Google Search

Search

Already a Member ?

Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 4 of 295 | Total 2950 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 294 295   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Automatic Papad Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The Word "PAPPAD" is quite familiar with Indians. Pappad is a common Indian food normally taken with meals. Some people take it along with tea also. It is a food which is liked by people of all states, people doing all type of occupations. It is well within the reach of common people. Pappad can be exported to other countries and can earn valuable foreign exchange as people in other countries have also taken interest in this food item. Some time before pappads were made at home by the ladies and most of them know the process of making them. At present also some of the housewives are making these, but their number has decreased considerably. However, they used to make them for their captive uses only. Pappad's are of different types i.e. made from urad dal, potatoes, rice etc. However, process of making all of them is very simple and absolutely identifical except the formulations which may change according to one's taste. Pappad's may be made by using red or black pappers and their quantities may also be altered to make the product strong or light in chilly. As a result of the organised efforts of domestic and global players, the breakfast items have come now to include cereals, energy bars, fresh dairy products and fruit juices. Estimated at a modest Rs 2.5 bn, the market includes cornflakes, muesli, pancakes, oatmeal and porridge. It is growing fast not only because of macro factors, such as acceptance of packaged food and rising household incomes but also because companies have become innovative. The market is estimated to be growing annually up to 30%, and with modern retail providing new recipes of the contemporary products, Indian and Western, a strong wave of growth is anticipated. So any new entrants can venture in to this industry. Few Indian Major Players are as under:- Bikaji Marketing Ltd. Desai Brothers Ltd. Empire Spices & Foods Ltd. Madhur Industries Ltd. R C L Foods Ltd. Shri Mahila Griha Udyog Lijjat Papad Sunrise Spices Ltd.
Plant capacity: 75000 Kgs /AnnumPlant & machinery: Rs. 15 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 34 Lakhs
Return: 25.00%Break even: 74.00%
Add to Inquiry Add to Inquiry Basket

Sanitary Napkins - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Sanitary Napkin comes under Nonwoven fabrics which as a whole come under technical textile.Technical textiles are defined as textile materials and products used primarily for their technical performance and functional properties rather than their aesthetic or decorative characteristics. Thus Non woven Fabrics are broadly defined as sheet or web structures bonded together by entangling fibre or filaments (and by perforating films) mechanically, thermally or chemically. They are flat, porous sheets made directly from separate fibres or from molten plastic or plastic film. They are not made by weaving or knitting and do not require converting the fibres to yarn. Feminine hygiene (lady napkins) is hygiene absorbent products engineered to absorb and retain body fluid without causing any leakage. The user should always feel dry and comfortable. It consists of an absorbent pad sandwiched between two sheets of nonwoven fabric. Today, the global market for absorbent hygiene products is over US$ 50 bn (including wipes). The evolution of hygiene products in Europe and the North America has taken 4 to 5 generations. Feminine care was introduced over 100 years ago. Baby diapers were invented 60 years ago. Adult incontinence products appeared 30 years ago. As a whole establishing Sanitary Napkin Unit is one of the project which has good prospect for the entrepreneurs to invest. Few Indian Major Players are as under:- Carewell Hygiene Products Ltd. Godrej Consumer Products Ltd. Gufic Biosciences Ltd. Hindustan Unilever Ltd. Johnson & Johnson Ltd. Kimberly Clark Lever Pvt. Ltd. Procter & Gamble Hygiene & Health Care Ltd.
Plant capacity: 1296 Lakh Nos. /AnnumPlant & machinery: Rs. 103 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 980 Lakhs
Return: 33.00%Break even: 36.00%
Add to Inquiry Add to Inquiry Basket

TMT Bars - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Steel is a generic name for a group of ferrous metals which due to their abundance durability versatility and low cost are most useful metallic material known to mankind. Thermo Mechanical Treatment (TMT) process for reinforcement bars is opening up new vistas in composite RCC, the re-enforcing steel is the costliest constituent (30 To 40% Per Cu. M. of concrete). This cost can be substantially reduced by using higher grades of steel re-enforcing bars. The higher yield strength of re-bars lowers the steel requirement, which results in reduced cost of construction. In India, high strength re-bars of yield strength up to 500 N/sq. mm. are produced either by cold twisting or micro-alloying or a combination of both which adds considerably to the cost of the re-enforcement bars. In the production of TMT bars the carbon is restricted to below 0.20% for imparting better ductility and bend-ability and to ensure better weld-ability. The carbon equivalent of the steel is controlled by the addition of Manganese (from 0.50% to 1.0% depending on the grade of the TMT bar being produced. In case of production of corrosion resistant TMT bars, corrosion-resisting elements are suitably added in the steel. Global steel production has crossed the 1 billion ton mark due to an upturn in steel demand during the last few years on the back of recovery in the global economy. Global steel trade has now increased to around 350 MT. The industry though continues to be fragmented with top 5 players accounting for less than 20% of the total industry capacity. Global steel manufacturers are increasingly realizing the need to have alliances and consolidation activity has picked up all over the world during the last 2-3 years. Due to demand growth, it is a good project for entrepreneurs to invest & any entrepreneurs venture into this field will be successful.
Plant capacity: 30000 MT /AnnumPlant & machinery: Rs. 277 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 857 Lakhs
Return: 69.00%Break even: 25.00%
Add to Inquiry Add to Inquiry Basket

Rubber Compound Toys (using Plaster of Paris) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Toys are used by everybody in his child hood. Every house has few toys. Rubber toys are one of the cheaper and best substitutes of electronic toys, plastic toy and other type of toys. Two types of hollow rubber toys of various sizes can be made by plaster casting process depending on the type of rubber used viz. Hard and soft. These are used for entertaining children. The elasticity and resilience of natural and synthetic rubber products make them ideal for use in toys, sports and fitness applications. The rubber products have been custom compounded for use in slingshots, horse ties, turkey calls, exercise resistance bands, dog toys, fishing lures and more. Choose an existing product or contact us to create a custom rubber product with the ideal material and color for recreation application. The Indian toy industry is estimated at about 850 million US dollars and until now has generated only 0.5 per cent of the global market. The growth of around 15 per cent promises to rapidly raise this figure, especially in the context of the growing middle class and the increasing willingness to spend money on luxury goods. India itself has more than 800 toy manufacturers, exporters and suppliers, which means that 60 per cent of the market is handled by Indian manufacturers and foreign companies with subsidiaries in India. The Toy Association of India estimates that about 90 per cent of the Indian toy industry belongs to the non-organized sector. Any entrepreneurs venture into this field will be successful. Few Indian Major Players are as under:- Andhra Polymers Pvt. Ltd. Elgi Rubber Co. Ltd. Magnus Rubber Inds. Ltd. Precision Seals Mfg. Ltd. Sundaram Industries Ltd. Swastik Rubber Products Ltd. Thejo Engineering Ltd.
Plant capacity: 15 Lakh Pcs. /AnnumPlant & machinery: Rs. 48 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 299 Lakhs
Return: 24.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Thermocol Cups, Glass and Plates - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost & Revenue

Thermocol is formed by the synthesizing of spherical particles consisting of air (at a rate of 98%) contained within an infinite number of hollow cells. These cells, forming a structure of pellets fused together, give consistency and rigidity to the final product. The advantages are many: the product’s manufacturer requires very little energy, thereby allowing full weight to be given to ecological consideration. Of fundamental importance is the treatment with the vapor, which, as well as having a technical function during the manufacturing process, renders the product hygienic through sterilization. Thermocol is a good resister of cold and heat but since it is a petroleum product it dissolves in any solvent of petroleum. Foamed plastics materials have achieved a high degree for importance in the plastic industry. Foams can be made soft and flexible to hard and rigid. Expanded polystyrene is one of such foams. It may be used such as thermal insulation material; acoustic treatments shock protective packaging, etc. Its properties can be varied widely in manufacture to meet both general and specific demands. Today the demand on the global styrene market is on a gradual rise. The EPS and ABS demand rise is the key driver of the styrene market development. It is expected that the demand growth tempo will keep the significant indexes through the coming 2-3 years, supporting that way the styrene production and price in the foreseeable future. Polystyrene and Expandable Polystyrene Market is Expected to Grow at a Healthy Rate of 5.6% from 2010-2020. So any new entrants can venture in to this industry.
Plant capacity: Thermocol Cups : 85320 Th. Pcs. /Annum,Thermocol Glasses: 85320 Th. Pcs. /Annum,Thermocol Plates: 384000 Th. Pcs./AnnumPlant & machinery: Rs. 244 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 496 Lakhs
Return: 27.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Pan Chutney - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

The Betel (Piper betle) is the leaf of a vine belonging to the Piperaceae family, which includes pepper and kava. It is valued both as a mild stimulant and for its medicinal properties. Betel leaf is mostly consumed in Asia and elsewhere in the world by some Asian emigrants, as betel quid or paan, with or without tobacco, in an addictive psycho-stimulating and euphoria-inducing formulation with adverse health effects. The betel plant is an evergreen and perennial creeper, with glossy heart-shaped leaves and white catkin. Betel chewing is firmly embedded in the traditions of South-East Asia and enjoyed, even revered, on several levels. The most obvious reason as to why people chew betel is for social affability, in a way similar to westerners drinking coffee together. The betel quid is also used as a medicine to cure a variety of illnesses ranging from headaches to skin infections. Betel is also believed to be a powerful link in contacting supernatural forces and as such is intricately entwined with the rites of animistic worship which give it magical qualities. There are so many flavored pan chutney which has smoothly accepted by Indian people due to their variable tastes. Many dried fruits are used to make this like mango, pineapple, strawberry, saffron, khus etc which gives a unique taste to it and makes it attractive and addictive to the people fond of paan. The markets of pan chutney are growing more in India and it has ample scope to take the attention of paan lovers for more sell. Some companies like Gopal, Minar, Meenakshi are leading with that item and they are expecting more growth in near future with lots of prospects. As a whole it is a good project for entrepreneurs for investment.
Plant capacity: 30 Lakh Bottles/AnnumPlant & machinery: Rs. 62 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 332 Lakhs
Return: 28.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

Spices (100 % EOU)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Spices which are basically plant products, have a definite role to play in enhancing the taste flavour, relish or piquancy of any food; most of the spices are fragrant, aromatic & pungent. They comprise seeds, bartes, rhizamer, leaves fruits and other parts of plants, which belong to varigated species and genera since time immemorial, India in renamed to be the wave of spices. Most important spices like black pepper (king of spices) cardamom (queen of spices), ginger, chillis and turmeric, which are produced in India import it great reputation, and these constitute. In the list of spices, clove, nutmeg, cinnamon and cassia are known as tree spices, however, spices like fennel, fenugreek, garlic, onion, coriander, cumin, vanilla, saffron; etc. Now a day’s use of spice as ground form is changed towards in the liquid form. It is actually use of spice oil. Spicy oil drops are so much more active rather than ground powder. Ground powder is much more used in compare to oil drops. Oil drops are basically essential aromatic oils, which has very good specific spicy flavour. For Export Oriented Unit, should be quality conscious. Laboratory should be cleaned. There is no adulteration in the product; product should be totally microbial free. Quality of the products and factory premises should satisfy I.S.O standard. There is no other country in the world that produces as many kinds of spices as India. India grows over 50 different varieties of spices. The total production is around 2.7 million tonnes. Of this, about 0.25 million tonne (8-10 per cent) is exported to more than 150 countries. India holds a prominent position in the world spice production. It commands a formidable position in the world spice trade with 48 per cent share in volume and 44 per cent in value. Thus, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under:- A V T Mccormick Ingrediants Pvt. Ltd. A V Thomas International Ltd. Aarkay Food Products Ltd. Bhagat International Pvt. Ltd. Chordia Food Products Ltd. Complete Spice Solutions India Ltd. Devon Foods Ltd. Dharampal Satyapal Ltd. Eastern Overseas Ltd. Empire Spices & Foods Ltd. Global Green Co. Ltd. Global Natural Products Ltd. Gokul Agro Inds. Ltd. Harmony Spices Ltd. Indana Spices & Food Inds. Ltd. Indian Chillies Trading Co. Ltd. Indian Products Ltd. Jagat Industries Ltd. Kedar Spices Ltd.
Plant capacity: 6 Lakh Pouches/AnnumPlant & machinery: Rs.14 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 44 Lakhs
Return: 28.00%Break even: 68.00%
Add to Inquiry Add to Inquiry Basket

Card & Gray Board from Pulp and Waste Paper - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Card Board and Grey Board are important grades of paper boards. The importance of paper board as an essential commodity is constantly increasing with the expansion of education among the people. Further, in a progressive society, the consumption of paper is closely linked to its economic, social and cultural activities. The consumption of card board, grey board, etc. in for various purposes such as, for making cartons for medicines, for pharmaceutical packagings, for making boxes for shoes, hosiery and other items for book-binding, for making registers for flat files, for sale of textile goods etc. Card Board & Grey Board itself in a superior packaging material and due to rapid industrialization is in very good demand. Grey board is a homogeneous board made usually of mixed waste paper with or without screenings and pulp on a board machine. Grey board is used where stiffness rather than printability is required. Plenty of raw materials for making of the boards are available in India. The world consumption of paper and paperboard is estimated at over 300 mn tonns a year. It is constituted broadly of 30% of cultural papers (writing and printing), 14% of newsprint, and the balance of kraft and packaging paper including paperboards. The Indian production is about 2 to 3% of the global total. The overall value of the market is estimated at Rs 250 bn. In volume terms, the segment is presently estimated at over 6.9 mn tonne. In India, the cultural varieties account for over 40% of the production and speciality papers including coated papers for about 8%. This leaves about less than half for kraft and boards if the newsprint varieties are excluded. The newsprint takes over a million tonne or about 15% of the total. Due to demand growth, it is a good project for entrepreneurs to invest.
Plant capacity: 1500 MT/AnnumPlant & machinery: Rs. 58 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 177 Lakhs
Return: 24.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

India Emerging Business Opportunities: Cold Chain Sector (Why to Invest, Project Potential, Core Financials, Market Size & Industry Analysis)

Often termed as the sunrise sector, cold chain logistics hold immense growth potential in India. Rising Indian Population, mounting consumer incomes and changing preferences have led to increased focus on food security and health services. The demand for processed food has also risen sharply necessitating the support from efficient cold chain logistics of the country. Responding to the high growth opportunities in the cold chain logistics sector, Niir Project Consultancy Services has released a new research report titled ‘India Emerging Business Opportunities: Cold Chain Sector (Why to Invest, Project Potential, Core Financials, Market Size & Industry Analysis)’ which identifies cold chain sector as a promising & lucrative investment option. The report classifies the sector after scrutinizing the various aspects like value drivers of the sector, the regulatory environment and prevalent subsidies, potential buyers, present players and the project details. While expanding a current business or while venturing into new business, entrepreneurs are often faced with the dilemma of zeroing in on a suitable product/line. And before diversifying/venturing into any product, they wish to study the following aspects of the identified product: • Good Present/Future Demand • Export-Import Market Potential • Raw Material & Manpower Availability • Project Costs and Payback Period We at NPCS, through our reliable expertise in the project consultancy and market research field, have identified cold chain project which satisfies all the above mentioned requirements and has high growth potential in the Indian markets. The report, at first, discusses the present scenario and components of the industry as a whole covering the structure, segmentation and components. And then moves on to elaborately illustrate the factors that make case for investing in the sector. Industries like organized food retail and QSR (Quick Service Restaurants) owe much of their growth to the cold chain sector. An effective cold chain infrastructure forms the very backbone of the food industry in India. In the view of rising population and appalling healthcare status, ensuring food security to every Indian and easy availability of medicines has scored as a top priority in government agenda. The sector has effervescent future with the much revered government backing, apparent growth in user industries and favorable demographics of the country. Elaborating on the government support, the report disseminates information on various subsidies and government schemes applicable for cold chain development in the country followed by the outlook of the sector. The report further navigates through the key player information of the sector. It includes company profiles of players like Kausar India, Snowman Logistics and Fresh & healthy Enterprises along with a snapshot of their financials and contact details of other players as well. Now, the part which forms the core of the report is the ‘Project Details’ segment. It includes project details like list of machinery and basic project financials. Project financials like plant capacity, costs involved in setting up of project, working capital requirements, projected revenue and profit are listed in the report. Indian market is evolving with changing lifestyles, rising urbanization and growing disposable incomes which will be the key benefactors of growth in cold chain user industries like Food service industry, processed food industry and organized retail industry. Additionally mounting government endeavors towards reducing food wastage and penetrating healthcare in deep corners of the country will help in strengthening cold chain infrastructure in India. The cold chain sector in India is still in the nascent stage with enormous growth potential on the back of climatic diversification and geographically vast size of the country. Indian cold chain sector was estimated to be at INR 245 billion in 2013 and we anticipate it to cross INR 600 billion mark in the next 4 years. Reasons for buying the report: • This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, market potential of the product and reasons for investing in the product • This report provides vital information on the product like its definition, characteristics and segmentation • This report helps you market and place the product correctly by identifying the target customer group of the product • This report helps you understand the viability of the project by disclosing details like machinery required, project costs and snapshot of other project financials • The report provides a glimpse of important subsidies applicable on the industry • The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decisions Our Approach: • Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years. • The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players • We use reliable sources of information and databases. And information from such sources is processed by us and included in the report Table of Contents 1 OVERVIEW 1.1 Definition 1.2 Components 1.3 Structure 1.4 Segmentation 2 POTENTIAL BUYERS 3 REASONS FOR INVESTING 3.1 Expanding Organized Retail 3.2 High Food Wastage 3.3 Numerous User Industries 3.3.1 QSR industry 3.3.2 Pharmaceutical Industry 3.3.3 Processed Food Industry 3.4 Government Support 3.5 Favorable Demographics 3.6 Growing Affordability 4 REGULATORY ENVIRONMENT 4.1 Subsidies & Incentives for Investment in Cold Chains 4.2 Government Schemes & Benefits 5 PRESENT PLAYERS 5.1 Company Profiles 5.1.1 Kausar India Ltd 5.1.2 Snowman Logistics Ltd 5.1.3 Fresh & Healthy Enterprises Ltd 5.2 Contact Details 7 OUTLOOK 8 PROJECT DETAILS 8.1 List of Machinery 8.2 Project Financials 9 ABOUT NPCS 10 DISCLAIMER List of Figures & Tables Figure 1 Cold Chain Figuration Figure 2 Key Steps Involved in a Cold Chain Figure 3 Indian Cold Chain Industry- Components Figure 4 Indian Cold Chain Industry- User Segments Figure 5 Indian Cold Chain Industry- User Industries Figure 6 Indian Food Retail Industry- Structure Figure 7 Food Wastage in India across Various Categories (As a % of Total Production) Figure 8 QSR Industry in India- Market Size (2011-17, In USD Billions) Figure 9 Indian Pharmaceutical Industry- Market Size (2012-17, In INR Billions) Figure 10 Cold Storage Capacity (As a % of Total Food Production) Figure 11 Indian Population Distribution by Age Figure 12 Indian Population- Rural & Urban (In Crores) Figure 13 India's Annual Per Capita Income (2008-14, In INR) Figure 14 Indian Middle Class Population (Current-2026) Figure 15 Indian Cold Chain Industry- Market Size (2009-17, In INR Billions) Table 1 Presence of Key Food Retailers in India- Total Stores Table 2 Level of Food Processing Over Various Food Segments Table 3 Kausar India Ltd- Financial Summary (2010-12, In INR Millions) Table 4 Snowman Logistics Ltd- Financial Summary (2010-12, In INR Millions) Table 5 Fresh & Healthy Enterprises Ltd- Financial Summary (2011-13, In INR Millions) Table 6 Contact Details of Key Players in Cold Chain Segment Table 7 Cold Storage- List of Machinery Table 8 Cold Chain Plant- Capacity Table 9 Cold Chain Plant- Fixed Capital Requirements Table 10 Cold Chain Plant- Monthly Working Capital Requirements Table 11 Cold Chain Plant- Total Cost of Project Table 12 Cold Chain Plant- 5 Year Profit Analysis (INR Million)
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Market Research Report on Edible Oils in India (Present Status, Future Prospects, Industry Growth Drivers, Demand Scenario, Opportunities, Company Financials, Market Size, Sector Insights, Analysis& Forecasts upto 2017)

Edible oil sector in India is riding high on consumption boom in India. The sector has been witnessing a shift in consumer preferences, on the back of rising health awareness among population, which will be the key benefactor for its growth going ahead. To enable a better understanding of the industry status and prospects, Niir Project Consultancy Services has released a new research report titled ‘Market Research Report on Edible Oils in India (Present Status, Future Prospects, Industry Growth Drivers, Demand Scenario, Opportunities, Company Financials, Market Size, Sector Insights, Analysis & Forecasts upto 2017)’. The report analyzes Indian edible oil sector in profundity by sharing industry vitals like present status, structure, growth drivers, opportunities, demand-supply scenario and financial details of industry players. The report first focuses on the basic details of the industry like its structure and classification and then moves ahead with the growth potential analysis. It captures the future prospects of the industry by scrutinizing demand drivers and existing growth opportunities for edible oils in India. The analysis so established is meticulously expounded and supported by graphical representation and forecasts of key indicators. The report identifies growing population, urbanization, rising incomes and health consciousness as key value drivers that will benefit the industry in the near future. It further talks, in detail, about the present as well as the future demand supply scenario of edible oils in India. India produces a very trivial quantity of edible oils out of its total estimated demand and hence is largely dependent on imports. The demand supply situation in the sector is analyzed in various lights by studying the total consumption of edible oils in the country, per capita consumption, domestic production of edible oils, production of oil seeds and imports of edible oils in India. The report also includes forecasts of the total consumption numbers with respect to changes in the per capita consumption of edible oils. Although India is the largest producer of oilseeds in the world, a lot is left to be done to ensure self-sufficiency in edible oils. It also lists the prevalent excise and customs duty rates on edible oils. The report then moves ahead to give business and financial details of incumbents in the industry which gives a fair view of the competition in the sector. It covers business profiles of companies like K.S Oils Ltd, Adani Wilmar Ltd, Ruchi Soya Industries Ltd and Marico Ltd holding brands like Fortune, Saffola, Sunrich, K S Gold etc. The next segment provides complete financial details of edible players in the country. It covers contact information like address of registered office, director’s name and financial comparison covering balance sheet, profit & loss account and several financial ratios of the players. The report ends with a promising outlook of the sector. The industry has all the triggers in place to ensure a smooth ride in future. The favorable consumer dynamics of Indian market like rising disposable incomes, escalating population, urbanization and fast growing health consciousness among Indian population has kept the industry at high pedestrian. All these factors will be the growth benefactors of edible oils in the near future. Also, although Indian per capita consumption of edible oils is on the rise, yet we still lag behind the developed nations of the world which construes as a massive opportunity for edible oil players. Changing consumer preferences towards healthy oils will fuel the growth in small niche segments which were not explored till now and will send growth ripples across the segments (laterally as well as perpendicularly). The industry being highly fragmented in nature restricts the accurate estimation of its market size. However we estimate the edible oil consumption to cross 21 million tonnes mark by 2017. Reasons for Buying this Report: • This research report helps you get a detail picture of the industry by providing overview of the industry along with the market definition, structure and its components • The report provides in-depth market analysis covering major growth driving factors for the industry and opportunities prevalent • This report helps to understand the present status of the industry by elucidating a comprehensive scrutiny of the demand – supply situation with forecasts • Report provides analysis and in-depth financial comparison of major players/competitors • The report provides forecasts of key parameters which helps to anticipate the industry performance Our Approach: • Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years. • The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players • We use reliable sources of information and databases. And information from such sources is processed by us and included in the report Table of Contents 1 OVERVIEW 1.1 Structure 1.2 Classification 2 DEMAND DRIVERS & OPPORTUNITIES 2.1 Growing Population Base 2.2 Urbanization & Evolving Eating Routines 2.3 Rising Preference for ‘Healthy Oils’ 2.4 Escalating Incomes 2.5 Surging Modern Trade 2.6 Low Per Capita Consumption 2.7 Rising Share of Branded Oils 3 DEMAND-SUPPLY SCENARIO 3.1 Demand Analysis 3.1.1 Consumption of Edible Oil 3.2 Supply Analysis 3.2.1 Production of Edible Oils 3.2.2 Production of Oilseeds 3.2.3 Imports 4 EXCISE & CUSTOMS DUTY 5 KEY PLAYER INFORMATION 5.1 Key Player Profiles 5.1.1 Marico Ltd 5.1.2 Ruchi Soya Industries Ltd 5.1.3 K.S Oils Ltd 5.1.4 Adani Wilmar Ltd 5.2 Peer Group Financials 5.2.1 Contact Details 5.2.1.1 Registered Office Address 5.2.1.2 Directors Name 5.2.2 Key Financials 5.2.2.1 Plant Capacity & Sales 5.2.2.2 Raw Material Consumption 5.2.3 Financial Comparison 5.2.3.1 Assets 5.2.3.2 Liabilities 5.2.3.3 Growth in Assets & Liabilities 5.2.3.4 Structure of Assets & Liabilities 5.2.3.5 Income & Expenditure 5.2.3.6 Growth in Income & Expenditure 5.2.3.7 Cash Flow 5.2.3.8 Liquidity Ratios 5.2.3.9 Profitability Ratios 5.2.3.10 Return Ratios 5.2.3.11 Working Capital & Turnover Ratios 6 INDUSTRY SIZE & OUTLOOK 7 ABOUT NPCS 8 DISCLAIMER List of Figures & Tables Figure 1 Edible Oils Industry in India- Structure Figure 2 Types of Oilseeds & Edible Oils Produced in India Figure 3 Population of India (2008-17, In Millions) Figure 4 Indian Population- Rural & Urban (In Crores) Figure 5 QSR Industry in India- Market Size (2011-17, In USD Billions) Figure 6 India's Annual Per Capita Income (2008-14, In INR) Figure 7 Indian Retail Industry- Structure Figure 8 Per Capita Consumption of Edible Oils in India and the World (In Kgs) Figure 9 Growing Share of Branded Oils in Indian Edible Oil Industry Figure 10 Consumption of Edible Oils in India (2009-17, In Million Tonnes) Figure 11 Domestic Production of Edible Oils in India (2010-17, In Million Tonnes) Figure 12 Production of Oilseeds in India (2009-14, In Million Tonnes) Figure 13 Total Area under Oilseed Cultivation in India (2009-13, In '000 Hectares) Figure 14 Edible Oil Imports in India (2009-14, In Million Tonnes) Figure 15 Share of Imports in Total Demand for Edible Oils in India (2009-14) Figure 16 Marico Ltd- Shareholding Pattern (March 2014) Figure 17 Ruchi Soya Industries Ltd- Shareholding Pattern (March 2014) Figure 18 K.S Oils Ltd- Shareholding Pattern (March 2014) Table 1 Presence of Key Food Retailers in India- Total Stores Table 2 Consumption Growth of Edible Oils at Various Per Capita Levels Table 3 Domestic Production of Various Edible Oils in India (2009-12, In Lakh Tonnes) Table 4 Net Domestic Availability of Edible Oils in India (2009-12, In Lakh Tonnes) Table 5 Production of Various Oilseeds in India (2009-12, In Lakh Tonnes) Table 6 Production of Oilseeds (Kharif & Rabi) in India (2009-14, In Lakh Tonnes) Table 7 Area under Oil Seed Cultivation (2009-13, In '000 Hectares) Table 8 Excise & Customs Duty on Edible Oils in India (2013-14) Table 9 Marico Ltd- Subsidiaries Table 10 Marico Ltd- Consolidated Financial Summary (2011-13, In INR Millions) Table 11 Ruchi Soya Industries Ltd- Subsidiaries Table 12 Ruchi Soya Industries Ltd- Consolidated Financial Summary (2011-13, In INR Millions) Table 13 K.S Oils Ltd- Subsidiaries Table 14 K.S Oils Ltd- Consolidated Financial Summary (2010-12, In INR Millions) Table 15 Adani Wilmar Ltd- Subsidiaries Table 16 Adani Wilmar Ltd- Standalone Financial Summary (2011-13, In INR Millions)
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 4 of 295 | Total 2950 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 294 295   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top