REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 72 of 295 | Total 2950 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 72 294 295   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Potato Powder, Granules and Pellets

Potato powder is increasingly being used in a variety of food preparations like snack foods, soups, curries and other dishes as a thickening agent. Potato Granules are created during a process where the potato cells remain almost intact, which leads to a very low proportion of starch. Potato Granules can be soluble at high temperatures when use as a thickening agent. Potato pellets are intermediate non-expanded products made with raw materials potatoes. These semi-finished products are generally sold to snack manufacturers. India Potato production is likely to be lower at close to 100 lakh tonne this year, down from 110 lakh tonne in 2017. Revenue in the Potato Products segment amounts to US$3405m in 2018. The market is expected to grow annually by 6.5 % (CAGR 2018-2021). From an international perspective it is shown that most revenue is generated in the United States (US$9,504m in 2018). As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian major players are as under • Balaji Wafers Pvt. Ltd. • Indian Food Fermentations Ltd. • Kalindi Agro Biotech Ltd. • Southern Health Foods Pvt. Ltd.
Plant capacity: Potato Powder: 5 MT/Day Potato Granules : 2.50 MT/Day Potato Pellets: 2.50 MT/DayPlant & machinery: Rs 726 lakhs
Working capital: -T.C.I: Rs 1068 lakhs
Return: 27.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Baby Diaper and Sanitary Napkins

A diaper or nappy is a kind of underwear that allows one to defecate or urinate in a discreet manner. Most materials in the diaper are held together with the use of a hot melt adhesive which is applied in spray form or multi lines, an elastic hot melt is also used to help with pad integrity when the diaper is wet. Sanitary napkin, a universally needed product, has very low penetration in India and other developing countries, partly due to its high price and partly due to the tradition of using cheaper but unhygienic old cloth piece. As a result they become the host of many infectious diseases. This is due to lack of awareness and economic inability for adopting better precautions like use of good sanitary napkins during menstruation period. The Baby Diaper market is expected to reach around INR 200 Billion by 2022, growing at a double digit CAGR over the forecasted period 2017-2022. According to “India Diaper Market Outlook, 2021”, India’s diaper market was growing with a CAGR of 22.23% over past five years. India feminine hygiene market grew with a CAGR of about 16.05% in the period of five years. As a whole entrepreneur can venture in this field will be successful. Few Indian major players are as under • Carewell Hygiene Products Ltd. • Centron Industrial Alliance Ltd. • Diapers India Ltd. • Godrej Hygiene Products Ltd. • Gufic Biosciences Ltd. • H L L Lifecare Ltd.
Plant capacity: Sanitary Napkins (8 Pcs/Pkt) : 31250 Packets/Day Baby Diapers (4 Pcs/Pkt): 25000 Packets/DayPlant & machinery: Rs 704 lakhs
Working capital: -T.C.I: Rs 1331 lakhs
Return: 30.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Grape Wine

Wine can be made from grapes, fruits, berries etc. Most wine, though, is made from grapes. And no matter what the wine is made from, there must be fermentation, that is, that sugar be transformed into alcohol. If the amount of alcohol is relatively low, the result is wine. If it is high, the result is "distilled liquor," like gin or vodka. White wines can be made from pigmented grapes by removal of skins, pulp and seeds before juice fermentation. Wines might be "fortified," "sparkling," or "table." Wine production in India, though still at a nascent stage, is likely to reach 18 million liter this year and 21 million liter by 2018 from 17 million liter estimated last year, according to a study. The year-on-year growth rate has clocked five%, a just concluded study by the Associated Chambers of Commerce and Industry of India (ASSOCHAM) said. Thus, due to demand it is best to invest in this project. Few Indian major players are as under • Charosa Wineries Ltd. • Four Seasons Wines Ltd. • Grover Zampa Vineyards Ltd. • Indage Vintners Ltd. • Millennium Spirits Pvt. Ltd. • N D Wines Pvt. Ltd.
Plant capacity: Grape Wine (Each Bottle 750 ml Size): 444 Bottles/DayPlant & machinery: Rs 164 lakhs
Working capital: -T.C.I: Cost of Project: Rs 615 lakhs
Return: 29.00%Break even: 39.00%
Add to Inquiry Add to Inquiry Basket

Dehydrated Vegetables, Mushroom and Soup

Dehydrating vegetables once dehydrated, they take very little room to store. Nutrients aren’t destroyed as they are with canning. Nothing is spoiled. And dehydrated vegetables can store for years. Most vegetables can be dehydrated; some require blanching first, but for many vegetables, prep is as simple as chopping or slicing. Dehydration is the process of removing water or moisture from a food product. Removing moisture from foods makes them smaller and lighter. The dried and preserved vegetables market of India is expected to grow at a CAGR of 16% by the year 2020. The supportive agro-climatic conditions, potential domestic market, cost competitiveness, and government support are some of the key factors which will drive the growth of this industry. The rising demand of seasonal vegetables across the year is supporting the growth of Dehydrated Vegetable market during the forecast period. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under • A S R Agro Ltd. • Agro Dutch Inds. Ltd. • Classic Mushrooms Ltd. • Coduras Exports Ltd. • Flex Foods Ltd. • Gujarat Dehyd Foods Ltd. • Himalaya Food Intl. Ltd.
Plant capacity: Dehydrated Vegetables, Mushroom & Soup: 3130 Packs/DayPlant & machinery: Rs 102 lakhs
Working capital: -T.C.I: Cost of Project: Rs 394 lakhs
Return: 27.00%Break even: 62.00%
Add to Inquiry Add to Inquiry Basket

Mango Pulp With Cold Storage

Mango Pulp is prepared from selected varieties of Fresh Mango Fruit. Fully matured Mangoes are harvested, quickly transported to the fruit processing plant, inspected and washed. Selected high quality fruits go to the controlled ripening chambers; Fully Ripened Mango fruits are then washed, blanched, pulped, deseeded, centrifuged, homogenized, concentrated when required, thermally processed and aseptically filled maintaining sterility. As mango is a seasonal fruit, about 20% of fruits are processed for products such as puree, nectar, leather, pickles, canned slices, and chutney. These products experience worldwide popularity and have also gained importance in national and international market. The export of Senegal’s mangoes has greatly increased over the years. From 8,500 tons about 3 years ago and today we are exporting about 16,500 tons.
Plant capacity: Mango Pulp: 32.50 MT/Day Mango Concentrate: 16.25 MT/DayPlant & machinery: Rs 1885 lakhs
Working capital: -T.C.I: Cost of Project: Rs 3232 lakhs
Return: 27.00%Break even: 47.00%
Add to Inquiry Add to Inquiry Basket

Liquid Glucose From Broken Rice

Liquid Glucose is usually manufactured by subjecting starch to high temperature in the presence of acid. However, Liquid Glucose of same Dextrose Equivalent can be manufactured by enzymatic conversion but the spectrum of saccharides will differ and so also the properties, in comparison to acid converted Liquid Glucose. Liquid Glucose is an aqueous solution of nutritive saccharide obtained by starch hydrolysis, by using Corn and Rice as raw material, which is purified and concentrated to required solids. It is usually odorless and clear yellow colored viscous liquid sweet syrup which is processed and stored under hygienic conditions. Broken rice is the by-product of rice mill. It has various uses out of which one use is to prepare liquid glucose from broken rice. About 90% of the liquid glucose produced in India is consumed by the confectionery industry. Its preparation of sugar candy. It standard confectionery being about 33%. It is used also in textile printing and in biscuit and tobacco canning. The rest of this is used in leather, textile pharmaceutical and other industries. The domestic demand for liquid glucose had been estimated as 10000 MT/annum of which 7500 tones are used in the confectionery plants and are therefore widely distributed in their crude from. Which facilitates the development of new technologies and ensure a high quality product
Plant capacity: Liquid Glucose: 140 MT/DayPlant & machinery: Rs 1267 lakhs
Working capital: -T.C.I: Cost of Project: Rs 2275 lakhs
Return: 25.00%Break even: 43.00%
Add to Inquiry Add to Inquiry Basket

