What is a copper sulphate project report?
A copper sulphate project report is a detailed project report (DPR) for a plant that dissolves copper scrap in sulphuric acid and crystallises blue copper sulphate pentahydrate. It sets out the process, machinery, raw materials, licences, market, project cost, means of finance, five-year projections, DSCR and break-even that a bank needs to assess the plant.
Promoters use it to size the plant and raise a term loan; lenders and investors use it to judge whether the plant can carry its working capital and repay.
Also known as: copper sulphate manufacturing plant project report, project report on copper sulphate, copper sulphate business plan, blue vitriol plant DPR.
Copper sulphate manufacturing plant cost in India
Our sample report models a plant making 4.1 metric tonnes per day (MT per day) of copper sulphate crystals, or 1,353 MT a year over 330 working days. It starts at 60% of capacity, reaches 80% in Year 5 and sells at ₹3,59,000 per MT.
Copper sulphate is a high-value, low-margin product. Raw materials take 69.3% of sales in the sample, so the plant earns its return on volume and on buying copper well, not on a wide margin per tonne.
| Land and site development | 66.41 |
|---|---|
| Building and civil works | 151.79 |
| Plant and machinery | 308.46 |
| Other fixed assets | 24.74 |
| Contingencies | 23.01 |
| Preliminary and pre-operative | 14.36 |
| Working capital margin | 123.50 |
| Total | 712.27 |
| Promoter's contribution (25%) | 178.07 |
|---|---|
| Term loan from bank (75%) | 534.20 |
| Cash credit limit (separate) | 370.48 |
| Total project cost | 712.27 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. The lowest yearly DSCR (debt service coverage ratio: cash available to repay divided by instalments due) is 1.31. All figures are illustrative.
Copper sulphate manufacturing process
The scrap route turns metallic copper into copper sulphate pentahydrate (CuSO4·5H2O) in eight steps. It runs in batches, and the mother liquor left after crystallisation goes back into the next batch.
- Scrap sorting and shotting
Wire and cable scrap is stripped of insulation and other metals, then melted and poured into water to form porous shot that dissolves faster.
- Dissolution
The shot sits in hot dilute sulphuric acid in lead-lined or acid-proof reactors while air is blown through, because copper does not dissolve in the acid without an oxidant.
- Filtration
The hot, saturated liquor passes through a filter press to remove dirt, undissolved metal and insoluble matter.
- Concentration
Clear liquor is evaporated in lead-lined pans until it reaches crystallising strength.
- Crystallisation
Slow cooling in still vessels grows large blue crystals; fast cooling with stirring gives fine "snow" crystals that dissolve quickly in spray tanks.
- Centrifuging and washing
A basket centrifuge spins off the mother liquor and the crystals get a short water wash.
- Drying and screening
Crystals are dried at low temperature, since overheating drives off the water of crystallisation and turns them pale, then screened by size.
- Testing and packing
Each batch is tested for copper content, lead, iron and insoluble matter and packed in lined HDPE bags.
Which copper feed and crystal size should you choose?
The copper source decides your cost, your purification steps and your effluent. The crystal size decides which buyers you can serve.
| Clean copper scrap or shot (sample route) | Simplest plant and the cleanest liquor. Copper is bought close to metal value, so margins depend on scrap discounts and quick sales. |
|---|---|
| Copper ash, dross or oxide residues | Cheaper copper per kg, but the liquor picks up zinc, iron and lead, so you need extra leaching, purification and testing to meet the 0.003% lead limit for fertiliser grade. |
| Copper-bearing spent liquors | Low-cost copper, but these streams are usually treated as waste. Check with the State Pollution Control Board before you plan on them. |
| Large crystals | Slow cooling in still vessels. Longer batches, simpler equipment. |
| Snow (fine) crystals or powder | Agitated, water-cooled crystallisers. Dissolves fast, which suits spray tanks and micronutrient blending. |
Raw materials for copper sulphate
Copper sulphate pentahydrate is about 25.4% copper by weight. Each tonne of crystals therefore needs about 255 kg of copper and roughly 400 kg of 98% sulphuric acid, plus water, before process losses.
Copper scrap is priced off the copper metal rate and changes daily, while acid is a small, steady cost. Most plants hold about a month of scrap, which ties up more cash than any other stock item.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Copper scrap (wire and cable grade) | 96% | 2,262.63 |
| Sulphuric acid (98%) | 4% | 94.28 |
| Total | 100% | 2,356.91 |
Machinery for a copper sulphate plant
Everything that touches hot acid liquor must be lead-lined, rubber-lined, FRP or polypropylene. The dissolution reactors are the costliest item in the sample at ₹74.03 lakh.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Scrap melting furnace with shotting tank | Turns scrap into porous shot | 30.85 |
| Lead-lined dissolution reactors with air blowers | Dissolve copper in acid with air | 74.03 |
| Acid storage tanks and PP transfer pumps | Store and move acid and liquor | 24.68 |
| Filter press for mother liquor | Removes solids from hot liquor | 21.59 |
| Lead-lined evaporation pans | Concentrate the liquor | 37.01 |
| Water-cooled crystallisers | Grow crystals of the set size | 46.27 |
| Basket centrifuge | Separates crystals from liquor | 24.68 |
| Tray dryer and vibrating screen | Dries and grades crystals | 18.51 |
| Fume scrubber and effluent treatment plant | Captures acid mist, treats bleed liquor | 30.84 |
| Total plant and machinery | 308.46 | |
Costs are the sample report's estimates for a 4.1 MT per day plant. Get current quotations before you finalise.
Licences, standards and grades for copper sulphate
Agricultural grade falls under the Fertiliser Control Order, so a fertiliser grade plant needs a lab that can test copper and lead on every batch.
| Business registration | Udyam (MSME) registration and GST registration |
|---|---|
| Pollution board consent | Consent to establish and consent to operate from the State Pollution Control Board, covering acid fumes and liquor bleed; confirm your category with the board |
| Fertiliser Control Order 1985 | Copper sulphate is a listed micronutrient. A manufacturer files a memorandum of intimation (Form A1); the acknowledgement (Form A2) serves as the authorisation letter |
| Fertiliser grade specification | Copper at least 24.0%, lead at most 0.003%, water-insoluble matter at most 1.0%, soluble iron and aluminium (as Fe) at most 0.5%, pH at least 3.0 |
| Technical grade standard | IS 261:1982 from the Bureau of Indian Standards, which states limits in terms of copper content; BIS has a product manual for certification under it |
| GST | Micronutrient fertilisers under the Fertiliser Control Order moved from 12% to 5% GST in 2025; confirm the rate for technical grade with your CA |
Who buys copper sulphate in India?
Agriculture is the largest outlet. Farmers use it in Bordeaux mixture and copper sprays for grapes, pomegranate, citrus, coffee and tea. Fertiliser companies sell it as a copper micronutrient, so orders build up before the monsoon and the spraying seasons.
Industrial buyers take smaller but steadier volumes and buy on test certificates. Platers and copper refiners use it as an electrolyte, and mines use it to float zinc and lead ores. Feed premix and chemical makers use it as a source of copper.
- Fertiliser and micronutrient companies
- Agrochemical formulators and distributors
- Electroplating, PCB and copper refining units
- Animal feed premix makers
- Mining and ore flotation plants
- Chemical traders and exporters
Price on a copper formula: buyers expect your price to follow the copper rate. Quoting a fixed price for a season while you buy scrap at daily rates is the quickest way to lose money on this product.
Mistakes that weaken a copper sulphate project report
- Under-sizing working capital
Copper is expensive, so stock and debtors are large. In the sample, Year 1 working capital need is ₹493.98 lakh, with trade receivables of ₹359.30 lakh the biggest item. A report that skips this looks fine on paper and runs dry in the first season.
- No copper price sensitivity
A 5% swing in scrap price moves cost far more than any other input. Lenders expect the report to test it against the selling price.
- Ignoring lead in the feed
Solder, brass and coated scrap carry lead into the liquor. Fertiliser grade allows only 0.003% lead, so feed sorting and batch testing must be costed.
- Treating effluent as an afterthought
Iron and zinc build up in recycled mother liquor and must be bled off and treated. The sample sets aside ₹30.84 lakh for the scrubber and effluent plant.
