What is a erw steel pipes project report?
An ERW steel pipes project report is a detailed project report (DPR) for a pipe mill. The mill slits hot rolled (HR) steel coil, rolls it into a tube and welds the seam electrically. It covers the process, tube mill, testing equipment, raw materials, BIS licence, project cost, finance, five-year projections, DSCR and break-even.
Promoters use it to size the mill and raise a term loan; banks use it to judge whether thin pipe margins can carry the debt.
Also known as: project report on ERW steel pipes, ERW pipe plant project report, MS pipe manufacturing project report, ERW tube mill DPR, ERW pipe business plan.
ERW steel pipes manufacturing plant cost in India
Our sample report models a 17 MT per day mill running 330 days a year, starting at 60% of capacity and reaching 80% in Year 5. Pipes sell at ₹61,300 per MT ex-factory, and the all-in cost in Year 3 works out to about ₹57,292 per MT.
| Land and site development | 38.52 |
|---|---|
| Building and civil works | 160.64 |
| Plant and machinery | 365.09 |
| Other fixed assets | 35.52 |
| Contingencies | 26.29 |
| Preliminary and pre-operative | 15.65 |
| Working capital margin | 86.67 |
| Total | 728.38 |
| Promoter's contribution (25%) | 182.10 |
|---|---|
| Term loan from bank (75%) | 546.28 |
| Cash credit limit (separate) | 260.01 |
| Total project cost | 728.38 |
Why the margin is thin: a pipe mill converts coil into pipe, so the gap between coil cost and pipe price is the business. In the sample, raw material alone is 70.2% of sales, and the lowest yearly DSCR is 1.32.
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
ERW steel pipes manufacturing process
An ERW line is continuous: strip goes in at one end and cut pipe comes out the other. Once the mill is set for a size, output depends on line speed and how few stoppages you have.
- Slitting
Wide HR coil is slit into narrow strips, each as wide as the circumference of the pipe size planned for the next run.
- Uncoiling and strip joining
Strip ends are sheared square and butt welded to the next coil, while an accumulator stores strip so the mill keeps running during the join.
- Forming
Breakdown and fin-pass roll stands bend the flat strip step by step into an open round tube with its edges facing each other.
- High frequency welding
An induction coil heats the strip edges to welding temperature and squeeze rolls press them together, forming the seam without any filler metal.
- Bead scarfing and sizing
A tool cuts away the outer weld bead, the seam cools under water spray, and sizing stands bring the pipe to its exact outside diameter.
- Flying cut-off
A saw that travels with the moving pipe cuts it to the set length, usually 6 metres, without stopping the line.
- Finishing and testing
Ends are faced or bevelled, every pipe is hydro tested, and samples go through bend, flattening and tensile tests in the plant laboratory.
- Marking and bundling
Pipes are oiled or varnished, stencilled with size, class and standard mark, and strapped into hexagonal bundles for dealers.
ERW, HFIW or SMLS: choosing the route for your plant
Most new pipe projects in the MSME range choose an ERW mill with high frequency induction welding (HFIW). The bigger choices are the size range, whether to slit coil in-house, and which product classes to sell.
| ERW versus SMLS (no weld) | ERW pipe is welded from strip and costs less per tonne; SMLS pipe is pierced from solid billet and needs far heavier plant. New small and mid-size units almost always choose ERW. |
|---|---|
| Induction or contact welding | HF induction welding uses a coil around the tube and suits small and medium diameters. Contact welding with sliding electrodes is more common on larger diameters and thicker walls. |
| Size range of the mill | Each mill covers a band of diameters. A ½ to 2 inch mill serves plumbing and furniture tube; 2 to 6 inch mills serve water mains and structural work and cost much more. |
| Slit in-house or buy slit coil | A slitting line adds capital cost but lets you buy wide coil from mills and cut it to any width, which helps when you change sizes often. |
| Round pipe or hollow sections | Adding square and rectangular shaping rolls lets the same mill sell hollow sections to fabricators, at the cost of more roll sets and changeovers. |
| Black or galvanised | Black pipe is sold oiled or varnished. Galvanising needs pickling and a zinc bath, which raises cost, effluent handling and the pollution category. |
Raw material for ERW pipes: HR coil and strip
HR coil comes from integrated steel plants and their service centres in grades suited to welded tubes. Its price can move several thousand rupees a tonne within a month, so mills buy against firm orders and hold about 30 days of stock.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| HR steel coil and slit strip | 96% | 1,623.17 |
| Welding consumables and impeder ferrite | 1% | 16.91 |
| Coolant, rust preventive oil and paint | 3% | 50.72 |
| Total | 100% | 1,690.80 |
The impeder is a ferrite rod placed inside the tube at the weld point; it focuses the welding current and wears out regularly.
