WhatsApp us
Request a Quote

Project reports in Metal Products

Cold Rolled Sheet Mill Project Report

Plant cost, mill and annealing machinery, HR coil inputs and five-year profitability for a cold rolling unit, with a free sample PDF you can open now.

Plant capacity
18 MT per day
Total project cost
₹840 lakh
Plant and machinery
₹386 lakh
Return on investment
15% (Year 3)
Break-even
48% of capacity
Payback period
About 4.5 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a cold rolled sheet mill project report?

A cold rolled sheet mill project report is a detailed project report (DPR) for a plant that pickles hot rolled steel coil and rolls it to thin gauge. It covers annealing, skin passing, machinery, raw materials, project cost, means of finance, five-year projections, DSCR and break-even, in the form a lender checks.

Steel re-rollers, tube and auto component makers adding a cold rolling line, and their banks use it to size the mill and test whether it can repay a term loan.

Also known as: cold rolling mill project report, CRCA sheet plant project report, cold rolled steel sheet DPR, cold rolled coil plant business plan.

Cold rolled sheet mill plant cost in India: sample economics

Our sample report models an 18 MT per day mill running 330 days a year, or 5,940 MT per year at full capacity. It starts at 60% utilisation and reaches 80% in Year 5, selling at ₹62,900 per MT before GST.

The margin is narrow. Raw materials take 70.8% of sales and net profit is 4.8% of sales in Year 3, so small changes in coil price or yield move the result a lot.

₹840 lakhTotal project cost
₹2,615 lakhSales in Year 3
₹125 lakhNet profit in Year 3
1.44Average DSCR
Cost of project (₹ lakh)
Land and site development55.57
Building and civil works215.09
Plant and machinery385.61
Other fixed assets41.03
Contingencies30.04
Preliminary and pre-operative18.18
Working capital margin94.43
Total839.95
Means of finance (₹ lakh)
Promoter's contribution (25%)209.99
Term loan from bank (75%)629.96
Cash credit limit (separate)283.30
Total project cost839.95

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. Lowest DSCR is 1.25, in Year 2. All figures are illustrative.

Cold rolled sheet mill manufacturing process

Cold rolling turns hot rolled coil, usually 1.6–4 mm thick with a scaled surface, into thinner sheet with a smooth finish and close thickness tolerance. The line below is the one costed in our sample report.

  1. Coil inspection

    Incoming HR coils are checked for grade, thickness, width and edge cracks, because defects in the hot band carry through to the finished sheet.

  2. Pickling

    The coil is uncoiled and run through heated hydrochloric acid tanks that dissolve the mill scale, then rinsed, dried and lightly oiled.

  3. Cold rolling

    A 4-Hi reversing mill squeezes the strip back and forth in several passes, with rolling emulsion cooling the rolls, until it reaches the target gauge.

  4. Cleaning

    Rolling oil left on the strip is removed so it does not burn into carbon stains inside the annealing furnace.

  5. Bell annealing

    Stacked coils are heated under a sealed bell in a hydrogen atmosphere, which softens the work-hardened steel without oxidising the surface.

  6. Skin pass rolling

    A light pass of about 1% reduction sets flatness and surface finish and removes the yield point effect that causes stretcher marks when pressing.

  7. Slitting, cutting and testing

    Coils are slit to width or cut to sheets, tested for thickness, hardness and surface, then oiled and packed against rust.

Which rolling and annealing route suits your mill?

Five design choices set most of the project cost and the grades you can sell. Decide them before you ask for machinery quotations.

Reversing or tandem millA single reversing stand rolls one coil in several passes and suits smaller, varied orders. A tandem mill with several stands rolls in one pass and needs far higher, steady volume to pay for itself.
4-Hi or cluster millA 4-Hi stand covers most mild steel CR and CRCA gauges. Very thin or hard material, such as stainless or high-carbon strip, needs a 6-Hi or 20-Hi cluster mill with small work rolls.
Own pickling or bought pickled coilAn own pickling line lowers coil cost but adds acid handling, fume scrubbing and hazardous waste. Buying hot rolled pickled and oiled (HRPO) coil cuts capital and approvals but narrows your margin.
Bell or continuous annealingHydrogen bell furnaces suit batch production and deep-drawing grades at modest volume. Continuous annealing lines are faster and more uniform but belong to large integrated mills.
Spent acid handlingSmall mills usually neutralise spent pickle liquor or send it to authorised recyclers. Acid regeneration recovers the acid but makes sense only at high throughput.

Our sample report assumes a 4-Hi reversing mill, own push-pull pickling and hydrogen bell annealing.

Raw materials for cold rolled sheets

HR coil decides both cost and quality. Lenders compare the coil price in your report with current market rates, and buyers reject sheet made from coil with the wrong chemistry for drawing.

Raw materialShare of costYear 3 (₹ lakh)
Hot rolled steel coil94%1,740.54
Hydrochloric acid for pickling2%37.04
Rolling oil and emulsion2%37.03
Hydrogen and nitrogen for annealing2%37.03
Total100%1,851.64

Year 3 cost at 70% utilisation in our illustrative sample. The sample holds 30 days of raw material stock.

Machinery for a cold rolling mill

The rolling stand is the heart of the plant and the biggest single cost. Ask for automatic gauge control (AGC), because thickness tolerance is the first thing buyers test.

MachineWhat it doesSample cost (₹ lakh)
Push-pull pickling line with acid tanksRemoves mill scale from HR coil69.41
4-Hi reversing cold rolling mill with AGCReduces strip to the target gauge146.53
Hydrogen bell annealing furnacesSoften rolled coils for forming53.98
Skin pass millSets flatness and surface finish30.85
Slitting and cut-to-length linesCut coils to width and sheet length30.85
Roll grinding machineRegrinds work and backup rolls19.28
EOT cranes and coil handlingMove coils between lines23.14
Acid fume scrubber and effluent treatmentCaptures acid fumes, treats rinse water11.57
Total plant and machinery385.61

Costs are the sample report's estimates for an 18 MT per day line. Get current quotations before you finalise.

Manpower and power for a cold rolled sheet mill

Power and fuel cost ₹157.03 lakh in Year 3 of our sample report, or 6% of sales. The mill motors, pickling tank heating and annealing furnaces are the main loads, so the sanctioned power load and tariff need to be in the report from the start.

The sample plant runs with 65 people. Mill operators and roll grinders are the hardest posts to fill and are usually hired from existing re-rolling clusters.

CategoryNumberMonthly wage (₹)Year 1 (₹ lakh)
Management, supervision and administration1030,50036.60
Skilled workers and operators2319,50053.82
Semi-skilled and unskilled workers3213,00049.92
Total65140.34

Wages are assumed to rise 5% a year in the sample. All figures are illustrative.

BIS licence and approvals for a cold rolled sheet mill

Cold reduced carbon steel sheet and strip falls under the Steel Quality Control Order. Plan the BIS licence before the first coil is sold.

Product standard and BIS markIS 513 (Part 1) for cold forming and drawing grades and IS 513 (Part 2) for high-tensile grades are listed under the Steel Quality Control Order; sheet without the BIS mark cannot be made or sold
Pollution board consentConsent to establish and consent to operate from the State Pollution Control Board, covering acid fumes, rinse water and the effluent treatment plant
Hazardous waste authorisationNeeded for spent pickle liquor, acid sludge and used rolling oil, with disposal through authorised recyclers
Factory licenceUnder the Factories Act or the state labour code, with approval of the plant layout and crane installations
Business registrationUdyam (MSME) registration and GST registration
Power and fireHigh-tension power connection for the connected load, and a fire NOC covering hydrogen storage for the annealing furnaces

Requirements differ by state. Confirm current rules with BIS, the state pollution board and the factories department.

Who buys cold rolled sheets and coils?

Cold rolled sheet goes into products where finish, flatness and formability matter: car and two-wheeler parts, appliance bodies, steel furniture and precision tubes. Galvanising and colour coating lines also buy full hard CR coil as their feedstock.

Large integrated mills supply most wide coil in standard sizes. A smaller mill wins on narrow widths, thinner or odd gauges, smaller lot sizes and faster delivery to fabricators near the plant.

  • Automobile and two-wheeler component makers
  • Consumer durable and appliance manufacturers
  • Steel furniture and electrical panel fabricators
  • Precision tube and drum makers
  • Steel service centres and stockists

Price the spread, not the sheet: buyers track HR coil prices closely, so a mill earns its margin from the gap between HR coil and CR sheet. Your report should show what happens to profit and DSCR when that gap narrows.

Mistakes that weaken a cold rolled sheet mill project report

  • Assuming every tonne of coil becomes sheet

    Scale removed in pickling, crop ends, edge trim and rejected coils all lose weight. Sales volume must be worked out after these losses.

  • Leaving out roll costs

    Work rolls wear and are reground often, and backup rolls are replaced over the years. Rolls and grinding belong in running costs, not only in capital cost.

  • Using one price for all grades

    Full hard, CRCA and deep-drawing grades sell at different prices. A report that applies the best price to all output overstates revenue.

  • Under-sizing acid and effluent handling

    A scrubber or ETP that is too small delays pollution consent and can stop the pickling line after start-up.

  • Thin working capital

    Coil is bought against advance or short credit, while buyers take 45 days or more. Without enough cash credit, the mill runs below capacity in its first year.

How NPCS helps you plan a cold rolled sheet mill

  • Product mix and mill sizeChoose widths, gauges and CR or CRCA grades to suit your buyers and budget.
  • Route and machineryCompare reversing mills, pickling options and annealing furnaces, with supplier quotations.
  • Bank-ready project reportProjections, DSCR, working capital and a coil-spread sensitivity in the format your lender wants.
  • Approvals and layoutPlant layout, power load, BIS licence and pollution approvals for your state.

NPCS's client list records 2 assignments for cold rolled sheet mills and 116 across metal products, and NPCS has prepared project reports and feasibility studies for steel units since 1994.

What's inside the cold rolled sheet mill sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

19 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS cold rolled sheet mill project reports

These are cold rolled sheet mill project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Cold Rolled Sheet MillCRC Sheet :150 MT/Day , Galvanised Plane Sheet:66 MT/Day , Galvanised Corrugated Sheet :66 MT/Day , M.S. Pipe & Tubes:100 MT/Day , M.S. Wire…₹38.33 crore26.8%50.7% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Cold Rolled Sheet Mill project report: frequently asked questions

How much does it cost to set up a cold rolled sheet mill in India?

A compact single-stand mill making narrow strip and sheet at 15–30 MT per day typically needs ₹8–20 crore, including land, building and working capital margin. Our sample report models an 18 MT per day unit at ₹839.95 lakh. Wide-coil mills with their own acid regeneration and continuous annealing run to hundreds of crores. These ranges are indicative; your report costs your own capacity and location.

What is the raw material for cold rolled sheets?

Hot rolled (HR) steel coil is the main input. In our sample report it is 94% of raw material cost, and raw materials as a whole are 70.8% of sales. Hydrochloric acid for pickling, rolling oil and emulsion, and hydrogen and nitrogen for annealing make up the rest. Coil grade and thickness must match the final CR grade you plan to sell.

What is the difference between CR and CRCA sheets?

CR means cold rolled: steel reduced in thickness at room temperature, which leaves it hard and springy. CRCA means cold rolled closed annealed: the same sheet after annealing in a sealed bell furnace, which softens it for bending and deep drawing. Most buyers of furniture, panels and pressed parts ask for CRCA, so a mill without annealing serves a narrower market.

Which machines are needed in a cold rolling mill?

The core line is a pickling line with acid tanks, a 4-Hi reversing cold rolling mill with automatic gauge control, hydrogen bell annealing furnaces and a skin pass mill. Finishing needs slitting and cut-to-length lines, a roll grinder, EOT cranes and an acid fume scrubber with effluent treatment. In our sample report the rolling mill is the largest single machinery item.

Is BIS certification mandatory for cold rolled steel sheets?

Yes, for products covered by the Steel Quality Control Order. The Ministry of Steel lists IS 513 (Part 1 and Part 2), cold reduced carbon steel sheet and strip, under the order. Listed products cannot be made or sold without the BIS mark. Check the current notification and your exact grade with BIS before you plan the product mix.

Is a cold rolled sheet mill profitable?

It can be, but margins are thin and depend on the gap between HR coil and CR sheet prices. Our illustrative sample earns a 15% return on investment in Year 3, with net profit at 4.8% of sales, break-even at 48% of capacity and average DSCR of 1.44. Coil buying, yield and power cost decide most of the result.

Is the sample report free and can I use it for a loan?

The sample is free to view and download. It shows the format and depth of an NPCS report. Its figures are illustrative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own mill size, product mix, location and lender.

Sources and references

  1. Lok Sabha Unstarred Question No. 3149: steel products under the Steel Quality Control Orders (answered 6 August 2018)Ministry of Steel, Government of India, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different metal products project?

These are a few of the projects we advise on. NPCS's published client list records 116 metal products assignments, so tell us what you are planning.

Tell us your project

Recent metal products assignments

  • Long Island Trading Co. Pvt. Ltd
    Project Report on Aluminium Can Manufacturing Plant SetupIndore, 2026
  • Allotrope Engineers
    Bankable Project Report on Gas Atomized Aluminium PowderHyderabad, 2026
  • P M Infrastructure Private Limited
    Comprehensive Market Research Report on TMT BarsBangalore, 2026
  • Arham Recycling Private Limited
    Pre-Feasibility Report on Copper Wire RecyclingFaridabad, 2026
  • Bihar Foundry & Castings Limited
    Industrial Project Report on Electrolytic Manganese MetalRanchi, 2026
  • Rgcon Itm
    Comprehensive Project Report on Copper CathodeVisakhapatnam, 2026
  • Krishnay Recycling Pvt Ltd
    Pre-Feasibility Report on Project Planning and Feasibility Report on Copper Cathode and CoSouth Africa, 2026
  • Goodluck India Ltd
    Techno-Economic Project Report on Inner Grooved Copper TubesSikandrabad, 2025

Get a cold rolled sheet mill project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Cold Rolled Sheet Mill Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free cold rolled sheet mill sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Cold Rolled Sheet Mill sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp