WhatsApp us
Request a Quote

Project reports in Metal Products

Copper Wire Drawing Enamelling Plant Project Report

Plant cost, machinery, copper and enamel inputs and five-year profitability for a winding wire plant, with a free sample project report PDF you can open now.

Plant capacity
830 kg per day
Total project cost
₹639 lakh
Plant and machinery
₹295 lakh
Return on investment
25% (Year 3)
Break-even
46% of capacity
Payback period
About 3.4 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a copper wire drawing enamelling project report?

A copper wire drawing enamelling project report is a detailed project report (DPR) for a plant that draws 8 mm copper rod to winding gauges and coats it with enamel. It sets out the process, machinery, copper and enamel needs, project cost, finance, five-year projections, DSCR and break-even that a lender reviews.

Promoters use it to size the plant and raise a term loan; banks and investors use it to check whether the conversion margin can service the debt.

Also known as: enamelled copper wire project report, winding wire manufacturing project report, copper wire drawing enamelling business plan, project report on copper wire drawing enamelling.

Copper wire drawing enamelling plant cost in India

Our sample report models a plant that draws and enamels 830 kg of copper wire a day, or 2,73,900 kg a year at full capacity over 330 working days. It starts at 60% capacity, reaches 80% in Year 5 and sells mixed gauges at ₹1,680 per kg, ex-GST.

₹639 lakhTotal project cost
₹3,221 lakhSales in Year 3
₹159 lakhNet profit in Year 3
1.93Average DSCR
Cost of project (₹ lakh)
Land and site development46.08
Building and civil works148.66
Plant and machinery295.37
Other fixed assets25.05
Contingencies22.20
Preliminary and pre-operative13.43
Working capital margin88.52
Total639.31
Means of finance (₹ lakh)
Promoter's contribution (25%)159.83
Term loan from bank (75%)479.48
Cash credit limit (separate)265.56
Total project cost639.31

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.

Copper wire drawing enamelling manufacturing process

The plant turns 8 mm copper rod into insulated winding wire in seven stages. Drawing and enamelling are separate lines, so a stock of bare wire between them keeps the ovens running when a drawing machine stops.

  1. Rod breakdown

    A multi-die rod breakdown machine reduces the 8 mm rod to an intermediate size of about 1 to 2.5 mm, cooled by soluble oil emulsion.

  2. Fine drawing

    Intermediate and fine drawing machines pull the wire through carbide or diamond dies to the exact bare diameter the customer has ordered.

  3. Inline annealing

    Drawing hardens copper, so the wire passes through a steam or inert gas tube at the start of the enamelling line to recover softness and elongation.

  4. Enamel coating

    The wire takes several thin coats of liquid enamel through dies or felts, because many thin coats give fewer pinholes than one thick coat.

  5. Curing

    After each coat the wire passes through the oven to drive off solvent and cure the resin. A catalytic converter burns the solvent vapour and feeds heat back to the oven.

  6. Testing

    Samples from each spool are tested for diameter, elongation, breakdown voltage, pinholes and heat shock against the IS 13730 series.

  7. Spooling and packing

    Wire is wound on plastic spools by gauge and grade, labelled with the lot number and packed in cartons.

Which plant route and enamelling machine should you choose?

The biggest decision is how far back you start: from bare wire, from copper rod or from cathode. The gauge range you plan to sell then decides the type of enamelling machine.

Enamelling onlyBuys bare drawn wire and only coats it. Lowest machinery cost, but you pay another unit's drawing charge and depend on its gauge accuracy and surface finish.
Drawing and enamellingStarts from BIS-marked 8 mm rod and controls drawing, annealing and coating in one plant. This is the route our sample report models.
Rod casting, drawing and enamellingAdds a casting line that makes rod from cathode or clean scrap. It suits large plants with assured cathode supply and needs far more capital and power.
Horizontal enamelling machinesGenerally used for fine and medium gauges, with many wires running side by side through a long oven.
Vertical enamelling machinesGenerally used for heavier gauges, where the wire's own weight makes a vertical pass easier to control.
Enamel systemPolyester-imide base coats with a polyamide-imide overcoat are common for motors that run hot; solderable polyurethane enamels suit small coils that are soldered without stripping.

Line speed and oven capacity vary by machine make. Confirm them with suppliers for your gauge mix.

Raw materials for enamelled copper wire

Copper rod is almost the whole raw material bill, so a plant's margin depends on how it buys and prices copper. The Copper Products Quality Control Order covers copper wire rods for electrical applications (IS 12444), so buy BIS-marked electrolytic rod.

