What is a aluminium cladding construction project report?
An aluminium cladding construction project report is a detailed project report (DPR) for a plant that bonds two pre-coated aluminium skins to a plastic or mineral core to make aluminium composite panels (ACP) for building facades. It sets out the process, ACP line, coil and core materials, market, project cost, five-year projections, DSCR and break-even.
Promoters use it to size the line and raise a term loan; banks and investors use it to judge whether the plant can carry its debt.
Also known as: ACP sheet manufacturing project report, aluminium composite panel plant project report, aluminium cladding panel business plan, DPR for ACP manufacturing.
Aluminium cladding construction manufacturing plant cost in India
The sample report models one continuous ACP line making 2,100 square metres of panel a day, or 6,93,000 square metres a year at full capacity. It runs 330 days a year, starts at 60% utilisation and reaches 80% in Year 5, selling at ₹888 per square metre ex-factory.
| Land and site development | 119.46 |
|---|---|
| Building and civil works | 326.47 |
| Plant and machinery | 728.89 |
| Other fixed assets | 63.92 |
| Contingencies | 52.77 |
| Preliminary and pre-operative | 32.29 |
| Working capital margin | 153.82 |
| Total | 1,477.62 |
| Promoter's contribution (25%) | 369.40 |
|---|---|
| Term loan from bank (75%) | 1,108.22 |
| Cash credit limit (separate) | 461.46 |
| Total project cost | 1,477.62 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. Lowest DSCR in any year is 1.42. All figures are illustrative.
Aluminium cladding construction manufacturing process
An ACP line is one continuous machine: coils go in at one end and cut, filmed panels come out at the other. Most Indian plants buy coils already coated and do not run their own paint line.
- Coil preparation
Front and back skin coils, usually 0.2–0.5 mm thick, are loaded on decoilers, and the bonding side is cleaned so the adhesive grips evenly.
- Core extrusion
LDPE granules, or a mineral-filled FR compound, are melted in an extruder and pressed through a flat die into a core of the set thickness.
- Hot lamination
The two skins, the adhesive film and the hot core meet between heated rollers, which fuse them under pressure into one panel.
- Cooling and filming
The panel passes through cooling rolls to stay flat, and a peel-off film is laid on the coated face to protect it on site.
- Trimming and cutting
Edges are trimmed to width, commonly 1,220 mm, and a flying saw cuts the running panel to lengths such as 2,440 mm and 3,050 mm.
- Testing and packing
Samples from each run are tested for peel strength, coating thickness and flatness, and the sheets are stacked on pallets with corner guards.
PE core, FR core or A2: which panels should the plant make?
The core and the coating decide which buyers you can serve and what you can charge. Many plants run PE and FR cores on the same line, which needs a compound mixer and filler dosing system.
| PE core | Low-density polyethylene core. Cheapest grade, used for signage, shopfronts and interiors. Not accepted for facades of taller buildings by most architects and fire officers. |
|---|---|
| FR core | Polyethylene heavily filled with mineral fire retardants. Specified for commercial and high-rise facades; sells at a premium and needs fire test reports for each grade. |
| A2 core | Mostly mineral, close to non-combustible. Used where fire rules are strictest. Needs tighter process control and is usually added after the line runs well on FR. |
| PVDF coating | Fluorocarbon paint on the coil for exterior facades, chosen for colour and gloss retention in sun and rain. |
| Polyester coating | Lower-cost paint for interiors, signage and short-life uses. Suits the price-led PE market. |
| Panel thickness | 3 mm, 4 mm and 6 mm are the common sizes. Changing thickness changes core output per hour, so it affects line capacity. |
Raw materials for aluminium composite panels
Pre-coated aluminium coil is the largest cost by far. Coil prices track aluminium prices, and imported or speciality colours can take weeks to arrive, so the sample holds 30 days of raw material stock.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Pre-coated aluminium coils for front and back skins | 66% | 1,856.13 |
| LDPE or mineral-filled FR core compound | 22% | 618.71 |
| Polymer adhesive film | 8% | 224.99 |
| Protective peel-off film | 4% | 112.49 |
| Total | 100% | 2,812.32 |
In the sample, raw materials come to 65.3% of sales in Year 3.
Machinery for an ACP cladding panel plant
The composite line with its core extruder is the largest single item, at 40% of the machinery cost in the sample. Line speed and maximum width set the plant's capacity.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Continuous ACP composite line with core extruder | Extrudes the core and carries the panel through the line | 291.56 |
| Coil decoilers and skin cleaning section | Feeds and cleans the two aluminium skins | 72.89 |
| Hot laminating roller system | Bonds skins, adhesive and core under heat | 109.33 |
| Cooling section with protective film applicator | Sets the panel flat and applies the face film | 72.89 |
| Core compound mixer and FR filler dosing system | Blends polymer and mineral filler for FR grades | 58.31 |
| Edge trimmer and panel cutting saw | Trims width and cuts panels to length | 36.45 |
| Quality testing lab for peel and coating tests | Checks each run against IS 17682 | 36.44 |
| Chiller, air compressor and electrical panels | Cooling water, air and power control for the line | 51.02 |
| Total plant and machinery | 728.89 | |
Costs are the sample report's estimates. Get current quotations for the line width, speed and core types you plan to run.
Manpower and power for the plant
An ACP line needs trained extruder and lamination operators on every shift. The sample plant employs 93 people, and power and fuel cost ₹375.07 lakh in Year 3, or 8.7% of sales, mostly for the extruder heaters and heated rollers.
| Category | Number | Annual cost (₹ lakh) |
|---|---|---|
| Management, supervision and administration | 14 | 51.24 |
| Skilled workers and operators | 33 | 77.22 |
| Semi-skilled and unskilled workers | 46 | 71.76 |
| Total (Year 1) | 93 | 200.22 |
BIS licence and approvals for ACP manufacturing
Plan the BIS licence before the line is installed. Panels cannot be sold in India without the Standard Mark, so the testing lab and the first licence samples sit on the project's critical path.
| BIS licence | IS 17682: 2021 (aluminium composite panel), mandatory under the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026, S.O. 1319(E), with immediate effect for all units as of October 2026 |
|---|---|
| Product tests | IS 17682 covers coating and bond tests; Amendment No. 1 (September 2024) added a peel strength test |
| Business registration | Udyam (MSME) registration and GST registration |
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board; the category for polymer extrusion and lamination is set by each state's list |
| Factory and fire | Factory licence where worker thresholds apply, and a fire NOC for stored polymer and film |
| Power | Industrial HT or LT connection sanctioned for the line's connected load |
Rules change. Confirm the current QCO schedule on the BIS website and state requirements before you apply.
Who buys aluminium cladding panels?
Demand comes from commercial buildings, showrooms, hospitals, metro stations and airports, and from the signage trade. Facade work leans towards FR core and PVDF panels; signage and interiors buy PE core with polyester paint on price.
- Facade and glazing contractors
- ACP distributors and building material dealers
- Signage and shopfront fabricators
- Interior contractors
- Builders and developers
- Infrastructure project contractors
Where a new plant wins: contractors need the exact shade quickly and in matched batches. A regional plant that stocks popular colours and ships in days can take orders that national brands fill from distant depots.
Mistakes that weaken an ACP project report
- Pricing all output at FR or PVDF rates
If most sales will be PE signage sheet, a blended price near the premium grade overstates revenue and DSCR.
- Leaving out the BIS lead time
No sales can start before the licence, so the first months of output, interest and wages must be funded in the plan.
- No allowance for edge trim and start-up scrap
Trimmed edges, colour changes and line start-ups waste coil; saleable square metres must be lower than coil fed.
- Ignoring coil price swings
Coil is 66% of material cost in the sample. The report should test a rise in coil price against selling price.
- Under-sizing working capital for dealer credit
Trade receivables are the biggest current asset in the sample, at 45 days of sales; a small cash credit limit stalls the plant in Year 1.
How NPCS helps you set up an aluminium cladding panel plant
- Line size and product mixChoose line width, thickness range and the PE, FR and A2 mix to match your buyers.
- Machinery and coil sourcingCompare ACP line suppliers and coil and core compound sources, with quotations.
- Bank-ready project reportProjections, DSCR, CMA data and working capital in the format your lender asks for.
- BIS and plant layoutThe IS 17682 testing lab, licence steps, plant layout and the approvals list for your state.
NPCS, led by founder Ajay Kumar Gupta, has prepared project reports for metal product units since 1994. Its client list shows 116 assignments in this sector.
What's inside the aluminium cladding construction sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
18 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS aluminium cladding construction project reports
These are aluminium cladding construction project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Aluminium Cladding (Construction) | 40 MT/Day | ₹105 crore | 38% | 40% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Aluminium Cladding Construction project report: frequently asked questions
What is the cost of an aluminium cladding (ACP) manufacturing plant in India?
A single continuous ACP line that buys pre-coated coils needs an indicative ₹10–15 crore, including land, building and working capital margin. Our sample report models a 2,100 square metres per day plant at ₹1,478 lakh, with ₹729 lakh in plant and machinery. A plant that also coats its own coils needs a much larger budget. Your report works out the cost for your line and location.
What raw materials are used to make aluminium composite panels?
Pre-coated aluminium coils for the front and back skins, a core compound of LDPE or mineral-filled FR material, a polymer adhesive film and a peel-off protective film. In our sample report the aluminium coils make up 66% of raw material cost, so coil buying decides most of the margin. Coil prices follow aluminium prices.
Is BIS certification mandatory for aluminium composite panels?
Yes. Under the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026, aluminium composite panels must conform to IS 17682 and carry the BIS Standard Mark. The BIS copy of the order, checked in October 2026, shows immediate effect for all units, including micro and small enterprises. Goods made in India for export are excluded.
Is ACP sheet manufacturing profitable?
In our illustrative sample, a 2,100 square metres per day plant earns a return on investment of 18% in Year 3, with break-even at 43% of capacity and payback in about 4 years. Margins are thin because raw materials take 65.3% of sales. Profit depends on coil buying, the share of FR and PVDF panels sold and how much credit dealers take.
Which loan suits an aluminium cladding panel plant?
At ₹10 crore and above the project is far beyond the PMEGP limit of ₹50 lakh for manufacturing, so it is usually funded by a bank term loan and a cash credit limit. Micro and small units can seek CGTMSE cover, whose ceiling is ₹10 crore. The lender will want a report with CMA data, projections and DSCR.
What is the difference between aluminium cladding and ACP?
Aluminium cladding is any aluminium skin fixed to the outside or inside of a building. It can be solid aluminium sheet, a honeycomb panel or an aluminium composite panel (ACP). ACP is the most common form in India because it is light, flat and easy to rout and fold. This page and the sample report cover ACP manufacturing.
Is the sample report free and can I use it for a bank loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own line capacity, product mix, location and lender.
Sources and references
- Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026, S.O. 1319(E)Bureau of Indian Standards (order issued by DPIIT, Ministry of Commerce and Industry), checked Oct 2026
- IS 17682: 2021 Aluminium Composite Panel, Specification, Amendment No. 1Bureau of Indian Standards, checked Oct 2026
- Prime Minister's Employment Generation Programme (PMEGP) guideDistrict Industries Centre, Ganjam, Government of Odisha, checked Oct 2026
- Credit Guarantee Fund Trust for Micro and Small EnterprisesCGTMSE, checked Oct 2026
