Google Search

Search

Already a Member ?

Best Business Opportunities in Meghalaya- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Meghalaya is a state in north-east India. The name means "the abode of clouds" in Sanskrit. As of 2011, the state has a population of 2,964,007 and is the 23rd most populous in the country. The population of Meghalaya as of 2014 is estimated to be 3,211,474. Meghalaya covers an area of approximately 22,430 square kilometers, with a length to breadth ratio of about 3:1

Meghalaya is predominantly an agrarian economy. Agriculture and allied activities engage nearly two-thirds of the total work force in Meghalaya. However, the contribution of this sector to the State's NSDP is only about one-third. Agriculture in the state is characterized by low productivity and unsustainable farm practices. Despite the large percentage of population engaged in agriculture, the state imports food from other Indian states.


TOURISM

 Meghalaya has some of the thickest surviving forests in the country and therefore constitutes one of the most important ecotourism circuit’s in India. The Meghalaya subtropical forests support a vast variety of flora and fauna. Meghalaya has 2 National Parks and 3 Wildlife Sanctuaries.   Meghalaya also offers many adventure tourism opportunities in the form of mountaineering, rock climbing, and trekking and hiking, water sports etc. The state offers several trekking routes, some of which also afford an opportunity to encounter rare animals such as slow loris, assorted deer and bear. The Umiam Lake has a water sports complex with facilities such as rowboats, paddleboats, sailing boats, cruise-boats, water-scooters and speedboats. Tourism in India is a growing industry, and as per World Tourism Organization predictions, India will be a leader in using tourism as an employment generator. The State of Meghalaya must be placed in a strategic position to take advantage of this growth.

“MEGHALAYA TOURISM DEVELOPMENT CORPORATION” has been set up for developing and promotion of Tourism in Meghalaya. The Corporation shall make efforts to increase its revenue to enable to carry out promotional activities. MTDC will organize package tours not only to Cherrapunjee but to other tourist destinations; organize training for guides, etc.

INDUSTRIAL SECTOR

The New Industrial & Investment Promotion Policy is designed to facilitate investments in new sectors across the State and thus ensure accelerated and sustained growth. The Policy focuses to attract, facilitate and promote wider expectations and high end investment.

There is an urgent need to promote investment in backward and difficult but resource rich areas. Therefore the policy provides additional incentives and support for such investments.


OBJECTIVE OF THE POLICY

•        To promote investment in all sectors

•        Generate employment opportunities for the local people in the industries and allied sectors.

•        To provide special incentives for promoting local Entrepreneurs in setting up of micro, small & medium manufacturing and service enterprises.

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage.

•        Achieve a balanced and growth oriented development covering the entire state through promotion of village and small scale industries.

•        Encourage need based development of local entrepreneurial skills through intensive motivation and training programmes at District, Sub-division and Block levels.

•        Provide guidance to prospective entrepreneurs by building up a data bank of project-profiles and other connected information. Special support to local entrepreneurs will be provided, and monitoring will be done to enable them to be successful.

•        Simplify rules and procedures by providing a single-window clearance facility for all investment proposals as applicable.

•        Promote Tourism, and make Meghalaya a tourist destination.

•        Promote IT as industries.

•        Promote first generation entrepreneurs. Government will encourage setting up of Entrepreneurship Development Institute by private or in PPP mode.

SALIENT FEATURES OF THE INDUSTRIAL POLICY

•        State Government believes in promoting private enterprises for speedy economic development of the State. The Government also stands committed to ensuring the healthy growth of existing industries. For this purpose, Government will ensure optimum number of industries by not permitting excess in any specific sector, thereby ensuring sustainability of existing business.

•        Enterprises promoted and managed by “Woman Entrepreneur”/physically challenged will get additional 10 % (ten percent) incentives on the State Capital Investment Subsidy.

•        Meghalaya has a long international border which needs immediate attention for development. To address this issue, 10 Kms towards the State from the International border is declared as “PRIORITY AREA” and enterprises set up within the 10 Kms area will be given special incentives to be known as “Border Area Subsidy”.

•        Government of Meghalaya recognizes:

1.       Hotels (not below two star category) and Amusement Parks.

2.       Medical and health services in the nature of nursing homes with a minimum capacity of 25 beds and Super – Specialty Health Care.

3.       Vocational training Institutes.


INDUSTRIES IDENTIFIED AS THRUST AREAS

                    Agro Based Industries :

   Horticulture – Based Units

   Biotechnology Based Units

   Medicinal Plants, Tea and Rubber

                       Animal Husbandry and Meat Processing Industries

         Development of Mineral based Industries:

      Coal-Based Industries

     Limestone Based Industries- Cement Plants, Lime Plants,

                      Calcium Carbide   Plants.

                       Electronics & Information Technology

INCENTIVES FOR LARGE AND MEDIUM SCALE INDUSTRIES

•        For large and medium scale industries, there are subsidies like capital investment subsidy, interest subsidy, power subsidy, subsidy on cost of pollution/quality-control measures, special subsidy for pioneer units in backward areas etc.

•        Exemption from the payment of applicable service tax for seven years to a "Tourism Unit"

•        Sales Tax exemption on sale of finished products for a period of seven years from the date of commercial production.

•        Reimbursement of Central Sales Tax (CST) paid on purchase of Capital Equipment installed till the date of project commissioning.

•        Partial exemption for applicable stamp duty.

INVESTMENT POLICIES

Meghalaya Government has always endeavored to set up the right kind of business climate to motivate investments in the State. In order to attract investment to the various sectors and thus contribute to the development of the economy as a whole.

The major being the industrial policy, which had been announced with a view to take advantage of the liberalized economic scenario in the country and also to keep pace with development in the national industrial sector are-

•        Generate employment opportunities for the local people in the industries and allied sectors

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage. Create a conducive environment for industrial development by creation of the basic Infrastructural facilities and by setting up of industrial areas, growth centre and export promotion industrial park.

•        Provide preference to local Entrepreneurship in setting up of large, medium and small-scale units.

•        Promote local interests through joint ventures with external investors so as to facilitate technology transfer and capital flow by a package of suitable incentives.

•        Encourage setting up of export-oriented, Agro based, Mineral-based, Horticultural based and Electronic units as thrust area.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 12 of 220 | Total 2192 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 219 220   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

CANCER HOSPITAL (50 BEDS) - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

Cancer is a term used for diseases in which abnormal cells divide without control and are able to invade other tissues. Cancer cells can spread to other parts of the body through the blood and lymph systems. Every year about 8,50,000 new cancer cases are diagnosed in India resulting in about 5,80,000 cancer related death every year. The cancer hospital is a comprehensive cancer care setup with all the facilities for diagnosis and treatment of all types of cancers under one roof. It is to provide reliable and internationally compatible diagnostic and therapeutic services related to the field of oncology to the patients in particular and society at large. There is good scope for cancer hospitals for all poor, middle and high society people. So, opening a new hospital with all facilities will be highly profitable. Cost Estimation: Capacity : 19600 Outdoor Patients 1400 G. Ward Patients 1050 Special Ward Patients per Year 10 Special Ward 40 General Ward
Plant capacity: -Plant & machinery: 501 Lakhs
Working capital: -T.C.I: Cost of Project : 699 Lakhs
Return: 46.00%Break even: 35.00%
Add to Inquiry Add to Inquiry Basket

Good Prospects for Grain Based Alcohol (Distillery)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Cost of Project

Ethanol, also called ethyl alcohol, grain alcohol or drinking alcohol, is a volatile, flammable, colorless liquid. It is a psychoactive drug, best known as the type of alcohol found in alcoholic beverages and in thermometers. In common usage, it is often referred to simply as alcohol. We provide this chemical with a great degree of purity, & available for a wide range of industrial applications in industrial sectors such as pharma, flavour and fragrances, healthcare and food industries etc. Ethanol has widespread use as a solvent of substances intended for human contact or consumption, including scents, flavorings, colorings, and medicines. In chemistry, it is both an essential solvent and a feedstock for the synthesis of other products. It has a long history as a fuel for heat and light and also as a fuel for internal combustion engines. Neutral alcohol is used for the production of white spirit such as gin and vodka but also as a base for a wide range of flavoured alcoholic beverages. The production of neutral alcohol from malt, grape, apple or sugar has considerably increased over the last few years. There may be local alcohol taxation advantages. This is available in a ready-to-pitch, active form, with proven cost effectiveness versus propagation. Now some grain based distilleries are also coming in India. The scope for grain base alcohol is good, because molasses is not available easily through out the year in comparison of grains. Fuel Ethanol could be blended in various proportions in Petrol usually 5 to 10% by volume. In Brazil, ethanol is added 24% by volume in gasoline (petrol). In U.S.A. Ethanol E10 (absolute ethanol 10% by volume) and ethanol E 85 (absolute ethanol 85% by volume) are popular in flexible fuel vehicles, which can run on either gasoline or ethanol. Fuel Ethanol can be used as on Oxygenate in Petrol. It reduces emission of carbon monoxide by taking combustion to completion. It replaces tetraethyl lead or MTBE, from contaminating surface water. Ethanol maintains the carbon cycle of nature, reducing the greenhouse effect. It is made from renewable sources of material like agricultural products., etc., molasses and prevents depletion of limited sources like fossil fuels. It employees renewable source of energy through a natural route and it reduces dependents on imported crude. As concerns about our nation dependence on foreign oil increase, and awareness on environmental impacts of petroleum increases, the interest in alternative fuels like ethanol is emerging. In many ways ethanol is an ideal transportation fuel. It is better for the environment than petroleum, it is domestically produced, and its use supports farmers and rural economies. By switching to ethanol fuels and advanced vehicle technologies, fleet owners are leading the way to both energy security and cleaner air. The oil companies in India have decided to have the blending units located region wise instead of centralizing at the refinery itself for optimizing transportation cost of petrol. Since the project is located at Salempur, which is about 40 kms from Mathura where the nearest refinery is available, irrespective of locating the blending units at region wise or at refinery, the transportation cost will be minimal. The fuel ethanol manufacturing is a sunrise industry with an excellent potential for growth as it is being introduced first time in India. In U.S.A. and Brazil fuel ethanol is in use for over 20 years and proven technology is already available. Being one of the first unit to start the manufacturing of fuel ethanol MML will be have the momentum of early start. Liquor industry has always remained under strict governmental control in terms of capacity creation, distribution, and taxation. While overall public perception spells restraint, it is the symbol of high life even in puritan India. The industry posses a dilemma to the state, borne by the temptation of large revenues, on the one hand, and the embarrassment in giving encouragement to drinking, on the other. The over Rs 250 bn liquor industry sells around 400 mn cases annually. A large peg of this - 65% - is whisky, followed by brandy and gin at 13%, rum at 17% while the white spirits account for 3% of the market share. Of this, the Indian-made foreign liquor (IMFL) accounts for Rs 78 bn (86 mn cases) with whisky alone constituting for 95%. Besides, there is a large 200-mn cases market of low-priced country liquor. Indian spirit market also consumes branded country liquor worth Rs 125 bn and unbranded country liquor worth Rs 50 bn. India has a small market for wines too, about Rs 500 mn a year. Around 70,000 cases of champagne and 4,000 cases of cognac are also sold annually in the Indian market.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Medical Diagnostic Centre - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

Modern diagnostic centre provides a wide scope for detection of ailments and afford facilities for a detailed medical check-up through diagnostic procedures. To accomplish this objective a modern diagnostic centre should be well equipped with most modern instruments. Which help in the requisite measures for diagnostic purposes. the all diseases need to be checked in the early stage in the diagnostic centre, so that they don’t assume formidable dimension and becomes at a subsequent stage. The number of patients are increasing day by day to cape-up which even the number of hospitals are also increasing, but all patients can not be given apt and Judiciary treatment in the over-busy schedule of preventing in the modern hospital system. There is very good scope for new diagnostic centres.
Plant capacity: Different types of Medical TestingPlant & machinery: 72 Lakhs
Working capital: -T.C.I: 144 Lakhs
Return: 35.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

HOTEL - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project, Projected Balance Sheets

Hotel industry totally depends on the growth of the tourism as well as proper import and export growth of the country. If there are good countries associated in the territory of the region, there will be good scope for business transaction, hence there will be good scope for hotel industries due to the visits of the executives of different countries. Hotel should have good and well educated staff for maintaining the hotels and servicing the customers. The hotel industry is very glamour industry and also the business of hotel industry is growing very fast. But these things are totally depends on the location of hotels. Hotels should be located near about the Air ports, Highways etc. There is good scope for establishment of new hotels in India. The hotel industry in India is going through an interesting phase. The industry has a capacity of 110,000 rooms. According to the tourism ministry, 4.4 million tourists visited India last year and at the current rate, the demand will soar to 10 million by 2010 – to accommodate 350 million domestic travelers. The hotels of India have a shortage of 150,000 rooms fueling hotel room rates across India. With tremendous pull of opportunity, India has become a destination for hotel chains looking for growth. Due to such a huge potential available in this segment, several global hotel chains like the Hilton, Accor, Marriott International, Berggruen Hotels, Cabana Hotels, Premier Travel Inn (PTI), Inter Continental Hotels group and Hampshire among others have all announced major investment plans for the country. The Government's move to declare hotel and tourism industry as a high priority sector with a provision for 100 per cent foreign direct investment (FDI) has also provided a further impetus in attracting investments in to this industry. It is estimated that the hospitality sector is likely to see US$ 11.41 billion rise in the next two years, with around 40 international hotel brands making their presence known in the country by 2011. Simultaneously, international hotel asset management companies are also likely to enter India. Already, US-based HVS International has firmed up plans to enter India, and industry players believe others like Ash ford Hospitality Trust and IFA Hotels & Resorts among others are likely to follow suit.
Plant capacity: Hotel (Total 60 Rooms) Single Room - 30 Nos., Double Room - 30 Nos., Discotheque - 1 No. Plant & machinery: 267 Lakhs
Working capital: -T.C.I: 1264 Lakhs
Return: 46.00%Break even: 35.00%
Add to Inquiry Add to Inquiry Basket

OLEORESINS OF SPICES BY STEAM DISTILLATION PROCESS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunity

Different processing methods are required to extract essential oils from different plants. Most oils are extracted using steam distillation, during which the plant material is permeated with steam. As the plant tissues break down, the essential oils and water vapor are released, then collected and cooled. The volatile essential oil condenses, separates and is easily isolated. In this process the steam is prepared in a separate chamber and piped into the tank. This is more expensive than the other methods. This is especially good for plant materials with high boiling point oils. In this method the temperature and pressure can be increased for certain oils. The rate of distillation and yield of oil are high and the quality of the oil is good. Oleoresins and spice oils have large domestic as well as export markets. They are consumed by a broad spectrum of manufacturers like confectionery, noodles, beverages, sauces, canned meat, soup powders, curries, poultry products and so on. Most of the end use industries are growing steadily and demand is bound to increase. With increasing preference for quality products, use of spices is rapidly replaced with oleoresins and spice oils. Exports of these processed products, instead of raw spices, would also result in considerable value addition. Few Indian Major Players are as under: Akay Flavours & Aromatics Ltd. Bombay Oil Inds. Pvt. Ltd. Global Green Co. Ltd. Kancor Flavours & Extracts Ltd. Novo Agritech Ltd. Sijmak Oils Ltd. South East Agro Inds. Ltd. Synthite Industries Ltd.
Plant capacity: 24000 Kg. Oleoresins/AnnumPlant & machinery: 187 Lakhs
Working capital: -T.C.I: Cost of Project : 375 Lakhs
Return: 45.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

POUCH PACKING AUTOMATIC PLANT -FLEXIBLE PACKAGING (Namkeen, Spice, Mehandi, Milk, Ghee and Zipped Pouches) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery

In the field of packaging thermoplastic film has been widely accepted as an efficient flexible packaging materials. Co-extruded multilayer blown film was introduced a few years back in the field of packaging. It is being used in the packaging of milk, edible oil, shampoo and for packaging of some of ready to eat snacks. Plastic pouches are generally made of high molecular high density & low-density polythene film. Though there is wide variety of thermoplastic being used as packaging materials for general packaging purposes, films, rolls, bags pouches etc. made from various plastic materials are common. In India about 80% of co-extruded multilayer film is consumed by the plants for milk packaging as milk pouches and by vegetable oil mills as oil pouches. Materials selection must reflect the economics of available Form-Fill-Seal machinery. The size of the pouch can vary from about square to large pouches upto 2 or 3 on a side. There is a wide variation in possible sizes but in general the smallest pouches are the four-side-seal units while the larger are pillow pouch. square to large pouches upto 2 or 3 on a side. Pouches are also known as Fascinating packaging gadgets, which provides a good deal of attraction in the packaging world. Pouches are modern cheapest substitutes for filling milk, butter, ghee, oil and other fatty and non-fatty liquid foods. These are easy to handle and easily portable than heavy big size conventional container. Pouches are the containers of new generation technology with so many advantageous factors like cheap in price, flexible for handling, easily disposable, hygienically tested. Packaging market size in India is about Rs 60 bn. Market size of PET/BOPP and other flexible film-based manufacturing segment is estimated at around Rs 25 bn. The cost impact of PET film and BOPP film on the overall packaging cost ranges from 35-85% depending on the product to be packaged. The total installed capacity of the flexible packaging film industry is around 175,000 tonnes a year. The domestic demand is of the order of 177,000 tonnes including exports (of about 50%). The domestic polyester manufacturers include Garware Polyester (23,000 tpa), Ester Industries (18,000 tpa), MTZ Polyester (12,000 tpa), Jindal Polyester (12,000 tpa), Venlon Polyester (2,500 tpa) and SRF's Polyester (3,500 tpa). Few Indian Major players are as under: 3D Technopack Ltd. Biax Speciality Films Pvt. Ltd. Bonanza Biotech Ltd. Cosmo Films Ltd. Creative Wares Ltd. E-Wha Foam India Ltd. Flowmore Polyesters Ltd. [Erstwhile] Glory Polyfilms Ltd. Gurukrupa Polyplast Ltd. Hind C-Bay Webtech Ltd. India Coffee & Tea Distributing Co. Ltd. Jindal Poly Films Ltd. Kemp & Co. Ltd. M P Polypropylene Ltd. Marvel Industries Ltd. Max India Ltd. Maxxon India Ltd. [Erstwhile] Multi-Flex Lami-Print Ltd. Nova Flexipack Ltd. Positive Packaging Inds. Ltd. R T Packaging Ltd. Radiant Rotogravure Ltd. Ras Propack Lamipack Ltd. Rexor India Ltd. Sampark Industries Ltd. Sharp Industries Ltd. Shivalik Agro Poly Products Ltd. Shree Rama Multi-Tech Ltd. Strapex Packaging India Ltd. Sushil Packagings (India) Ltd. Vinyoflex Ltd. Xpro India Ltd.
Plant capacity: 1200 MT/AnnumPlant & machinery: 128 Lakhs
Working capital: -T.C.I: 477 Lakhs
Return: 46.00%Break even: 33.00%
Add to Inquiry Add to Inquiry Basket

HOLIDAY RESORT (THREE STAR GRADE) - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout,Cost of Project

Tourism as an industry has been flourishing and growing since time immemorial, but it has been in the last few decades that specific attention has started to be given to this smokeless industry. Tourism has emerged as an important as well as organized industry which scattered its benefits over large segments of the population. Destination resort is a resort that contains, in and of itself, the necessary guest attraction capabilities that is to say that a destination resort does not need to be near a destination (town, historic site, theme park, or other) to attract its public. Consequently, another characteristic of a destination resort is that it offers food, drink, lodging, sports, entertainment, and shopping within the facility so that guests have no need to leave the facility throughout their stay. Commonly these facilities are of higher quality than would be expected if one were to stay at a hotel or eat in a town's restaurants. In India there is a very good gap of availability of holiday resorts in different place of India. There is good scope of holiday resorts due to demand of more and more hotel rooms to accommodate the foreign as well as domestic tourists. Arrival of foreign tourist has increased by 8-10%. India is seen as a potential country for such developments and awareness is the requisite to start the process. The vacation ownership is growing at a compound annual growth rate of 20 per cent for the last three to four years and has become the reason for resort developments in India. The market for timeshare models is huge and more importantly, domestic traffic is adopting the lifestyle that supports the timeshare model. India is in an embryonic stage of development in innovative product models for vacation ownership real estate developments. Few Indian Major Players are as under: Costplus Credit Capital Ltd. Mahindra Holidays & Resorts India Ltd. Prajay Engineers Syndicate Ltd. South Indian Concerns Ltd. Sterling Holiday Resorts (India) Ltd.
Plant capacity: 27 Rooms, (3 Cottages, 16 Deluxe & 8 Suits)Plant & machinery: 631 Lakhs
Working capital: -T.C.I: 945 Lakhs
Return: 45.00%Break even: 35.00%
Add to Inquiry Add to Inquiry Basket

BIOPESTICIDES(Trichoderma Harzianum, Pseudomonas Fluorescens, Beauveria Bassiana) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials

Biopesticides or natural pesticides are reduced-risk products derived or developed from biological or naturally derived chemistry. Biopesticides offer value to users by providing a combination of both effective performance and product safety. Most people think biopesticides are only for organic production but they are very good tools for organics, but more than 80 percent of the biopesticides are used in conventional agriculture, rotated and tank-mixed just like any other product. Trichoderma is a fungus which is present in nearly all soils and other diverse habitats. They attack and parasitize other fungi. So far, Trichoderma has been successful in controlling every plant pathogenic fungus against which it has been used. Pseudomonas fluorescence is a Bacteria that is used as a pesticide for controlling many kinds of fungus, virus & bacterial diseases. Residues of the bacteria are not expected to remain on treated food or feed. Available information indicates that use of pseudomonas fluorescence as a pesticides is not expected to adversely affect people or the environment. Beauveria bassiana is a naturally occurring fungus in soils throughout the world. It is most effective against lepidopteron Caterpillar Pest of Vegetables and fruit plants and sucking pests like mites and spiders of vegetables and flowers, Colorado beetle of potato. It is also highly effective against rice hispa. The Indian industry has been focusing sharply on integrated crop management (ICM), increasing exports of genuine pesticides and concentrating on farmer friendly activities. With the global market likely to grow by over 50% to around $27 bn by 2005 from $17.5 bn, there are encouraging prospects for the Indian pesticides industry. The pesticide industry is targeting a 10% share of global pesticides market and has been working on the ICM programme to introduce safer applications, spray devices and crop protection through balanced use of biological and chemical pesticides. The exports cover pesticide intermediates. Pesticides export from India was growing at the rate of 15% and is expected to witness a more accelerated growth. In India Market Prospects for biopesticides are good. Consumption of biopesticides is increasing day by day. Most of the biopesticides find use in public health, except a few that are used in agriculture. 85% of the biopesticides used are neem based products. Improvements in primary production are a first step to achieve higher safety in the long run. So, there is wide scope for new entrepreneurs to venture into this project. Few Indian Major Players are as under: E P I C Enzymes, Pharmaceuticals & Indl. Chemicals Ltd. Godrej Agrovet Ltd. Karapur Agro Ltd. Mountain Spices Ltd.
Plant capacity: 100 MT/Annum, 50 MT/Annum (Trichodarma), 30 MT/Annum (Pseudomonas), 20 MT/Annum (Beauveria)Plant & machinery: 78 Lakhs
Working capital: -T.C.I: Cost of Project : 413 Lakhs
Return: 41.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

WHOLE SPICES PROCESSING (Cleaning / Grinding & Packaging)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Spices constitute an important group of agricultural commodities which are virtually indispensable in the culinary art. Spices are natural products widely accepted by consumers. Spices are most important constituents of Indian food and cuisines, and are used not only for house hold purpose, but also in hotels, restaurants, eateries and food processing industries. Separate the spices from any larger contaminants, such as stones, dust, leaves or sticks. Then wash it with clean water until the water ceases to have any trace of dust or dirt in it. Only portable water can be used for all cleaning purpose. Grind those spices that you are going to use soon and store them well. It also adds value to the end product. If you don’t store them properly, the spice’s flavour may escape and the result is less savory. Pack the whole spices as per the requirements in PP gunny bags. If humidity is high and the spice is whole, you can store the spice in sacks. Spices are used in the variety of food preparation for making palatable taste and good appearance. It may be used some times for the preparation different drug base & natural colour. Oil from spices some times used for the manufacturing of different insecticides. India is the world’s largest producer and exporter of range of raw and processed spices. India leads in cumin, chilly and turmeric production in the world. India is likely to emerge as a leading global spice processing hub in about 10 years spice board. India’s spice exports, expected to amount to $ 875 million in the current fiscal, will breach the $ 1 billion mark next year. The government is also keen on increasing value-addition in spices. The scope for this product is very bright. Thus, a new entrepreneur can confidently venture into this project will find it a very lucrative. Few Indian Major Players are as under: A D F Foods Ltd. A V T Mccormick Ingrediants Pvt. Ltd. A V T Natural Products Ltd. A V Thomas International Ltd. Allanasons Ltd. Bhagat International Pvt. Ltd. Chordia Food Products Ltd. Devon Foods Ltd. Dharampal Satyapal Ltd. Eastern Overseas Ltd. Empire Spices & Foods Ltd. Global Green Co. Ltd. Harmony Spices Ltd. Indana Spices & Food Inds. Ltd. Indian Products Ltd. Indospin Filati Ltd. Kedar Spices Ltd. Kerala Cardamom Processing & Mktg. Co. Ltd. Kerala State Civil Supplies Corpn. Ltd. M T R Foods Ltd. Madhur Industries Ltd. Mas Enterprises Ltd. Om Oil & Flour Mills Ltd. Pals Industries Ltd. Rathi Oils Ltd. Shalimar Chemical Works Ltd. V A M Commercial Co. Ltd. Vishal Lakto (India) Ltd.
Plant capacity: 105000 Kgs./Annum Black Pepper, Cumin, Coriander, Chilly, Ginger, Turmeric & Fenugreek Each 50 Kgs/Day.Plant & machinery: 15 Lakhs
Working capital: -T.C.I: 37 Lakhs
Return: 42.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

TISSUE CULTURE LABORATORY (for Production of Potato Seeds)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Plant Layout

Potato is probably the most popular food item in the Indian diet and India is one of the largest producers of potato. It is grown all over the country with Uttar Pradesh growing the maximum quantity. Looking to the estimated demand of nearly 50 million tonne of potato by 2020, for a nearly 1.3 million population, the production and productivity will keep rising. Potato requires incessant efforts to meet the ever increasing demand of the growing population of the country. In all the potato growing regions the availability of high quality clean seed tuber has been the most limiting factor owing to the conventional clonal propagation that favors disease build-up that drastically reduces yield. Seed alone accounts for 40-50% of the total cost of the cultivation, hence quality seed is a vital input for obtaining high yields. In recent years biotechnology has opened up new frontiers in crop improvement and tissue culture is one of such techniques which have been successfully employed for micropropagation of elite virus free plant material. The potato, mainly due to its amenability for micropropagation has moved it from test tubes to field. Availability of quality planting material/seed of potato is a major constraint now days. Central Potato Research Institute, Shimla (CPRI) has been producing seeds. A few private companies are also engaged in potato seed production through biotechnological methods but this quantity is not sufficient to meet the growing demand. Moreover, due to demand driven market of seeds the farmers are often burdened with higher price. It is estimated that the country requires 0.8 million (8 lakh) tonnes of potato seed every year to produce targeted 7.08 million (70, 80,000) tonnes of potato as envisaged by the DAE for this year. In order to reduce the demand –supply gap, micropagation by shoot culture technique is used for the mass propagation of potato. This method is used as a control approach to viral and bacterial diseases which are commonly spread through propagative materials. Micropropagated plants are observed to establish more quickly, grow more vigorously and are taller, have a shorter and more uniform production cycle, and produce higher yields than conventional propagules. Tissue culture (TC) is the cultivation of plant cells, tissues, or organs on specially formulated nutrient media. Under the right conditions, an entire plant can be regenerated from a single cell. Plant tissue culture is a technique that has been around for more than 30 years. Throughout the world, thousands of laboratories apply plant tissue-culture technology to crops, ornamental plants and endangered plant species. In the late 1970's, the technology for large scale tissue culture was refined for potato production. Today, almost all seed potato production systems incorporate this technology in some way. The produce from fields ultimately translates into high volumes of quality seed potatoes at competitive prices. Tissue culture is seen as an important technology for developing countries for the production of disease-free, high quality planting material and the rapid production of many uniform plants. Tissue culture technology will make it possible for farmers to have access to the following such as large quantities of superior clean planting materials that are early maturing and higher annual yield per unit of land (20-30 tons per hectare against 5-10 tons) previously realized with conventional material. A standard tissue culture laboratory should have the provision and facilities for washing and storage of glassware; preparation of sterilized nutrient media and its storage; aseptic conditions for preparation and inoculation of plant material and maintenance of culture under controlled conditions. The cost involved to establish a tissue culture laboratory is so high that it restricts investments by an entrepreneur. Therefore, a new infrastructure setup can get support from the Govt. under the scheme “assistance under National Horticulture Mission, setting up new tissue culture unit” which extends financial support under different heads. There is a good scope and opportunity for new entrepreneurs to venture into this field.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 12 of 220 | Total 2192 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 219 220   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top