Raw materialShare of costYear 3 (₹ lakh)
Electrolytic copper wire rod 8 mm95%2,162.87
Wire enamels and overcoat4%91.07
Drawing lubricants and solvents1%22.77
Total100%2,276.71

Machinery for a wire drawing and enamelling plant

The enamelling machines are the largest item, at 40% of the machinery cost in our sample. The fume incinerator and test laboratory are small items, but a plant cannot get consent or buyer approval without them.

MachineWhat it doesSample cost (₹ lakh)
Rod breakdown machine with inline annealerDraws 8 mm rod to intermediate size53.17
Intermediate and fine wire drawing machinesDraw wire to the final bare gauge41.35
Horizontal enamelling machines with inline annealingAnneal, coat and cure the wire118.15
Catalytic fume incineration systemBurns solvent vapour from the ovens17.72
Die polishing and maintenance equipmentKeeps drawing dies to size11.82
Winding wire testing laboratoryBreakdown voltage, pinhole and elongation tests17.72
Rewinding and spooling machinesWind finished wire on spools by gauge17.72
Compressor, chiller and electrical panelsAir, cooling water and power distribution17.72
Total plant and machinery295.37

Costs are the sample report's estimates for an 830 kg per day plant. Get current quotations before you finalise.

Licences and standards for a winding wire plant

Business registrationUdyam (MSME) registration and GST registration
Raw material standardCopper wire rod for electrical use must carry the BIS Standard Mark (IS 12444) under the Copper Products Quality Control Order
Product standardThe IS 13730 series covers winding wires; IS 13730 (Part 0/Sec 1): 2018 sets general requirements for enamelled round copper wire
Pollution board consentConsent to establish and operate from the State Pollution Control Board. Odisha lists wire drawing in its Orange category; the board will also ask how oven solvent fumes are treated
Factory licenceRegistration under the Factories Act or the state's labour law where worker and power thresholds apply
Fire safety NOCNeeded where the plant stores enamels and solvents in quantity; rules vary by state

Pollution categories and licence rules differ by state. Confirm them with your state board and BIS before you apply.

Who buys enamelled copper winding wire?

Every motor, transformer, fan and pump has a coil of enamelled wire inside, so demand follows electrical equipment, appliance and power distribution spending. Large buyers approve a new supplier only after trial lots pass their tests. So a new plant usually starts with rewinders and dealers, then adds orders from OEMs (original equipment makers).

  • Motor and pump manufacturers
  • Distribution and power transformer makers
  • Fan and household appliance makers
  • Electrical dealers and rewinding workshops
  • Makers of chokes, relays and ballasts

Sell the conversion, not the copper: buyers price winding wire as the day's copper cost plus a conversion charge per kg. Quote that way and buy rod against confirmed orders, so a fall in copper prices does not wipe out the margin on stock you already hold.

Mistakes that weaken a copper wire drawing enamelling project report

  • Treating copper as a fixed price

    Copper moves every day. The report should show margin as conversion per kg and test how a copper price swing changes working capital and profit.

  • Under-sizing working capital

    In our sample, the Year 1 working capital need of ₹354.08 lakh is larger than the plant and machinery cost, and buyer credit is the biggest part of it.

  • Ignoring yield and scrap

    Wire breaks, start-up lengths and rejected spools are sold back as scrap below rod price; saleable output must allow for this loss.

  • Leaving out fume treatment

    Enamel solvents have to be burnt. A cost estimate without a catalytic incinerator understates capital and puts pollution consent at risk.

  • Booking OEM sales from month one

    Motor and transformer makers take time to approve a vendor. Early-year sales should rely on dealers and rewinders at lower conversion rates.

How NPCS helps you set up a copper wire drawing and enamelling plant

  • Plant route and gauge mixDecide between enamelling only and full drawing and enamelling, and the gauges and thermal classes to sell.
  • Machinery and line sizingMatch drawing and enamelling machine capacity, oven lines and fume treatment to your output.
  • Bank-ready project reportProjections, copper-linked working capital and DSCR in the format your lender wants.
  • Approvals and layoutPlant layout, power load, BIS rod sourcing and the approvals list for your state.

NPCS's client list records 116 assignments in metal products, including one for this product. The NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports since 1994.

What's inside the copper wire drawing enamelling sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

18 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS copper wire drawing enamelling project reports

These are copper wire drawing enamelling project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Copper Wire Drawing, Annealing & Enamelling1 MT / day₹2.09 crore47%34% Get this report
Copper ROD Casting, Wire Drawing AND Enamelling6300 MT/Annum₹11.26 crore45%53% Get this report
Copper Wire Drawing & EnamellingCopper Wire (0.914 to 0.376 mm), 350 Kgs per day Enamelled Copper Wire (0.914 to 0.376 mm), 350 Kgs per day Intermediate Copper Wire (2.5 mm…₹12.33 crore28%46% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Copper Wire Drawing Enamelling project report: frequently asked questions

What is the cost of a copper wire drawing enamelling plant in India?

Our sample report models an 830 kg per day plant at ₹639 lakh, including ₹295 lakh of plant and machinery and ₹88.52 lakh of working capital margin. An enamelling-only unit that buys bare wire needs less machinery but still ties up heavy working capital in copper. Your own report works out the cost for your gauge mix, capacity and location.

What is the manufacturing process for enamelled copper wire?

The 8 mm copper rod is drawn to an intermediate size on a rod breakdown machine, then drawn to the final gauge. The wire is annealed in line, coated with several thin layers of enamel and baked after each coat. Finished wire is tested for breakdown voltage, pinholes and elongation, then wound on spools by gauge.

Is copper wire drawing and enamelling profitable?

In our illustrative sample, the plant earns a 25% return on investment in Year 3, breaks even at 46% of capacity and pays back in about 3.4 years. Real profit depends on the conversion charge you can get over copper, scrap and yield losses, power cost and how many days of credit your buyers expect.

Which raw materials are needed for enamelled copper wire?

Electrolytic copper wire rod of 8 mm is the main input, about 95% of raw material cost in our sample report. Wire enamels and overcoat make up about 4%, and drawing lubricants and solvents the remaining 1%. Copper wire rod for electrical use falls under the Copper Products Quality Control Order, so buy BIS-marked rod.

Do I need BIS certification for a winding wire unit?

The Copper Products Quality Control Order makes the BIS Standard Mark compulsory for copper wire rods for electrical applications (IS 12444), so your raw material must carry it. Enamelled round copper winding wire is specified in the IS 13730 series. Check the current BIS list before launch, since quality control orders are revised from time to time.

Can I get a PMEGP loan for a copper wire enamelling unit?

PMEGP covers manufacturing projects up to ₹50 lakh, so a full drawing and enamelling plant like our sample is usually outside it. Most promoters take a bank term loan for fixed assets and a cash credit limit for copper stock and debtors. Lenders ask for a project report with projections, working capital and DSCR before they sanction.

Is the sample report free and can I use it for a bank loan?

Yes, the sample is free to view and download as a PDF. It shows the format and depth of an NPCS report. Its figures are illustrative and not taken from a real project, so do not submit it to a bank. For a loan, NPCS prepares a report for your capacity, location and lender.

Sources and references

  1. IS 13730 (Part 0/Sec 1): 2018, winding wires: general requirements, enamelled round copper wireBureau of Indian Standards, checked Oct 2026
  2. Copper Products (Quality Control) Order, 2023, S.O. 4595(E)Department for Promotion of Industry and Internal Trade, Gazette of India, checked Oct 2026
  3. List of Orange category industriesState Pollution Control Board, Odisha, checked Oct 2026
  4. Prime Minister's Employment Generation Programme (PMEGP) guideDistrict Industries Centre, Ganjam, Government of Odisha, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different metal products project?

These are a few of the projects we advise on. NPCS's published client list records 116 metal products assignments, so tell us what you are planning.

Tell us your project

Recent metal products assignments

  • Long Island Trading Co. Pvt. Ltd
    Project Report on Aluminium Can Manufacturing Plant SetupIndore, 2026
  • Allotrope Engineers
    Bankable Project Report on Gas Atomized Aluminium PowderHyderabad, 2026
  • P M Infrastructure Private Limited
    Comprehensive Market Research Report on TMT BarsBangalore, 2026
  • Arham Recycling Private Limited
    Pre-Feasibility Report on Copper Wire RecyclingFaridabad, 2026
  • Bihar Foundry & Castings Limited
    Industrial Project Report on Electrolytic Manganese MetalRanchi, 2026
  • Rgcon Itm
    Comprehensive Project Report on Copper CathodeVisakhapatnam, 2026
  • Krishnay Recycling Pvt Ltd
    Pre-Feasibility Report on Project Planning and Feasibility Report on Copper Cathode and CoSouth Africa, 2026
  • Goodluck India Ltd
    Techno-Economic Project Report on Inner Grooved Copper TubesSikandrabad, 2025

Get a copper wire drawing enamelling project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Copper Wire Drawing Enamelling Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free copper wire drawing enamelling sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Copper Wire Drawing Enamelling sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp