WhatsApp us
Request a Quote

Project reports in Metal Products

Steel Wire Rope Plant Project Report

Plant cost, machinery, BIS certification and five-year profitability for a steel wire rope plant, with a free sample project report PDF you can open now.

Plant capacity
8.9 MT per day
Total project cost
₹912 lakh
Plant and machinery
₹467 lakh
Return on investment
14% (Year 3)
Break-even
47% of capacity
Payback period
About 4.6 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a steel wire rope project report?

A steel wire rope project report is a detailed project report (DPR) for a plant that draws high carbon wire rod into fine wire, twists the wires into strands and closes the strands around a core. It sets out the process, machinery, BIS licensing, project cost, means of finance, five-year projections, DSCR and break-even.

Promoters use it to size the plant and raise a term loan; banks and investors use it to judge whether the rope plant can repay from its own cash flow.

Also known as: project report on steel wire rope, steel wire rope business plan, wire rope manufacturing project report, DPR for wire rope plant.

Steel wire rope manufacturing plant cost in India

Our sample report models an integrated plant of 8.9 metric tonnes per day (2,937 MT per year) that draws its own wire. It runs 330 days a year, starts at 60% of capacity, reaches 80% in Year 5 and sells rope at ₹1,00,000 per MT before GST.

₹912 lakhTotal project cost
₹2,056 lakhSales in Year 3
₹124 lakhNet profit in Year 3
1.39Average DSCR
Cost of project (₹ lakh)
Land and site development68.28
Building and civil works197.38
Plant and machinery466.74
Other fixed assets53.25
Contingencies33.21
Preliminary and pre-operative20.47
Working capital margin72.96
Total912.29
Means of finance (₹ lakh)
Promoter's contribution (25%)228.07
Term loan from bank (75%)684.22
Cash credit limit (separate)218.87
Total project cost912.29

Margins in the sample are thin: net margin moves from 2.5% in Year 1 to 8.6% in Year 5. DSCR (debt service coverage ratio) is the cash available for each rupee of loan repayment, and it is lowest at 1.22 in Year 2, when full instalments begin.

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.

Steel wire rope manufacturing process

A rope is built in three layers: wires make strands, and strands are closed around a core. The integrated route in our sample starts from high carbon wire rod bought in coils.

  1. Pickling and phosphating

    Rod coils are dipped in acid to strip mill scale, rinsed and given a phosphate coat that carries the drawing lubricant.

  2. Wire drawing

    Straight line machines pull the rod through tungsten carbide dies in several passes, raising tensile strength as the diameter falls.

  3. Patenting

    Between drawing passes, wire is heated and cooled under control so it regains the ductility needed for further drawing.

  4. Galvanising

    Wire meant for galvanised rope runs through a molten zinc bath; bright rope skips this step.

  5. Stranding

    Tubular or planetary stranders twist wires around a centre wire into strands such as 7, 19 or 36 wires.

  6. Closing and lubrication

    The closing machine preforms six or eight strands and lays them around a fibre core or a steel core, applying rope grease as it goes.

  7. Testing and reeling

    A sample length is pulled to break on the rope testing machine, then the rope is wound on reels and tagged by construction, size and grade.

Should you buy drawn wire or draw your own?

This is the first choice in a steel wire rope business plan, because it sets machinery cost, the pollution category and how much control you have over wire quality.

PointBuy drawn wireDraw wire from rod
MachineryStranders, closing machine, testing and reelingAdds pickling, drawing, patenting and galvanising lines
Raw materialRope wire bought in each size and gradeHigh carbon wire rod in coils
Quality controlDepends on the wire supplier's tensile and torsion resultsGrade and zinc coating are set in your own plant
Pollution categoryUsually lower, as there is no acid or zinc bathPickling and galvanising often place the unit in Red
SuitsA first unit serving dealers with standard ropesA plant aiming at cranes, mines and tender buyers

Raw materials for steel wire rope

Raw materials take 63% of sales in the sample. High carbon wire rod comes from integrated steel plants, and its carbon content decides which rope grade (1570, 1770, 1960 or 2160 N/mm²) the drawn wire can reach.

Raw materialShare of costYear 3 (₹ lakh)
High carbon steel wire rod82%1,062.69
Zinc for galvanising8%103.67
Fibre core (polypropylene or sisal)4%51.84
Rope lubricant and grease3%38.88
Pickling and phosphating chemicals3%38.88
Total100%1,295.96

Wooden or steel reels are counted under packing, at 1.1% of sales in the sample.

Wire rope making machines and their cost

Stranding machines are the largest machinery item in the sample, followed by the wire drawing line. Testing equipment must handle the breaking load of the thickest rope you plan to sell.

MachineWhat it doesSample cost (₹ lakh)
Straight line wire drawing machinesDraws rod to rope wire size and grade102.68
Patenting and hot dip galvanising lineHeat treats wire and applies zinc84.01
Pickling and phosphating plant with fume scrubberCleans and coats rod; captures acid fumes37.34
Tubular and planetary stranding machinesTwists wires into strands112.02
Rope closing machine with preformerLays strands around the core70.01
Rope breaking load and wire testing machinesTests rope breaking force and wire tensile and torsion23.34
Reeling and spooling machinesWinds finished rope on reels18.67
EOT craneMoves bobbins, reels and rod coils18.67
Total plant and machinery466.74

Costs are the sample report's estimates for an 8.9 MT per day plant. Get current quotations before you finalise.

Manpower and power for a wire rope plant

Power and fuel cost ₹158.41 lakh in Year 3 of the sample, about 7.7% of sales. Most of it goes to drawing motors, the patenting furnace and the zinc bath. The plant employs 56 people across shifts.

CategoryNumberMonthly wage (₹)Year 1 cost (₹ lakh)
Management, supervision and administration830,50029.28
Skilled workers and operators2019,50046.80
Semi-skilled and unskilled workers2813,00043.68
Total56119.76

Skilled roles include strander and closer operators, a wire drawing setter and a testing chemist. Wages rise 5% a year in the sample.

BIS certification and licences for a steel wire rope plant

Steel wire rope is under a Quality Control Order (QCO). Rope of a covered standard cannot be sold in India without a BIS licence and the Standard Mark.

BIS licenceRequired under the Steel Wires or Strands, Nylon or Wire Ropes and Wire Mesh (Quality Control) Order, 2024, in force from 1 December 2024 (1 March 2025 for small and 1 June 2025 for micro enterprises)
Standards coveredIS 2266 general engineering ropes, IS 2365 lift ropes, IS 1855 mine winding ropes, IS 1856 haulage ropes, IS 4521 oil well ropes and IS 2141 stay strand
TestingBreaking force, size, lay and mass on rope, plus tensile, torsion, reverse bend and zinc coating on wire. Micro and small units may share a lab; some tests can go to a NABL lab
MarkingStandard Mark on a metal tag on each reel, licence number, and a certificate of conformance with each consignment
Pollution consentConsent to establish and operate from the State Pollution Control Board. In Odisha, for example, pickling and galvanising fall in Red and wire drawing alone in Orange
Business and factoryUdyam and GST registration, factory licence, fire NOC and an industrial power connection for the connected load

In November 2025, DPIIT moved steel QCOs to the Ministry of Steel. The 2024 order is withdrawn only when that ministry notifies a matching order, so confirm the current order with BIS before applying. Checked October 2026.

Who buys steel wire rope in India?

Most rope is bought as a replacement. Cranes, mine winders, lifts and port equipment change ropes on a fixed schedule or after inspection, so demand keeps coming even in slow years for new projects.

Buyers order by construction (6x19, 6x36), diameter, grade, core and finish, and large buyers ask for BIS-marked rope with a test certificate for each reel.

  • Crane, hoist and material handling equipment makers
  • Coal and metal mines, for winding and haulage ropes
  • Lift and elevator companies
  • Ports, shipyards and fishing fleets
  • Construction, power transmission and infrastructure contractors
  • Wire rope dealers and rigging suppliers

Where a new plant wins: regional dealers and maintenance buyers need the exact construction and length quickly. A plant that holds stock of common sizes and cuts to length can win orders that large plants with long lead times miss.

Mistakes that weaken a steel wire rope project report

  • One price for every rope

    Price per tonne changes with grade, core, finish and diameter. A report needs a stated product mix, or revenue cannot be checked.

  • No time or cost for the BIS licence

    Without the licence the plant cannot sell covered ropes in India. Lab equipment, sample testing and the months before grant belong in the plan.

  • Leaving out acid and zinc waste

    Spent pickling acid, rinse water and zinc ash need treatment and authorised disposal, and they often decide the pollution category.

  • Ignoring die wear and process scrap

    Carbide dies wear with every tonne drawn, and strand ends and test lengths are lost. Both raise cost per tonne.

  • Assuming tender buyers pay in 45 days

    The sample assumes 45 days, and trade receivables are already its largest current asset. Mines and public sector tenders can pay later, which needs a bigger cash credit limit.

How NPCS helps you set up a steel wire rope plant

  • Route and product mixDecide between buying wire and drawing your own, and which constructions and grades to make first.
  • Machinery and layoutSize drawing, stranding and closing machines to your capacity and plan the shop floor.
  • BIS and approvalsList the standards, lab tests and state approvals your plant needs.
  • Bank-ready project reportProjections, DSCR and working capital in the format your lender wants.

NPCS's client list shows 116 assignments for metal products units, and the NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports since 1994.

What's inside the steel wire rope sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

19 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Find NPCS project reports in your budget

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Steel Wire Rope project report: frequently asked questions

What is the steel wire rope manufacturing plant cost in India?

A unit that buys drawn wire and only strands and closes rope, at about 2–4 MT per day, needs roughly ₹3–6 crore. An integrated plant that draws its own wire at 8–10 MT per day needs about ₹8–12 crore with land, building and working capital margin. Our sample report models 8.9 MT per day at ₹912 lakh. These ranges are indicative.

What raw material is used to make steel wire rope?

High carbon steel wire rod is the main input. In our sample report it is 82% of raw material cost. Zinc for galvanising adds 8%, fibre cores 4%, and rope lubricant and pickling chemicals 3% each. Rod prices follow the steel market, so the report should test a price rise against DSCR.

Is BIS certification mandatory for steel wire rope?

Yes, for ropes sold in India under the covered standards. A Quality Control Order of 2024 requires a BIS licence and the Standard Mark for ropes to IS 2266, IS 2365, IS 1855 and IS 1856, among others. Ropes made only for export are exempt. This was the position as of October 2026, so check the current order before you apply.

Which machines are needed for wire rope manufacturing?

An integrated plant starts with a pickling and phosphating plant, straight line wire drawing machines and a patenting and hot dip galvanising line. It then needs tubular and planetary stranding machines and a rope closing machine with preformer. Testing machines, reeling machines and an EOT crane complete the line. A unit that buys drawn wire skips the first three.

Is steel wire rope manufacturing profitable?

In our illustrative sample, an 8.9 MT per day plant earns a 13.6% return on investment in Year 3. It breaks even at 47.4% of capacity and pays back in about 4.6 years. Margins are thin, so profit depends on rod buying, the share of higher grade and galvanised ropes in the mix, die and power costs, and how fast buyers pay.

What is the difference between fibre core and IWRC wire rope?

A fibre core rope has strands laid around a polypropylene or natural fibre core, which makes it flexible and lighter. An independent wire rope core (IWRC) is a small steel rope at the centre, which gives higher breaking strength and resists crushing on drums. Cranes and mine winders often specify IWRC, so a plant needs both options in its product mix.

Is the sample report free and can I use it for a loan?

The sample is free to view and download as a PDF. It is an illustrative report that shows the format and depth of an NPCS project report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and product mix.

Sources and references

  1. Steel Wires or Strands, Nylon or Wire Ropes and Wire Mesh (Quality Control) Order, 2024, S.O. 2581(E)Department for Promotion of Industry and Internal Trade, Gazette of India, checked Oct 2026
  2. Circular on implementation of the Steel Wires, Wire Ropes and Wire Mesh QCO, 2024Bureau of Indian Standards, checked Oct 2026
  3. Product manual for steel wire ropes (IS 2266)Bureau of Indian Standards, checked Oct 2026
  4. Transfer of iron and steel QCOs to the Ministry of SteelDepartment for Promotion of Industry and Internal Trade, checked Oct 2026
  5. List of Red category industriesState Pollution Control Board, Odisha, checked Oct 2026
  6. List of Orange category industriesState Pollution Control Board, Odisha, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different metal products project?

These are a few of the projects we advise on. NPCS's published client list records 116 metal products assignments, so tell us what you are planning.

Tell us your project

Recent metal products assignments

  • Long Island Trading Co. Pvt. Ltd
    Project Report on Aluminium Can Manufacturing Plant SetupIndore, 2026
  • Allotrope Engineers
    Bankable Project Report on Gas Atomized Aluminium PowderHyderabad, 2026
  • P M Infrastructure Private Limited
    Comprehensive Market Research Report on TMT BarsBangalore, 2026
  • Arham Recycling Private Limited
    Pre-Feasibility Report on Copper Wire RecyclingFaridabad, 2026
  • Bihar Foundry & Castings Limited
    Industrial Project Report on Electrolytic Manganese MetalRanchi, 2026
  • Rgcon Itm
    Comprehensive Project Report on Copper CathodeVisakhapatnam, 2026
  • Krishnay Recycling Pvt Ltd
    Pre-Feasibility Report on Project Planning and Feasibility Report on Copper Cathode and CoSouth Africa, 2026
  • Goodluck India Ltd
    Techno-Economic Project Report on Inner Grooved Copper TubesSikandrabad, 2025

Get a steel wire rope project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Steel Wire Rope Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free steel wire rope sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Steel Wire Rope sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp