What is a forging on open die hammers project report?
A forging on open die hammers project report is a detailed project report (DPR) for a forge that shapes hot steel billets between flat dies. Pneumatic hammers turn them into shafts, flanges, rings and blocks. The report sets out the process, hammers and furnaces, steel inputs, buyers, project cost, finance, five-year projections, DSCR and break-even.
Promoters use it to size the forge and raise a term loan; banks use it to judge whether job-order forging income can repay the loan.
Also known as: open die forging project report, hammer forging unit project report, smith forging plant DPR, forging on open die hammers business plan.
Forging on open die hammers plant cost and economics
Our sample report models a forge making 5.5 metric tonnes (MT) of finished forgings per day, or 1,815 MT a year over 330 working days. It starts at 60% of capacity and reaches 80% in Year 5, selling at ₹1,13,000 per MT.
| Land and site development | 72.79 |
|---|---|
| Building and civil works | 130.09 |
| Plant and machinery | 297.34 |
| Other fixed assets | 38.06 |
| Contingencies | 21.37 |
| Preliminary and pre-operative | 13.99 |
| Working capital margin | 50.10 |
| Total | 623.74 |
| Promoter's contribution (25%) | 155.94 |
|---|---|
| Term loan from bank (75%) | 467.80 |
| Cash credit limit (separate) | 150.28 |
| Total project cost | 623.74 |
DSCR (debt service coverage ratio) is cash available for loan repayment divided by the instalment due. Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
Manufacturing process for forging on open die hammers
An open die forge works to the buyer's drawing, one order at a time. The same hammer and flat dies make a shaft in the morning and a flange in the afternoon; the skill of the hammer crew decides the size and soundness of each piece.
- Cutting to weight
Bars and billets are cut on a bandsaw or shear to the weight of the forging, plus an allowance for scale and trimming.
- Heating
Billets go into an oil or gas fired box furnace and are soaked at about 1,100–1,250°C for carbon steel, so they deform without cracking.
- Upsetting and drawing out
The crew upsets the billet to shorten and thicken it, then draws it out under the hammer to lengthen it, reheating whenever the steel cools below forging range.
- Punching and finishing
Rings and flanges are punched or drifted, and each forging is planished to size, leaving a machining allowance on every face.
- Heat treatment
Forgings are normalised, or hardened and tempered, to reach the hardness and strength set in the drawing.
- Shot blasting and inspection
Scale is blasted off, then sizes and hardness are checked and ultrasonic testing looks for internal cracks and voids.
- Rough turning and dispatch
Where the order asks for it, forgings are rough turned, marked with the heat number and dispatched with a test certificate.
Open die or closed die forging: which suits your plant?
The choice decides what you buy, who you sell to and how much tooling money you tie up. Many entrepreneurs see "forging" as one business, but the two routes serve different buyers.
| Point | Open die hammer forging | Closed die forging |
|---|---|---|
| Dies | Flat or simple dies that fit many jobs | A cavity die cut for each part |
| Typical work | Shafts, flanges, rings, blocks, gear blanks | Automobile and tractor parts, hand tools |
| Batch size | One piece to a few hundred | Thousands of identical pieces |
| Tooling cost per order | Low | High, recovered over long runs |
| Machining allowance | Larger, as the shape is approximate | Smaller, close to final shape |
| What sells the work | Grade range, weight range and fast delivery | Price per piece and supply contracts |
Steel grades and raw materials for open die forging
Steel is bought as round or square bars and billets in the grade the buyer names. EN8 or C45 is common for general shafts, and EN19 or EN24 for parts that are hardened and tempered. Every bar should come with a mill test certificate, because the forge's own certificate depends on it.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Carbon steel bars and billets | 62% | 523.51 |
| Alloy steel bars and blooms | 32% | 270.20 |
| Quenching oil and heat treatment consumables | 3% | 25.33 |
| Forging lubricants and tool consumables | 3% | 25.33 |
| Total | 100% | 844.37 |
Raw materials are 58.8% of sales in the sample. Steel prices move often, so price each order on the day's bar rate.
Hammers and machinery for an open die forge
The hammer set is the largest single item in the sample, at about a third of the machinery cost. Pneumatic hammers carry their own compressor, so they need no separate air plant.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Pneumatic open die forging hammer set | Upsets, draws out and shapes hot billets | 95.15 |
| Oil or gas fired forging furnaces | Heat billets to forging temperature | 41.63 |
| Heat treatment furnace with quench tank | Normalising, hardening and tempering | 38.66 |
| Rail-bound manipulator and jib cranes | Hold and turn hot work under the hammer | 35.68 |
| Bandsaw and billet shearing machine | Cut bars to forging weight | 20.81 |
| EOT crane | Moves steel and forgings around the shop | 20.81 |
| Testing lab with ultrasonic flaw detector | Checks hardness and internal soundness | 17.84 |
| Shot blasting machine | Removes scale before inspection | 14.87 |
| Lathe for rough turning | Rough machines forgings on request | 11.89 |
| Total plant and machinery | 297.34 | |
Costs are the sample report's estimates. Get current quotations for your hammer sizes before you finalise.
Fuel, power and manpower for a hammer forge
Heating is where most of a forge's energy goes. The Pune forging cluster study by TERI for SIDBI puts heating at 80–90% of energy use, with hammers, presses and compressors taking the rest.
| Furnace fuel | Furnace oil, light diesel oil, natural gas or LPG; induction heating for smaller bars where power is cheap |
|---|---|
| Power and fuel cost | ₹107.96 lakh in Year 3 of the sample, 7.5% of sales |
| Manpower | 36 people in the sample, including 13 skilled workers such as hammer drivers, furnace men and heat treaters |
| Wage bill | ₹76.80 lakh in Year 1, rising 5% a year |
| Working capital | ₹200.38 lakh in Year 1, mostly buyer credit of 45 days, with 30 days of steel stock |
| Working days | 330 a year in the sample |
Fuel prices and power tariffs vary by state. Your report uses the rates at your site.
Licences and standards for an open die forging unit
| Business registration | Udyam (MSME) registration and GST registration |
|---|---|
| Pollution consent | Consent to establish and operate from the State Pollution Control Board. Forging of ferrous and non-ferrous metals with oil or gas fired furnaces is listed in the Orange category (Odisha SPCB list, checked October 2026) |
| Factory licence | Under the Factories Act where worker and power thresholds apply; rules vary by state |
| Product standard | IS 2004:1991, Carbon steel forgings for general engineering purposes, is the usual Indian reference; many buyers also specify their own drawing and grade |
| Fuel storage | Fire NOC and safe storage for furnace oil or LPG, as the local authority requires |
Who buys open die forgings in India?
Open die forgings go to engineering firms that need strong steel parts in small batches or in sizes too large for closed dies. Most orders come with a drawing, a steel grade and a heat treatment specification, and repeat orders follow good test results and on-time delivery.
- Machinery and machine tool builders
- Valve, pump and pipeline fitting makers
- Gear and transmission makers
- Railway, earthmoving and mining equipment makers
- Maintenance departments of power, steel and sugar plants
- Engineering traders and exporters
Where a new forge wins: maintenance buyers often need a single shaft or ring within days. A forge that keeps common grades in stock and quotes fast can earn better rates than on routine batch work.
Mistakes that weaken a forging project report
- Selling price set on billet weight
Scale, trimming and machining allowance mean finished forging weight is less than steel bought. Revenue must be on finished weight, or profit is overstated.
- Fuel taken at a token figure
A large forging is often reheated more than once before it reaches size. Fuel per tonne should come from the furnace type and reheat count, not a flat guess.
- Hammer size chosen before the product mix
A hammer too small for the heaviest orders turns away work; one too large wastes power on small jobs. Fix the weight range first.
- No heat treatment or testing in the plan
Buyers reject forgings without hardness and ultrasonic reports. Outsourcing both adds cost and days that the projections must show.
How NPCS helps you plan an open die forge
- Product mix and hammer sizingMatch hammer capacity and furnace size to the weights and grades your buyers order.
- Machinery and suppliersCompare hammers, furnaces, manipulators and testing equipment, with current quotations.
- Bank-ready project reportProjections, fuel and yield assumptions, DSCR and working capital in your lender's format.
- Layout and approvalsShop layout for hot work and cranes, power load and the approvals list for your state.
NPCS's client list shows 116 assignments in metal products, and the NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports since 1994.
What's inside the forging on open die hammers sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS forging on open die hammers project reports
These are forging on open die hammers project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Forging ON Open DIE Hammers | 3000 MT/Annum (Steel forging various grade) | ₹18.43 crore | 42% | 55% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Forging on Open Die Hammers project report: frequently asked questions
What is the cost of a forging on open die hammers manufacturing plant in India?
A 5–8 MT per day open die forge with heat treatment and testing on its own land needs roughly ₹5–9 crore. A small job forge with one or two hammers in a rented shed may need ₹1.5–3 crore. These ranges are indicative. Our sample report models a 5.5 MT per day plant at ₹623.74 lakh, including ₹297.34 lakh of plant and machinery.
What is the difference between open die and closed die forging?
Open die forging shapes hot steel between flat or simple dies, so one set of dies can make many shapes and sizes. Closed die forging presses steel into a cavity cut to the part shape. Open die suits small batches, large parts and custom drawings; closed die suits long runs of identical parts such as automobile components.
Which hammer size do I need for open die forging?
Hammer size follows the heaviest forging you plan to make. Small job forges usually start with pneumatic hammers of about 0.5 to 2 tonnes falling weight, which handle bars and billets of moderate section. Heavier shafts and blocks need bigger hammers or a hydraulic press, with a manipulator and crane to handle the work.
Which steel grades are forged on open die hammers?
Most orders are in carbon steels such as EN8 and C45 and alloy steels such as EN19 and EN24, with stainless grades for valve and pipeline buyers. In our sample report carbon steel bars and billets are 62% of raw material cost and alloy steel 32%. The buyer's drawing fixes the grade and the heat treatment.
Is an open die forging unit profitable?
In our illustrative sample, a 5.5 MT per day forge earns a 24% return on investment in Year 3. It breaks even at 38% of capacity and pays back in about 3.4 years. Real results depend on steel buying, furnace fuel cost, yield from billet to finished forging and how quickly buyers pay.
Can I get a bank loan or CGTMSE cover for a forging unit?
Banks fund forging units as MSME term loans with a cash credit limit for working capital. Eligible micro and small enterprises can get collateral-free guarantee cover under CGTMSE, whose ceiling is ₹10 crore per borrower from 1 April 2025. The bank decides eligibility after appraising the project report, so confirm terms with your lender.
Is the sample report free and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own hammer sizes, location and lender.
Sources and references
- List of industries under the Orange category (forging of ferrous and non-ferrous metals using oil and gas fired furnaces, Sl. No. 32)State Pollution Control Board, Odisha, checked Oct 2026
- Product manual circular for IS 2004:1991, Carbon steel forgings for general engineering purposesBureau of Indian Standards, checked Oct 2026
- Cluster profile report: Pune forging clusterTERI for SIDBI, checked Oct 2026
- Credit Guarantee Scheme for Micro and Small Enterprises: scheme guidelinesOffice of the Development Commissioner (MSME), checked Oct 2026
