What is a steel iron pellets project report?
A steel iron pellets project report is a detailed project report (DPR) for a plant that turns iron ore fines into hard, fired pellets. It covers grinding, balling with bentonite and firing, plus machinery, ore and fuel norms, project cost, means of finance, five-year projections, DSCR and break-even.
Sponge iron makers, steel groups and mine owners use it to size a plant and raise debt; lenders use it to test whether pellet margins can carry the loan.
Also known as: iron ore pellets project report, iron ore pelletization plant DPR, pellet plant business plan, iron pellet plant feasibility report.
Steel iron pellets project report: plant economics
Our sample report models a compact pellet unit of 82 MT per day, or 27,060 MT per year over 330 working days. It starts at 60% of capacity and reaches 80% in Year 5, selling pellets at ₹9,860 per MT ex-plant.
| Land and site development | 110.03 |
|---|---|
| Building and civil works | 316.46 |
| Plant and machinery | 627.64 |
| Other fixed assets | 54.73 |
| Contingencies | 47.20 |
| Preliminary and pre-operative | 28.90 |
| Working capital margin | 64.58 |
| Total | 1,249.54 |
| Promoter's contribution (25%) | 312.38 |
|---|---|
| Term loan from bank (75%) | 937.16 |
| Cash credit limit (separate) | 193.76 |
| Total project cost | 1,249.54 |
The thin year is Year 2: debt service coverage falls to 1.28 once full instalments start, against 1.76 in the moratorium year. Lenders look at this minimum, not only the 1.45 average.
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
Iron pellet plant cost in India by size
Pellet plants come in very different sizes, and the firing machine drives most of the cost. Our sample is a compact shaft-furnace unit; the two larger tiers are indicative ranges for commercial plants of the kind filed for environmental clearance.
Compact unit
₹1,250 lakh
82 MT per day, 27,060 MT per year
- Plant and machinery₹628 lakh
- Land and building₹426 lakh
- Working capital margin₹65 lakh
Term loan ₹937 lakh (75%), promoter ₹312 lakh
Merchant pellet plant
₹250–500 crore
About 0.6–1.2 million tonnes per year
- FiringGrate-kiln or grate
- Power demandAbout 8–12 MW
- Make-up waterSeveral hundred KLD
Project finance from a bank consortium, with EC
Large captive plant
₹700–1,600 crore
About 2–4 million tonnes per year
- FiringTravelling grate
- Power demandAbout 15–30 MW
- Ore feedOwn beneficiation or pipeline
Usually part of an integrated steel group
Larger tiers are indicative and include land and utilities. Costs vary with ore beneficiation, captive power and location.
Iron ore pellet manufacturing process
Pelletisation turns ore too fine to charge into a furnace into hard, evenly sized balls. Every plant follows the same seven stages; what changes between plants is the firing machine.
- Drying and grinding
Ore fines are dried and ground in a ball mill to a fine powder, because coarse particles make weak, cracked balls.
- Proportioning and mixing
Weigh feeders dose the ground ore with about 1% bentonite, plus limestone or dolomite for fluxed grades, and an intensive mixer blends in water.
- Balling
Inclined rotating discs roll the moist mix into green balls of roughly 9–16 mm; disc speed, angle and water spray set the size.
- Green ball screening
Roller screens send undersize and oversize balls back to the mixer, so only the target size reaches the furnace.
- Induration
Green balls are dried, preheated and fired at about 1,250–1,300°C, which bonds the grains and gives the pellet its strength.
- Cooling and screening
Hot pellets are cooled with air, screened to remove fines and sampled for crushing strength and tumbler index.
- Stockpiling and dispatch
Pellets are stacked by grade and sent by truck or rail rake to sponge iron and steel plants.
Grate-kiln, travelling grate or shaft furnace?
The firing route is the biggest technical decision in a pellet project. It fixes the capital cost, fuel type, minimum economic size and how consistent the pellets will be.
| Grate-kiln | Balls are dried on a travelling grate, fired in a rotary kiln and cooled in an annular cooler. A 1.2 MTPA Karnataka plant on record uses this route, with about 40 kg of pulverised coal and 58 kWh of power per tonne. |
|---|---|
| Straight travelling grate | Drying, firing and cooling all happen on one moving grate. Suited to very large capacities; an 8.16 MTPA coastal plant reports 39–40 kWh per tonne and is moving its burners from fuel oil to natural gas. |
| Vertical shaft furnace | Balls descend through a vertical shaft against rising hot gas. Lowest capital cost and the route our compact sample assumes, but output per furnace is small and size and strength vary more. |
| What decides the choice | Target capacity, ore type (hematite needs more heat than magnetite), fuel available at the site, and the grade buyers want: DRI-grade pellets for sponge iron kilns or BF-grade for blast furnaces. |
Iron ore, bentonite and fuel for a pellet plant
Plant filings show a little over one tonne of ore fines, 10–12 kg of bentonite and 14–40 kg of coal per tonne of pellets. Odisha Fe 62% fines were assessed at about ₹5,100 per tonne ex-mines in early September 2026 (BigMint), before freight and moisture.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Iron ore fines or concentrate | 90% | 964.93 |
| Pulverised coal for induration | 6% | 64.33 |
| Bentonite binder | 2% | 21.44 |
| Limestone or dolomite flux | 2% | 21.44 |
| Total | 100% | 1,072.14 |
Sample raw materials are 57.4% of sales; power and fuel add 6.8%. Your report uses landed ore cost for your site.
Machinery for an iron ore pelletisation plant
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Vertical shaft induration furnace | Dries, preheats and fires the green balls | 175.74 |
| Ball mill for ore grinding | Grinds ore fines for balling | 112.98 |
| Disc pelletisers with roller screens | Roll and size the green balls | 94.15 |
| Pellet cooler | Cools fired pellets with air | 43.93 |
| Coal grinding and burner system | Prepares and fires the fuel | 43.93 |
| Bag filters and dust extraction | Capture dust at mills and transfer points | 43.93 |
| Proportioning bins with weigh feeders | Dose ore, binder and flux | 37.66 |
| Intensive mixer | Blends ore, bentonite and water | 37.66 |
| Belt conveyors and stacker | Move material and stack pellets | 37.66 |
| Total plant and machinery | 627.64 | |
Costs are the sample report's estimates for an 82 MT per day line. Get current quotations before you finalise.
Clearances and standards for a pellet plant
Pellet plants burn fuel at high temperature and handle fine ore, so environmental approval sets the project timeline more than any other licence.
| Environmental clearance | Pellet plants have been appraised under item 3(a), metallurgical industries, of the EIA Notification 2006 as Category A projects by the ministry's expert appraisal committee (minutes of December 2019) |
|---|---|
| Pollution board consent | Consent to establish and consent to operate under the Air and Water Acts from the State Pollution Control Board |
| Air pollution control | Plants on record use electrostatic precipitators on the induration stack, bag filters at grinding and transfer points, and continuous stack monitoring |
| Quality reference | IS 11336:1985 gives BIS guidelines for heat hardened pellets for blast furnaces |
| Draft specification | A BIS draft for blast furnace pellets proposes at least 64% Fe, average crushing strength of 220 kg per pellet and tumbler index of 92% or more |
| Business registration | Company or firm registration, GST, Udyam where eligible, and factory licence under state rules |
Who buys iron pellets in India?
India produced 63.7 million tonnes of pellets in January to June 2026, up 16% on a year earlier, with Odisha alone making 21.5 million tonnes (BigMint, July 2026). The domestic Fe 63% pellet index stood at ₹11,300 per tonne delivered Raipur at the end of September 2026.
Merchant pellets sell mainly to coal-based sponge iron plants, which need hard pellets that do not break down in the rotary kiln. Large steel groups make most of their own pellets.
- Coal-based sponge iron (DRI) plants in Chhattisgarh, Odisha and Jharkhand
- Integrated steel plants feeding blast furnaces
- Gas-based DRI and HBI producers
- Mini blast furnace and pig iron units
- Pellet traders and exporters
Freight decides the winner: pellet prices are quoted delivered at hubs such as Raipur. A plant between its ore source and its sponge iron buyers keeps the margin that a distant plant pays to the transporter.
Mistakes that weaken a pellet plant project report
- Using the delivered index as the selling price
Published pellet prices are often delivered at a hub. Revenue must use your ex-plant price after freight to the buyer.
- Pricing ore at the ex-mine rate
Ore reaches the plant wet and after road or rail freight. Landed cost per dry tonne is the number that matters.
- Ignoring recirculating load
Undersize green balls and fired fines go back through the circuit. Grinding, balling and fuel must be sized for that extra load.
- No secure ore source
Lenders ask where the fines come from. A plant without a mine, auction record or supply agreement looks risky on paper.
- Leaving out the clearance timeline
Environmental clearance and consents take months. Interest during construction and a later start must be built into the project cost.
How NPCS helps you plan a pellet plant
- Capacity and routeSize the plant and compare shaft, grate-kiln and travelling grate firing for your ore and budget.
- Ore and fuel costingBuild landed ore, bentonite and fuel costs per tonne of pellets for your site.
- Bank-ready project reportProjections, DSCR, sensitivity to ore and pellet prices, and working capital in your lender's format.
- Clearance support dataProcess description, material balance and utility figures for EC and consent applications.
NPCS's published client list includes 116 assignments for steel and metal product units, and the NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports since 1994.
What's inside the steel iron pellets sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Find NPCS project reports in your budget
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Steel Iron Pellets project report: frequently asked questions
What is the cost of an iron ore pellet manufacturing plant in India?
It depends mostly on scale and firing technology. Commercial grate-kiln or travelling grate plants of 0.6–1.2 million tonnes a year need roughly ₹250–500 crore, and larger plants far more. Our sample report models a compact 82 MT per day shaft-furnace unit at ₹1,250 lakh. These are indicative figures; a project report prices your own capacity, site and ore source.
What raw materials are needed to make iron pellets?
Iron ore fines or concentrate are the main input, at a little over one tonne per tonne of pellets. Bentonite binds the balls, at about 10–12 kg per tonne in plant filings. Limestone or dolomite is added for fluxed grades, and coal, oil or gas fires the furnace. In our sample, ore is 90% of raw material cost.
Which is better for pelletisation: grate-kiln, travelling grate or shaft furnace?
Grate-kiln and straight travelling grate machines run most large Indian plants because they handle high tonnage and give uniform pellets. A vertical shaft furnace costs less and suits small capacities, but output per unit is limited and pellet quality needs tighter control. The choice follows your capacity, ore type, fuel and budget.
Is an iron pellet plant profitable?
In our illustrative sample, a compact 82 MT per day unit earns a 15% return on investment in Year 3. It breaks even at 41% of capacity and pays back in about 4.4 years. Real margins swing with the gap between ore fines and pellet prices, freight, fuel cost and plant uptime, so the report tests each of these.
Does a pellet plant need environmental clearance?
Yes, in the cases we checked. The Ministry of Environment's expert committee has appraised pellet plants under item 3(a), metallurgical industries, of the EIA Notification 2006 as Category A projects. You also need consent to establish and operate from the State Pollution Control Board. Confirm the current rules for your state and capacity before you apply.
How are iron ore pellets different from sinter and lump ore?
Pellets are made from very fine ore that cannot be charged directly, and they are hardened at the pellet plant so they can travel by road, rail or ship. Sinter is made inside the steel plant and is too weak to transport far. Lump ore is mined to size and needs no agglomeration, but it is scarcer and costlier.
Is the sample report free and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not from a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and financing plan.
Sources and references
- Pre-feasibility report, pellet plant fuel change project, Visakhapatnam (March 2022)Ministry of Environment, Forest and Climate Change, PARIVESH, checked Oct 2026
- Pre-feasibility report, 1.2 MTPA iron ore pellet plant, KarnatakaMinistry of Environment, Forest and Climate Change, PARIVESH, checked Oct 2026
- Minutes of the 14th EAC (Industry-I) meeting, 23 and 24 December 2019Ministry of Environment, Forest and Climate Change, checked Oct 2026
- Executive summary, pellet plant expansion public hearing (July 2021)Maharashtra Pollution Control Board, checked Oct 2026
- IS 11336:1985 Guidelines for heat hardened iron ore pellets for iron making in blast furnacesBureau of Indian Standards, checked Oct 2026
- Draft Indian Standard: Iron ore pellets for feedstock of blast furnace, specification (MTD 13)Bureau of Indian Standards, checked Oct 2026
- Pellet production in India rises 16% in first half of 2026SteelOrbis, citing BigMint (29 July 2026), checked Oct 2026
- India PELLEX rises INR 300/t around 4-year highMysteel, citing BigMint (8 October 2026), checked Oct 2026
- Odisha: tight availability supports iron ore fines pricesMysteel, citing BigMint (8 September 2026), checked Oct 2026
