What is a type 4 cylinders project report?
A type 4 cylinders project report is a detailed project report (DPR) for a plant making lightweight composite gas cylinders. The plant winds carbon fibre and epoxy over a plastic liner, for CNG, biogas and hydrogen use. It covers the process, machinery, raw materials, PESO approvals, project cost, finance, five-year projections, DSCR and break-even.
Promoters use it to size the plant and raise a term loan; banks and investors use it to judge whether the plant can carry the approval cost and still repay.
Also known as: Type IV CNG cylinder project report, composite CNG cylinder plant report, carbon fibre gas cylinder DPR, Type 4 cylinder business plan.
Type 4 cylinder manufacturing plant cost and economics
The sample report models a plant making 13 cylinders per day, or 4,290 cylinders a year over 330 working days. It starts at 60% capacity and reaches 80% in Year 5, selling at ₹79,900 per cylinder ex-factory.
Plant and machinery is less than half the project cost. The building takes ₹375.32 lakh because winding, curing and pressure testing each need their own bay, and burst testing needs a protected enclosure.
| Land and site development | 107.56 |
|---|---|
| Building and civil works | 375.32 |
| Plant and machinery | 705.75 |
| Other fixed assets | 99.44 |
| Contingencies | 54.05 |
| Preliminary and pre-operative | 33.55 |
| Working capital margin | 84.11 |
| Total | 1,459.78 |
| Promoter's contribution (25%) | 364.94 |
|---|---|
| Term loan from bank (75%) | 1,094.84 |
| Cash credit limit (separate) | 252.34 |
| Total project cost | 1,459.78 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. DSCR is lowest at 1.22 in Year 2. All figures are illustrative.
Type 4 cylinder manufacturing process
A Type 4 line makes the liner, winds the structure and then proves every cylinder under pressure. Winding is the bottleneck, so daily output is set by the number of winding spindles and the minutes each cylinder needs.
- Boss machining
Aluminium bar is turned into threaded end bosses that later hold the valve and seal against the liner.
- Liner moulding
HDPE or polyamide is blow moulded around the bosses into a one-piece, gas-tight liner.
- Liner inspection
Each liner is checked for wall thickness and defects; IS 15935 sets a maximum defect size.
- Filament winding
Carbon fibre tow, wetted in epoxy, is laid over the liner in hoop and helical layers to the design pattern.
- Glass overwrap
An outer glass fibre layer protects the carbon from cuts, stone impact and abrasion on the vehicle.
- Curing
Cylinders cure in an oven while rotating, so resin does not drain to one side before it sets.
- Proof and leak testing
Every cylinder is pressure tested to at least 300 bar for a 200 bar design, then leak tested. Samples from each batch are burst and pressure cycled.
- Marking and dispatch
Cylinders are coated, marked with approval details and service life, and sent to vehicle makers or cascade builders.
Type 1, 2, 3 and 4 cylinders: what changes
The four types differ in how much of the pressure the liner carries. In a Type 4 cylinder the plastic liner carries none of it, so the fibre wrap has to be designed and tested for the full load.
| Type 1 | All-metal cylinder, usually steel, made without a welded seam. The heaviest option; on-board CNG versions follow IS 15490. |
|---|---|
| Type 2 | Metal liner with a hoop wrap of resin-impregnated fibre round the body only. The liner and wrap share the load. |
| Type 3 | Thin metal liner, usually aluminium, fully wrapped in fibre. The liner still shares part of the load. |
| Type 4 | Non-metallic liner, fully wrapped. The fibre takes all the pressure, and a TDB release (May 2026) puts the weight saving at up to 75% against steel cylinders. |
| Burst requirement for Type 4 | For a 200 bar cylinder, IS 15935 sets a minimum burst of 470 bar with carbon fibre and 730 bar with glass fibre. This is why carbon is the usual choice. |
Raw materials for Type 4 cylinders
Carbon fibre decides the cost of a Type 4 cylinder. In the sample it is 62% of raw material cost, and raw materials are 57.8% of sales, so a small change in fibre price moves profit sharply.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Carbon fibre tow | 62% | 859.21 |
| Epoxy resin and hardener | 14% | 194.02 |
| Aluminium boss inserts | 9% | 124.72 |
| HDPE or polyamide liner resin | 7% | 97.01 |
| Glass fibre for outer layer | 5% | 69.29 |
| Protective coating and end caps | 3% | 41.57 |
| Total | 100% | 1,385.82 |
Fibre grade, resin system and liner material are fixed at design approval. Changing any of them later can mean fresh qualification tests.
