Skip to content
WhatsApp us
Request a Quote
Manufacturing ideas

Condom Factory in India: Process, Machinery, Approvals and Setup Cost

condom-factory
Contents 9 sections
  1. How is a condom made in a factory, step by step?
  2. How much does a condom factory cost to set up?
  3. Which machines does a condom plant need?
  4. Which raw materials set a condom factory's margin?
  5. Which approvals does a condom factory need before its first sale?
  6. Who runs the big condom factories in India and abroad?
  7. Tender supply, private label or your own brand: which route fits a new plant?
  8. What to do first if you plan a condom plant
  9. Frequently asked questions

Every condom factory does the same few things: glass formers are dipped twice in centrifuged natural rubber latex, the film is cured in hot-air ovens, and each piece is tested electrically before it is lubricated and sealed in foil. What differs is scale, and scale decides the money. HLL Lifecare, a government-owned company, rates its Peroorkada plant in Kerala at 1,246 million condoms a year. NPCS's illustrative sample for a far smaller plant, 1.2 lakh condoms a day, totals about ₹4.4 crore, while a plant built for tender supply runs to tens of crores.

Latex makes up roughly half the raw material bill, and a manufacturing licence from the central drug regulator is needed before the first sale. The sections below cover the process, machines, approvals and money, so you can judge which size to build.

How is a condom made in a factory, step by step?

The sequence follows the flow in NPCS's condom project report.

1.       Compounding. Latex concentrate is mixed with sulphur, zinc oxide, accelerators and stabilisers, then matured in tanks.

2.       Dipping. Glass formers pass twice through the latex to build a thin film.

3.       Beading and curing. The open end is rolled into a ring and the film is cured in hot-air ovens.

4.       Stripping and leaching. Condoms come off the formers, are washed and tumble-dried.

5.       Electronic testing. Each piece goes on a charged mandrel; pinholes and thin spots are rejected.

6.       Lubricating and foiling. Silicone lubricant goes on and each condom is sealed in aluminium foil.

7.       Lot testing and packing. Lot samples are checked for burst strength, holes and seal integrity.

Only the electronic test touches every piece; burst, hole and seal checks work on lot samples.

How much does a condom factory cost to set up?

NPCS gives two very different answers because they describe different plants. Its indicative range for a tender-scale unit (10 to 100 crore pieces a year) is ₹40 crore to ₹150 crore excluding land. Its sample report sizes a far smaller unit at 1.2 lakh condoms a day, using industry-typical ratios; read it for the shape of the economics, not as a loan quote.

Item

Illustrative sample

How it is worked out

Annual capacity

3.96 crore pieces

1,20,000 a day × 330 working days

Total project cost

₹442.55 lakh

Fixed assets ₹414.65 lakh + pre-operative ₹10.37 lakh + working capital margin ₹17.53 lakh

Plant and machinery

₹244.63 lakh

About 55% of project cost

Year 3 sales

₹557.17 lakh

70% of capacity × ₹2.01 a piece, before GST

Year 3 net profit

₹112.59 lakh

About 20% of sales

Break-even

33.4% of capacity

About 40,000 pieces a day

The sample funds 75% of the cost through a term loan. The ₹2.01 selling price is its own assumption, so test it against recent tender awards. A manufacturing feasibility study replaces these with your own capacity, price and site.

Which machines does a condom plant need?

The dipping line and the electronic testers take about 58% of the sample's machinery budget (₹141.88 lakh of ₹244.63 lakh).

Machine

Sample cost (₹ lakh)

Automatic dipping and vulcanising line

97.85

Electronic pinhole testers

44.03

Lubricating and foil sealing machines

34.25

Compounding and maturation tanks

19.57

Leaching tanks and tumble dryers

14.68

Boiler and hot-air generator

14.68

Quality control lab (airburst tester, ageing oven)

12.23

Chiller, air compressor, utilities

7.34

NPCS observes that many new units start with a plain range and add premium types later, as the sample's double-dip line assumes.

Which raw materials set a condom factory's margin?

In the sample, raw materials cost ₹195.94 lakh in Year 3, which is 35.2% of sales or about 71 paise a condom (₹195.94 lakh over 2.772 crore pieces). Latex and foil laminate make up 72% of that bill, so a price move in either lands directly on margin.

Raw material

Share of raw material cost

Year 3 (₹ lakh)

Centrifuged natural rubber latex concentrate

50%

97.97

Aluminium foil laminate

22%

43.11

Silicone oil lubricant

15%

29.39

Compounding chemicals (sulphur, zinc oxide, accelerators, stabilisers)

8%

15.67

Ammonia and dusting powder

5%

9.80

NPCS lists the latex as coming from Kerala, where PTI reported HLL placed its condom plants because rubber was plentiful. A unit elsewhere pays to bring latex in, so compare plots in the industrial areas in Kerala against your buyers' locations. For the latex end of the chain, see the guide to a rubber processing business.

Which approvals does a condom factory need before its first sale?

Four things:

•        Manufacturing licence. Condoms are a Class C medical device, so the Central Drugs Standard Control Organisation (CDSCO) licenses the plant: Form MD-7 is the application and Form MD-9 the licence.

•        Product standard. Latex condoms are tested to IS/ISO 4074, which the Bureau of Indian Standards lists in its 2015 edition. ISO issued a fourth edition in March 2026, so confirm which edition a buyer's tender cites.

•        Tender prequalification. Many international and some public tenders ask for WHO/UNFPA prequalification, and UNFPA publishes a list of prequalified male condom sites.

•        Environment and registrations. State Pollution Control Board consent is needed before construction and again before production, alongside Udyam, GST and a factory licence.

Who runs the big condom factories in India and abroad?

HLL Lifecare is the scale player in India.

Company

Plants

What the company or the press says

HLL Lifecare (Mini Ratna enterprise, Union Health Ministry)

Peroorkada, Irapuram and Kakkanad in Kerala; Kanagala near Belgaum

221.7 crore condoms a year in total, of which Peroorkada makes 124.6 crore (PTI, July 2025)

Anondita Medicare

Noida for condoms (11 lines); Mathura and Guwahati for gloves

Sells the Cobra brand; says it supplies government family planning and AIDS control programmes in bulk

Cupid Limited

Sinnar MIDC, Nashik

Male and female condoms; says it is WHO/UNFPA prequalified and uses a German-technology dipping line

Karex Berhad

Malaysia and Thailand

About five billion condoms a year from four factories, much of it bulk supply to governments and agencies (New Straits Times, 2018)

Anondita also makes latex gloves, a pairing covered in the guide to hospital rubber sheet and surgical glove manufacturing.

Tender supply, private label or your own brand: which route fits a new plant?

Settle the route before sizing any machine.

•        Tender supply to government and donor programmes. HLL and Anondita both name government family planning and AIDS control programmes as customers.

•        Private label for condom brands. NPCS lists brands buying private-label stock as a buyer type, and a smaller plant can sell this way without a distribution network; the guide to contract manufacturing explains such arrangements.

•        Own brand. Flavoured, dotted and extra-thin variants sell through pharmacies and online retailers, but marketing and distribution need separate funding.

Unless you already hold a distribution channel or a tender-ready team, begin with private label or a small plain-range unit and treat tender scale as phase two. Condoms also sit within the wider pharma manufacturing ideas category.

What to do first if you plan a condom plant

1.       Fix the route and capacity. A small plain range or private label sits near the ₹4.4 crore illustrative scale; tender supply sits in NPCS's ₹40 crore to ₹150 crore range.

2.       Confirm the licence route and standard. Check the device class on the CDSCO classification list and ask target buyers which ISO 4074 edition they cite.

3.       Secure latex before the site, since it is half the raw material cost.

4.       Replace the sample numbers with your own in a detailed project report before approaching a bank.

NPCS has prepared project reports since 1994 under an ISO 9001:2015 certified research process. Its condoms report covers process flow, machinery costs, raw materials, layout and multi-year financials; a lender will still expect your own numbers.

Frequently asked questions

Who owns the biggest condom factory in India?

HLL Lifecare, a Mini Ratna public sector enterprise, going by published figures. Its Peroorkada plant in Kerala, which began in 1969, is rated at 1,246 million condoms a year.

Where are condoms made in India?

Kerala leads on volume among plants with published figures. HLL runs Peroorkada, Irapuram and Kakkanad there, plus Kanagala near Belgaum in Karnataka. Anondita Medicare (Noida) and Cupid Limited (Nashik) are private makers.

Who is the largest condom manufacturer in the world?

Karex Berhad of Malaysia, by volume. The New Straits Times reported in 2018 that it makes about five billion condoms a year from four factories, much of it bulk supply to governments and agencies.

Can a new condom factory work without government tenders?

Yes. NPCS lists condom brands, social marketing groups, pharmacy distributors, online retailers and exporters as buyers beside government programmes.

Diksha Garg

Written by

Diksha GargEntrepreneurship Development and Market Research

Diksha Garg works in entrepreneurship development, industrial operations and market research. She holds a BBA from Rukmini Devi Institute of Advanced Studies and studied at IILM from 2019 to 2021. Her experience includes an executive traineeship at HDFC Bank and a financial analyst internship at Bajaj Allianz. She researches the costs, approvals and market data in these business guides, which are reviewed by NPCS founder Ajay Kumar Gupta.

View profile on LinkedIn

How we write and review

Reviewed by Ajay Kumar Gupta, Founder, Niir Project Consultancy Services (NPCS)

Planning a new manufacturing unit?

NIIR prepares detailed project reports and feasibility studies for new projects. Share your requirement and the team will get in touch.

Call Us WhatsApp