy organisation with expertise in developing in the information technology and pharmaceuticals manufacturing sectors may become backbone of Telangana economy, leaving power production, ports and oil and natural gas to play a pivotal role in driving prosperity in the residuary state. Industrial estates should be contacted to design the pharma city. Telangana's per capita income of Rs 24,409 in 2004-05 has phenomenally grown to a whopping Rs 83,020. While Hyderabad has less number of households using open toilets at 0.9 per cent, Mahabubnagar is at 71.1 per cent. The land-locked state is expected to have nearly Rs 4,000 crore surplus budget, but lingering power deficit may force the new government to spend more on the power purchase. Telangana, spread in 1,14,840 square kilometres, has 66.46 per cent literacy rate with a population of 3.52 crore.

 

ECONOMY OF TELAGANA

The Economy of Telangana is mainly driven by agriculture. Two important rivers of India, the Godavari and Krishna, flow through the state, providing irrigation. Rice, cotton, mango and tobacco are the local crops. Recently, crops used for vegetable oil production such as sunflower and peanuts have gained favour. There are many multi-state irrigation projects in development, including Godavari River Basin Irrigation Projects and NagarjunaSagar Dam, the world's highest masonry dam. Telangana is a mineral-rich state, with coal reserves at SingaerniColleries. The population of Telangana is over 35 million now – much more than 30 million for the whole of Andhra Pradesh, including Telangana, at the time of its formation in 1956. The demands on governance have multiplied over this half a century. Apart from commitment to the development of the region, a smaller state being more easily accessible to the common people can intelligently and speedily grapple with their problems.

 

INDUSTRIAL POLICY FRAMEWORK FOR STATE OF TELANGANA

Industrialization will be the key strategy followed for economic growth and development for Telangana, the 29th state of the country. People of the new state have very high expectations from the Telangana State Government for creating jobs for the youth, promote development of backward areas, maximize growth opportunities by optimum utilization of the available resources, harness the talents and skills of the people etc. The Government of Telangana State realizes that industrial development requires large-scale private sector participation, with the government playing the role of a facilitator and a catalyst. The government is committed to provide a graft-free, hassle-free environment in which the entrepreneurial spirit of local, domestic and international investors will thrive to take up their industrial units in the state of Telangana as the preferred investment destination.

The new Telangana State Industrial Policy will be rooted in certain core values, as follows:

 

                • The Government regulatory framework shall facilitate industrial growth

                • Entrepreneurs will thrive in a peaceful, secure and progressive business regulatory                                        environment

                • Industrial development will lead to massive creation of jobs benefitting local youth

                • Industrialization shall be inclusive and facilitate social equality

 

The new Telangana State Industrial Policy will strive to provide a framework which will not only stabilize and make existing industries more competitive, but also attract and realize new international and national investments in the industrial sector. It is expected that the most significant outcome of this approach will be the production of high quality goods at the most competitive price, which establishes “Made in Telangana-Made in India” as a brand with high global recognition. The Industrial Policy Framework has the following mandate for departments that have any responsibility in the industrialization of the State—Minimum Inspection and Maximum Facilitation.

The Government of Telangana State is determined to create an ecosystem in which the ease of doing business in the state matches and even exceeds the best global standards. Telangana State Government is aware that offering a hassle-free system is considered to be of the highest priority by the industrialists, and accordingly the government will implement a very effective industrial clearance system that will go beyond the traditional single window system.

 

THRUST AREAS AND CORE SECTORS

•             Life Sciences including, bulk drugs, formulations, vaccines, nutraceuticals, biological,   incubation centers, R&D facilities and medical equipment.

•             IT Hardware including bio-medical devices, electronics, cellular communications.

•             Precision engineering, including aviation, aerospace, defence.

•             Food processing and nutrition products including dairy, poultry, meat and fisheries.

•             Automobiles, Transport Vehicles, Auto-components, Tractors and Farm Equipment.

•             Textiles and Apparel, Leather and leather value added products like shoes, purses, bags,         artificial   material infused and coated textiles, paper and paper products.

•             Plastics and Polymers, Chemicals and Petro-chemical, glass and ceramics.

•             FMCG and Domestic Appliances.

•             Engineering and Capital Goods, including castings, foundry and Ferro-alloys and other    metallurgical industries.

•             Waste Management and Green Technologies.

•             Renewable Energy and Solar Parks.

•             Mineral-based and wood-based Industries.

•             Transportation/Logistic Hub/Inland Port/Container Depot.

 

Telangana has emerged as a State that provides that right climate for the growth of IT business and is now one of the most preferred destinations in the Country.

The State of Telangana is poised towards creating a benchmark in Information & Communication Technology (ICT) endowed with a high quality state-of-the-art physical & communication infrastructure of international standards, harnessed human resources, and proactive business friendly policies of the Government.

It is estimated that about 20 lakh acres of land is available in the state that has been identified as unfit for cultivation in Telangana. Based on a detailed survey of these land parcels and identification of those parcels that are fit for industrial use, an industrial land bank for the State of Telangana will be developed.

The development of industrial and related infrastructure will be the responsibility of the Telangana State Industrial Infrastructure Corporation (TSIIC). The financial base of the TSIIC will be strengthened and it will be made to function as an effective organization. All lands in the State identified as fit for industrial use will be transferred to the TSIIC.

To support industrialization, the Government of Telangana will earmark 10% of water from all existing and new irrigation sources for industrial use. Water pipelines will be laid as a part of infrastructure creation for each industrial park by TSIIC. The Government of Telangana State recognizes that quality power and uninterrupted power supply are keys to the growth of the industrial sector. The State has a clear short-, medium-, and long-term plans to first overcome the power shortage and eventually become a power surplus state. Accordingly, uninterrupted power supply will be arranged in each industrial park. The Telangana State Government will encourage usage of non-conventional energy for industrial purposes.

The Telangana State Government is committed to encourage the process of industrialization by making various kinds of incentives available to the entrepreneurs. The Telangana State Government also assures an entrepreneur-friendly and graft-free regime of disbursing the incentives. The Telangana State Government will consider providing incentives to the entrepreneurs in the following areas-

•             Stamp duty reimbursement

•             Land conversion cost

•             Investment subsidy

•             VAT reimbursement

•             Interest subsidy

•             Clean production measures

•             Reimbursement of infrastructure development costs etc.

A sound industrial policy has to ensure that the state taxation structure is conducive to industrial growth and state financial resource augmentation. Distortions in the tax structure leads to evasion of taxes and clandestine transport of industrial inputs and outputs to neighbouring states, which may have advantageous tax rates. The presence of important national and state highways, coupled with the availability of resources and opportunities, provides a great potential for development of industrial corridors in the state along these roadways.

The Industrial Corridors that will be developed initially will be:

 

1) Hyderabad-Warangal Industrial Corridor

2) Hyderabad-Nagpur Industrial Corridor

3) Hyderabad-Bengaluru Industrial Corridor

The new Industrial Policy brought out by the Government of Telangana promises to revolutionise the way industrial sector has been viewed by successive governments in this country. A day is not far when the new Industrial Policy of Telangana will shine as an exemplar among the best in the world.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 15 of 237 | Total 2366 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 236 237   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

MEDICAL COLLEGE WITH HOSPITAL - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

The growth of medical education institutions especially in the private sector in India shows that the rapid growth in the number of medical colleges in India since 1950 has been driven largely by developments in the private sector. The private sector, currently accounting for over 45% of medical colleges in India, grew by 900% between 1970 and 2004, with the bulk of this growth occurring in the richer states. The growth of the private medical education sector over the last 6 decades is the most dominant feature of the Indian medical education landscape. The demand for medical professionals is tremendously increasing with the unfortunate upsurge of diseases and ailments day by day. At the same time super specialty hospitals are coming up both within the country and abroad offering employment opportunities. These along with liberalization of economy could bring better opportunities for these professionals in terms of remuneration, research and working facilities. Health care undoubtedly is one of the pillars of social sector reforms in India. Ensuring right to food, health and education to all citizens has been the prime objective of our government since independence. Good health implies ensuring right to life which is universally acclaimed fundamental human right under the 1948 Human Rights Declaration of the United Nations. The health care industry in the country, which comprises hospital and allied sectors, is projected to grow 23 per cent per annum to touch US$ 77 billion by 2012 from the current estimated size of US$ 35 billion, according to a Yes Bank and an industry body report published in November 2009. The sector has registered a growth of 9.3 per cent between 2000 to 2009, comparable to the sectoral growth rate of other emerging economies such as China, Brazil and Mexico. According to the report, the growth in the sector would be driven by health care facilities, private and public sectors, medical diagnostic and path labs and the medical insurance sector. Hospitals in India have a very bright future. India is the largest democracy in the world, is one of the fastest growing economies that is projected to more than double in the next five years. New entrepreneurs should venture into this field.
Plant capacity: 100 Student in College,500 Beds in HospitalPlant & machinery: -
Working capital: -T.C.I: 7958 Lakhs
Return: 55.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

GOOD FUTURE PROSPECTS FOR MAIZE PROCESSING & ITS ALLIED PRODUCTS (STARCH, LIQUID GLUCOSE, DEXTROSE MONOHYDRATE, DEXTROSE ANYHDROUS, SORBITOL AND VITAMIN C)

Maize (Zea mays L) is one of the most important cereals of the world and provides more human food than any other cereal. Starch is a group of polysaccharides, composed of glucopyranose units joined together by glucosidric linkages. It conforms to the molecular formula, (C6 H10O5)n, where n varies from a few hundred to over one million. Starch is found as the reserve carbohydrate in various parts of plants and is enzymatically broken down to glucose to other carbohydrates according to the metabolic needs of the plants. Industrially, starch is broadly divided into two types viz., natural and modified. Natural starches also designated as unmodified starches or simply starches, are obtained from grains such as sorghum. Starch is also obtained from roots like potato, tapioca and arrowroot, and from the pith of the stems of certain palms such as sago. They are further classified into cereal starches and root starches. The characteristics of the natural starches are changed by chemical or enzymatic action and the products of these reactions are termed modified starches. This group includes dextrins, acid-modified starches, oxidized starches, starch esters, starch ethers, dialdehyde starches, and cationic starches. The roots of tapioca plant (manihot utilissima) forms one of the major sources of starch, ranking next to potato. The starch content of the plant varies between 12 and 33 per cent. The cereal starches, such as maize, wheat, rice and sorghum, are recovered by several processes, of which the wet milling is by far the most important. Starch is an absorbent for water. Starch and Glucose can be used in different end use industries such as in the manufacture of adhesives, sizing and finishing in textiles, thickening agents in gravies, custards, and confectioneries. Sizing papers, Cosmetics, explosives, reagent, face powders, indicators in domestic analysis, water soluble packaging films, book bindings fabrics, distilled liquors, malt sugar, cattle feed ingredient, rubber reinforcing resins etc. Starch in India is mainly used for cotton textile industry, paper and paper products, Biscuits and confectioneries and glucose and dextrose. Commercially glucose is produced from starch only and these two products are generally made in the same unit side by side. One tonnes of glucose needs 1.1 tonne of starch. About 90% of the liquid glucose produced in India is consumed by the confectionery industry. Liquid Glucose and Dextrose are the products of same origin, in liquid form and the late in powder form. Glucose powder (dextrose) is used an invalid food for pharmaceutical purposes. Aqueous isotonic solution (5%) of dextrose is given as intravenous infections to increase the volume of circulating blood shocks and hemorrhage and to counteract dehydration. Vitamin C is a strong monobasic acid and it is used as a powerful reducing agent in neutral and acidic solutions. It is also used medicine. It is an excellent nutritional agent. It is an antioxidant and a preservative in foodstuffs. It is used as a reducing agent in analytical chemistry. The ferric and calcium salts are available for biochemical research. It is also available as the sodium salt. Sorbitol is an organic chemical having varied end uses. It is edible non-crystalline, odorless white powder and having sweet cooling taste. It is highly soluble in water, and slightly in methyl alcohol. In the case of India, starch is being produced from Maize and tapioca. The units producing starch from maize are concentrated in large sector; and the units producing starch from tapioca are largely concentrated in the small-scale sector. There are many units as at present in the country producing starch from Maize and three units producing starch from Tapioca in the organized sector. The capacity for starch from Maize accounts for more than 80 per cent of the installed capacity in the organized sector. As against the organized sector, there are a number of units in the small and cottage sector producing starch mainly from tapioca. As regards glucose it is produced in solid as well as liquid form. The production of glucose is not possible in the small sector and therefore its production is not as widely spread as that of starch. Eight units manufacturing starch in the organized sector also produce liquid glucose simultaneously. The demand for liquid glucose depends mainly upon the growth of medicine, the pharmaceuticals, biscuits and confectionery industries. As such 80% of the total demand for liquid glucose is absorbed by drugs and pharmaceuticals, while only 20% is used in Biscuits, Confectioneries, toothpaste etc. There is a very good scope and ample space in this sector and new entrepreneurs should venture into this field. Capacity Maize Starch 30000 MT/Annum Liquid Glucose 600 MT/Annum Dextrose Monohydrate 3900 MT/Annum Dextrose Anhydrous 3000 MT/Annum Sorbitol 17100 MT/Annum Vitamin–C 150000 Kg/Annum
Plant capacity: -Plant & machinery: 780 Lakhs
Working capital: -T.C.I: Cost of Project : 2590 Lakhs
Return: 42.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

7 AMINOCEPHALOSPORANIC ACID (7 ACA) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

7 ACA or 7 Aminocephalosporanic acid is made from Cephalosporin C and is a key intermediate for synthesizing cephalosporin antibiotics, the B lactam antibiotics family. 7 ACA is a starting compound for the production of various semi-synthetic cephalosporins of different generations. These compounds are made by modification of the side chains at positions 3 and 7 of 7-aminocephalosporanic acid (7 ACA). It is used to produce many cepholosporins pharmaceutical bulks, such as cefazolin sodium, cefotaxime sodium, ceftriaxone sodium, cefoperazone sodium, ceftazime sodium, cefuroxime sodium and so on. Originally, the commercial processes were based on solvent extraction. 7 Aminocephalosporanic acid (7 ACA), until recently it has been produced by chemical deacylation of the natural antibiotic cephalosporin C. The disadvantage of this method is multiple steps, low yield, use of various organic solvents and treatment of a lot of toxic waste. Alternatively, 7 ACA can be produced by a simpler and more environmentally sound process using a bio-catalytic method based on DAAO and glutaryl hydrolase for enzymatic deacylation of CPC to 7 ACA. However, few enzymes capable of this direct deacylation have been discovered, probably because of the unusual nature of the D aminoadipyl side chain of cephalosporin C. Enzyme engineering is a fast growing application in the pharmaceutical market. Cephalosporin is defined as any of a group of broad-spectrum derived from species of fungi of the genus Cephalosporium and is related to the penicillins in both structure and mode of action but relatively penicillinase resistant antibiotics. These antibiotics have low toxicity for the host, considering their broad antibacterial spectrum. They have the active nucleus of beta lactam ring which results in a variety of antibacterial and pharmacologic characteristics when modified mainly by substitution at 3 and 7 positions. Their antibacterial activities result from the inhibition of mucopeptide synthesis in the cell wall. They are widely used to treat gonorrhea, meningitis, pneumococcal, staphylococcal and streptococcal infections. The cephalosporin class of antibiotics is usually divided into generations by their antimicrobial properties. Three generations of cephalosporins are recognized and the fourth has been grouped. Each newer generation of cephalosporins has broader range of activity against gram-negative organisms but a narrower range of activity against gram positive organisms than the preceding generation. The newer agents have much longer half-lives resulting in the decrease of dosing frequency. Accordingly, the third-generation cephalosporins can penetrate into tissues well, and thus antibiotic levels are good in various body fluids. The cephalosporins belong to the family of ? lactam antibiotics. These are named after the reactive moiety of the compounds, the ? lactam ring. In CPC, the four membered ? lactam ring is coupled to a six membered dihydrothiazine ring to form the nucleus, 7 aminocephalosporanic acid (7 ACA), and a side chain, ? aminoadipic acid, is coupled via an amide bond to the nucleus. The total world market for cephalosporins was estimated to be approximately 10 billion US$ in 2000, and ? lactam antibiotics in general accounting for over 65% of the world antibiotic market. According to IMS Health, cephalosporins as single preparation and in combination preparations are ranked 10 in the global drug sales in 2003 by an estimated sales of 8.3 billion US$, the highest ranking for any of the anti infectives classes. The size of the Indian pharmaceutical industry is poised to treble over the decade. It is expected to grow from about USD 6.3 billion in 2005 to about USD 20 billion by 2015, registering a CAGR of 12.3% and outperforming the global average of 9% in 2009 to 10. In terms of scale, the Indian pharmaceutical market is the 14th largest in the world but will graduate to the top 10 by 2015, overtaking Brazil, Mexico, South Korea and Turkey. India’s growth to a USD 20 billion market by 2015 indicates that the incremental growth of USD 14 billion over the coming decade is likely to be the third highest in the world. Demand for 7 ACA is principally determined by the market sales scale of downstream products. In terms of developing trend, ceftriaxone and cefazolin were two mainstream products of 7 ACA. Therefore, the market change in these two products directly affected the change in production-sales relations of 7 ACA. After dosage conversion, according to estimate the use of 7 ACA for making certriaxone accounted for 47.7% of the total consumption of 7 ACA. Obviously, ceftriaxone had become the biggest consumer of cephalosporins raw materials of 7 ACA series, followed by cefazolin. Not only ceftriaxone boosted morale, but cefotaxime, cefazolin sodium, cefoperazone sodium, cefoperazone sulbactam, ceftazidime, cefuroxime, etc were also the direct contributors of the family. At present, major players in the market include Shijiazhuang Pharmaceutical Group Co. Ltd., Fujian Fukang Pharmaceutical Group Co. Ltd., Shanxi Weiqida Pharmaceutical Group Co. Ltd. and Zhuhai United Labs Co. Ltd. At present there is no production of 7 ACA in the country and the demand is met by imports. There is a good scope for capacity creation in India. New entrepreneurs should venture into this sector.
Plant capacity: 150 MT/AnnumPlant & machinery: 1486 Lakhs
Working capital: -T.C.I: Cost of Project : 2167 Lakhs
Return: 64.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

MAIZE & ITS BY-PRODUCTS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Maize is one of the main cereal grains which is produced throughout India and is placed 3rd position in agricultural base production though it is not our staple basic food. Maize is constituted by hull, germ, protein, starch and moisture. Maize is generally processed using the dry and wet milling processes. There is dry and wet milling process for manufacturing of by products such as starch, zein, germ and hulls. Starch is used in the manufacture of number of products such as starch esters, starch phosphates, glucose, dextrose, sorbitol, ethyl alcohol etc. Starch is the basic constituent of maize and it is converted to liquid glucose by adopting series of digestion steps on starch. It will be basically enzyme and acid digestion system. It may be enzyme - enzyme system or only acid digestion system. In the production of liquid glucose there is some production of dextrose anhydride. India is the fifth largest producer of maize in the world contributing 3% of the global production. In India, maize is grown in all seasons i.e., kharif, Rabi and summer. Of these three seasons, nearly 90% of the production is from kharif season, 7 to 8% during Rabi season and remaining 1 to 2% during summer season. Since the maize is rain dependent, it is mainly grown during kharif season. Presently, in India, maize is mainly used for preparation of poultry feed and extraction of starch. Out of total arrivals to the mandis nearly 75% of the produce is bought by the poultry feed manufacturers and 20% is purchased by the starch extractors. The wet milling industry in India is limited to certain pockets such as Gujarat, Maharashtra, Madhya Pradesh, Punjab, Karnataka and Chhattisgarh. There are about 17 wet milling units with a crushing capacity of about 3400 MT of maize/day. Gujarat is the largest producer of starch, having six units with a total crushing capacity of 1350 MT of maize per day, followed by Maharashtra with 5 units and capacity of 1050 MT and Madhya Pradesh with 3 units and capacity of 450 MT maize. There is a good scope to venture into this field for new entrepreneurs. Few Indian Major Players are as under: Anil Products Ltd. Anil Starch Products Ltd. Bharat Starch Inds. Ltd. English Indian Clays Ltd. Gayatri Bioorganics Ltd. Gujarat Ambuja Exports Ltd. Gujarat Ambuja Proteins Ltd. Gulshan Polyols Ltd. Indian Maize & Chemicals Ltd. International Bestfoods Ltd. K G Gluco Biols Ltd. Kamala Sugar Mills Ltd. Karnataka State Agro Corn Products Ltd. Laxmi Starch Ltd. Origin Agrostar Ltd. Pondicherry Agro Service & Inds. Corpn. Ltd. Rai Agro Inds. Ltd. Riddhi Siddhi Gluco Biols Ltd. Santosh Starch Ltd. Santosh Starch Products Ltd. Sayaji Industries Ltd. Sukhjit Starch & Chemicals Ltd. Tirupati Starch & Chemicals Ltd. Unique Sugars Ltd. Universal Starch-Chem Allied Ltd. Wockhardt Health Care Ltd. Cost Estimation: Capacity : 5250 MT/Annum Starch 1125 MT/Annum Liquid Glucose 4500 MT/Annum Dextrose Monohydrous 562 MT/Annum Oxidised Starch 900 MT/Annum Hull 1800 MT/Annum Zien 1050 MT/Annum Germ as by Products
Plant capacity: -Plant & machinery: 179 Lakhs
Working capital: -T.C.I: Cost of Project : 543 Lakhs
Return: 43.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

DISPOSABLE SYRINGES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Disposable needle is widely used by doctors for injection purpose with the help of syringes. With the increase in population in our country, requirement of medicine and injections has increased. For more strength of people more number of needles is required with syringes. Tablets or capsules also play a great role in the life of human beings but injections are also a must to some extent. The disposable syringes market has now self destructing or auto disable (AD) syringe as a safe bet against re use and spread of HIV, hepatitis and other infections. The national immunization policy has adopted the non-reusable, self breaking syringes, though many States are yet to follow suit for the curative injections. Disposable surgical caps and mask are used considerably while performing an operation or undergoing surgical measures. Catheters are used for the purpose of passing urine for bed ridden and emergency patients in hospitals, nursing homes etc. With the development of pharmaceutical industries the use of syringes and disposable needles will also develop. About 70% pharmaceutical industries are in small scale sector. Disposable syringes are becoming more popular in the medical world due to its lower cost and higher accuracy. Plastic can be used in place of metal without any problem. The procedure is also relatively easy and cheaper. New comer can well venture into this field. There is a good scope in this sector. Few Indian Major Players are as under: Company Name Albert David Ltd. Disposable Medi Aids Ltd. H L L Lifecare Ltd. Hindustan Syringes & Medical Devices Ltd. Iscon Surgicals Ltd. La Medical Devices Ltd. Lifeline Injects Ltd. Lifelong Meditech Ltd. Nirma Ltd. Raaj Medisafe India Ltd. Sangam Health Care Products Ltd. Surgiplast Ltd. Transmedica (India) Ltd. Cost Estimation: Capacity : 22500000 Nos./Annum (5ml Size) 22500000 Nos./Annum (10 ml Size)
Plant capacity: -Plant & machinery: 636 Lakhs
Working capital: -T.C.I: Cost of Project : 837 Lakhs
Return: 46.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

MAIZE STARCH - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Starch occurs naturally in the plants and its percentage varies with the plant and also in different parts of the same plant. Corn (maize), sorghum, grain wheat, rice, potato, tapioca, arrow root and sago are among the important sources of natural starches. The grains of barley, rye, oat, and the millets are also employed in the production of starches. Starch is a group of polysacchrides, composed of glucopyranose units joined together by glucosidric linkages. The cereal starches, such as maize wheat, rice and sorghum, are recovered by several processes, of which the wet milling is by far the most important. The principal raw materials, used by the Indian Starch Industry are maize and tapioca. The byproducts of starch during the wet milling process are germ, gluten, cake steep liquor etc. Maize is grown in Uttar Pradesh, Bihar, Rajasthan, Punjab, Madhya Pradesh, Himachal Pradesh, Gujarat, Jammu and Kashmir, Andhra Pradesh, Mysore, and Haryana. Starch is the key ingredient in Food Industry, Pharma Industry, Cattle Feed, Paper and Textile Industry. Starch market is driven mainly by the dynamics in Pharma, Food, Paper and Textile Industries. Apart from the above, starch and starch derivates are increasingly used in manufacture of ethanol to be blended with petroleum products. The continued price rise of crude oil prices in recent years, made the world to look for alternatives and in that process, most of the countries started blending of ethanol with petroleum in the ratio ranging from 5% to 25%. Production of starch and starch derivatives was unable to keep pace with the rising demand in the recent years. The Starch industry in India is thus poised to rapid strides in the coming years. New capacity creation can be thought of as there is a very good scope for new entrepreneurs in this field. Few Indian Major Players are as under: Anil Products Ltd. Anil Starch Products Ltd. Bharat Starch Inds. Ltd. English Indian Clays Ltd. Gayatri Bioorganics Ltd. Gujarat Ambuja Exports Ltd. Gujarat Ambuja Proteins Ltd. Gulshan Polyols Ltd. Indian Maize & Chemicals Ltd. International Bestfoods Ltd. K G Gluco Biols Ltd. Kamala Sugar Mills Ltd. Karnataka State Agro Corn Products Ltd. Laxmi Starch Ltd. Origin Agrostar Ltd. Pondicherry Agro Service & Inds. Corpn. Ltd. Rai Agro Inds. Ltd. Riddhi Siddhi Gluco Biols Ltd. Santosh Starch Ltd. Santosh Starch Products Ltd. Sayaji Industries Ltd. Sukhjit Starch & Chemicals Ltd. Tirupati Starch & Chemicals Ltd. Unique Sugars Ltd. Universal Starch Chem Allied Ltd. Wockhardt Health Care Ltd. Cost Estimation: Capacity : 9300 MT/Annum Maize Starch 1500 MT/Annum by Product Germ 900 MT/Annum Gluten 2400 MT/Annum Husk/Bran 600 MT/Annum Steep Liquer
Plant capacity: -Plant & machinery: 476 Lakhs
Working capital: -T.C.I: Cost of Project : 986 Lakhs
Return: 44.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

STARCH AND ALLIED PRODUCTS FROM MAIZE (Starch, Liquid Glucose, Dextrose Monohydrate, Dextrose Anyhdrous, Sorbitol and Vitamin – C) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey

Starch is a group of polysaccharides, composed of glucopyranose units joined together by glucosidric linkages. It conforms to the molecular formula, (C6 H10O5)n, where n varies from a few hundred to over one million. Starch is found as the reserve carbohydrate in various parts of plants and is enzymatically broken down to glucose to other carbohydrates according to the metabolic needs of the plants. Industrially, starch is broadly divided into two types viz., natural and modified. Natural starches also designated as unmodified starches or simply starches are obtained from grains such as sorghum, from roots like potato, tapioca and arrowroot, and from the pith of the stems of certain palms such as sago. They are further classified into cereal starches and root starches. The characteristics of the natural starches are changed by chemical or enzymatic action and the products of these reactions are termed modified starches. This group includes dextrins, acid-modified starches, oxidized starches, starch esters, starch ethers, dialdehyde starches, and cationic starches. The cereal starches, such as maize, wheat, rice and sorghum, are recovered by several processes, of which the wet milling is by far the most important. Other starches include that of potato & tapioca plant. Physical and chemical properties of starch vary according to the raw material from which it is derived. Starch has many industrial applications in industries like textile, food, paper, pharmaceutical, in the manufacture of glucose and dextrose by hydrolysis, manufacture of modified starches, etc. There are many units as at present in the country producing starch from Maize and three units producing starch from Tapioca in the organized sector. The capacity for starch from Maize accounts for more than 80 per cent of the installed capacity in the organized sector. As against the organized sector, there are a number of units in the small and cottage sector producing starch mainly from tapioca. As regards glucose it is produced in solid as well as liquid form. The production of glucose is not possible in the small sector and therefore its production is not as widely spread as that of starch. Eight units manufacturing starch in the organized sector also produce liquid glucose simultaneously. There are many units as at present in the country producing starch from Maize and three units producing starch from Tapioca in the organized sector. The capacity for starch from Maize accounts for more than 80 per cent of the installed capacity in the organized sector. As against the organized sector, there are a number of units in the small and cottage sector producing starch mainly from tapioca. As regards glucose it is produced in solid as well as liquid form. The production of glucose is not possible in the small sector and therefore its production is not as widely spread as that of starch. Eight units manufacturing starch in the organized sector also produce liquid glucose simultaneously. There is an ample space for new entrepreneurs to venture into this field. Few Indian Major Players are as under: Anil Products Ltd. Anil Starch Products Ltd. Bharat Starch Inds. Ltd. English Indian Clays Ltd. Gayatri Bioorganics Ltd. Gujarat Ambuja Exports Ltd. Gujarat Ambuja Proteins Ltd. Gulshan Polyols Ltd. Indian Maize & Chemicals Ltd. International Bestfoods Ltd. K G Gluco Biols Ltd. Kamala Sugar Mills Ltd. Karnataka State Agro Corn Products Ltd. Laxmi Starch Ltd. Origin Agrostar Ltd. Pondicherry Agro Service & Inds. Corpn. Ltd. Rai Agro Inds. Ltd. Riddhi Siddhi Gluco Biols Ltd. Santosh Starch Ltd. Santosh Starch Products Ltd. Sayaji Industries Ltd. Sukhjit Starch & Chemicals Ltd. Tirupati Starch & Chemicals Ltd. Unique Sugars Ltd. Universal Starch Chem Allied Ltd. Wockhardt Health Care Ltd. Cost Estimation: Capacity : 30000MT Maize Starch 600 MT Liquid Glucose 3900 MT Dextrose Monohydrate 300 MT Dextrose Anhydrous 17100 MT Sorbitol 150000 Kg/Annum Vitamin C
Plant capacity: -Plant & machinery: 780 Lakhs
Working capital: -T.C.I: Cost of Project : 2590 Lakhs
Return: 42.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

HOSPITAL (200 BEDDED) - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

A private hospital is a place where one may get treatment from ordinary fever to a major surgery operation. As a matter of fact, no limitation has been made for the facilities available in a hospital. However, generally all private hospitals are provided with latest facilities and ultra modern machines. In a hospital surgeons, physicians, E.N.T. specialists, child specialist, eye surgeon, psychologists and sex specialist are essential. Increasing the negligence in the govt. hospitals and overcrowding gave the opportunity to private hospitals to have a good business. Number of private hospitals began to come in light with all facilities for E.C.G., X-Ray, Laboratories, 24 hours emergency and admission facilities for ill persons, seriously injured and pregnant ladies. These hospitals can be seen well crowded as they provide good services at a smile. There are very good scope for private hospitals in metro and small cities. So, starting a new hospital will be profitable venture.
Plant capacity: 200 Beds Plant & machinery: 27 Crores
Working capital: -T.C.I: Total Capital Investment : 151 Crores
Return: 43.00%Break even: 33.00%
Add to Inquiry Add to Inquiry Basket

COLD STORAGE FOR POTATOES & MAHUA - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Plant Layout

India is the largest producer of fruits and second largest producer of vegetables in the world. In spite of that per capita availability of fruits and vegetables in quite low, because of post harvest losses, which accounts 25 to 30% of production. Besides, quality of a sizable quantity of produce also deteriorates by the time it reaches the consumers. This is the mainly because of perishable nature of the producer, which requires a cold chain arrangements to maintain the quality and extend the shelf life if consumption is not meant immediately after harvest. In the absence of a cold storage and related cold chain facilities, the farmers are being forced to sell their produce immediately ions and low price realization. To prevent the wastage of fruits and vegetables it is to required to establish a number of cold storage in different rural areas. Central as well as state governments are providing subsidy for setting up new cold storage. A new entrepreneur can well venture in to this field by installing a project of cold storage to save the fruits and vegetables from wastage.
Plant capacity: 3000 MT Cap. 2000 MT Potatoes/Annum Cap. 1000 MT Mahua/AnnumPlant & machinery: 70 Lakhs
Working capital: -T.C.I: Total Capital Investment : 170 Lakhs
Return: 35.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Maize Starch & Liquid Glucose - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Starch is a group of polysaccharides, composed of glucopyranose units joined together by glucosidric linkages. It conforms to the molecular formula. Where a varies from a few hundred to over one million. Starch is found as the reserve carbohydrate in various parts of plants and is enzymetically broken down to glucose to other carbohydrates according to the metabolic needs of the plants. Starch has many industrial applications. These include (a) Textile Industry (b) Food Industry (c) Paper Industry (d) Pharmaceutical Industry (e) Manufacture of modified starch. Liquid Glucose produced in India is consumed by the confectionery industry. It is used also in textile printing and in biscuit and canning industries, tanning and tobacco curing. This is used in leather, textile, pharmaceutical and other industries. The history of starch industry dates back to early forties. There are few units at present in the country producing starch from maize and three units producing starch from Tapioca in the organized sector. There is bright market potential for maize starch and liquid glucose. New entrepreneurs can venture into this field. Few Indian Major Players are as under: Anil Products Ltd. Anil Starch Products Ltd. [Merged] Bharat Starch Inds. Ltd. [Merged] English Indian Clays Ltd. Gayatri Bioorganics Ltd. Gujarat Ambuja Exports Ltd. Gujarat Ambuja Proteins Ltd. [Merged] Gulshan Polyols Ltd. Indian Maize & Chemicals Ltd. International Bestfoods Ltd. [Merged] K G Gluco Biols Ltd. [Merged] Kamala Sugar Mills Ltd. Karnataka State Agro Corn Products Ltd. Laxmi Starch Ltd. Origin Agrostar Ltd. Pondicherry Agro Service & Inds. Corpn. Ltd. Rai Agro Inds. Ltd. Riddhi Siddhi Gluco Biols Ltd. Santosh Starch Ltd. Santosh Starch Products Ltd. Sayaji Industries Ltd. Sukhjit Starch & Chemicals Ltd. Tirupati Starch & Chemicals Ltd. Unique Sugars Ltd. Universal Starch-Chem Allied Ltd. Wockhardt Health Care Ltd. [Merged] Cost Estimation: Capacity : Maize Starch 22312 MT/Annum Liquid Glucose 8925 MT/Annum Germ (Bye Product) 1785 MT/Annum Fibre (Bye Product) 892 MT/Annum Steep Water (Bye Product) 2677 MT/Annum
Plant capacity: -Plant & machinery: 1477 Lakhs
Working capital: -T.C.I: Cost of Project : 2425 Lakhs
Return: 41.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 15 of 237 | Total 2366 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 236 237   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top