Machinery for a Type 4 cylinder plant
Filament winding machines are the largest item at ₹211.73 lakh in the sample. Test equipment comes next as a group: proof, burst, cycling and lab testing together cost more than the liner line.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| CNC multi-axis filament winding machines | Lay fibre over the liner to the design pattern | 211.73 |
| Liner blow moulding machine with moulds | Forms the plastic liner around the bosses | 98.81 |
| Burst and pressure cycling test rig | Batch burst and fatigue tests | 84.69 |
| Curing ovens with rotators | Set the resin evenly | 70.57 |
| Hydrostatic proof and leak test rig | Tests every cylinder before dispatch | 70.57 |
| Compressors, cranes and utilities | Air, handling and services | 56.46 |
| CNC lathe for boss machining | Turns and threads aluminium bosses | 42.34 |
| Resin mixing and impregnation system | Meters resin and wets the fibre | 35.29 |
| Quality lab with ultrasonic and permeation testers | Liner, material and leak checks | 35.29 |
| Total plant and machinery | 705.75 | |
Costs are the sample report's estimates for a 13 cylinders per day line. Get current quotations before you finalise.
Manpower and power for the plant
The sample plant employs 73 people. Winding operators and test technicians need training on the approved procedure, and a quality engineer signs off each batch. Power and fuel come to 7.9% of sales, mostly for curing ovens, compressors and test pumps.
| Category | Number | Monthly wage (₹) | Year 1 (₹ lakh) |
|---|---|---|---|
| Management, supervision and administration | 11 | 30,500 | 40.26 |
| Skilled workers and operators | 26 | 19,500 | 60.84 |
| Semi-skilled and unskilled workers | 36 | 13,000 | 56.16 |
| Total | 73 | 157.26 |
PESO approval and standards for Type 4 cylinders
Approvals decide when a Type 4 plant can sell its first cylinder. Plan them before you order the winding machines, as of October 2026.
| Manufacturing approval | PESO approval under the Gas Cylinders Rules, 2016. The application is made in Schedule III with proof of land possession, a layout plan and a site plan. |
|---|---|
| Design documents | Design drawings and calculations signed by BIS or a third-party inspection agency, as PESO's FAQ describes. |
| Product standard | IS 15935:2021 for composite on-board CNG cylinders: 200 bar working pressure at 15 °C, test pressure at least 300 bar, service life up to 20 years. |
| Design qualification | Type tests under IS 15935 include burst, at least 45,000 ambient pressure cycles, bonfire, penetration, permeation and drop tests on prototype cylinders. |
| Buyer inspection | Gas company tenders for Type 3 and Type 4 cascades ask for PESO design approval and third-party inspection by an approved agency. |
| Plant approvals | Udyam and GST registration, State Pollution Control Board consent, factory licence and fire NOC, as for any plant in your state. |
Who buys Type 4 cylinders in India
Demand comes from the move to gas in transport. A PNGRB note of March 2025 records over 5.5 lakh CNG vehicles sold in the first nine months of 2024. City gas companies also move gas to stations in cylinder cascades.
The Technology Development Board signed an agreement in May 2026 to support indigenous Type IV CNG cylinder manufacture. Hydrogen and compressed biogas add newer, smaller orders.
- Bus and truck manufacturers fitting CNG tanks at the factory
- City gas distribution companies buying cascades
- Compressed biogas plants that truck gas to users
- CNG kit makers and retrofit workshops
- Hydrogen vehicle and storage developers
Weight is what you sell: a Type 4 cylinder costs more than a steel one, so buyers pay for it only where lighter tanks add payload or range, as in buses, trucks and mobile cascades.
Mistakes that weaken a Type 4 cylinder project report
- No time or money for approvals
Prototype cylinders are destroyed in qualification tests. A report that starts sales in month one ignores months of testing and PESO review.
- One price for every size
A 60 litre car cylinder and a 150 litre bus cylinder use very different amounts of fibre. Sales must follow a size mix.
- Treating carbon fibre price as fixed
It is the biggest cost. The report should show profit and DSCR with a 10% rise in fibre price.
- Leaving out batch test losses
Each batch gives up cylinders to burst and cycling tests. Saleable output is lower than wound output.
- Assuming quick payment from vehicle makers
Large buyers set their own credit terms. Debtor days drive the cash credit limit.
How NPCS helps you plan a Type 4 cylinder plant
- Size mix and capacityChoose cylinder sizes and winding spindles to suit CNG, cascade or hydrogen buyers.
- Machinery and test rigsCompare winding, liner and test equipment and get quotations.
- Bank-ready project reportProjections, DSCR and working capital with the approval period built in.
- Approvals planPlant layout and the PESO, BIS and state approvals list for your site.
NPCS's client list shows 116 assignments in metal products, one of them for Type 4 cylinders. The NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports since 1994.
