What is a pig iron project report?
A pig iron project report is a detailed project report (DPR) for a plant that smelts iron ore with metallurgical coke and fluxes, usually in a mini blast furnace, and casts the hot metal into pigs. It sets out the process, raw material balance, furnace and casting equipment, approvals, project cost, five-year projections, DSCR and break-even.
Promoters use it to size the furnace and raise a term loan; lenders and environmental appraisal committees use it to judge whether the plant is viable and compliant.
Also known as: project report on pig iron, pig iron plant DPR, mini blast furnace project report, pig iron business plan.
Pig iron manufacturing plant cost in India: the sample economics
Our sample report models a small mini blast furnace unit of 30 metric tonnes per day, or 9,900 MT per year, running 330 days. It starts at 60% of capacity and reaches 80% in Year 5, selling pig iron at ₹38,900 per MT ex-works.
Pig iron is a high-volume, thin-margin product. Raw materials take 62.4% of sales in the sample, so a small change in coke price or coke rate moves profit more than any other line.
| Land and site development | 75.72 |
|---|---|
| Building and civil works | 307.54 |
| Plant and machinery | 674.87 |
| Other fixed assets | 77.14 |
| Contingencies | 49.12 |
| Preliminary and pre-operative | 29.61 |
| Working capital margin | 94.70 |
| Total | 1,308.70 |
| Promoter's contribution (25%) | 327.18 |
|---|---|
| Term loan from bank (75%) | 981.52 |
| Cash credit limit (separate) | 284.11 |
| Total project cost | 1,308.70 |
Scale matters more than in most products: the sample is kept small to show the report format. Commercial mini blast furnaces in India are many times larger and often come with a sinter plant and captive power, so their cost runs into hundreds of crore (indicative). Your report should be built for the furnace size you will actually run.
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments; lowest DSCR in any year 1.38. All figures are illustrative.
Pig iron manufacturing process in a mini blast furnace
A blast furnace runs day and night for years between relines. Ore, coke and flux go in at the top, hot air goes in at the bottom, and molten iron and slag come out of the hearth.
- Raw material preparation
Iron ore, coke and fluxes are crushed and screened, because fines choke the gas flow through the furnace and raise coke use.
- Charging
Weighed layers of ore, coke and flux are lifted by skip hoist and charged through the furnace top in a set sequence.
- Hot blast
Hot blast stoves heat the blower air, which enters the furnace through water-cooled copper tuyeres near the hearth.
- Smelting and reduction
Burning coke gives heat and carbon monoxide; the gas reduces the ore as it rises and the iron melts and picks up carbon.
- Tapping
The taphole is drilled open at intervals; iron and slag run down a trough, where a skimmer separates the lighter slag.
- Pig casting
A ladle pours hot metal into the moving moulds of a pig casting machine, where water sprays solidify it into pigs.
- Slag and gas handling
Slag is granulated with water and sold to cement plants; cleaned top gas fires the stoves and boilers.
Blast furnace or submerged arc furnace: which route suits you?
Most Indian pig iron comes from blast furnaces. Some ferro alloy plants switch their submerged arc furnaces to pig iron when alloy prices are weak, so the route choice comes down to coke against power.
| Main energy | Blast furnace: metallurgical coke. Submerged arc furnace: electricity, with coke or coal as reductant |
|---|---|
| Typical scale | Blast furnace: continuous, from small mini blast furnaces to very large units. Arc furnace: an example clearance lists 50,400 MT per year of pig iron from 2 × 9 MVA furnaces (March 2024) |
| Biggest running cost | Blast furnace: coke, so coke rate and coke ash decide profit. Arc furnace: power tariff per unit |
| Flexibility | Blast furnace: one product, hard to stop and restart. Arc furnace: can switch between pig iron and ferro alloys |
| Best fit | Blast furnace: sites near ore and coke supply. Arc furnace: existing ferro alloy plants or states with low power tariffs |
Our sample report models the mini blast furnace route.
Raw materials for pig iron: coke and ore decide the margin
Coke is the largest single cost. High-ash coke raises coke use per tonne and slag volume, so buyers test ash, moisture and strength on every lot. Iron ore fines are usually sintered before charging, because loose fines block the gas flow.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Metallurgical coke | 58% | 976.23 |
| Iron ore lumps and fines for sinter | 36% | 605.94 |
| Limestone and dolomite | 4% | 67.33 |
| Quartzite and manganese ore | 2% | 33.66 |
| Total | 100% | 1,683.16 |
The sample holds 30 days of raw material stock, worth ₹118.58 lakh in Year 1.
Machinery for a pig iron plant
The furnace itself is under a third of the machinery bill. Stoves, blowers, charging, gas cleaning and casting make up the rest, and each has to be sized to the furnace volume.
| Equipment | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Mini blast furnace with refractory lining | Smelts ore into hot metal | 202.46 |
| Hot blast stoves | Preheat the blast air using furnace gas | 94.48 |
| Stock house and skip charging system | Stores, weighs and lifts the burden | 80.98 |
| Air blowers | Supply the blast at the set pressure | 67.49 |
| Gas cleaning plant | Removes dust from top gas before reuse | 67.49 |
| Pig casting machine | Casts hot metal into pigs | 67.49 |
| Cooling water and pumping system | Cools tuyeres, staves and moulds | 40.49 |
| Slag granulation system | Turns slag into saleable granules | 33.74 |
| Electricals and instrumentation | Power distribution and furnace control | 20.25 |
| Total plant and machinery | 674.87 | |
Costs are the sample report's estimates for a 30 MT per day unit. Get current quotations before you finalise.
Manpower for round-the-clock furnace operation
A blast furnace cannot be shut down at the end of a shift, so it needs three crews plus relief. The sample unit employs 59 people, with furnace, casting and maintenance staff on every shift.
| Category | Number | Year 1 cost (₹ lakh) |
|---|---|---|
| Management, supervision and administration | 9 | 32.94 |
| Skilled workers and operators | 21 | 49.14 |
| Semi-skilled and unskilled workers | 29 | 45.24 |
| Total | 59 | 127.32 |
Approvals and standards for a pig iron plant
Environmental approval is the longest step for a blast furnace project, so it should start as soon as the site is fixed.
| Environmental clearance | Required under the EIA Notification 2006, schedule item 3(a), metallurgical industries. The 2024 clearance cited here was appraised as Category A by the Ministry of Environment, Forest and Climate Change |
|---|---|
| Pollution consent | Iron and steel units that process ore are in the Red category; consent to establish and operate comes from the State Pollution Control Board |
| Product standard | IS 13502:1992 sets pig iron grades for steelmaking and foundry use by silicon, manganese and phosphorus content |
| Quality Control Order | The steel QCOs cover 151 carbon, alloy and stainless steel standards (as of August 2024); the Ministry of Steel QCO page does not mention pig iron, so confirm with BIS before you sell |
| GST | Pig iron is traded at 18% GST (prices quoted ex-GST, March 2026) |
| Business and site | Udyam and GST registration, factory licence, fire NOC and an industrial power connection |
Rules change and vary by state. Confirm current requirements with the authorities before applying.
Market for pig iron: buyers, grades and prices
India produced 8.44 million tonnes of pig iron in 2025-26, according to Ministry of Steel data from the Joint Plant Committee. Foundries are the core buyers, and induction furnace steel melters add pig iron to scrap and sponge iron to control carbon and dilute residual elements.
- Grey and ductile iron foundries
- Induction furnace steel melters
- Automobile, tractor and pump casting makers
- Pipe, fitting and manhole cover manufacturers
- Metal traders and stockists
Grade sets the price: on 13 March 2026, foundry grade sold at ₹41,500–44,000 per tonne and steel grade at ₹37,500–40,000 across Indian markets (ex-GST). The sample uses ₹38,900 per MT, close to steel grade, so a plant that holds foundry chemistry can earn more.
Mistakes that weaken a pig iron project report
- Pricing all output at foundry grade
Not every cast meets foundry silicon and phosphorus limits. Off-grade iron sells nearer steel-grade rates, so revenue should follow a realistic grade mix.
- Using a coke rate from large furnaces
Small furnaces and high-ash coke burn more coke per tonne. Borrowing a big plant's figure can turn a loss into a paper profit.
- Leaving out slag and gas credits, or overstating them
Granulated slag sales and top gas used in the stoves both matter. Count them at realistic prices and volumes.
- No provision for relining
The refractory lining wears and the furnace must be stopped and relined. The report should plan for the downtime and cost.
- Starting before environmental clearance
A blast furnace needs clearance before construction. Timelines that ignore it push back the loan schedule.
How NPCS helps you plan a pig iron plant
- Furnace size and routeCompare mini blast furnace sizes, or an arc furnace route, against your ore, coke and power options.
- Raw material balanceWork out ore, coke and flux needs, sinter use and slag volume for your grade.
- Bank-ready project reportProjections, DSCR, break-even and working capital in the format your lender expects.
- Clearance groundworkSite data, utilities and the approvals list to brief your environmental consultant.
NPCS's client list shows 116 assignments in steel and metal products, and NPCS has prepared project reports for metal units since 1994 under founder Ajay Kumar Gupta.
What's inside the pig iron sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS pig iron project reports
These are pig iron project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Pig Iron | 100 MT/Day | ₹15.24 crore | 59% | 37% | Get this report |
| Pig Iron | 10 Lakh MT/Month | ₹388 crore | 49% | 29% | Get this report |
| PIG Iron | 10 Lakhs MT/Day | ₹388 crore | 48% | 29% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Pig Iron project report: frequently asked questions
What is the cost of a pig iron manufacturing plant in India?
It depends mostly on furnace size and on whether you add a sinter plant and captive power. Our sample report models a small 30 MT per day unit at ₹1,308.70 lakh. Commercial mini blast furnaces are much larger, and their cost runs into hundreds of crore. A project report works out the cost for your capacity, site and raw material sources.
What raw materials are needed to make pig iron?
Iron ore, as lumps or as fines made into sinter, and metallurgical coke are the main inputs, with limestone, dolomite and small amounts of quartzite and manganese ore as fluxes. In our sample report coke is 58% of raw material cost and iron ore 36%. Coke quality, especially its ash content, drives fuel use and output.
What is the difference between foundry and steel-grade pig iron?
The difference is chemistry. Foundry pig iron carries more silicon, which helps grey and ductile iron cast well, while steel-grade (basic) pig iron is low in silicon for steel melting. IS 13502 sets grades by silicon, manganese and phosphorus bands. On 13 March 2026 foundry grade sold about ₹3,300–3,750 per tonne above steel grade in Ludhiana and Durgapur.
Is a pig iron business profitable?
In our illustrative sample, a 30 MT per day unit earns a 17% return on investment in Year 3, breaks even at 42% of capacity and pays back in about 4.1 years. Margins are thin because raw materials take 62.4% of sales, so coke prices, coke rate and the grade you sell decide most of the profit.
Which approvals does a pig iron plant need?
Beyond Udyam, GST and a factory licence, a blast furnace unit falls in the Red category for pollution consent and needs environmental clearance under the EIA Notification 2006 for metallurgical industries. Products should meet the grades in IS 13502. Rules vary by state, so confirm before you file.
Can pig iron be made without a blast furnace?
Yes. Some plants smelt pig iron in a submerged arc furnace that is also used for ferro alloys. An environmental clearance issued in March 2024 lists pig iron of 50,400 MT per year as an alternative product of a 2 × 9 MVA ferro alloy unit. This route uses far more electricity than a blast furnace and suits plants with cheap power.
Is the pig iron project report PDF free, and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own furnace size, site and raw material plan.
Sources and references
- An Overview of Steel Sector, July 2026Ministry of Steel, Government of India (data from Joint Plant Committee), checked Oct 2026
- IS 13502:1992 Pig iron: specificationBureau of Indian Standards (copy hosted by BHEL), checked Oct 2026
- Standardization and quality control of iron and steelMinistry of Steel, Government of India, checked Oct 2026
- Environmental clearance, M/s GOS Ispat Pvt. Ltd., Chhattisgarh (EC23A1001CG5869552N)Ministry of Environment, Forest and Climate Change (PARIVESH), checked Oct 2026
- List of Red category industriesPunjab Pollution Control Board, checked Oct 2026
- Price trends (13 March 2026)The Institute of Indian Foundrymen, Indian Foundry Journal, checked Oct 2026
