What is a super enamelled copper wire project report?
A super enamelled copper wire project report is a detailed project report (DPR) for a plant that draws copper wire rod to fine gauges, anneals it and coats it with baked insulating enamel for motor and transformer windings. It sets out the process, machinery, copper and enamel costs, project cost, finance, five-year projections, DSCR and break-even.
Promoters use it to size the plant and raise a term loan and cash credit; banks use it to judge whether a thin-margin, copper-heavy business can repay.
Also known as: enamelled copper winding wire project report, project report on super enamelled copper wire, super enamelled copper wire business plan, magnet wire plant DPR.
Super enamelled copper wire manufacturing plant cost in India
Our sample report models a 460 kilograms per day plant working 300 days a year, or 1,38,000 kg a year at full capacity. It starts at 60% utilisation, reaches 80% in Year 5 and sells class 200 wire at ₹2,130 per kg, ex-GST.
| Land and site development | 33.36 |
|---|---|
| Building and civil works | 85.99 |
| Plant and machinery | 217.91 |
| Other fixed assets | 21.14 |
| Contingencies | 15.20 |
| Preliminary and pre-operative | 9.34 |
| Working capital margin | 70.32 |
| Total | 453.26 |
| Promoter's contribution (25%) | 113.32 |
|---|---|
| Term loan from bank (75%) | 339.94 |
| Cash credit limit (separate) | 210.97 |
| Total project cost | 453.26 |
Working capital is the real size of this project: the cash credit limit of ₹210.97 lakh is almost as large as the machinery bill. In Year 3, money owed by customers on 60 days of credit is ₹338.23 lakh, the biggest current asset in the sample.
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments; DSCR (debt service coverage ratio) is cash available for loan payments divided by the payments due. All figures are illustrative.
Super enamelled copper wire manufacturing process
An integrated plant starts from 8 mm copper rod and ends with tested wire on spools. Smaller units often buy drawn wire and run only the enamelling half of this line.
- Rod breakdown
The 8 mm rod is pulled through a series of carbide and diamond dies to an intermediate diameter, with emulsion cooling the dies.
- Fine drawing and annealing
The wire is drawn to its final gauge and passed through an inline annealer, under steam or inert gas, so it comes out soft and bright.
- Base coat enamelling
Polyesterimide enamel is applied in many thin passes through dies or felts, and each pass is baked in a catalytic oven that burns off the solvent.
- Top coat enamelling
Further passes of polyamide-imide build the over-coat that gives class 200 heat resistance and toughness during coil winding.
- Cooling and lubrication
The hot film is cooled before it touches a guide pulley, then given a light wax or oil so it slides through winding machines.
- Testing
Every lot is checked for diameter, film build, elongation, breakdown voltage, pinholes, flexibility and thermal shock.
- Spooling and packing
Wire is wound on plastic spools by weight, labelled with size and thermal class and packed in cartons.
Which enamel grade should the plant make?
"Super enamelled" is a loose trade name in India. The grade you choose decides the enamel bought, the oven settings and the buyers you can approach, so fix it before ordering machines.
| Polyurethane, class 155 to 180 | Solderable without stripping; fine gauges for relays, small coils and electronics |
|---|---|
| Modified polyester, class 155 | General-purpose wire for fans and small motors; much of the rewinding trade buys this grade |
| Polyesterimide, class 180 | Single-coat wire for motors and pumps that run warmer |
| Polyesterimide with polyamide-imide over-coat, class 200 | The dual-coat grade modelled in our sample; tough enough for automatic winding and used in motors, pumps and transformers |
Thermal class is the highest continuous temperature, in °C, the insulation is rated for. Most plants run two grades and switch by changing enamel and oven profile.
Raw materials: copper rod and enamels
Copper is almost the whole material bill. ETP rod comes from primary copper producers and large rod makers, and its price follows the London Metal Exchange and MCX copper rates daily.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| ETP copper wire rod 8 mm | 94% | 1,444.29 |
| Polyesterimide base coat enamel | 3% | 46.09 |
| Polyamide-imide top coat enamel | 2% | 30.73 |
| Solvents and drawing lubricants | 1% | 15.37 |
| Total | 100% | 1,536.48 |
In the sample, raw materials are 74.7% of sales. Fine gauges carry more enamel and a higher conversion charge per kg than thick gauges.
Machinery for an enamelled copper wire plant
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Rod breakdown wire drawing machine | Draws 8 mm rod to intermediate size | 34.87 |
| Intermediate drawing machine with inline annealer | Draws to final gauge and softens the wire | 30.51 |
| Horizontal enamelling machines with catalytic ovens | Coat and bake fine and medium gauges | 82.81 |
| Vertical enamelling machine | Coats thick gauges | 26.15 |
| Spooling and rewinding machines | Wind finished wire on spools by weight | 13.07 |
| Winding wire testing laboratory | Breakdown voltage, pinhole, elongation and heat tests | 10.89 |
| Air compressor and cooling tower | Compressed air and cooling water for drawing and ovens | 8.72 |
| Electrical panels and transformer | Power supply and drive control | 10.89 |
| Total plant and machinery | 217.91 | |
The enamelling machines are the largest item, at 38% of machinery cost in the sample. Get current quotations, including oven type and number of passes, before you finalise.
Power, utilities and manpower
Power is a small share of sales because copper makes each kilogram so valuable. Supply quality still matters: a voltage dip stops the ovens and spoils wire on the line.
| Power and fuel (sample, Year 3) | ₹42.53 lakh, 2.1% of sales; drawing motors and oven heaters are the main loads |
|---|---|
| Other utilities | Cooling water for drawing emulsion, compressed air, DG set backup and an exhaust stack for the ovens |
| Manpower (sample) | 50 people: 8 in management and supervision, 17 skilled operators, 25 semi-skilled and unskilled workers |
| Wage bill (sample, Year 1) | ₹108.06 lakh, rising 5% a year |
| Shifts | Enamelling ovens run best without stops, so plan three shifts for the coating line |
Licences and BIS standards for winding wire
| Copper rod input | Copper wire rod must carry the BIS mark to IS 12444 under the Copper Products (Quality Control) Order, 2024 (S.O. 1801(E)); buy only from licensed rod makers |
|---|---|
| Product standard | IS 13730 (Part 13) covers class 200 polyesterimide wire with a polyamide-imide over-coat; test methods are in the IS 13778 series |
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board; wire drawing appears in the orange category list, and the ovens need solvent fume control |
| Business registration | Udyam (MSME) and GST registration |
| Factory and fire | Factory licence where worker thresholds apply, and fire NOC because enamels and solvents are flammable |
| Power | Industrial connection sanctioned for the full connected load of drawing machines and ovens |
As of October 2026. Rules and categories vary by state; confirm with BIS and your state board before you apply.
Who buys super enamelled copper wire?
Every electric motor, pump, fan, transformer and many household appliances carry copper windings, and burnt motors are rewound in workshops in every town. That gives a new unit two routes to market: dealers who supply the rewinding trade, and manufacturers who buy on approved-vendor lists.
- Electric motor and submersible pump manufacturers
- Distribution transformer makers
- Fan, mixer and appliance motor makers
- Motor rewinding workshops, through winding wire dealers
- Relay, solenoid and ballast coil makers
How a new unit gets in: start with dealers in a few fast-moving gauges, where payment is quicker, while sending samples to motor and pump makers. OEM approval trials take months, and the report should not assume OEM volumes in Year 1.
Mistakes that weaken a super enamelled copper wire project report
- Fixing one selling price for five years
Buyers pay the day's copper rate plus a conversion charge. Lenders look for a report that models the conversion margin and tests a copper price swing.
- No allowance for scrap and start-up losses
Wire breaks, gauge changes and oven start-ups create scrap copper that sells below rod price; output must allow for it.
- Short customer credit
Motor and pump makers often pay in 60 days or more. With copper inside every invoice, a small error in debtor days leaves the cash credit limit far too low.
