What is a aluminium secondary billet casting project report?
An aluminium secondary billet casting project report is a detailed project report (DPR) for a plant that remelts aluminium scrap, corrects the alloy and casts round extrusion billets. It covers scrap sourcing, melting, direct chill casting, homogenising, machinery, approvals, project cost, five-year projections, DSCR and break-even for the promoter and the bank.
Remelters, scrap traders moving into processing and extrusion companies planning their own casthouse use it to size the plant and raise a term loan.
Also known as: secondary aluminium billet casting, aluminum secondary billet casting.
Aluminium secondary billet casting plant cost and economics
The sample report models a 3.9 metric tonnes per day casthouse, or 1,287 MT per year at full capacity, running 330 days a year. It starts at 60% of capacity and reaches 80% in Year 5, selling billets at ₹2,65,000 per MT before GST.
| Land and site development | 61.52 |
|---|---|
| Building and civil works | 175.66 |
| Plant and machinery | 304.27 |
| Other fixed assets | 44.27 |
| Contingencies | 24.00 |
| Preliminary and pre-operative | 15.24 |
| Working capital margin | 85.53 |
| Total | 710.49 |
| Promoter's contribution (25%) | 177.62 |
|---|---|
| Term loan from bank (75%) | 532.87 |
| Cash credit limit (separate) | 256.58 |
| Total project cost | 710.49 |
Where the money sits: metal is expensive, so working capital is large next to the machinery. In the sample, the Year 1 working capital need is ₹342.11 lakh, more than the ₹304.27 lakh spent on plant and machinery, and trade receivables are its largest part.
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
Aluminium secondary billet casting manufacturing process
A secondary casthouse turns scrap into 6063 or 6061 extrusion billets in eight stages. Chemistry is fixed in the furnace, and billet quality is decided at the caster and the homogenising furnace.
- Scrap sorting and preparation
Scrap is graded by alloy and baled after loose iron, plastic, rubber gaskets and wet material are removed. Moisture in the charge is a safety hazard in molten metal.
- Melting
Bales and primary ingot are charged into a reverberatory furnace and melted at about 720–760 degrees Celsius, with dross skimmed off the surface.
- Alloying and spectro check
Magnesium and silicon are added to bring the melt into specification, confirmed by a spectrometer sample before the metal is transferred.
- Fluxing and degassing
In the holding furnace the melt is fluxed to separate oxides and purged with argon or nitrogen to take out dissolved hydrogen, which otherwise causes porosity.
- Filtration and grain refining
Metal runs through a ceramic foam filter, and titanium-boron grain refiner rod is fed into the launder for a fine, even grain.
- Direct chill casting
The caster lowers a platen as metal fills water-cooled hot-top moulds, drawing out several long round logs in one drop.
- Homogenising
Logs are soaked at about 560–580 degrees Celsius and then cooled at a controlled rate, so the billet extrudes faster with a better surface.
- Sawing, inspection and dispatch
Logs are cut to the billet length each extruder asks for, checked for surface and end defects, bundled and labelled by cast number.
Key plant choices for a secondary billet casthouse
The choices below change the machinery cost, the scrap you can use and the price your billets fetch. A project report should state each one clearly.
| Melting furnace | Reverberatory furnaces suit clean, heavy extrusion scrap and are the usual choice. Light or coated scrap melts with high losses unless a side-well or rotary furnace is used. |
|---|---|
| Burner and fuel | Regenerative or recuperative burners on furnace oil, LPG or natural gas cut fuel per tonne but cost more upfront. Fuel choice also affects the pollution consent. |
| Casting method | Vertical direct chill casting with hot-top moulds gives the surface and structure extruders expect. Simple gravity log moulds are cheaper but give poorer billets. |
| Homogenising | An in-house homogenising furnace adds cost but lets you sell a finished billet. Without it, you sell to buyers who homogenise themselves, usually at a lower price. |
| Billet sizes | Mould sets decide the diameters you can offer. Small extruders often run 5 to 7 inch billets, so the mould plan should follow your target buyers' presses. |
Raw materials: scrap, primary ingot and alloying additions
Raw materials take 67.6% of sales in the sample, so scrap buying decides profit more than anything else. Primary ingot is added to dilute iron and other elements that build up when scrap is remelted again and again.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Aluminium extrusion and profile scrap | 66% | 1,065.58 |
| Primary aluminium ingot for sweetening | 23% | 371.34 |
| Magnesium and silicon alloying additions | 6% | 96.87 |
| Fluxes, degassing tablets and grain refiner rod | 5% | 80.72 |
| Total | 100% | 1,614.51 |
Extrusion offcuts and old window sections of the same 6000-series family are the cleanest feed. Painted, anodised or mixed scrap lowers metal recovery and needs a higher share of primary ingot.
Machinery for an aluminium billet casting plant
The melting furnace is the costliest item in the sample, closely followed by the direct chill caster. Together they are close to half of the machinery bill.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Reverberatory melting furnace with regenerative burners | Melts scrap and ingot | 73.03 |
| Tilting holding furnace | Holds, alloys and treats the melt | 36.51 |
| Inline degassing and ceramic foam filtration unit | Removes hydrogen and oxide inclusions | 27.38 |
| Hydraulic direct chill billet casting machine with hot-top moulds | Casts long round logs | 66.94 |
| Billet homogenising furnace and cooling chamber | Evens out the cast structure | 48.68 |
| Billet saw and stacking line | Cuts logs to billet length | 18.26 |
| Fume extraction and bag filter system | Captures furnace fumes and dust | 18.26 |
| Optical emission spectrometer | Checks melt chemistry before casting | 15.21 |
| Total plant and machinery | 304.27 | |
Costs are the sample report's estimates for a 3.9 MT per day line. Get current quotations before you finalise.
Fuel, power and manpower for a billet casthouse
Furnace fuel and power cost ₹151.77 lakh in Year 3 of the sample, about 6.4% of sales. The plant runs round the clock once the furnace is hot, because reheating a cold furnace wastes fuel, so manpower is planned in shifts.
| Category | People | Year 1 cost (₹ lakh) |
|---|---|---|
| Management, supervision and administration | 10 | 36.60 |
| Skilled workers and operators | 22 | 51.48 |
| Semi-skilled and unskilled workers | 32 | 49.92 |
| Total | 64 | 138.00 |
Skilled roles include furnace operators, casters and a spectrometer technician. Cooling water for the caster is recirculated through a cooling tower.
Licences and approvals for an aluminium scrap remelting plant
| Business registration | Udyam (MSME) registration and GST registration |
|---|---|
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board. Aluminium extraction from scrap using an oil fired furnace (dry process only) is in the Orange category under CPCB criteria |
| Hazardous waste | Authorisation from the State Pollution Control Board under the Hazardous and Other Wastes Rules, 2016, for storing dross and sending it only to authorised users |
| BIS quality control | The Aluminium and Aluminium Alloys Quality Control Order, 2023 covers EC grade ingots, billets and wire bars (IS 4026) and several remelting ingot standards. Check with BIS whether the alloy billet grades you plan fall under a current order |
| Factory and fire safety | Factory licence under the Factories Act and a fire NOC; molten metal and fuel storage make these essential |
| Power | Industrial power connection for the caster, homogenising furnace, fume system and cooling tower |
Rules differ by state and change over time. Confirm current requirements with your state board and BIS before you apply.
Who buys secondary aluminium billets?
Almost every secondary billet goes to an extrusion press. Small and mid-size extruders buy from remelters because secondary billets cost less than primary billets from the smelters, and because a nearby casthouse can supply small lots at short notice.
- Aluminium extrusion units making general sections
- Window, door and facade system makers
- Solar mounting structure extruders
- Automobile, bus body and rail component extruders
- Metal traders and billet stockists
The price gap is your margin: NALCO's ex-works list of 23 January 2026 priced its primary billets at about ₹3.3 lakh per MT. The sample prices secondary billets at ₹2,65,000 per MT, so a remelter must buy scrap well below that and hold chemistry steady to keep buyers.
Mistakes that weaken an aluminium billet casting project report
- Assuming every kilo of scrap becomes billet
Melt loss, dross and saw cuts all take metal. A report that ignores them overstates output and profit.
- Pricing billets at primary rates
Extruders pay less for secondary billets. Using the smelter price list for sales makes the DSCR look far better than it is.
- No plan for iron build-up
Each remelt picks up iron. Without a budget for primary ingot dilution, the billets drift out of specification.
- Leaving out homogenising or dross costs
Homogenising fuel, mould wear and paying for authorised dross disposal are real running costs, not one-time items.
- Too little working capital
Scrap is often bought for cash while extruders expect credit. Under-sizing the cash credit limit stalls the plant in Year 1.
How NPCS helps you set up an aluminium billet casting plant
- Capacity and billet mixSize the furnace, caster and mould set to the diameters and alloys your buyers use.
- Scrap and yield planningWork out scrap grades, primary ingot share and realistic metal recovery for your sources.
- Bank-ready project reportProjections, DSCR and working capital in the format your lender wants.
- Approvals and layoutCasthouse layout, fume and dross handling and the approvals list for your state.
NPCS's published client list includes 116 assignments for metal product units, and the NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports since 1994.
What's inside the aluminium secondary billet casting sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS aluminium secondary billet casting project reports
These are aluminium secondary billet casting project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Aluminium Secondary Billet Casting | 21600 MT/Year | ₹20.2 crore | 43% | 63% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Aluminium Secondary Billet Casting project report: frequently asked questions
What is the cost of an aluminium secondary billet casting plant in India?
Our sample report costs a 3.9 MT per day billet casthouse at ₹710 lakh, including ₹304 lakh of plant and machinery, land, building and the working capital margin. A plant that adds a second caster or a larger furnace costs more. Your own figure depends on capacity, whether you homogenise in-house, the furnace make and the price of land in your area.
What raw material is used to make secondary aluminium billets?
Clean extrusion and profile scrap of the same alloy family is the main input. In our sample it is 66% of raw material cost. Primary aluminium ingot adds 23% to dilute impurities, magnesium and silicon 6%, and fluxes, degassing tablets and grain refiner 5%. Mixed or painted scrap needs more sorting and more primary metal.
Which machines are needed for aluminium billet casting?
The core line is a melting furnace, a tilting holding furnace, an inline degassing and filtration unit and a direct chill casting machine with hot-top moulds. You also need a homogenising furnace, a billet saw, a fume extraction system and an optical emission spectrometer. In our sample the melting furnace is the costliest item at ₹73.03 lakh.
Is aluminium billet casting from scrap profitable?
In our illustrative sample, a 3.9 MT per day plant earns ₹138 lakh net profit on ₹2,387 lakh of sales in Year 3. That is a 19% return on investment, with break-even at 45% of capacity. The margin is thin per tonne, so profit depends mostly on the gap between your scrap buying price and the billet selling price.
Why are aluminium billets homogenised before extrusion?
Cast billets have uneven grain structure and coarse particles at the grain boundaries. Soaking them at a high temperature and cooling at a controlled rate evens this out. The billet then extrudes at higher press speed with a better surface and fewer die problems. Extruders often pay more for homogenised billets, and some refuse billets that are not homogenised.
Which pollution category applies to an aluminium scrap melting unit?
Under the CPCB categorisation followed by state boards, aluminium extraction from scrap in an oil fired furnace (dry process only) is listed in the Orange category. You need consent to establish and consent to operate from the State Pollution Control Board, and dross must be handled under the hazardous waste rules. Confirm the category with your state board.
Is the sample report free and can I use it for a loan?
Yes, the sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and scrap supply.
Sources and references
- The Aluminium and Aluminium Alloys (Quality Control) Order, 2023 (S.O. 3846(E))Ministry of Mines, Gazette of India, checked Oct 2026
- Categorisation of industrial sectors under Orange as per CPCB criteriaState Pollution Control Board, Odisha, checked Oct 2026
- SOP for utilisation of aluminium dross residues under Rule 9 of the Hazardous and Other Wastes Rules, 2016Central Pollution Control Board, checked Oct 2026
- Aluminium billet price list, ex-works, 23 January 2026National Aluminium Company Limited (NALCO), checked Oct 2026