What's inside the type 4 cylinders sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS type 4 cylinders project reports
These are type 4 cylinders project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| LPG Cylinder Refilling | LPG Cylinders (14.2 Kgs Size): 1000 Cylinders/Day LPG Cylinders (19 Kgs Size): 1000 Cylinders/Day | ₹4.27 crore | 26% | 45% | Get this report |
| LPG Cylinders | L.P.G. Cylinders (14.2 Kgs Size): 180 Nos./Day, L.P.G. Cylinders (19 Kgs Size): 180 Nos./Day | ₹5.47 crore | 21% | 56% | Get this report |
| LPG Cylinders | LPG Cylinders (14.20 Kgs Size):150,000Nos/annum LPG Cylinders (19 Kgs Size):150,000Nos/annum | ₹9.43 crore | 28% | 56% | Get this report |
| LPG Cylinders | LPG Cylinders (14.20 Kgs Size): 1000 Nos./day LPG Cylinders (19 Kgs Size): 1000 Nos./day | ₹11.13 crore | 30% | 56% | Get this report |
| CNG Cylinders | 500 Nos/day | ₹31.74 crore | 41% | 32% | Get this report |
| LPG Cylinders | LPG Cylinders (14.20 Kgs Size):3,334.0 Nos. per day LPG Cylinders (19 Kgs Size):3,334.0 Nos. per day | ₹34.75 crore | 32% | 46% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Type 4 Cylinders project report: frequently asked questions
What is the cost of a Type 4 cylinder manufacturing plant in India?
Our sample report models a 13 cylinders per day plant at ₹1,459.78 lakh, with ₹705.75 lakh in plant and machinery. The total includes land, building, contingencies and working capital margin. Before production starts you also spend on prototype cylinders that are destroyed in approval tests. Your own cost depends on cylinder sizes, the number of winding machines and whether you buy or build test rigs.
What is a Type 4 cylinder?
A Type 4 cylinder is a gas cylinder with a non-metallic liner, usually HDPE or polyamide, fully wrapped in resin-soaked carbon fibre. The liner only keeps the gas in; the fibre carries all the pressure. Type 1 is all steel, Type 2 has a metal liner with hoop wrap, and Type 3 has a metal liner with full wrap.
Which standard and approval apply to Type 4 CNG cylinders in India?
IS 15935:2021 is the Indian standard for composite on-board CNG cylinders, and it covers Types 2, 3 and 4. Manufacture needs approval from PESO under the Gas Cylinders Rules, 2016, with design drawings and calculations signed by BIS or a third-party inspection agency. Rules change, so confirm the current requirements with PESO before you order machinery.
What is the main raw material for Type 4 cylinders?
Carbon fibre tow is the main raw material. In our sample report it makes up 62% of raw material cost, followed by epoxy resin and hardener at 14% and aluminium boss inserts at 9%. Carbon fibre is priced on a global market, so the report should test how a rise in its price or in the rupee cost of imports moves profit.
Is Type 4 cylinder manufacturing profitable?
In our illustrative sample, the plant earns a 14% return on investment in Year 3, breaks even at 45% of capacity and pays back in about 4.6 years. Average DSCR is 1.39. Margins are thinner than many metal products because carbon fibre is expensive, so profit depends on winning approved designs with vehicle makers and gas companies.
How long does a Type 4 CNG cylinder last?
Under IS 15935:2021 the manufacturer declares the service life of a composite CNG cylinder, up to a maximum of 20 years. The cylinder is marked with its expiry date and must be inspected periodically as the statutory authority requires. A PNGRB note on CNG safety cites re-examination every three years under Rule 35 of the Gas Cylinders Rules, 2016.
Is the sample report free and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project. It should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, cylinder range, location and lender.
Sources and references
- IS 15935:2021 Composite cylinders for on-board storage of CNG as a fuel for automotive vehicles, standard detailsBureau of Indian Standards, checked Oct 2026
- IS 15935:2021 text (first revision)Bureau of Indian Standards, checked Oct 2026
- FAQ on Gas Cylinders RulesPetroleum and Explosives Safety Organisation, checked Oct 2026
- Press note on CNG safety and PESOPetroleum and Natural Gas Regulatory Board, checked Oct 2026
- TDB agreement for manufacture of Type-IV CNG cylindersTechnology Development Board, Department of Science and Technology, checked Oct 2026
- Technology Development Board signs agreement for manufacturing Type-IV composite CNG cylindersNews On AIR, Prasar Bharati, checked Oct 2026
- Technical document for CNG cascades, Type 3 and Type 4Bharat Petroleum Corporation Ltd, checked Oct 2026
