WhatsApp us
Request a Quote

Project reports in Metal Products

Aluminium Easy Open End (EOE) Plant Project Report

Plant cost, presses, coil and compound needs and five-year profitability for an aluminium EOE line, with a free sample project report PDF you can open now.

Also known as: EOE, easy open end lid, ring pull can end, aluminum easy open end

Plant capacity
4,50,000 ends per day
Total project cost
₹804 lakh
Plant and machinery
₹392 lakh
Return on investment
17% (Year 3)
Break-even
46% of capacity
Payback period
About 4.1 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a aluminium easy open end project report?

An aluminium easy open end (EOE) project report is a detailed project report for a plant that turns lacquered aluminium coil into ring-pull can lids. It sets out the presses, raw materials, buyers, project cost, means of finance, five-year projections, DSCR and break-even that a bank or investor reviews before funding the line.

Promoters use it to size the line and raise a term loan; lenders and can buyers use it to judge whether the unit can supply reliably and repay.

Also known as: EOE, easy open end lid, ring pull can end, aluminum easy open end.

Aluminium easy open end plant cost and economics

The sample report models a line making 4,50,000 ends per day for 330 days a year. It starts at 60% of capacity and reaches 80% in Year 5, with ends sold at ₹2.05 each, ex-factory and before GST.

₹804 lakhTotal project cost
₹2,131 lakhSales in Year 3
₹139 lakhNet profit in Year 3
1.58Average DSCR
Cost of project (₹ lakh)
Land and site development41.85
Building and civil works204.87
Plant and machinery391.50
Other fixed assets42.71
Contingencies29.82
Preliminary and pre-operative17.77
Working capital margin75.88
Total804.40
Means of finance (₹ lakh)
Promoter's contribution (25%)201.10
Term loan from bank (75%)603.30
Cash credit limit (separate)227.66
Total project cost804.40

The tightest year for repayment is Year 2, when the DSCR (debt service coverage ratio, cash available for each rupee of loan instalment) dips to 1.38 as principal repayment starts in full. Cash break-even in Year 3 is 37.4% of capacity.

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.

Aluminium easy open end manufacturing process

An EOE is made in two press stages: the shell press forms a plain lid, and the conversion press turns it into an end that opens by hand. Between them, the edge is curled and lined with sealing compound.

  1. Coil feeding

    Lacquered end stock is uncoiled, given a thin film of wax and fed by a servo feeder so every stroke gets the same length of metal.

  2. Shell forming

    The shell press blanks several shells per stroke and draws the panel and countersink that let the end resist internal pressure.

  3. Curling

    The cut edge is rolled into a curl that will later be double seamed onto the can body by the filler.

  4. Compound lining

    A ring of sealing compound is sprayed into the curl and dried; too little gives leaking seams, too much wastes an expensive input.

  5. Conversion

    In several stations the press forms the rivet, cuts the score line, and stakes on a pull tab made from a second, narrower coil.

  6. Testing

    Ends are pulled from each lane to check score residual (the metal left under the score), opening force, buckle pressure and compound weight.

  7. Bagging

    Ends are counted into paper sleeves or bags, palletised and wrapped so the curls stay clean and dry until seaming.

Which type of easy open end and line should you plan for?

The end you choose fixes the press, the tooling and the buyers you can serve. Decide this first, because it changes the project cost more than any other choice.

Full-aperture food endsThe whole panel tears out. Used on nuts, milk powder, snacks and ready meals, in sizes such as 63 mm, 73 mm and 99 mm. Each size needs its own tooling.
Beverage stay-on-tab endsSmall opening, tab stays on the end. Made in very large volumes on 4 to 6 lane conversion presses, mostly by or for integrated can makers.
Aluminium or tinplateAluminium is lighter and rust free; tinplate is used for many retorted food cans. A plant usually tools for one metal at the start.
Number of lanesThe sample's output works out to roughly 340 ends a minute over a 22-hour day, which a single-lane or two-lane food end line can reach.
Lining compoundWater-based compound keeps solvent emissions low and makes pollution consent simpler than a solvent-based system.

Sizes and line choices are indicative. Confirm end diameters with the fillers you plan to supply.

Raw materials for aluminium easy open ends

Raw materials take 63.5% of sales in the sample, and coated end stock is almost four-fifths of that. The coil arrives lacquered on both sides, so coating quality is set by the supplier, not by you.

Raw materialShare of costYear 3 (₹ lakh)
Lacquered aluminium end stock coil79%1,068.70
Aluminium tab stock coil11%148.81
Water-based sealing compound7%94.69
Press lubricant and wax3%40.58
Total100%1,352.78

Aluminium sheet and strip to IS 737 came under a BIS quality control order from 26 September 2024. Check that domestic or imported coil carries a valid BIS licence where the order applies.

Machinery for an aluminium EOE plant

The two presses and their dies are about two-thirds of the machinery budget. The conversion press is the single largest item, because its tooling cuts the score and stakes the tab in one sequence.

MachineWhat it doesSample cost (₹ lakh)
Coil cradle and servo feed lineUncoils and feeds end stock27.41
High-speed shell press with multi-out dieForms plain shells101.79
Curler and compound lining machine with drying ovenCurls the edge and lines it46.98
Conversion press with tab dieScores, rivets and fits the tab117.45
Spare dies and tooling setKeeps presses running during regrinds39.15
Automatic end counting and bagging machineCounts and sleeves ends23.49
Quality control labScore residual and pressure tests15.66
Air compressor and electrical panelsAir for transfer and ejection19.57
Total plant and machinery391.50

Costs are the sample report's estimates. Get current quotations, including tooling and installation, before you finalise.

Manpower and power for an EOE line

A three-shift line needs press operators, a toolroom that can regrind dies quickly, and QC staff on every shift. Power and fuel cost ₹147.59 lakh in Year 3 of the sample, or 6.9% of sales, mostly for presses, the drying oven and compressed air.

CategoryNumberYear 1 cost (₹ lakh)
Management, supervision and administration1036.60
Skilled workers and operators2353.82
Semi-skilled and unskilled workers3453.04
Total67143.46

Licences and standards for an easy open end unit

The end maker is not a food business, but every buyer is. Most approvals your customers ask for come from food packaging rules.

Business registrationUdyam (MSME) registration and GST registration
Pollution board consentConsent to establish and operate from the State Pollution Control Board; the category depends on the state list and on solvent use in lining
Food-contact packagingUnder the FSSAI Packaging Regulations, 2018, food businesses must hold a certificate of conformity from an NABL-accredited lab for packaging that touches food, so buyers ask the end supplier for test reports
Can standardsFSSAI Schedule II lists IS 9396 (round open top sanitary cans) and IS 737 (aluminium sheet and strip) for metal packaging
BIS quality control ordersMetal cans are covered by BIS orders, for example IS 18427:2024 for three-piece open top cans (March 2026 order); ends are not named separately, so confirm scope with BIS
Factory and fireFactory licence where the workforce threshold applies, and a fire NOC for the oven and compound store

Checked October 2026. Rules change; confirm with the state departments and BIS before you apply.

Who buys aluminium easy open ends?

Ends are sold to two kinds of buyer: can makers who supply bodies and ends together, and food or drink companies that buy empty cans and seam on ends themselves. Canned beverages, milk powder, nuts and ready-to-eat foods drive most of the volume.

  • Metal can makers
  • Beverage and juice fillers
  • Milk powder and infant food packers
  • Nut, snack and dry food packers
  • Ready-to-eat and pet food canners

Buyers rarely switch on price alone. A filler runs seaming trials, checks leakage and opening force, and asks for test certificates before placing a regular order.

Where a new unit wins: packers who import ends must order well ahead and hold large stocks. A local supplier with steady opening force and short delivery times frees up their working capital.

Mistakes that weaken an EOE project report

  • Fixed selling price with floating coil cost

    End stock follows aluminium prices. Contracts usually pass metal changes through; a report that ignores this overstates or understates margins.

  • No budget for tooling wear

    Scoring and tab dies need regrinding and replacement. Leaving out spare tooling stops the line while dies are away.

  • Full sales from the first month

    Fillers approve ends only after trials. The sample starts at 60% of capacity for this reason, and so should yours.

  • Coil stock days copied from a domestic supplier

    The sample holds 30 days of raw material. Imported lacquered coil has longer lead times, which raises working capital.

  • Treating the lab as optional

    Score residual drifts as dies wear. Without regular checks, ends either open too hard or leak, and a single rejected lot can lose a customer.

How NPCS prepares your aluminium easy open end (EOE) project report

  • End sizes and capacityPick food or beverage ends, diameters and lanes to suit the buyers near you.
  • Presses, tooling and coilCompare press options, tooling sets and coil sources with current quotations.
  • Bank-ready projectionsCost of project, working capital, DSCR and break-even in the format your lender expects.
  • Approvals and layoutPlant layout, power load, pollution consent and the BIS and FSSAI points your buyers will raise.

NPCS's client list includes 116 assignments in metal products, among them a 2026 project report for an aluminium can manufacturing plant.

What's inside the aluminium easy open end sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

19 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS aluminium easy open end project reports

These are aluminium easy open end project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Aluminium Easy Open End (EOE)Aluminium Easy Open End, 63 mm Size:2,016,000 Units Per Day Aluminium Scrap:200Kg Per Day₹84.83 crore29%35% Get this report
Aluminium Cans & Easy Open End (EOE) for BeveragesAluminium Cans & Easy Open End (EOE):40 Lakh Pcs. Per Day₹721 crore26%27% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Aluminium Easy Open End project report: frequently asked questions

What is the aluminium easy open end manufacturing plant cost in India?

Our sample report puts a 4,50,000 ends per day plant at ₹804 lakh, including land, building, ₹392 lakh of plant and machinery and working capital margin. As an indicative guide, a single-lane food end line costs less and a high-speed beverage end module with imported presses costs several times more. Your report prices the line for your end sizes and location.

What raw materials are used to make aluminium easy open ends?

The main input is lacquered aluminium end stock in coil, which is 79% of raw material cost in our sample. Narrow aluminium tab stock for the pull ring, a water-based sealing compound for the curl, and press lubricant and wax make up the rest. Coil is priced off the aluminium market, so its cost moves often.

Which machines are needed for an EOE plant?

The core line is a coil cradle with servo feed, a shell press with a multi-out die, and a curler with compound lining and a drying oven. A conversion press with a tab die finishes the end. You also need spare tooling, an end counting and bagging machine, a compressor and a lab with a score residual gauge and pressure tester.

Is an aluminium easy open end business profitable?

In our illustrative sample the unit earns a 17% return on investment in Year 3, breaks even at 46% of capacity and pays back in about 4.1 years. Margins are thin per end, so profit depends on coil buying, tooling life, scrap rates and winning approval from can makers and fillers early.

What is the difference between aluminium and tinplate easy open ends?

Aluminium ends are lighter, do not rust and are the standard for beverage cans and many dry food and powder cans. Tinplate ends are steel based and are widely used on food cans that go through retort sterilisation. Both are made on similar shell and conversion presses, but tooling and press settings differ for each metal.

Do easy open ends need BIS certification or FSSAI approval?

The end maker does not need an FSSAI licence, but food packers must hold an NABL test certificate for food-contact packaging, so they will ask you for one. BIS quality control orders name metal cans; the orders checked in October 2026 do not list ends separately, so confirm with BIS and your buyer before you start supplying.

Is the sample report free and can I use it for a loan?

Yes, the sample is free to view and download, but it is not meant for a loan application. It shows the format and depth of an NPCS report using representative figures, not a real project. Banks need figures for your own line, so NPCS prepares a report for your end sizes, capacity, location and lender.

Sources and references

  1. Food Safety and Standards (Packaging) Regulations, 2018: compendium, version IIIFood Safety and Standards Authority of India, checked Oct 2026
  2. Cookware, Utensils and Cans for Foods and Beverages (Quality Control) Order, 2026Ministry of Steel, published by the Bureau of Indian Standards, checked Oct 2026
  3. Circular on the Aluminium and Aluminium Alloy Products (Quality Control) Amendment Order, 2024Bureau of Indian Standards, checked Oct 2026

Recommended reading on aluminium easy open end

Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different metal products project?

These are a few of the projects we advise on. NPCS's published client list records 116 metal products assignments, so tell us what you are planning.

Tell us your project

Recent metal products assignments

  • Long Island Trading Co. Pvt. Ltd
    Project Report on Aluminium Can Manufacturing Plant SetupIndore, 2026
  • Allotrope Engineers
    Bankable Project Report on Gas Atomized Aluminium PowderHyderabad, 2026
  • P M Infrastructure Private Limited
    Comprehensive Market Research Report on TMT BarsBangalore, 2026
  • Arham Recycling Private Limited
    Pre-Feasibility Report on Copper Wire RecyclingFaridabad, 2026
  • Bihar Foundry & Castings Limited
    Industrial Project Report on Electrolytic Manganese MetalRanchi, 2026
  • Rgcon Itm
    Comprehensive Project Report on Copper CathodeVisakhapatnam, 2026
  • Krishnay Recycling Pvt Ltd
    Pre-Feasibility Report on Project Planning and Feasibility Report on Copper Cathode and CoSouth Africa, 2026
  • Goodluck India Ltd
    Techno-Economic Project Report on Inner Grooved Copper TubesSikandrabad, 2025

Get a aluminium easy open end project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Aluminium Easy Open End Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free aluminium easy open end sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Aluminium Easy Open End sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp