Best Business Opportunities in Meghalaya- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Meghalaya is a state in north-east India. The name means "the abode of clouds" in Sanskrit. As of 2011, the state has a population of 2,964,007 and is the 23rd most populous in the country. The population of Meghalaya as of 2014 is estimated to be 3,211,474. Meghalaya covers an area of approximately 22,430 square kilometers, with a length to breadth ratio of about 3:1

Meghalaya is predominantly an agrarian economy. Agriculture and allied activities engage nearly two-thirds of the total work force in Meghalaya. However, the contribution of this sector to the State's NSDP is only about one-third. Agriculture in the state is characterized by low productivity and unsustainable farm practices. Despite the large percentage of population engaged in agriculture, the state imports food from other Indian states.


 Meghalaya has some of the thickest surviving forests in the country and therefore constitutes one of the most important ecotourism circuit’s in India. The Meghalaya subtropical forests support a vast variety of flora and fauna. Meghalaya has 2 National Parks and 3 Wildlife Sanctuaries.   Meghalaya also offers many adventure tourism opportunities in the form of mountaineering, rock climbing, and trekking and hiking, water sports etc. The state offers several trekking routes, some of which also afford an opportunity to encounter rare animals such as slow loris, assorted deer and bear. The Umiam Lake has a water sports complex with facilities such as rowboats, paddleboats, sailing boats, cruise-boats, water-scooters and speedboats. Tourism in India is a growing industry, and as per World Tourism Organization predictions, India will be a leader in using tourism as an employment generator. The State of Meghalaya must be placed in a strategic position to take advantage of this growth.

“MEGHALAYA TOURISM DEVELOPMENT CORPORATION” has been set up for developing and promotion of Tourism in Meghalaya. The Corporation shall make efforts to increase its revenue to enable to carry out promotional activities. MTDC will organize package tours not only to Cherrapunjee but to other tourist destinations; organize training for guides, etc.


The New Industrial & Investment Promotion Policy is designed to facilitate investments in new sectors across the State and thus ensure accelerated and sustained growth. The Policy focuses to attract, facilitate and promote wider expectations and high end investment.

There is an urgent need to promote investment in backward and difficult but resource rich areas. Therefore the policy provides additional incentives and support for such investments.


•        To promote investment in all sectors

•        Generate employment opportunities for the local people in the industries and allied sectors.

•        To provide special incentives for promoting local Entrepreneurs in setting up of micro, small & medium manufacturing and service enterprises.

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage.

•        Achieve a balanced and growth oriented development covering the entire state through promotion of village and small scale industries.

•        Encourage need based development of local entrepreneurial skills through intensive motivation and training programmes at District, Sub-division and Block levels.

•        Provide guidance to prospective entrepreneurs by building up a data bank of project-profiles and other connected information. Special support to local entrepreneurs will be provided, and monitoring will be done to enable them to be successful.

•        Simplify rules and procedures by providing a single-window clearance facility for all investment proposals as applicable.

•        Promote Tourism, and make Meghalaya a tourist destination.

•        Promote IT as industries.

•        Promote first generation entrepreneurs. Government will encourage setting up of Entrepreneurship Development Institute by private or in PPP mode.


•        State Government believes in promoting private enterprises for speedy economic development of the State. The Government also stands committed to ensuring the healthy growth of existing industries. For this purpose, Government will ensure optimum number of industries by not permitting excess in any specific sector, thereby ensuring sustainability of existing business.

•        Enterprises promoted and managed by “Woman Entrepreneur”/physically challenged will get additional 10 % (ten percent) incentives on the State Capital Investment Subsidy.

•        Meghalaya has a long international border which needs immediate attention for development. To address this issue, 10 Kms towards the State from the International border is declared as “PRIORITY AREA” and enterprises set up within the 10 Kms area will be given special incentives to be known as “Border Area Subsidy”.

•        Government of Meghalaya recognizes:

1.       Hotels (not below two star category) and Amusement Parks.

2.       Medical and health services in the nature of nursing homes with a minimum capacity of 25 beds and Super – Specialty Health Care.

3.       Vocational training Institutes.


                    Agro Based Industries :

   Horticulture – Based Units

   Biotechnology Based Units

   Medicinal Plants, Tea and Rubber

                       Animal Husbandry and Meat Processing Industries

         Development of Mineral based Industries:

      Coal-Based Industries

     Limestone Based Industries- Cement Plants, Lime Plants,

                      Calcium Carbide   Plants.

                       Electronics & Information Technology


•        For large and medium scale industries, there are subsidies like capital investment subsidy, interest subsidy, power subsidy, subsidy on cost of pollution/quality-control measures, special subsidy for pioneer units in backward areas etc.

•        Exemption from the payment of applicable service tax for seven years to a "Tourism Unit"

•        Sales Tax exemption on sale of finished products for a period of seven years from the date of commercial production.

•        Reimbursement of Central Sales Tax (CST) paid on purchase of Capital Equipment installed till the date of project commissioning.

•        Partial exemption for applicable stamp duty.


Meghalaya Government has always endeavored to set up the right kind of business climate to motivate investments in the State. In order to attract investment to the various sectors and thus contribute to the development of the economy as a whole.

The major being the industrial policy, which had been announced with a view to take advantage of the liberalized economic scenario in the country and also to keep pace with development in the national industrial sector are-

•        Generate employment opportunities for the local people in the industries and allied sectors

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage. Create a conducive environment for industrial development by creation of the basic Infrastructural facilities and by setting up of industrial areas, growth centre and export promotion industrial park.

•        Provide preference to local Entrepreneurship in setting up of large, medium and small-scale units.

•        Promote local interests through joint ventures with external investors so as to facilitate technology transfer and capital flow by a package of suitable incentives.

•        Encourage setting up of export-oriented, Agro based, Mineral-based, Horticultural based and Electronic units as thrust area.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 51 of 57 | Total 562 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 51 56 57   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Nuts & Bolts (M.S. Fasteners)

A fastener is a connective mechanism that mechanically joins or affixes two or more objects together. A bolt is an externally threaded fastener designed for insertion through holes in assembled parts, and is normally intended to be tightened or released by torquing a nut. A nut is a type of hardware fastener with a threaded hole nuts and bolts are manufactured from alloy steels having high tensile strength and resistant to continuous wear and tear. Bolt is cylindrical piece of metal that fasten objects together. Bolts and nuts can be zinc or cadmium plating to resist corrosion. Bolt and nut are used to fasten together loose parts mainly in industries and workshops. Nut is device, which rolls on these threads. In nuts internal threading is done through the combination of nuts and bolts combination into appropriate sizes. Screw demonstrates their true merit in smooth movements, during assembly etc. Nuts and Bolts are available in various sizes and shapes. The kind of the classification of bolts and nuts may broadly be those made by the cold and hot process plant. Nuts are plain, square or hexagonal in shape with flat chambered, or washer crowned top. Bolts, nuts may be finished or unfinished, and may be regular or heavy type. Fasteners mainly cover nuts, bolts, screws, studs and rivets and are segmented between MS (mild steel) and HT (high tensile) fasteners. These fasteners are used in engineering systems.The overall fasteners market is estimated at about Rs 28 bn. While the organized sector (HT fasteners) has a share of 65%, the balance of 35% is shared by unorganized sector and imports. In fact there isno assembly complete without fasteners. The automotive industry is the largest end-user of fasteners with the remaining demand coming from sectors like textile machinery, railway locomotives, construction, computer hardware and general engineering. Industrial fasteners, accounting for 40% of the total demand, are more oriented towards the retail markets. Original Equipment Manufacture (OEM) segment is mainly dominated by organized players due to high intensity of capital and technology. As the sectors mentioned above use fasteners extensively and there is a vast replacement market spread across the country, hence the scope of venturing to this sector is highly promising. Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian major players are as under • A V R Fasteners Pvt. Ltd. • Adinath Forging Pvt. Ltd. • Agarwal Bolts Ltd. • Agarwal Fasteners Pvt. Ltd. • Atul Fasteners Pvt. Ltd. • Deepak Fasteners Ltd. • Dev Fasteners Ltd.
Plant capacity: Mild Steel/HT Bolts: 625 Kgs. /DayMild Steel/HT Nuts: 125 Kgs. /DayPlant & machinery: 33 lakhs
Working capital: -T.C.I: Cost of Project : Rs 54 lakhs
Return: 27.00%Break even: 71.00%
Add to Inquiry Add to Inquiry Basket

Wood Plastic Composite (WPC)

WPCs are composites containing a wood component in particle form (wood particles/wood flour) and a polymer matrix. They are used in a variety of structural and non-structural applications ranging from component and product prototyping to outdoor decking. Wood plastic composites (WPCs) are roughly 50:50 mixtures of thermoplastic polymers and small wood particles. WPCs can be formed into almost any shape and thus are used for a wide variety of applications, including windows, door frames, interior panels in cars, railings, fences, landscaping timbers, cladding and siding, park benches, molding and furniture.This product is part of the composites to be named wood polymer composite (WPC), wood fiber composite (WFC), poly wood and pall wood, poly board, wood flex, stock wood and wood plastic. WPC is manufactured by dispersing wood particles into molten plastic with coupling agent or additives to form composite material through various techniques of processing such as extrusion, compression or injection molding. The majority of WPCs are manufactured by profile extrusion, in which molten composite material is forced through a die to make a continuous profile of the desired shape. Wood plastic composites are an important and growing segment of the forest products industry. This industry segment has grown in double digit percentages annually for the past decade. In North America, the WPC market has been dominated by rail and decking products while in Europe more emphasis has been placed on automotive applications. The wood plastic composite market is projected to grow from $ 2579.90 million in last year to $4,601.7 million by 2019, with a CAGR of 12.2%. Automotive industry is the most crucial sector in the Europe and accounts over 4% of European GDP. Germany dominated the premium car production in 2015 accounting over 40% of the total market. As a whole any entrepreneur can venture in this project without risk and earn profit.
Plant capacity: 4800 Kgs /DayPlant & machinery: 146 lakhs
Working capital: -T.C.I: Cost of Project: 391 lakhs
Return: 27.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

HDPE/PP Woven Fabric

Woven is a method by many threads or tapes woven in two directions (warp and weft), to form a fabric for plastic industry needs. In the plastic woven industry, with a plastic film is drawn into filaments, woven into fabric/sheet/cloth. Woven polypropylene is a great fabric to print on and can be choose normal easy printing such as simple brand text and image with three colors, also full color printing with BOPP lamination. HDPE/PP Woven Fabrics are used in various end applications like Grain & Pulses Bags, Foods & Spices Bags, Animal Food Bags and Fertilizers& Chemical Bags etc. Woven fabric is a textile formed by weaving. It is produced on a loom, and made of many threads woven on a warp and a weft. As use of technical textiles is dictated by need, its pricing normally offers good margins. Flexible Intermediate Bulk Containers (FIBC's): The FIBC is a large bag made of woven polypropylene (PP) fabric that is usually extrusion coated to provide additional barrier and leak-proofness. The bag is constructed by stitching the bag and adding accessories like handles or straps/loops to facilitate mechanized handling. Indian FIBC industry is estimated to be about 125,000 MT per year valued at some Rs. 1,350 crores. It has registered a compounded annual growth rate of 15-20 percent over the last 10 years. The demand is growing at around 16-17% YoY for the last three years. Forecasts indicate that this demand in India is likely to increase and reach around 1.5 Mil tones by 2013-14. As a whole entrepreneur can venture in this field will be successful. Few Indian major players are as under • Abdos Polymers Ltd. • Agarwal Polysacks Pvt. Ltd. • Ambica Fab Design Pvt. Ltd. • Anya Polytech & Fertilizers Pvt. Ltd. • Ashoka Poly Laminators Ltd. • Bardanwala Plastics Pvt. Ltd.
Plant capacity: 8.4 MT/DayPlant & machinery: 500 lakhs
Working capital: -T.C.I: Cost of Project: Rs 923 lakhs
Return: 28.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

NPK Compound Fertilizer (Granular Type)

Fertilizers are soil amendments applied to promote plant growth, the main nutrients added in fertilizer are nitrogen, phosphorus, potassium and other nutrients are added in smaller amounts. Collectively, the main nutrients vital to plants by weight are called macronutrients, including: nitrogen (N), phosphorus (P), and potassium (K) (i.e. N- P-K). NPK ratings consist of three numbers separated by dashes (e.g., 10-10-10 or 16-4-8) describing the chemical content of fertilizers. The first number represents the percentage of nitrogen in the product; the second number, P2O5 the third, K2O. Fertilizers do not actually contain P2O5 or K2O, but the system is a conventional shorthand for the amount of the phosphorus (P) or potassium (K) in a fertilizer. A 50-pound (23 kg) bag of fertilizer labeled 16-4-8 contains 8 lb (3.6 kg) of nitrogen (16% of the 50 pounds), an amount of phosphorus equivalent to that in 2 pounds of P2O5 (4% of 50 pounds), and 4 pounds of K2O (8% of 50 pounds). Compound fertilizers are N-P-K fertilizers with other elements purposely intermixed. Fertilizers are classified according to the content of these three elements. Labeling is according to relative amounts of each of the three elements by weight (i.e., mass fraction). The development of the agriculture sector and improvement of the living standards of small-scale farmers are priorities of the Government of Malaysia. A higher level of agricultural production requires an increased and/or more efficient use of inputs, especially fertilizers. The main sources of imported urea were from Indonesia (54.5% valued at RM 286.1 million), China (21.0% valued at RM110.2 million). Urea export by Malaysia, has been trending upward since 2004 (RM492.0 million) to 2008 (RM 900.0 million). The major importing countries of Malaysian urea in 2008 were 8 Thailand (32.5%), Australia (26.8%), Japan (13.5%), India (14.0%) and the Philippines (6.0%). The global trade in NPKs grew from 13mn t in 2010 to16mn t in 2016.Russia has continued to increase export capacity, Moroccan NPK exports leapt from 74kt in 2013 to 840kt by 2016,Belarus NPK exports have also grown strongly from around 250kt in 2009/10 to 800kt in 2016.
Plant capacity: 400 Mt/DayPlant & machinery: 2613 lakhs
Working capital: -T.C.I: Cost of Project: Rs 5581 lakhs
Return: 27.00%Break even: 72.00%
Add to Inquiry Add to Inquiry Basket

Power Transformer

A transformer is a device that transfers electrical energy from one circuit to another through inductively coupled conductors—the transformer's coils. A varying current in the first or primary winding creates a varying magnetic flux in the transformer's core and thus a varying magnetic field through the secondary winding. This varying magnetic field induces a varying electromotive force (EMF), or "voltage", in the secondary winding. This effect is called inductive. Transformers range in size from a thumbnail-sized coupling transformer hidden inside a stage microphone to huge units weighing hundreds of tons used to interconnect portions of power grids. A transformer is a device for transferring energy in a system from one circuit to another. It consists of two independent electric circuits linked with a common magnetic circuit. This energy at low voltage may be transformed to energy at high voltage, or vice versa. In the like manner, current of a given value in one circuit may be transformed into current of another value in a different circuit. Transformers having more than one primary or secondary winding etc. Power transformers are devices that facilitate transfer of power between electrical networks of different voltages. The global power transformers market was estimated to be 11,352 units in 2013 and is expected to reach 16,994 units by 2020, at a CAGR of 5.9% from 2014 to 2020. In terms of revenue, the market is expected to grow from USD 18.55 billion in 2013 to USD 28.22 billion in 2020 at a CAGR of 6.2% from 2014 to 2020. India is known to be an active supplier of transformers to nations worldwide. According to recently published TechSci Research report "India Power and Distribution Transformers Market Forecast and Opportunities, 2020" the market for power and distribution transformers in India is projected to grow at a CAGR of 10.5% during 2015-20. Transformer Market in India had estimated that over 400 GVA of transformer capacity out of the total installed capacity of 1040 GVA would require repair/retrofit/ replacement (as of 2012) and the number is slated to increase to 1548 GVA by 2020 out of estimated installed base of 1548 GVA. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under • Aditya Vidyut Appliances Ltd. • Alfa Transformers Ltd. • Altair Electronics Ltd. • Apex Electricals Ltd. • B R G Energy Ltd. • Bharat Bijlee Ltd. • Calcom Vision Ltd.
Plant capacity: Power Transformer(132/33 KV, 50 MVA Core Type Oil Cooled): 50 Nos. /annumPlant & machinery: 224 lakhs
Working capital: -T.C.I: Cost of Project:1043 lakhs
Return: 29.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Polymer Pencil

A pencil is a writing instrument or art medium constructed of a narrow, solid pigment core inside a protective casing which prevents the core from being broken and/or from leaving marks on the user’s hand during use. Most pencil cores are made of graphite mixed with a clay binder which leaves grey or black marks that can be easily erased. Polymer graphite's superior mechanical property allows for a wide variety of sizes for mechanical pencils, 0.3mm, 0.5mm, 0.7mm, and 0.9mm being commonly available. Graphite pencils are used for both writing and drawing and result in durable markings. According to the different grades, there is a variety of HB, B, 2B, 3B, 4B, 5B, 6B, 7B, 8B, 9B, and 10B. Writing, drawing, sketching, coloring and shading is the basic applications of the wooden pencil. The market for writing instruments in India is estimated at 1600 to 2400 million pieces a year. The total market for writing instruments is estimated at Rs 22 billion in value and is growing at around 8 to 10% annually. Major Indian players in the ballpoint pen market are Cello, Lexi, Reynolds, Luxor, Flair, Montex, Todays, Linc and so on. Out of these, Cello, Lexi and Reynolds have a major share of the market. There is a growing demand of polymer pencil in the market. The products find application in schools, colleges, government offices, commercial establishments, NGOs and miscellaneous activities. According to the type of carbon used, pencils are classified as soft, medium and hard. There is no doubt about the acceptability of the product and lead pencils still command a respectful demand. The product has a good export potential also. Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian major players are as under • Add Pens Pvt. Ltd. • Excella Pencils Ltd. • Hindustan Pencils Pvt. Ltd. • Luxor Writing Instruments Pvt. Ltd. • Model Sales Agency Ltd. • Ravlon Pen Co. Ltd. • Reynolds Pens India Pvt. Ltd.
Plant capacity: 67 Th. Pcs. /dayPlant & machinery: 116 lakhs
Working capital: -T.C.I: Cost of Project: 282 lakhs
Return: 27.00%Break even: 71.00%
Add to Inquiry Add to Inquiry Basket

Herbal Body Care Beauty Products

Natural skin care uses topical creams and lotions made of ingredients available in nature. Much of the recent literature reviews plant-derived ingredients, which may include herbs, roots, flowers and essential oils, but natural substances in skin care products include animal-derived products such as beeswax, and minerals. The herbal bathing powder is full of natural products. It can be used as a scrub as well as an exfoliator. On regular use, it helps to get rid of facial hair. Cost-effective the ingredients used in this herbal shampoo are very pocket friendly when it comes to price to prepare a bottle of this shampoo. Easily Available All ingredients used in this herbal shampoo are easily available in the market. Hair conditioner is a hair care product that changes the texture and appearance of hair. Hair conditioner is often a viscous liquid that is applied and massaged into the hair. Hair conditioner is usually used after washing the hair with shampoo. Herbal natural soap ingredients are an easy and inexpensive way to add color and texture to soaps. Additives like Annatto, Alkanet, Comfrey, Indigo, Rattan jot and Silk make soap making feel a little more exotic. Indian consumers are more inclined towards natural and herbal cosmetic products. The herbal cosmetics industry is expected to grow at a rate of 12% in India. According to a recent report by Research and Markets named “India Cosmetic Market Overview” (November 2016), the country’s cosmetic market was growing with a CAGR of 17.06% over a period of five years. In 2016, the market size of India’s beauty, cosmetic and grooming market was USD6.5 billion and is expected to reach USD20 billion by 2025, according to a report by Assocham (2016). The report also indicates that the workforce requirement will grow to 12.1 million in 2022 from that of 3.4 million in 2013. Herbal skin market has increased from INR ~ million in FY’2011 to INR ~ Million in FY’2016. Herbal skin market is dominated by herbal face wash market with the market share of ~% in FY’2016. We actively encourage a culture of innovation, which facilitates the development of new technologies and ensure a high quality product. Few Indian major players are as under • Abdos Oils Pvt. Ltd. • Aquagel Chemicals Pvt. Ltd. • Arochem Silvassa Ltd. • Cholayil Pvt. Ltd. • Ecof Industries Pvt. Ltd. • Eternis Fine Chemicals Ltd. • Evershine Oleochem Ltd. • Fresno & Bakersfield India Ltd. • Galaxy Surfactants Ltd.
Plant capacity: Herbal Body Care Beauty Products(Herbal Body Wash, Shampoo,Hair Conditioners, Soaps,Lotions and Scrubs):500 Kgs. /Day (each itemPlant & machinery: 65 lakhs
Working capital: -T.C.I: Cost of Project: 542 lakhs
Return: 35.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

School (CBSE Pattern)

The importance of education was well recognized in India, ‘Swadeshepujyate raja, vidwansarvatrapujyate’ “A king is honoured only in his own country, but one who is learned is honoured throughout the world." A school is an institution designed to provide learning spaces and learning environments for the teaching of students under the direction of teachers. There are two types of school that is primary school for young children and secondary school for teenagers who have completed primary education. There are various boards of schools in India, namely Central Board for Secondary Education (CBSE), Council for the Indian School Certificate Examinations (CISCE), Madrasa Boards of various states, Matriculation Boards of various states, State Boards of various boards, Anglo Indian Board, and so on. The typical syllabus today includes Language(s), Mathematics, Science — Physics, Chemistry, Biology, Geography, History, General Knowledge, Information Technology/Computer Science etc..Extracurricular activities include physical education/sports and cultural activities like music, choreography, painting, theater/drama etc. The CBSE envisions a robust, vibrant and holistic school education that will engender excellence in every sphere of human endeavor. There has been massive expansion of school education in India in the last few decades. There are 15 lakh schools in the country as per DISE data for 2014-15. Government owns and manages nearly 75% of elementary, 43% of secondary and 40% of higher secondary schools, the remaining are privately owned and managed. There are 25.95 crore children enrolled in school education, including 19.77 crore at elementary level; 3.83 crore at secondary level; and 2.35 crore at higher secondary level (U-DISE 2014-15). A comprehensive National Policy for Skill Development and Entrepreneurship was formulated in 2015 and a Mission was set up by Government of India, with the objective of training 40 crore people by 2022. We actively encourage a culture of innovation, which facilitates the development of new technologies and ensure a high quality product. Few Indian major players are as under • Smt. Sulochanadevi Singhania School, Thane, Mumbai • The Shri Ram School, VasantVihar/ Moulsari, Delhi/Gurgaon • Mallya Aditi International School, Bangalore • Vasant Valley School, Delhi • The Cathedral and John Connon School, Mumbai • Sanskriti School, Chanakyapuri, Delhi
Plant capacity: KG to 12th Standard Students: 2000 Students/AnnumPlant & machinery: 63 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1098 lakhs
Return: 13.00%Break even: 47.00%
Add to Inquiry Add to Inquiry Basket

Milk Processing (Milk, Paneer, Butter and Ghee)

The growth of the ultra high temperature (UHT) sterilization process of milk has been tremendous for the last two decades all over the world. The advantages of UHT milk for these countries are possible reductions in transport, distribution and storage costs and the control of regional and seasonal fluctuations in production. The total amount of milk fat used in this country as a food in these various form amounts to approximately 4 billion pounds annually. The laws of most of the states and of the United States require that butter must contain at least 80 per cent of milk fat. In additional normal butter contains a little less than 1 per cent of cur and it may contain added salt. Paneer contains a host of nutrients like calcium, protein, phosphorus, zinc, vitamin A and vitamin B12. The demand of the milk & milk Products increase day by day to meet the demand it is necessary to set up the milk and milk products processing plant. Area of the project and area profile (how the key activity suitable for the area and the people) Area of the project will be from milk man/Dairy Farm House – Milk in the process plant – Store – Market From nearby villages – milk man collect milk in the milk storage Tank – factory – milk is gone through different process section – process milk – store in the cold store – dealers – differ outlet retailers shop – public use section. The processing market in India is expected to grow at a CAGR of 20.5% over FY 2015 to FY 2020. Milk Processing Industry in India 2017, several established milk processing companies are looking to further expand their business and are looking to raise funds through IPOs. This will further aid in the development of the country's milk processing industry. As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian major players are as under • Amrit Corporation Ltd., • Anik Industries Ltd., • Hatsun Agro Product Ltd., • Nestle India Ltd., • Kwality Ltd. • Cream line Dairy Products Ltd.
Plant capacity: Pasteurised Milk (1 Ltr Pouch):1000 Kgs/day Skimmed Milk (1 Ltr Pouch):3500 Kgs/dayPaneer:1000 Kgs/day Butter Plant & machinery: 204 lakhs
Working capital: -T.C.I: Cost of Project: Rs 519 lakhs
Return: 15.00%Break even: 73.00%
Add to Inquiry Add to Inquiry Basket

Surgical Cotton

Cotton is a soft, staple fiber that grows in a form known as a boll around the seeds of the cotton plant, as shrub native to tropical and subtropical regions around the world, including the Americas, India and Africa. Surgical cotton is also known as absorbent cotton” or “cotton wool”. Surgical/Absorbent cotton is cleared de-oiled and bleached cotton packed in different sizes. The fiber of Surgical/Absorbent cotton is very elastic. It consists of 98%-99.5% of cellulose which has a diameter of 16.30 and a length of 12-40 mm. Today, India produces the widest range of cotton; perhaps no other cotton producing country in the world has this distinction. The demand of Surgical Absorbent Cotton is directly related with the increase in population and expansion of public health services. Government hospitals and large nursing homes are the largest consumer for cotton wool. the area under surgical cotton cultivation in India was 97 percent in 1947, it fell to 42 percent in 1990, 28 percent in 2000 and about 1 percent in 2012, and it is now estimated to be much less than 1 percent. Meditech in India is expected to grow at a CAGR of 9.1% from US$ 600 million in 2014 to US$780 million in 2017. As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under • Jajoo Surgicals Pvt. Ltd. • Mohini Fibers Limited • Pradeep Surgical Dressings Pvt. Ltd. • Medicare Healthcare Product • Bafna Healthcare Pvt. Ltd. • BVM Meditech Private Limited
Plant capacity: 1300 Kgs/day Plant & machinery: 191 lakhs
Working capital: -T.C.I: Cost of Project: Rs 278 lakhs
Return: 26.00%Break even: 64.00%
Add to Inquiry Add to Inquiry Basket

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 51 of 57 | Total 562 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 51 56 57   Next »


Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top

Products & Services


Contact Us

My Account


Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search

Search Project Reports & Profiles