- Planning flat monthly sales
Agricultural demand is seasonal. Without finished goods stock and a cash credit limit sized for the peak, the plant either idles or sells cheap.
How NPCS helps you set up a copper sulphate plant
- Feed and grade planningMatch your copper source to the grades and buyers you want to serve.
- Process and machinerySize reactors, crystallisers and effluent treatment, and compare supplier quotations.
- Bank-ready project reportProjections, DSCR, copper price sensitivity and working capital in your lender's format.
- Approvals and layoutAcid storage layout, pollution consent and Fertiliser Control Order steps for your state.
NPCS's client list records 116 assignments in the metal products sector. The NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports for entrepreneurs, banks and companies since 1994.
What's inside the copper sulphate sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS copper sulphate project reports
These are copper sulphate project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Copper Sulphate | 600 Nos. /annum | ₹2.38 crore | 24% | 60% | Get this report |
| Copper Sulphate from Metallic Scrap Copper | 10000 MT /Annum | ₹12.08 crore | 28% | 66% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Copper Sulphate project report: frequently asked questions
How much does it cost to set up a copper sulphate plant in India?
A small plant making 1–2 MT per day needs roughly ₹2–4 crore, and an 8–10 MT per day plant about ₹12–18 crore, including land, building and working capital margin. These are indicative figures. Our sample report models a 4.1 MT per day plant at ₹712 lakh. Of this, ₹123.50 lakh is working capital margin, because copper stock and debtors tie up cash.
What raw materials are used to make copper sulphate?
Copper and sulphuric acid. Small and mid-size Indian plants usually buy copper scrap, such as wire and cable scrap, and 98% sulphuric acid. In our sample report copper scrap is 96% of raw material cost and acid only 4%. Each tonne of crystals holds about 255 kg of copper, so the copper price decides most of your cost.
Is copper sulphate manufacturing profitable?
It can be, if copper buying and selling prices stay linked. In our illustrative sample, a 4.1 MT per day plant earns ₹125.46 lakh net profit in Year 3 on sales of ₹3,400.09 lakh. That is an 18% return on investment, with break-even at 52% of capacity. Margins are thin per tonne, so scrap pricing and lead control matter most.
Do I need a licence to sell copper sulphate as a fertiliser?
Yes. Copper sulphate is a listed micronutrient in Schedule I of the Fertiliser Control Order 1985. A manufacturer files a memorandum of intimation in Form A1 with the notified authority, and the acknowledgement in Form A2 works as the authorisation letter. The product must meet the order's specification, including at least 24% copper and no more than 0.003% lead.
What is the GST rate on copper sulphate?
It depends on the grade and the seller. GST on micronutrient fertilisers sold under the Fertiliser Control Order was cut from 12% to 5% in the 2025 rate changes. Technical and industrial grades are taxed under the general entry for heading 2833 sulphates. Confirm the rate for your exact HSN code and buyer with your chartered accountant before you price.
Which grade should a new copper sulphate plant make first?
Most new plants start with agricultural grade crystals of 24–25% copper, because fertiliser and agrochemical companies buy in volume. Technical grade for electroplating and mining needs tighter control of iron and insoluble matter. Feed and pharmaceutical grades need more testing and buyer approval, so they are usually added later once the plant runs steadily.
Is the copper sulphate project report PDF sample free, and can I use it for a loan?
The sample is free to view and download. It shows the format and depth of an NPCS report, but its figures are representative and not from a real project. Do not submit it to a bank. For a loan, NPCS prepares a report for your own capacity, location, copper source and lender.
Sources and references
- IS 261:1982 Specification for copper sulphate (standard extract)Bureau of Indian Standards, checked Oct 2026
- Product manual for IS 261:1982 (copper sulphate), circularBureau of Indian Standards, checked Oct 2026
- Fertiliser (Inorganic, Organic or Mixed) (Control) Order, 1985Agriculture Department, Government of Odisha, checked Oct 2026
- Reduction in GST on micronutrient fertilisers from 12% to 5%All India Radio News (Prasar Bharati), checked Oct 2026