LPG Cylinder Refilling Plant

Liquefied Petroleum Gas is a Propane / Butane mixture liquefied under normal ambient temperature and moderate pressures. It is a safe, clean burning, reliable, high calorific value fuel. The detailed design of filling plants, and the associated cylinder filling equipment, should be undertaken by an appropriate supplier based on the required performance specification. The basic operations undertaken in the filling plant and maintenance areas e.g. cylinder inspection, cylinder filling, leak testing, checks to ensure no overfilling, cylinder evacuation and vapor recovery, re-valving, cylinder requalification, maintenance and repair of cylinders, grit blasting, painting, etc. Application of LPG in the industrial sector is also increasing, owing to growing use of LPG as a feedstock in petrochemical plants in the country. Moreover, rising demand from transport segment and increasing consumption of LPG to produce various chemical components such as propylene, ethylene, butadiene, etc., is further anticipated to boost demand for LPG in the country in the coming years. The mini-filling plant concept makes LPG easily accessible in many parts of the country. Approximately 65% of the LPG demand is located in countries. This facilitates the development of new technologies and ensures a high quality product.
Plant capacity: 16000 Pcs./DayPlant & machinery: Rs 1391 lakhs
Working capital: -T.C.I: Cost of Project: Rs 11166 lakhs
Return: 30.00%Break even: 31.00%
Add to Inquiry Add to Inquiry Basket

Demand for Potato Flakes is on the Rise

Demand for Potato Flakes is on the Rise. How to Start Potato Flakes Factory. Profitable Food, Agriculture Manufacturing Business Idea. Potato Processing for Production of Flakes Potato flakes are flat chunks of dehydrated mashed potato. Potatoes are cooked and mashed, then crushed by rollers on the surface of a drum. The mashed potato is fast-dried until its humidity reaches the desired level, then the layer of dried, mashed potato is scraped from the drum. This sheet is broken up by a mill sifter, and the resulting flakes are then packed. These flakes are the main ingredient in pre-mashed potato sold in food stores, and are also an important ingredient in other food products. The flakes are very easy to rehydrate: the potato starch retains its considerable absorbency, because the flakes are produced by dehydrating them in one quick phase. They are also used in commercially available products, like instant mashed potatoes, croquettes, pasta and fabricated snacks. As a thickener, they enhance creamy frozen desserts, gravies and chocolate milk. Like other dehydrated potato products, they extend the shelf life of baked goods. India is a very insignificant player in the global trade of dehydrated potato products. The exports of dehydrated products from India are only to neighboring countries in form of dehydrated slices, dehydrated chips, powder, etc. manufactured by small scale units Potato flakes are most often used as an ingredient in manufactured snacks or bakery foods. After wheat, rice and maize, potato is the most important food crop in the world. It contributes to almost 50% of the total tuber and root crop production. Potato has a good food value as compared to other staple food crops as it is rich in carbohydrates and also contain proteins, minerals like calcium and potassium and vitamins like vitamin C. One of the world's major food crops is potato, which produces a high amount of edible energy. Potato is a rich source of vitamin, iron, potassium and dietary fibre. Potato flakes, on the other hand, was derived by dehydrating the potato, so that it can be used in a various application and the nutrients present in a potato can be incorporated in various food products. The potato flakes are light and are very easy to digest. The potato flakes are also used as a replacement for various flour such corn flour, wheat flour etc. In a country such as India, potato flakes are used for various Indian delicacies like aloo bonda, fillings for samosa, dosa, aloo bhujia, aloo paratha, etc. Because of the earthy flavour of potato flakes are also used in baked goods such as bread, cakes, muffins etc. Potato flakes are widely used in the processing and manufacturing of the convenience foods, frozen foods, prepared foods for it flour thickening, oil and water-holding, incremental filling, Shell making and so on. The storage and transportation of the potato flakes are safe, the cost is low, and shelf life is longer. Using the potato flakes to replace the fresh potato will greatly simplify the production process; reduce the cost and increase productivity. The storage and transportation cost of the potato flakes are far lower than the fresh potatoes. Potato flakes have a vast application and through experiments new uses of potato are being developed. The product is generally used for the following end uses: • Instant Mashed Potatoes - The flakes are mixed with warm milk or water for making instant mashed potatoes which is one of the common items for a continental breakfast. • Extruded and other Snacks - Fabricated snacks (Pringle, Potato sticks), Croquettes, Pasta • Bakery Industries - Used as anti-stalling agent to slow the drying effect and to improve crust colour • Meat Processing - In recipes like minced mutton balls, fish cutlets, meat/chicken nuggets etc. Potato flakes are used as extender and binder • As Thickener - Creamy frozen desserts, gravies and chocolate milk • Soups & Premixes - As a thickener in ready to use soup powders, gravies and other food premixes • Formed Products - Patties, Cutlets etc. • Instant Noodles etc. - For instant noodles, dried powdered mixes for sauces and stews. In India potato is used for wide varieties of food which are quite different from other countries. The application of potato flakes has been developed successfully for a number of products and culinary experts are continuing their efforts in developing many more applications. In International market Potato flakes is used as an ingredient in industries like Bakery, Fish, Meat, Snack food, dried instant soup, baby food, etc. and by all chips and french fries producing industries like Baked Lay (Frito Lay, USA), RAS Potato Mash (Rixona B.V., Holland), Pringles (Procter & Gamble) etc. Potato flakes market is segmented on the basis of packaging, end use, distribution channel, nature, and region. On the basis of packaging, the market is segmented into retail packaging and bulk packaging. Bulk packaging is mostly purchased by restaurants and hotels, whereas retail packaging is more purchased by the consumers for their household. The demand for potato flakes is more from the common consumers as potato flakes can be used as a thicking agent, which adds up the volume to soups, stews, sauces, and broths. On the basis of nature, the potato flakes market is segmented into organic and conventional. The demand for organic potato flakes is on the rise, owing to rising number of health-conscious people across the globe. Consumer’s increasing demand for ready-to-eat snack foods which is easy to digest is playing a key role to drive the potato flakes market in the forecast period. Increasing opportunities in hotels and restaurant is also a key factor which is driving the global potato flakes market. Potato flake-based food products have a rich amount of fibre content which helps in the reduction of body fat. Potato flakes are very popular among old age people as it is very easy to digest, this factor is boosting the growth of potato flakes to a great extent. The potato flakes have an increased shelf life which does not affect the quality of the final product, which is also another key driving factor for the growth of potato flakes market. As potato flakes is a rich source of vitamin c, it helps to boost the immunity of the body. Furthermore, it contains flavonoid which keeps the level of bad cholesterol low, these factors are also going to drive the potato flakes market to a significant extent in the forecast period. Dehydrate potato product market is segmented by form as dehydrated potato dices, dehydrated potato flakes, dehydrated potato shreds, dehydrate funeral potato, dehydrated potato gems, and gratin. Dehydrated potatoes have long shelf life and are available in the global market. People love to eat ready-to-eat dehydrate potato products as snacks. Dehydrate potato products have a very good taste and take less to time to cook. Dehydrate potato product market is segmented by type of dehydrate potato as Fries, low-fat fries, low-salt fries, red skin potato, baked dehydrate potatoes. Dehydrate potato fries are the most preferred type of dehydrate potato product and most consumed type of dehydrate potato product followed by baked potato, red skin potato, and other types. Dehydrate potato product market is growing at a good pace and is likely to hit good number in the future. Tags Potato Flakes Processing, Potato Flakes Making Plant, Potato Processing, How to Manufacture Potato Flakes, Potato Flakes Manufacturing Plant, Potato Flakes Manufacturing Plant, Process for Making Dehydrated Potato Flakes, Potato Processing for Flakes, Potato Flakes Production, Production of Food Potato Flakes, Potato Flakes Industry in India, Process for Producing Dehydrated Potato Flakes, Pre-Feasibility Study for Potato Flakes, Dehydrated Potatoes, Production of Potato Flakes, How to make Dehydrated Potato Flakes? Pre-Feasibility Study Potato Powder and Flakes Manufacturing Unit, Potato Processing Industry, Production of Dried Potato Flakes, Potato Flakes Production, Potato Processing and Uses, Potato Flakes Manufacture, Potato Flakes Food Industry, Potato Processing, Potato Flakes Making Business, Potato Industry, Potato Flakes Manufacturing Project Report, Most Profitable Food Processing Projects and Agro Based Business, Potato Flakes Processing Unit in India, Flakes Manufacturing Unit, Flakes Manufacturing Project Report, Potato Flake Production Company, Profitable Potato Processing Business Ideas, Potato Flakes Manufacturing project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, Potato Flakes Manufacturing Based Small Scale Industries Projects, Project profile on small scale industries, How to Start Potato Flakes Manufacturing Industry in India, Potato Flakes Manufacturing Projects, New project profile on Potato Flakes Manufacturing industries, Project Report on Potato Flakes Manufacturing Industry, Detailed Project Report on Potato Flakes Manufacturing, Project Report on Potato Flakes Manufacturing, Pre-Investment Feasibility Study on Potato Processing, Techno-Economic feasibility study on Potato Processing, Feasibility report on Potato Processing, Free Project Profile on Potato Flakes Production, Project profile on Potato Flakes Manufacturing, Download free project profile on Potato Flakes Production, Startup Project for Potato Flakes Manufacturing, Project report for bank loan, Project report for bank finance, Project report format for bank loan in excel, Excel Format of Project Report and CMA Data, Project Report Bank Loan Excel
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Production of Disposable IV Cannula and Catheters

Production of Disposable IV Cannula and Catheters, Intravenous Catheter Industry, Medical Plastic Device Business The catheter is a thin sterilized tube made from medical grade materials and can offer a broad range of medical conditions. Catheters can also be inserted into a body cavity, duct or vessel for drainage, administration of fluids or gasses. Catheters used to access for surgical instruments and also to perform a wide variety of other tasks depending upon the type of catheter. Intravenous or IV therapy is beneficial for several conditions and medical situations including dehydration, nutrition, shock, surgery, blood transfusions, chemotherapy and medication administration. A small tube placed into peripheral vein in order to administer medication directly into the circulation is known as a peripheral intravenous (IV) catheter. In addition to medication administration, peripheral intravenous (IV) catheters are used to withdraw blood from veins for testing. Advanced peripheral intravenous (IV) catheters are equipped with additional safety features to avoid needle stick injuries. Due to their direct contact with the circulatory system, peripheral intravenous (IV) catheters are prepared with nonirritant material such as silicone, which do not have side effects even when peripheral intravenous catheters are left in contact with the circulatory system for several months or weeks. The Indian market for peripheral intravenous catheters (PIVCs) is split up into 2 segments: conventional PIVC and safety PIVC. PIVCs are inserted in veins and arteries. An arterial access site is utilized in patients that require blood pressure monitoring. Firmer catheters are preferred for arterial access. A venous access site is utilized for infusing fluids, providing antibiotic treatment and other standard procedures. In 2016, safety PIVCs represented 12% of the total market for PIVCs, with the remaining balance represented by conventional PIVCs. Growth in the unit sales of advanced materials PIVCs is expected to drive gains in the share of safety PIVCs over the forecast period. Peripheral intravenous (IV) catheters are commonly used for vascular access. Medicine administered through a peripheral intravenous (IV) catheter enters directly into the blood flow and thus shows rapid action. With the advantage of rapid action, peripheral intravenous (IV) catheters are commonly used in emergency patients, surgical patients and patients suffering from vomiting, pediatric patients, unconscious patients and the elderly population, who face difficulty in swallowing medicines. Factors such as aging of population and advancement in surgical and treatment technologies resulting in increased surgical procedures are driving the global peripheral intravenous (IV) catheters market towards growth. On the other hand, factors such as high cost of closed catheters, painful insertion and need of trained medical professional to use peripheral intravenous (IV) catheters are restraining the growth of the global peripheral intravenous (IV) catheters market. Based on the type of catheters commercially available, the global peripheral intravenous (IV) catheters market is segmented as follows: • Integrated/Closed catheters • Peripheral insertion catheters Use of integrated/closed intravenous (IV) catheters is rapidly increasing over conventional intravenous (IV) catheters due to capacity of integrated catheters to apply power while injecting medicine in the circulation. Integrated intravenous (IV) catheters are used for injecting contrast media into the circulation system prior to computed tomography (CT) imaging. On the other hand, high cost of the integrated peripheral intravenous (IV) catheters is restraining the growth of integrated peripheral intravenous (IV) catheters market in economically backward markets. The increasing incidences of trauma (accidents and burns) cases, the prevalence of chronic diseases, and cases of hospital-acquired infections is attributing to the growth of the global IV catheters market. The global peripheral intravenous catheter market is expected to observe steady growth in 2016, reaching beyond US$ 3.8 Bn by 2016 end. Wide adoption of catheterisation techniques in patient examination, diagnosis, and treatment is anticipated to fuel the demand for PIVC. Rising disease prevalence will play a key role in driving the market growth. North America is likely to remain the largest market; Asia Pacific is expected to emerge at the fastest rate. Soaring disease prevalence will remain a prominent factor driving the demand for catheterisation, in turn pushing the market for PIVC. Apart from its usage in drug administration, increasing adoption of peripheral intravenous catheter in body fluid collection during a patient’s physical examination, is also identified to be a key driver to market growth. Prevalence of infections and epidemics are expected to further spur the demand for catheters in hospitals, clinics, ambulatory surgical centres, home healthcare units, and other healthcare centres. In addition to constantly enhancing healthcare infrastructure, the healthcare spending of consumers is also on the rise, which will favour the market growth. By product type, the global peripheral intravenous catheters market is segmented into short PIVC and integrated/closed PIVC. Among these, integrated/closed PIVC segment is expected to register fastest CAGR of 8.9% during the forecast period. Short PIVC segment is expected to contribute a maximum share to the global peripheral intravenous catheters market. Non-ported PIVC product type sub-segment is expected to register fastest CAGR over the forecast period. Globally, catheters market is driven mainly due to the continuous rise in population of cardiovascular disorders patients across the world. Diabetes, tachycardia, hypertension are no more rare among individuals. At present, each country has shown the marked rise in diabetes and hypertension patients supported by various lifestyle factors which include smoking, drinking, and sedentary lifestyle. These factors increasing demand for minimally invasive surgeries which propel the growth of global catheter market. In addition, growing aging population, favorable reimbursement policies and increasing demand for advanced urinary catheters are major factors leading to increased demand for urinary catheters, thereby fuelling the growth of the catheter market. Cannula is a thin tube which is inserted in to the human body veins or body cavity to introduce medication, removal off fluid or to insert the surgical instrument. Cannula is usually surrounded by the trocar needle with inner and outer surface, which allows puncturing of the body in order to get enough space, it is also named as intravenous IV cannula. The normal cannulas size mainly ranges around 14 – 24 gauge. There are various types of cannula such as venous cannula, arterial cannula, nasal cannula or an oral-nasal cannula. The venous cannula is used for inserting in veins for the removal of blood samples and for administering medicines. An arterial cannula is used to insert in the artery of human body commonly in the radial artery during major operations such as bypass surgery and are also used to measure beat to beat blood pressure this is a painful procedure that leads to stress and anxiety. The nasal cannula or the oral nasal cannula used in the insertion into nostrils and mouth and also for delivering oxygen or to measure the airflow into the nose. Uses A venous cannula is inserted into a vein, primarily for the administration of intravenous fluids, obtaining blood samples and administering medicines. An arterial cannula is inserted into an artery, commonly the radial artery, and is used during major operations and in critical care are as to measure beat-to-beat blood pressure and to draw repeated blood samples. IV Cannula is amongst the most extensively used medical disposables. Healthcare professionals represent the largest end-use market for cannulae. Worldwide market for IV Cannula is driven by an aging population and related rise in healthcare demand. There are many manufacturer of IV Cannula in the country, out of which about 5-6 units are under small-scale sector. The Present demand of Disposable IV Cannula is being adequately met by indigenous production. In increasing awareness in health care and like diseases and improvement in per capita income is expected to create further growth in demand of disposable IV Cannula. IV Cannula have lower coefficient of thermal expansion and hence have greater accuracy. It is unbreakable. The IV cannula market is estimated to grow at a CAGR of 6.2% from 2017 to 2022 to reach USD 13.63 Billion by 2022. The base year considered for the study is 2017 and the forecast for the market size is provided for the period between 2017 and 2022. The global peripheral intravenous catheter market was valued at US$ 3,500 Mn in 2014. North America was the largest market for peripheral intravenous catheters, accounting for over 45% revenue share of the overall market in 2014, followed by Europe with around 27% share. The demand for peripheral I.V. catheters is increasing, due to increasing prevalence of chronic and lifestyle associated diseases. The prevalence of chronic diseases, such as heart disease, cancer, stroke, respiratory disease and diabetes, is increasing due to the alteration in lifestyle and lack of access to preventive care. The increasing aging population is propelling the growth of the global peripheral I.V. catheter market, as the geriatric population is more susceptible to diseases, sickness and syndromes, due to less regenerative abilities. This leads to the increased demand for drugs, thus leading to the growth in adoption of peripheral I.V. catheters for delivering drugs, supplying nutrients and for the treatment of various diseases. Moreover, the increase in healthcare expenditure leads to an increased affordability and accessibility of the treatment for various conditions. Tags IV Catheter Production, Manufacturing Business of Medical Disposables, IV Cannula Manufacturing Plant, IV Catheter Manufacturing, Catheter Manufacturing, Project Report on Manufacturing Medical Plastic Catheters, Intravenous Catheter Industry, IV Cannula, IV Cannulae, IV Canula, Manufacture Intravenous Catheter, Medical Disposable Product, IV Cannula Manufacture, Cannula, Catheter Manufacture, Infusion Therapy Product, How Catheter is made, I.V. cannula manufacturing, Project report for manufacturing of I.V. Cannula, IV Cannula Manufacturing Unit, Disposable Medical Devices manufacture, Production of IV Cannula, IV Cannula Production, Production of IV Catheter, I.V. Cannula Manufacturing Plant, Infusion Set Manufacture, Production Plant of I.V. Cannula, IV Cannula Manufacture in India, Catheter Manufacturing, Medical Device Manufacturing, Catheter Manufacturing Process, Disposable syringe with Needle, I.V. Catheter Manufacture, IV Solutions Factory, Production of I.V. Catheter, Medical Disposable Products, How to Start IV Catheter Production Plant, Catheter Production, Project Report on Manufacturing Medical Plastic Catheters Syringes, Start a Disposable Syringes Manufacturing Business, Peripheral Intravenous Cannula, IV Catheter Manufacturing project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, IV Catheter Manufacturing Based Small Scale Industries Projects, Project profile on small scale industries, How to Start IV Cannula Production Industry in India, IV Catheter Manufacturing Projects, New project profile on IV Catheter Manufacturing industries, Project Report on IV Catheter Manufacturing Industry, Detailed Project Report on IV Cannula Production, Project Report on IV Cannula Production, Pre-Investment Feasibility Study on IV Cannula Production, Techno-Economic feasibility study on IV Cannula Production, Feasibility report on IV Cannula Production, Free Project Profile on IV Cannula Production, Project profile on IV Cannula Production, Download free project profile on IV Catheter Manufacturing, Startup Project for IV Catheter Manufacturing, Project report for bank loan, Project report for bank finance, Project report format for bank loan in excel, Excel Format of Project Report and CMA Data, Project Report Bank Loan Excel, Intravenous Catheter Industry, Medical plastic device
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Production of Concrete Admixtures (Additives)

Production of Concrete Admixtures (Additives). Construction Chemicals. Admixture. Chemical Admixtures used in Concrete. Admixtures are artificial or natural materials added to the concrete besides cement, water and aggregate to improve certain property of concrete during casting or setting or service stage. A material other than water, aggregates, or cement that is used as an ingredient of concrete or mortar to control setting and early hardening, workability, or to provide additional cementing properties. Admixtures are generally used to alter the properties of concrete (such as increased workability or reduced water content, acceleration or retardation of setting time, acceleration of strength development, and improved resistance to weather and chemical attacks) to make it more suitable for a particular purpose. For example, calcium chloride can be used to accelerate strength development in mass concrete during winter. Air-entraining admixtures (inexpensive soaps, detergents, etc.) entrain air which greatly improves the workability of concrete and thus permits the use of harsher and more poorly graded aggregates and also those of undesirable shapes. Functions of Admixture Major functions and advantages of using admixtures are detailed below: • To improve workability of fresh concrete • To improve durability by entrainment of air • To reduce the water required • To accelerate setting & hardening & thus to produce high early strength • To aid curing • To impart water repellent / water proofing property • To cause dispersion of the cement particles when mixed with water • To retard setting • To improve wear resistance (hardness) • To offset / reduce shrinkage during setting & hardening • To cause expansion of concrete and automatic prestressing of steel • To aerate mortar / concrete to produce a light-weight product • To impart colour to concrete • To offset or reduce some chemical reaction • To reduce bleeding • To reduce the evolution of heat Concrete admixtures are used to enhance the properties of concrete for applications in concrete works with special requirements. Concrete admixtures are used to modify the properties of concrete to achieve desired workability in case of low water cement ratio, and to enhance setting time of concrete for long distance transportation of concrete. Market Outlook The demand for concrete admixtures is directly related to cement consumption trends. Some of the drivers of the concrete admixtures market are improving quality of construction in developing economies, increasing demand for high rise buildings, roads, bridges, tunnels and dams. Reduction in water usage and construction time is the major concerns of contractors and manufacturers, which could be rightly addressed by making effective use of concrete admixtures. Indian admixtures market revenues are projected to grow at a CAGR of around 12% during 2014-19. The worldwide concrete admixtures market, along with its applications, witnessed high growth in the past few years and is likely to continue so in the coming years. The drivers identified for the concrete admixtures demand are growing infrastructure requirements in developing economies, improving economics of construction, and shifting preferences of population towards urbanization. It is also influenced by consumer awareness, need for durable and aesthetic civil structure, and other benefits achieved in making concrete structures more economical for contractors and other stakeholders. The market size, in terms of value, of concrete admixtures is estimated to be USD 11.68 Billion in 2015 and is projected to reach USD 18.10 Billion by 2020, at a CAGR of 9.15% between 2015 and 2020. The Asia Pacific concrete admixtures market, along with its end products, has witnessed a linear growth in the past few years and this growth is estimated to increase in the coming years. Concrete admixtures are chemical formulations that are added to concrete at the initial mixing stage to enhance or modify the properties and workability of the mix. Concrete admixtures are used to enhance strength, durability, chemical resistance, and other properties, thus making concrete more suitable to satisfy the needs of modern civil structures. Concrete admixtures have found wide acceptance in the construction industry worldwide; especially for the construction of residential buildings, industrial amenities, and social and commercial complexes, and surface transportation infrastructure projects. The concrete admixtures market in Asia Pacific has been experiencing significant growth in recent years, which is expected to continue in the near future, mainly driven by the highly growing demand from various end-use industries. Considerable amount of investments are being made by the various market players to serve the end-user applications in the future. China is the largest market for concrete admixtures market in the Asia-Pacific region, having accounted for 76.3% of the total Asia-Pacific demand in 2014. Tags Concrete Admixtures, Admixtures for Concrete, Production of Concrete Admixtures, Manufacturing Cost of Production of Concrete Admixtures, Concrete Admixture Manufacture, Concrete Admixtures Production Line, Concrete Admixtures Equipment, Concrete Admixtures Production Plant, Report on Concrete Admixtures Production, Concrete Admixture Production Plant, Concrete Admixture Manufacturing Process in India, Concrete Admixture Formulation, Formulation of Concrete Admixture, Manufacturing Process of Concrete Mixture, Concrete Admixture Manufacture in India, Manufacturing of Concrete Admixture, How to Start Manufacturing Company of Concrete Admixture, Raw Material of Concrete Admixture, Concrete Formulations and Admixtures, Concrete Admixture Formulation and Preparation, Admixtures for Construction Industry, Production Plant of Concrete Admixture, Concrete Admixtures Production project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, Concrete Admixtures Production Based Small Scale Industries Projects, Project profile on small scale industries, How to Start Concrete Admixtures Production Industry in India, Concrete Admixtures Production Projects, New project profile on Concrete Admixtures Production industries, Project Report on Concrete Admixtures Production Industry, Detailed Project Report on Concrete Admixtures Production, Project Report on Concrete Admixtures Production, Pre-Investment Feasibility Study on Concrete Admixtures Production, Techno-Economic feasibility study on Concrete Admixtures Production, Feasibility report on Concrete Admixtures Production , Free Project Profile on Concrete Admixtures Production, Project profile on Concrete Admixtures Production, Download free project profile on Concrete Admixtures Production, Industrial Project Report, Business guidance to clients, Startup Project for Concrete Admixtures Production, Concrete Admixtures (Additives), Chemical admixtures, Construction Chemicals, Admixture, Chemical Admixtures used in Concrete, Chemical Concrete Admixture
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 72 of 295 | Total 2950 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 72 294 295   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top