What is a gold salt project report?
A gold salt project report is a detailed project report (DPR) for a plant that converts fine gold into gold potassium cyanide, the white crystalline salt that feeds gold plating baths. It covers the process, machinery, raw materials, licences, project cost, means of finance, five-year projections, DSCR and break-even that a lender checks before funding the plant.
Chemical entrepreneurs, bullion refiners and plating chemical suppliers use it to size the plant and raise a term loan; banks use it to judge whether the unit can repay.
Also known as: project report on gold salt, gold potassium cyanide project report, gold plating salt plant report, gold salt business plan.
Gold salt manufacturing plant cost in India: sample economics
Gold salt is an unusual project: the plant is small and fairly cheap, but almost every rupee of sales is gold. Our sample report models a 160 grams per day plant running 330 days a year. It starts at 60% capacity, reaches 80% in Year 5 and sells gold salt at ₹10,900 per gram.
Because gold changes hands so quickly, the project cost is modest next to sales. The fixed assets are the cells, crystalliser, effluent plant, assay lab and strong room; the gold itself is financed through working capital.
| Land and site development | 42.68 |
|---|---|
| Building and civil works | 93.49 |
| Plant and machinery | 200.11 |
| Other fixed assets | 19.75 |
| Contingencies | 14.68 |
| Preliminary and pre-operative | 9.27 |
| Working capital margin | 40.52 |
| Total | 420.50 |
| Promoter's contribution (25%) | 105.12 |
|---|---|
| Term loan from bank (75%) | 315.38 |
| Cash credit limit (separate) | 121.56 |
| Total project cost | 420.50 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments; lowest yearly DSCR 2.02. All figures are illustrative.
Gold salt manufacturing process
The sample plant uses the membrane electrolysis route, which goes from gold bar to finished salt in a closed circuit. Every step is weighed and logged, because the plant must account for gold to the milligram.
- Gold receipt and assay
Fine gold bars of 999.9 purity are weighed, assayed and logged into the strong room before any metal is issued to production.
- Electrolytic dissolution
Gold anodes dissolve in a membrane cell, where a membrane keeps the gold solution apart from the cathode so gold does not plate back out.
- Filtration
The gold solution is filtered to remove insoluble matter and traces of other metals that would spoil plating quality.
- Crystallisation
The solution is concentrated in an evaporator and cooled so that gold potassium cyanide crystallises out.
- Drying
Crystals are separated and dried under vacuum at low temperature to a free-flowing white powder.
- Assay and packing
Each lot is tested for gold content, usually close to 68.3%, and packed in sealed, labelled bottles with a lot certificate.
- Gold recovery and effluent treatment
Mother liquor, rinse water and filter residues go through gold recovery, then cyanide destruction, before any water leaves the plant.
Which process route suits a gold salt plant?
Two routes are used. The choice shapes the machinery list, the effluent load and how easily the plant clears safety and pollution inspections.
| Point of comparison | Membrane electrolysis | Chemical route through gold chloride |
|---|---|---|
| Starting point | Fine gold anodes dissolved directly into the cyanide electrolyte | Gold dissolved in aqua regia, then converted to the cyanide salt in several steps |
| Main hazards | Cyanide handling and electrical safety | Acid and nitrogen oxide fumes, plus intermediate gold compounds that are unstable when dry |
| Effluent | Smaller volume, mostly cyanide-bearing rinse water | Acid and cyanide streams that must be kept apart and treated separately |
| Product purity | High and steady, suited to electronics plating | Depends on careful washing between steps |
| Suits | New plants and buyers who need consistent lots | Refiners who already run aqua regia lines |
Raw materials for gold salt
Fine gold is the business. In our sample it is 97% of raw material cost, and raw materials take 90.9% of sales. Potassium cyanide and process chemicals are small in value but drive most of the safety and licensing work.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Fine gold bar 999.9 | 97% | 3,552.80 |
| Potassium cyanide | 2% | 73.25 |
| Potassium hydroxide and process chemicals | 1% | 36.63 |
| Total | 100% | 3,662.68 |
The sample assumes only 3 days of raw material stock and no supplier credit, because gold is bought against payment.
Machinery for a gold salt plant
The membrane electrolysis cell is the largest single item. Note how much of the list is about control rather than production: the effluent plant, assay lab and strong room together cost more than the cell.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Membrane electrolysis cell with rectifier | Dissolves gold into solution | 48.03 |
| Evaporator and crystalliser | Concentrates the solution and grows crystals | 28.01 |
| Cyanide destruction and effluent treatment plant | Treats cyanide-bearing water before discharge | 28.01 |
| Assay laboratory with XRF analyser | Checks gold content of inputs and every lot | 24.01 |
| Fume extraction and alkaline scrubber | Captures fumes from the process area | 20.01 |
| Vacuum dryer | Dries crystals at low temperature | 16.01 |
| Strong room and security system | Stores gold and finished salt safely | 16.01 |
| Deionised water plant | Supplies pure water for the process | 10.01 |
| Precision balances and packing equipment | Weighs and seals each bottle | 10.01 |
| Total plant and machinery | 200.11 | |
Costs are the sample report's estimates for a 160 grams per day plant. Get current quotations before you finalise.
Licences and approvals for a gold salt plant
Cyanide puts this product in the strictest bracket of approvals. Start the pollution and hazardous chemical paperwork before you order machinery, as site approval comes first.
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board. Hydrocyanic acid and its derivatives appear in the red category list, so expect red category conditions; confirm with your state board |
|---|---|
| Hazardous chemicals | Potassium cyanide is listed in Schedule 1 of the Manufacture, Storage and Import of Hazardous Chemical Rules, 1989. Duties include safety data sheets, labelling of every container and reporting any major accident |
| Hazardous waste | Authorisation from the State Pollution Control Board under the Hazardous and Other Wastes Rules, 2016, applied for in Form 1 and valid for five years, for cyanide-bearing sludge and residues |
| Poisons licence | State rules under the Poisons Act, 1919 can require a licence from the District Magistrate to possess or sell scheduled poisons; check whether your state's schedule covers cyanides |
| Factory and fire | Factory licence where the worker threshold applies, and a fire NOC; rules vary by state |
| Business registration | Udyam (MSME) registration and GST registration |
Who buys gold salt in India?
Demand comes from electroplaters. Connector, relay and circuit board makers need hard, thin gold layers for contacts; the imitation jewellery, watch and pooja article trades want a bright decorative finish. Buyers order in small, frequent lots and judge a supplier on gold content, purity and delivery.
Many plants run two models side by side: selling salt made from their own gold, and converting gold that a plater supplies for a per-gram charge. Conversion work needs far less working capital, so a report should show both.
- Electronics and connector plating shops
- Printed circuit board manufacturers
- Imitation and fashion jewellery platers
- Watch, pen and accessory component platers
- Plating chemical distributors
Why assay certificates win repeat orders: platers work out bath additions from the stated gold content. A lot that is short on gold shows up as thin plating and rejected parts, and the buyer rarely comes back.
Mistakes that weaken a gold salt project report
- A fixed selling price with no link to gold
Gold salt is priced off the gold rate plus a conversion premium. Projections should show the premium per gram and test a fall in gold price on stock in hand.
- Ignoring gold held in the circuit
Gold sits in cells, liquors and filters at all times. The sample carries 5 days of work in progress; leaving it out understates working capital.
- Treating effluent as an extra
Cyanide destruction and gold recovery are central to consent. In the sample the effluent plant costs as much as the crystalliser.
- Long credit to platers
Each day of credit locks up gold value. The sample allows 7 days; dealer-style 45 days would multiply the cash credit need.
- No budget for security and insurance
A strong room, CCTV, gold-in-transit cover and stock insurance are lender requirements, not options.
How NPCS helps you set up a gold salt plant
- Capacity and business modelSize the plant and balance own-gold sales against conversion work.
- Process and equipmentCompare electrolytic and chemical routes and line up machinery quotations.
- Bank-ready project reportGold-linked projections, working capital, DSCR and break-even in your lender's format.
- Approvals and layoutRed category consent, hazardous chemical and waste compliance, and a safe plant layout.
NPCS, led by founder Ajay Kumar Gupta, has prepared project reports and feasibility studies since 1994; its client list shows 116 assignments in metal products alone.
What's inside the gold salt sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Find NPCS project reports in your budget
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Gold Salt project report: frequently asked questions
What is the cost of a gold salt manufacturing plant in India?
Our sample report models a 160 grams per day plant at a total project cost of ₹420.50 lakh, with ₹200.11 lakh in plant and machinery. The gold itself is bought out of working capital, mostly funded by a ₹121.56 lakh cash credit limit. Your own cost depends on capacity, whether you buy gold or convert customer gold, and the effluent and security set-up your state requires.
Is gold salt the same as gold potassium cyanide?
Yes. In the plating trade, gold salt almost always means gold potassium cyanide, also called potassium gold cyanide, potassium dicyanoaurate, GPC or PGC. It is a white crystalline powder with about 68% gold by weight. Platers dissolve it to make or top up gold plating baths for electronics, jewellery and watch parts.
How much gold is needed to make 1 kg of gold salt?
About 683 grams of fine gold go into each kilogram of gold potassium cyanide, because the salt is roughly 68.3% gold. Process losses are small but real, so plants recover gold from mother liquor, rinse water and filters. In our sample, fine gold makes up 97% of raw material cost, and raw materials take 90.9% of sales.
Is gold salt manufacturing profitable?
It can be, but the margin is a thin conversion charge on a very costly input. In our illustrative sample, the plant earns a 32% return on investment in Year 3, breaks even at 31% of capacity and pays back in about 2.8 years. Real results depend on the premium you charge over gold value, gold losses and how fast gold turns over.
Which licences are needed to make gold salt?
You need consent to establish and operate from the State Pollution Control Board and a hazardous waste authorisation for cyanide-bearing residues. The plant must also follow the Manufacture, Storage and Import of Hazardous Chemical Rules, which list potassium cyanide. Some states also need a poisons licence for cyanide. Udyam, GST, a factory licence and fire NOC complete the basic list.
Is the gold salt for rheumatoid arthritis the same product?
No. Medical gold salts such as sodium aurothiomalate are thiolate compounds once injected for rheumatoid arthritis and are now rarely used. They are pharmaceutical products and a different project altogether. This page and our sample cover gold potassium cyanide, the plating salt that industrial buyers mean when they ask for gold salt.
Is the sample gold salt project report PDF free and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so do not submit it to a bank. For a loan, NPCS prepares a report for your own capacity, location, gold sourcing model and lender.
Sources and references
- The Manufacture, Storage and Import of Hazardous Chemical Rules, 1989Punjab Pollution Control Board (rules notified by the Ministry of Environment and Forests), checked Oct 2026
- List of red category of industriesPunjab Pollution Control Board, checked Oct 2026
- Hazardous and Other Wastes (Management and Transboundary Movement) Rules, 2016Urban Development Department, Government of Tripura, checked Oct 2026
- Poisons Act, 1919Ministry of Home Affairs, Government of India, checked Oct 2026
- Credit Guarantee Fund Trust for Micro and Small EnterprisesCGTMSE, checked Oct 2026
