Google Search

Search

Already a Member ?

Best Business Opportunities in Mizoram- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mizoram is a state of India. It is located in the northeastern part of the country and is bounded by Myanmar (Burma) to the east and south and Bangladesh to the west and by the states of Tripura to the northwest, Assam to the north, and Manipur to the northeast. The capital is Aizawl, in the north-central part of the state. Agriculture is the dominant economic activity of Mizoram, engaging more than two-thirds of the workforce. Two types of agriculture are practiced: terrace cultivation, in which crops are planted on relatively permanent, graduated terraces on the sides of hills and mountains to conserve water and reduce soil loss; and shifting agriculture, in which tracts called jhum are cleared by burning, cultivated for a limited period of time. Mizoram has a population of 1,091,014 with 552,339 males and 538,675 females. This reflects a 22.8% growth since 2001 census; still, Mizoram is second least populated state of India. The sex ratio of the state is 976 females per thousand males, higher than the national ratio 940. The density of population is 52 persons per square kilometer. Mizoram gross state domestic product (GSDP) in 2011-2012 was about 6991 crore (US$1.1 billion). The state's gross state domestic product (GSDP) growth rate was nearly 10% annually over 2001-2013 period. With international borders with Bangladesh and Myanmar, it is an important port state for Southeast Asian imports to India, as well as exports from India.

TOURISM

Mizoram, the Land of the Highlanders, is sandwiched between Myanmar, Bangladesh and the states of Tripura, Assam and Manipur. The rivers, peaks, plains and the lakes are the treasures of Mizoram. It is full of high ranges running from north to south covered by greenery throughout the year. The Mizoram State Government begins to recognize tourism as an important sector of the economy which needs to be developed for greater income generation. More emphasis on sustainable eco-tourism, adventure tourism, village tourism and rural tourism would bring in high - value tourism. With the increase of tourist the need for budget hotels has been acutely felt.

Tourism has emerged as an important economic activity and one of the fastest growing industries in the world. Globally, Tourism is the fastest growing industry and in terms of value, it comes third only after petroleum and Transport Industry.

As such, Tourism Department in Mizoram is also one of the fastest growing Departments in Mizoram. The Department has achieved these objectives by constructing Tourist Lodge, Tourist Resort and other Tourist amenities in difference places of Mizoram through liberal financing of Ministry of Tourism, Government of India.


INDUSTRIAL POLICY

The Industrial Policy of Mizoram State was first notified on 15.3.1989 to give direction to the strategy for Industrial development of the State. It laid stress on reducing shifting cultivation by encouraging a shift from primary to secondary sectors while protecting the Socio-Cultural and ethnic identity of the indigenous enterprise of Mizoram.

In view of the National Industrial Policy which laid special emphasis for the development of Industries in the North Eastern Region, the Govt. of Mizoram had notified new Industrial Policy 2000 for accelerated Industrial and Economic development of the State. The Government had adopted the approach for identification of thrust areas and promoting them with fiscal and other incentives packages. Broad policy of Foreign Direct Investment (FDI) and Investment from outside the State has been adopted on Joint venture (JV) mode to safeguard the interest of the tribal population of Mizoram. Various administrative support system and market support system are also announced. The Govt. of Mizoram is mandated in giving sustainable employment and introducing better utilization of land by introducing New Land Use Programme (NLUP).

OBJECTIVES

•        To create infrastructure facilities, provide incentives and marketing as well as technical support to industries.

•        To provide skill development and training for educated youth to develop entrepreneurial skills and make them self-employed.

•        To create employment opportunities particularly to the vulnerable section of the society and people in rural area, ensuring inclusive development.

•        To reduce sectoral and regional imbalance in the industrial development in the State by promoting Industries under all sectors.

•        To create proper linkage of processing Industries with the farm produce of agriculture, horticulture, forest and livestock’s.

•        To attract investment in the state.

IDENTIFICATION OF THRUST AREAS

Thrust will be given for those industries based on value addition of locally available resources. Special incentives will be formulated for speedy development of industrial units engaged in any of the following thrust sector Enterprises.

•        Forest-based Industries

The vast bamboo and other forest resources of Mizoram will be optimally harvested for setting up of Industry for manufacturing of various high value bamboo and other forest based products.

•        Food Processing Industries

Primary production of various food items, whether agricultural based, horticultural or livestock based will be linked with processing Industries.

•        Handloom Industries

Handloom sector will continue to receive serious attention of the Govt. Utmost importance will be given for improving quality product by introducing improved design, packaging, branding.

•        Handicraft Industries

The traditional skill of Mizo people will be upgraded and diversified for market competitiveness of handicraft products.

•        Plantain fibre and hill brooms

The Govt. will encourage value addition of hill-brooms. The flow of raw and unprocessed broom outside the state will be discouraged by giving attention towards value addition to help local industry.

•        Textile related industries

Bulk production of readymade garments will be encouraged as this sector is having good potential for market outside the state and export.

•        Animal Feed and poultry feed Industries

The Government is giving thrust towards having sufficient meat and meat products for which farming has been encouraged.

INCENTIVES

The incentives offered under the Rules for the grant of incentives/subsidies under the Industrial Policy of Mizoram State are-

•        Subsidies on the cost of Project Report 

•        Land subsidy

•        Factory rent subsidy

•        Manpower development subsidy

•        Interest subsidy

•        Power subsidy

•        Subsidy on Power Line 

•        Subsidy on Power Generating set

•        State Transport subsidy on Plant and Machinery 

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 197 of 199 | Total 1985 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 197 198 199   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Paracetamol (BP/IP/USP Grade)

India is the leading supplier of generic medications in the world. More than half of global demand for vaccines is met by the Indian pharmaceutical industry, which also supplies 40% of generic demand in the United States and 25% of all pharmaceuticals in the United Kingdom. The pharmaceutical sector supplies over 70% of India's needs for bulk medicines, drug intermediates, pharmaceutical formulations, chemicals, tablets, capsules, orals, and injectables. In India, there are roughly 250 large units and 8000 small scale facilities in the pharmaceutical industry (including 5 Central Public Sector Units). The following are some of the uses of paracetamol powder: a) Fever: It is often used to treat fever in persons of all ages. Paracetamol is recommended when a child's temperature climbs above 38.5 degrees Celsius. b) Discomfort relief: It can also be used to relieve mild to moderate pain. c) Osteoarthritis: Paracetamol has been shown to reduce arthritic pain in the knees, hands, and hips in several studies. d) Lower Back Discomfort: It is utilised as a first-line treatment for lower back pain. e) Headache Swiss: Paracetamol with caffeine is also utilised by headache organizations in Austria and Germany. In India, paracetamol is also used to alleviate headaches. Paracetamol is also used to treat migraines in some countries. f) Toothache: Paracetamol has been shown to be beneficial in the treatment of toothache in several studies. g) Menstrual Period Pain: Paracetamol is usually used for menstrual period pain in combination with Dicyclomine Hydrochloride or Mefenamic Acid. h) Cold/Flu Pain: Paracetamol is frequently used in conjunction with anti-cold medications to treat Cold/Flu Pain. The paracetamol market in India is predicted to grow rapidly over the forecast period. The paracetamol market in India is driven by the widespread use of paracetamol as a first-line treatment for pain and fever reduction. Furthermore, the drug's widespread use in COVID-19 patients to alleviate various cold, cough, and fever symptoms is expected to boost market growth through FY2026. The Indian pharmaceutical industry is expected to be worth $100 billion by 2025, while the medical device industry will be worth $25 billion. India's pharmaceutical exports totalled US$ 16.3 billion in fiscal year 2020. Few Indian Major Players 1. Alpha Remedies Ltd. 2. Farmson Pharmaceutical Gujarat Pvt. Ltd. 3. Granules India Ltd. 4. HaffkineAjintha Pharmaceuticals Ltd.
Plant capacity: Paracetamol Powder (IP/BP Grade)50 MT Per Day Acetic Acid (31% Conc.) By Product 72 MT Per DayPlant & machinery: 962 Lakhs
Working capital: -T.C.I: Cost of Project: 2887 Lakhs
Return: 32.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Alloy Wheels for 2 Wheelers

When an object is forced against a surface, the wheel is a mechanism that lets the thing to go efficiently across it. A horizontal slice of a trunk does not suit due to the structure of wood, as it lacks the structural strength to support weight without collapsing, therefore rounded pieces of longitudinal boards are required. Alloy wheels are automobile wheels made from an alloy of aluminium or magnesium metals (or sometimes a mixture of both). Alloy wheels are lighter than normal steel wheels, allowing for faster vehicle speeds. Because alloy wheels are lighter than steel wheels, they perform better in most conditions. In terms of fuel economy, alloy wheels have a major benefit, particularly in urban areas. Due to their lighter structure, alloy wheels will put less strain on the vehicle's suspension. As a result, faster acceleration will be feasible. Alloy wheels have become the standard wheels for most cars due to their greater performance and attractive design. Alloy wheels are more expensive than steel wheels, although they account for the vast majority of OEM wheels. This provides you with more options and choices. The overall alloy wheel sector in India has been continuously growing, with growth expected to accelerate in the next 5-6 years. The alloy wheel market is anticipated to be worth roughly INR 21,000 million in terms of value. Alloy wheels account for less than 20% of the market in India, compared to steel wheels, which account for more than 80%. In the short to medium term, the forecast for the alloy wheel market in India is positive. Few Indian Major Players 1. Alcoa India Pvt. Ltd. 2. Enkei Wheels (India) Ltd. 3. S A B Industries Ltd. 4. Wheels India Ltd.
Plant capacity: Alloy Wheel for 2 Wheeler 1,000 Pcs Per DayPlant & machinery: 133 Lakhs
Working capital: -T.C.I: Cost of Project: 891 Lakhs
Return: 26.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Fiberglass Wool Ceiling Tiles

Fiberglass ceiling tiles are made mostly of glass fibres encased in polymers and provide a number of advantages in a variety of applications. These are typically green building materials; lighter tiles can also be thrown directly on the ceiling without sagging or deterioration. Fiberglass, often known as glass wool, is one of the most effective insulating materials on the market, both thermally and acoustically. It is non-combustible even when in direct and continuous contact with flames. It does not emit toxic gases or smoke, two of the most dangerous health and life dangers in the event of a fire. Glass wool is a non-flammable material. It does not produce toxic fumes or smoke, two of the most dangerous health and life dangers linked with a burn. Acoustic ceiling tiles made of fibreglass are lightweight, easy to handle, and give the best sound absorption. These are employed in the following scenarios: • Commercial suspended ceilings • Auditoriums • Multiplexes • Theatres • Lecture halls • Libraries • Offices with an open floor plan • Meeting Rooms for Conferences • Bars and Pubs • Home Cinemas • Yoga and Meditation Centers In India, the fibre ceiling business has a promising future, with opportunities in both commercial and residential applications. The market is expected to grow due to increased demand for acoustic and thermal insulation, rising disposable income in developing countries, and shifting consumer preferences toward the aesthetics of homes and businesses. The adoption of sustainable and innovative building solutions, such as the use of eco-friendly materials for ceilings, floors, and walls, is anticipated to benefit market dynamics. The market's expansion is being stifled by the high raw material costs of ceiling tiles. Furthermore, ceiling tile installation is costly because it necessitates the services of a professional. Few Indian Major Players 1. K-Flex India Pvt. Ltd. 2. Lloyd Insulations (I) Ltd. 3. Owens Corning Inds. (India) Pvt. Ltd. 4. Rock Wool (India) Pvt. Ltd. 5. Saint-Gobain Gyproc India Ltd.
Plant capacity: Fiberglass Wool Ceiling Tiles 3,000 Sq. Mtr. Per DayPlant & machinery: 482 Lakhs
Working capital: -T.C.I: Cost of Project: 1082 Lakhs
Return: 27.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Industrial and Pharmaceutical Grade Starch from Cassava, Maize and Tacca Roots

Starch can be found in cassava, sorghum, maize, sago, and potatoes. The initiative's concentration, however, was on cassava starch production. Cross-linking starch results in a product that can be used to produce noodle, salad cream, or custard. This product is often made with corn and potato starch, but cassava, which is readily available and inexpensive, can be utilised to meet the needs of the people. Cassava (ManihotesculentaCrantz), also known as yucca in Central America, mandioca or manioca in Brazil, tapioca in India and Malaysia, and cassada or cassava in Africa and Southeast Asia 39, 40, is a lowland tropics starchy staple and a major source of food support for some of the world's poorest countries 39, 40. MAIZE STARCH: Maize starch is a corn starch that is extracted from the grain (maize). The starch is taken from the endosperm of the kernel. Corn starch is a common food additive that thickens sauces and soups, as well as being used to make corn syrup and other sugars. TACCA STARCH (TACCA LEONTOPETALOIDES): Tacca starch is derived from the rhizomes of the Taccaceae plant Taccaleontopetaloides. In the humid tropics of Asia, Australia, and the Pacific islands, the genus Tacca contains about 30 species of perennial herbs with tuberous or creeping rhizomes. The tubers contain a 22.40 percent dry matter content and a 10.22 percent starch content. Increased use of starch in the production of biodegradable plastic and food items, as well as its additions in bakeries, snacks, drinks, and functional meals, as well as rising demand in various non-food applications, is driving the Industrial Starch Market. In a number of meals, starch and its derivatives are used as thickeners, stabilisers, sizing agents, fat replacers, and binding agents. The global modified starch market is anticipated to be valued USD 13.1 billion in 2020, growing to USD 14.9 billion by 2025, indicating a 2.7 percent compound annual growth rate (CAGR). Because of its expanded use in a wide range of meals, as well as the cost-effectiveness and enhanced functionalities it provides over native starch, it is experiencing significant expansion.
Plant capacity: Industrial Grade Starch 37.5 MT Per Day Pharmaceutical Grade Starch 12.5 MT Per DayPlant & machinery: 257 Lakhs
Working capital: -T.C.I: Cost of Project: 1255 Lakhs
Return: 28.00%Break even: 76.00%
Add to Inquiry Add to Inquiry Basket

Non-Woven Geotextile

Geotextiles are permeable geosynthetics manufactured from textile or fabric materials. Geotextiles are made from polypropylene, polyester, polyethylene, polyamide, and other polymers. Geotextiles provide a variety of roles, including separation, drainage, filtration, reinforcing, and protection. Geotextiles are used in a variety of ways in India. Chemically or thermally glueing materials together, needle punching, and other methods are used to create non-woven geotextiles. Non-woven geotextiles are synthetic geotextiles that are often used in filter or separation applications, as well as projects where pooling water is a major issue. Nonwoven geotextiles are employed when both soil isolation and permeability are required. These materials are commonly used to wrap French drains or to work with other sub-surface drainage systems. Non-woven geotextiles are used in a variety of applications, including river erosion control, railways, landfills, canals, and water proofing. Non-woven is also frequently used beneath rock riprap revetment, where drainage and separation are critical. Non-oven geotextiles are the most popular type of geosynthetic in terms of volume. Only a few of the applications include geotechnical engineering, heavy construction, building and pavement construction, hydrogeology, and environmental engineering. According to the "India Geotextiles Market research," the non-oven geotextiles market in India is predicted to grow at a CAGR of nearly 12% between 2017 and 2026. There are three types of geotextiles on the Indian market: woven, non-woven, and knitted. The nonwoven geotextile market in India accounts for the biggest share of these categories. The category is predicted to maintain its dominance over the forecast period. Because they filter well and are heat resistant, nonwoven geotextiles are used to prevent soil erosion, as pound underlayment, and as separating cloths. Few Indian Major Players 1. Maccaferri Environmental Solutions Pvt. Ltd. 2. Parry Enterprises India Ltd. 3. Skaps Industries India Pvt. Ltd. 4. Strata Geosystems (India) Pvt. Ltd. 5. Techfab (India) Inds. Ltd.
Plant capacity: Non-Woven Geotextile 200,000 SQM Per DayPlant & machinery: 4312 Lakhs
Working capital: -T.C.I: Cost of Project: 5419 Lakhs
Return: 27.00%Break even: 37.00%
Add to Inquiry Add to Inquiry Basket

Milk Powder (Baby Milk for 0 to 5 year, Milk Powder for Coffee and Tea)

Milk is an essential part of human diet. It's nutrient-dense, delicious, and easy to digest. Proteins, fats, sugars, minerals, and a wide range of vitamins are all abundant. In terms of milk production, India ranks only behind the United States of America and the Soviet Union. However, India's milk output is insufficient to fulfil the needs of the country's massive population, with daily average intake per person falling short of the optimal requirement of around 310 grammes. Milk and milk products come in a variety of forms, including fresh milk products, concentrates, and dried items. Milk powders can be used in place of fresh milk and concentrates. The conversion of liquid dairy streams to powder results in a convenient and consistent supply of milk solids. 1. Milk Powder is eaten as a snack. 2. It's a full-fledged newborn food. 3. Among other things, it's used to manufacture curd, butter, ghee, cream, and ice cream. 4. Milk powder is found in nearly every home. 5. It's utilised in the production of milk meals, as well as tea and coffee, at hotels and restaurants. 6. It's used to make cheese, yoghurt, ice cream, and lassi, among other things. The global milk powder market is estimated to grow at a CAGR of 4.4 percent between 2018 and 2025, from $27,783.3 million in 2017 to $38,086.1 million in 2025. Milk powder is a dehydrated dairy product created by evaporating milk. The purpose of making milk powder is to extend the shelf life of milk without using a refrigerator. There are several types of milk powder available, including whole milk powder, skimmed milk powder, dairy whitener, and various variations of milk powder. Few Indian Major Players 1. D S P I Milk Foods Ltd. 2. Haryana Milk Foods Ltd. 3. Herman Milkfoods Ltd. 4. K K Milk Fresh India Ltd. 5. Kamdhenu Foods Ltd. 6. Markandeshwar Foods & Allied Products Ltd.
Plant capacity: Baby Milk Powder 400 gms Size Pack 62,500Nos Per Day Milk Powder for Tea & Coffee 200 gms Size Pack 25,000 Nos Per Day Milk Powder for Tea & Coffee 500 gms Size Pack 10,000Nos Per DayPlant & machinery: 948 Lakhs
Working capital: -T.C.I: Cost of Project: 2711 Lakhs
Return: 29.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Copper Wire Drawing & Enamelling

Copper is one of the oldest materials known to man, as well as one of the most widely utilised non-ferrous metals today. Copper, like Ag and Au, belongs to the first row of transition elements, which also includes Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, and Zn. It belongs to the periodic table's group 11. The element has an atomic number of 29, a mass of 63, two major oxidation states (+1 and +2), and two naturally occurring isotopes (63Cu and 65Cu) with corresponding abundances of 69.17 percent and 30.83 percent. Copper is easy to stretch, mould, and shape, is corrosion-resistant, and has excellent heat and electrical conductivity. As a result, copper was essential to early humans, and it is still employed in a variety of applications today. The winding of motors and transformers is done with copper wire. Copper wire is available in several gauges (32 gauge to 18 gauge). The winding required for the specific motor or transformer determines the copper wire gauge. Wire having a conductor diameter of 0.500 to 4.000 mm is suitable for submersible motor winding. Copper wire is in high demand among motor and transformer makers, as well as for motor and transformer rewinding. Copper wire is used in a variety of applications such as power generation, transmission, distribution, telecommunications, electronics circuitry, and a variety of electrical equipment. Copper and copper alloys are also used to make electrical connections. Building electrical wire is the most important market for the copper industry. Copper is mostly used in the electrical industry for components such as electrical apparatus, bus bars, and wire. Copper is not very ductile at temperatures between 250 and 600°C, and it cannot be forged or stamped at temperatures above 800°C due to its high brittleness. Pure copper is rarely forged or stamped, and only its alloys bronze and brass are regularly forged or stamped. Cables and wires, which account for approximately 40% of India's electrical industry, are in high demand due to the growing demand for electricity, light, and communication. Wires and cables are widely utilised in a number of industries and serve a critical role in the development of infrastructure. The need for wire and cables is closely tied to the growth of the manufacturing industry and infrastructure in the electrical, telecommunications, residential, and commercial sectors. As a result, the government's initiatives on a variety of fronts, such as power, housing, infrastructure, and digitization, are almost certain to generate a lot of business for the wire and cable industry in the coming years. Few Indian Major Players 1. Bharat Insulation Co. (India) Pvt. Ltd. 2. Chandra Metals Pvt. Ltd. 3. Elite Conductors Ltd. 4. Grid India Power Cables Pvt. Ltd. 5. Khandelwal Cables Ltd. 6. Madhav Copper Ltd.
Plant capacity: Copper Wire (0.914 to 0.376 mm) 350 Kgs per day Enamelled Copper Wire (0.914 to 0.376 mm) 350 Kgs per day Intermediate Copper Wire (2.5 mm) 4,000 Kgs per day Intermediate Copper Wire (1.2 mm) 5,000 Kgs per dayPlant & machinery: 432 Lakhs
Working capital: -T.C.I: Cost of Project: 1233 Lakhs
Return: 28.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Tomato Ketchup & Mayonnaise

Tomatoes are one of the most important food crops in India. It is found in almost every state in the United States. The top producers are Bihar, Karnataka, Uttar Pradesh, Orissa, Andhra Pradesh, Maharashtra, Madhya Pradesh, and West Bengal. Vitamins A and C, as well as potassium, minerals, and fibre, are abundant in tomatoes. Because the raw material can be found all throughout the country. Tomatoes are one of the most important "protective foods" due to their great nutritional value. It's one of the most flexible vegetables, and it's been used in Indian cooking for centuries. Tomatoes are used in soups, salads, pickles, ketchup, purees, sauces, and more. Ketchup, an acidic, seasoned tomato sauce, is one of America's favourite condiments. Although ketchup, sometimes known as catsup, is most commonly associated with hamburgers, hot dogs, and French fries, it can also be found in sauces, meatloaf, beans, and stews. Mayonnaise is one of the most popular sauces in the world. Egg yolks, vinegar, oil, and a few other ingredients are used to make a semi-solid oil-in-water emulsion. Mayonnaise is available in a range of colours, although the most popular are white, cream, or pale yellow. It can range in texture from a light cream to a thick gel. It's served with sausages, burger patties, chips, and salads as a culinary flavouring and hunger stimulant. It can range in texture from a light cream to a thick gel. It's offered with sausages, burger patties, chips, and salads as a culinary flavouring and to whet the appetite for a first meal. Mayonnaise has a high oil content, which contributes to the product's lubricity and creamy texture. Mayonnaise is an emulsion, which is a mixture of two liquids that would not normally mix together. Combining oil with water is a famous example. A tiny number of unorganised and individually owned firms produce mayonnaise. It's a better alternative product, to put it that way. Vegetable oil, vegetable protein, milk protein, egg protein, fat emulsifier salt, and water are the most common basic materials used in product manufacture. All of the basic raw materials are readily available in India. A mixer, a digital balance, an emulsifying machine or a colloid mill, holding tanks, a boiler, and other basic plant and machinery are needed. The machines are all manufactured in the United States. The global tomato ketchup market will be worth US$ 19.70 billion in 2020. The market is estimated to grow at a CAGR of 4.70 percent from 2021 to 2026. Table sauce, often known as tomato ketchup, is a cold condiment produced from soft red tomatoes that mixes well with both hot and cold dishes. It has a sweet and tangy flavour and is usually used to snacks and appetisers to enhance their flavour. In a blender, combine ripe blanched tomatoes, vinegar, sugar, and a selection of seasonings and herbs to make tomato ketchup. In India, the mayonnaise and salad dressing industry is becoming one of the most active and rapidly growing segments of the food service industry. As a result of improving living standards and changing lifestyles, the need for sophisticated taste in meals is becoming a growing trend in the food industry, which is benefiting the mayonnaise and salad dressing sectors. The demand for mustard sauce, caeser salad dressing, creamy cheese salad dressings, liquid salad dressing sauces, Italian and Russian salad dressing, thousand island salad dressing, eggless and garlic mayonnaise, and other mayonnaise and salad dressing products is higher than ever, giving the Indian market a boost. Few Indian Major Players 1. Adinath Agro Processed Foods Pvt. Ltd. 2. Cremica Food Inds. Ltd. 3. Del Monte Foods India Pvt. Ltd. 4. General Mills India Pvt. Ltd.
Plant capacity: Tomato Ketchup (500 gms Size Glass Bottle) 4,000 Nos. per day Mayonnaise (500 gm Size Glass Bottle) 2,000 Nos. per day Mayonnaise (200 gm Size Pouches) 5,000 Nos. per dayPlant & machinery: 67 Lakhs
Working capital: -T.C.I: Cost of Project: 362 Lakhs
Return: 30.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

HDPE Pipes

For decades, HDPE pipe has been used in non-potable water applications. Because of its welded joints, HDPE pipes are very popular. While welding necessitates the use of specialised equipment, it eliminates the need for separate fittings, which are a typical source of leaks and contaminant infiltration. HDPE is a very flexible polymer that can endure more abuse on the job site than brittle polymers such as PVC. Because of the flexibility of the piping system, turns can be achieved without the use of additional joints. High density polyethylene (HDPE) is used as a drainage pipe material because it is lightweight, corrosion resistant, easy to install, and has a low maintenance cost. The design of HDPE corrugated drainage pipe is based on the idea that it will deform and so alleviate stress. As a result, ductility is an important quality for allowing for deflection during the pipe's service life. HDPE resins with low ductility may induce unexpected breaking in the pipe due to a phenomenon known as "slow crack advancement." To decrease cracking, the stress crack resistance (SCR) of HDPE resins must be properly assessed. HDPE pipes are corrosion-resistant and simple to work with, making them more practical and long-lasting. HDPE pipes are lightweight and use less energy to manufacture. Other polyethylenes have varied densities, hyper-branched crystallinities, molecular weights, and chain structures. HDPE may be processed at temperatures ranging from 160°C to 250°C, with a shrinkage rate of 1.5 to 3%. Due to its great heat resistance, flexibility, and machinability, HDPE is a prominent polymer in the production of a wide range of plastic goods. The India HDPE Pipes Market was valued $99.9 million in 2018, and is expected to increase at a CAGR of 11.2 percent to $233.5 million by 2026. High density polyethylene (HDPE) pipes are made from raw materials such as PE 63, PE 80, and PE 100. One of the key advantages of HDPE pipes is that they are 6-8 times lighter than cast iron and galvanised iron pipes. HDPE pipes may be easily moulded and welded together due to their high chemical resistance. They are also non-corrosive, making them a great choice for a wide range of applications. Few Indian Major Players 1. Alom Poly Extrusions Ltd. 2. Captain Polyplast Ltd. 3. Dutron Polymers Ltd. 4. Greenfield Irrigation Ltd. 5. JayshreePolytex Ltd. 6. Kunststoffe Industries Ltd. 7. Nimbus Pipes Ltd.
Plant capacity: HDPE Pipes 7,200Kgs per dayPlant & machinery: 82 Lakhs
Working capital: -T.C.I: Cost of Project: 541 Lakhs
Return: 27.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

Bamboo Sticks

Bamboo is a tribe of flowering perennial evergreen plants in the grass family Poaceae, subfamily Bambusoideae, tribe Bambuseae; however, in many countries where bamboo is used as a building material, forestry services and departments consider bamboo to be a forestry product, and it is specifically harvested as a tree exclusively for the wood it produces, which is in many ways superior to wood. In fact, it is usually referred to be a tree by cultures that harvest it for wood. Despite the fact that India is the world's second-largest producer of bamboo, 70% of the bamboo used in agarbatti is imported. Imported bamboo sticks are often better in terms of dimension regularity and quality than handmade sticks made in India. When burned, incense sticks are long, cylindrical structures with a bamboo core wrapped in fragrant materials, filling the air with fresh air and perfume. Incense sticks are used for a variety of religious purposes, including cleaning the air, releasing positive energy into the atmosphere, and expelling negative energy from our surroundings. Incense sticks are used in a variety of ceremonies and rites in temples, churches, mosques, and monasteries, among other places, in almost all religions. Currently, the Indian government's ministry of business and trade is in charge of incense stick production (GOI). The main ingredients in incense sticks vary depending on the industry, but they typically include charcoal powder, sticky powders such as Jigat, Sal resin, Guggul, Nargis powder, raw bamboo sticks, water, various oils, aromatic essence, flower essence, sandalwood oil, rose petals, natural and chemical aromatic ingredients, sawdust, and various colour powder. Because incense sticks are in such high demand in India, they are sold through all channels of commerce and distributed to people through retail. The retail mode has a positive impact on sales, and the CAGR is predicted to be around 6% in the next years. India's incense sticks and Dhoop (a sort of incense product) industry is a highly export-oriented industry that brings in significant money for the country. Year after year, India's exports of incense sticks and Dhoop grow, helping to close the country's trade deficit. In terms of both consumption and production, India is the world's largest incense stick market. The market has derived from the highest presence of agarbatti goods, which has grown at a CAGR of over 7% in the last several years. However, because to the items' wide range of smells and long-lasting qualities, consumer acceptance of dhoop goods has increased in recent years. In the coming years, the market for dhoop items is expected to grow at a CAGR of more than 9%, driving up demand for bamboo even more.
Plant capacity: Bamboo Sticks 4 MT Per DayPlant & machinery: 443 Lakhs
Working capital: -T.C.I: Cost of Project: 791 Lakhs
Return: 26.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 197 of 199 | Total 1985 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 197 198 199   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top