- Too many gauges at the start
Each gauge needs its own dies and settings. A plan that sells fine, medium and thick wire from day one overstates early utilisation.
- Leaving out oven fume control
Solvent vapour from the ovens must be burnt or treated. Without it the pollution consent and the fire NOC get held up.
How NPCS helps you plan a super enamelled copper wire plant
- Grade and gauge mixChoose thermal class, gauge range and daily output to match your buyers and budget.
- Drawing and enamelling lineCompare integrated and enamelling-only plans, oven types and machine quotations.
- Bank-ready project reportCopper-linked pricing, working capital, DSCR and sensitivity in the format your lender wants.
- Approvals and layoutPlant layout, power load, BIS testing needs and the approvals list for your state.
NPCS has prepared project reports and feasibility studies since 1994. Its published client list shows 116 assignments in metal products, including recent copper cathode and copper wire recycling studies.
What's inside the super enamelled copper wire sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS super enamelled copper wire project reports
These are super enamelled copper wire project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Super Enamelled Copper Wire | 2 MT / Day | ₹5.5 crore | 44% | 34% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Super Enamelled Copper Wire project report: frequently asked questions
How much does it cost to set up a super enamelled copper wire plant in India?
Our sample report models a 460 kg per day plant at ₹453 lakh, including ₹217.91 lakh of machinery and ₹70.32 lakh of working capital margin. As an indicative guide, an enamelling-only unit buying drawn wire needs about ₹2–3.5 crore, and a 1–2 MT per day integrated plant about ₹8–15 crore. Copper prices and customer credit change the working capital most.
What is the difference between enamelled and super enamelled copper wire?
Both are copper wire insulated with a thin baked enamel film. In the Indian trade, super enamelled usually means a tougher synthetic enamel with a higher thermal class. The common grade is a polyesterimide base coat with a polyamide-imide over-coat, rated at class 200. Plain enamelled wire may use older or single-coat enamels with lower heat ratings.
What raw materials are needed to make super enamelled copper wire?
The main input is electrolytic tough pitch (ETP) copper wire rod of 8 mm, which is 94% of raw material cost in our sample. The rest is polyesterimide base coat enamel, polyamide-imide top coat enamel, solvents and drawing lubricants. Copper rod bought in India must carry the BIS mark to IS 12444.
Which machines are needed for an enamelled copper wire plant?
You need a rod breakdown machine, a fine drawing machine with inline annealer and horizontal enamelling machines with catalytic ovens. Add a vertical enamelling machine for thick gauges, spooling machines and a testing laboratory. Compressors, a cooling tower and electrical panels complete the plant. Enamelling machines are the largest item in our sample.
Is super enamelled copper wire manufacturing profitable?
It can be, but margins are thin because copper is most of the selling price. In our illustrative sample, raw materials take 74.7% of sales, return on investment is 18% in Year 3, average DSCR is 1.56 and break-even is about 49% of capacity. Profit depends on conversion charges, gauge mix, scrap control and how fast customers pay.
Is BIS certification mandatory for enamelled copper wire?
The copper wire rod you buy must carry the BIS mark to IS 12444 under the Copper Products (Quality Control) Order, 2024. For the finished wire, IS 13730 (Part 13) is the Indian standard for class 200 dual-coat wire, and OEM buyers ask for test results against it. Check with BIS whether finished winding wire needs a licence when you apply.
Is the super enamelled copper wire project report PDF free, and can I use it for a loan?
The sample PDF is free to view and download. It shows the format and depth of an NPCS report. Its figures are illustrative and not based on a real project, so it should not go to a bank. For a loan, NPCS prepares a report for your own capacity, gauge range, location and lender.
Sources and references
- Copper Products (Quality Control) Order, 2024, S.O. 1801(E)Department for Promotion of Industry and Internal Trade, Gazette of India, checked Oct 2026
- Published Indian Standards: winding wires (IS 13730 and IS 13778 series)Bureau of Indian Standards, checked Oct 2026
- Orange category industries listState Pollution Control Board, Odisha, checked Oct 2026