Machinery for an ERW pipe plant
The tube mill with its forming and sizing stands is the largest item, followed by the high frequency welder and the slitting line. Every pipe size needs its own set of rolls, so roll sets are a recurring cost as you widen the range.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Slitting line with decoiler and recoiler | Cuts wide coil into strip | 51.11 |
| Uncoiler with shear and end welder | Feeds and joins strip coils | 21.91 |
| Strip accumulator | Keeps the mill running during joins | 25.56 |
| ERW tube mill with roll sets | Forms and sizes the tube | 127.78 |
| High frequency induction welder | Welds the seam | 65.72 |
| Flying cut-off saw | Cuts moving pipe to length | 21.91 |
| End facing and bevelling machine | Squares and bevels pipe ends | 14.60 |
| Hydrostatic pipe testing machine | Pressure tests every pipe | 18.25 |
| Testing laboratory with UTM | Tensile, bend and flattening tests | 18.25 |
| Total plant and machinery | 365.09 | |
Costs are the sample report's estimates for a 17 MT per day line. Get current quotations before you finalise.
Manpower and power for an ERW pipe mill
The HF welder, mill drives and slitting line make power the largest running cost after coil. In our sample, power and fuel cost ₹151.61 lakh in Year 3, about 6.3% of sales, and the plant needs 51 people.
| Category | Number | Annual cost (₹ lakh) |
|---|---|---|
| Management, supervision and administration | 8 | 29.28 |
| Skilled workers and operators | 18 | 42.12 |
| Semi-skilled and unskilled workers | 25 | 39.00 |
| Total | 51 | 110.40 |
Skilled roles include mill operators, roll setters, welder technicians and a testing chemist. Wages rise 5% a year in the projections.
BIS licence and approvals for an ERW pipe plant
Pipes and tubes under the Steel Tubes (Quality Control) Order, 2020 can be sold only with the BIS Standard Mark. Plan the licence and the testing laboratory before trial production.
| BIS licence (mandatory) | Steel Tubes (Quality Control) Order, 2020, in force from 1 August 2020: IS 1239 Part 1 steel tubes, IS 1161 structural tubes and IS 4270 water well tubes |
|---|---|
| IS 1239 Part 1 scope | Light, medium and heavy class tubes from 15 mm to 150 mm nominal bore, black or galvanised, made from HR strip to IS 10748 or CR strip to IS 513 |
| Tests the plant must run | Leak-proof hydrostatic test on every tube, plus tensile, bend (up to 50 mm bore) and flattening (above 50 mm bore) tests on samples from each lot |
| Laboratory equipment | Hydro tester, universal testing machine, hydraulic press for flattening, gauges and micrometers, and access to chemical analysis |
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board; the category is higher if you pickle or galvanise on site |
| Other approvals | Udyam and GST registration, factory licence, fire NOC and an industrial power connection for the connected load |
Checked against BIS and Ministry of Steel documents in October 2026. Confirm the current list with BIS before applying.
Who buys ERW steel pipes in India?
Demand comes from water supply and plumbing, building and shed construction, fencing and railings, furniture frames and automobile parts. Large branded mills publish list prices that dealers watch closely, so a new unit rarely wins on price alone.
- Pipe and hardware dealers and stockists
- Water supply and plumbing contractors
- Steel fabricators and shed builders
- Furniture and automobile component makers
- Borewell and irrigation suppliers
- Government departments and PSU tenders
Where a regional mill wins: pipes are bulky, so freight adds up. A mill near its dealers can deliver mixed sizes in a few days and keep the sizes its market buys most in stock.
Mistakes that weaken an ERW pipe project report
- Selling price taken from branded list prices
Branded mills command a premium; a new unit usually realises less per tonne, and a few hundred rupees decide the DSCR.
- No allowance for mill scrap
Slitting edge trim, end crops, cut-off losses and start-up pipes all reduce saleable output; the report should show yield and scrap income.
- One roll set for many sizes
Each diameter needs its own forming and sizing rolls, and each changeover costs mill hours. Budget for the product mix you plan to sell.
- Coil price risk not tested
HR coil is 96% of raw material cost in the sample, so a small coil price move can erase the margin. Lenders expect a sensitivity test.
- Dealer credit left out of working capital
In the sample, trade receivables at 45 days are the largest current asset, ahead of coil stock. Without them the cash credit limit falls short.
How NPCS prepares your ERW steel pipes project report
- Size range and capacityPick the diameter band, wall thickness and daily output that suit your market and budget.
- Tube mill and lab selectionCompare mill, welder and testing equipment specifications and get quotations.
- Bank-ready project reportCoil price sensitivity, projections, DSCR and working capital in your lender's format.
- BIS and plant layoutPlan the line layout, power load and the approvals list for your state, including the BIS licence.
NPCS's client list includes 116 assignments in metal products, and the NPCS project team has prepared project reports for steel and metal units since 1994.
What's inside the erw steel pipes sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
18 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS erw steel pipes project reports
These are erw steel pipes project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| ERW Steel Pipes | 12 MT/Day | ₹4.16 crore | 36% | 53% | Get this report |
| ERW Steel Conduit Pipes (Black Pipes) | 15.00 MT/day | ₹6 crore | 58% | 35% | Get this report |
| ERW Steel Pipes | 180000/annum | ₹30.44 crore | 67.2% | 31.8% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
ERW Steel Pipes project report: frequently asked questions
How much does it cost to set up an ERW pipe plant in India?
A small mill making ½ to 2 inch pipes at 10–25 MT per day needs roughly ₹5–10 crore, including land, building and working capital margin. Larger mills for 4 to 8 inch pipes at 100 MT per day or more can need ₹30–60 crore. These are indicative ranges. Our sample report models a 17 MT per day plant at ₹728 lakh.
What raw material is used to make ERW pipes?
Hot rolled (HR) steel coil, slit into strip of the right width, is the main raw material. In our sample report it is 96% of raw material cost, and total raw material is 70.2% of sales. Small consumables such as impeder ferrite, coolant, rust preventive oil and paint make up the rest.
Is BIS certification mandatory for ERW pipes?
Yes, for the products in the Steel Tubes (Quality Control) Order, 2020. It has applied since 1 August 2020 to steel tubes under IS 1239 Part 1, structural tubes under IS 1161 and water well tubes under IS 4270. These pipes must carry the BIS Standard Mark under a BIS licence. Goods made only for export are exempt.
What is the difference between ERW and SMLS pipes?
An ERW pipe is made by rolling flat steel strip into a tube and welding the seam, so it has one longitudinal weld. An SMLS pipe is pierced from a solid round billet and has no weld at all. ERW pipes cost less and hold tighter wall thickness. SMLS pipes are used where very high pressure or temperature rules out a weld.
Is ERW pipe manufacturing profitable?
It can be, but margins per tonne are thin because HR coil is most of the cost. In our illustrative sample, a 17 MT per day plant earns a 16% return on investment in Year 3. It breaks even at 47% of capacity and pays back in about 4.3 years. Coil buying, mill yield and dealer credit decide the actual result.
Which loan or scheme suits an ERW pipe project?
Most ERW pipe plants are funded with a bank term loan for fixed assets and a cash credit limit for coil stock and debtors. Micro and small enterprises can ask the bank for CGTMSE cover, whose guarantee ceiling is ₹10 crore. The bank still decides the loan on the project report, projections and DSCR, so confirm terms with your lender.
Is the ERW steel pipes project report PDF free, and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not from a real project, so it should not be given to a bank. For a loan, NPCS prepares a report for your own pipe sizes, capacity, location and lender.
Sources and references
- Steel Tubes (Quality Control) Order, 2020, S.O. 281(E)Department for Promotion of Industry and Internal Trade, published by the Bureau of Indian Standards, checked Oct 2026
- Product manual for steel tubes to IS 1239 (Part 1)Bureau of Indian Standards, checked Oct 2026
- Quality control orders for steel productsMinistry of Steel, Government of India, checked Oct 2026
- Credit Guarantee Fund Trust for Micro and Small EnterprisesCGTMSE, checked Oct 2026
- Revised categorisation of industries (Red, Orange, Green, White, Blue)Maharashtra Pollution Control Board, checked Oct 2026
