Google Search

Search

Already a Member ?

Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 10 of 295 | Total 2944 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 294 295   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Aluminium Beverage Cans - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The aluminium beverage can is now the popular choice for carbonated and still soft drinks, mineral waters, beers and lagers. It competes successfully against drinks containers of glass, plastic and steel, and is the only drinks container for which closed loop recycling applies; a used aluminium drinks can is recycled back into aluminium can sheet for the manufacture of another aluminium drinks can. The good thermal properties of aluminium mean that the drinks can is quickly chilled. It has good rigidity and strength without the grave disadvantages of a glass bottle, of being fragile and dangerous when broken and much heavier than an aluminium can. It is lighter than steel and even a steel beverage can relies on aluminium for the top of the can since the better control on gauge and properties of aluminium mean that the easy open end of the can only be made in aluminium. Aluminium cans are most typical among metal containers. Canned foods are found in great abundance all around us, and include processed fisheries products such as crab, tunaa and sardine. Processed fruits, processed agricultural products such as sweet corn and asparagus, and daily products such as corned beef, cheese and butter. More recently, canned soft drink and bear are gaining popularity at a rapid pace in concert with the wide acceptance of automatic vending machine. Aluminium cans provide long-term food quality preservation benefits. Aluminium cans deliver 100 percent protection against oxygen, light, moisture and other contaminants Few Indian Major Players are as under • A M-Tech Packs Ltd. • Punsumi Foils & Components Ltd. • Shatrunjay Extrusions Ltd.
Plant capacity: Aluminium Beverage Cans : 1,000 thousand Nos/DayPlant & machinery: Rs 1663 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 2957 Lakhs
Return: 26.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Plastic Injection Moulded Products (Buckets, Tumblers, Tubs & Toilet Bowl Cleaning Brush) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials

Injection moulding is one of the most important processes used in plastic articles manufacture in terms of volume thermo-plastics handled and the range of articles manufactured. Injection molding is the most versatile process for the manufacture of plastic products with various shapes, sizes, and dimensions. It continues to be the process of choice for the production of articles with complex three-dimensional (3-D) shapes. Injection molding has been used to produce articles based on composites, foams, rubber and thermosets, in addition to thermoplastics. In fact, in recent years, injection molding methods have been used to manufacture metallic and ceramic products. Many innovations have been introduced to improve the efficiency and versatility of the process and products, including gas and water assisted injection molding and micro-injection molding. The process of injection moulding can be applied with modifications to thermosetting materials also and differs from transfer moulding in that the plasticizing chamber contains enough material to fill the mould several times. The thermoplastics material in general used for injection moulding in clued polyethylene PVC polystyrene, polypropylene, polymethyl metacrylate PTFFZ polyamides, cellulose, derivatives polyurethanes, CAB and polycarbonates. The thermoplastics find numerous application as injection moulded goods. Few of them are given as under:- 1. Buckets 2. Battles 3. Goggles 4. Toys 5. Trays 6. Cycle seat. 7. Cabinets for radio transistors tape recorder T.V. and other electronic appliances Few Indian Major Players are as under • A B C O Plastics Ltd. • Bluplast Industries Ltd. • Bright Brothers Ltd. • Brite Automotive & Plastics Ltd. • Clear Mipak Packaging Solutions Ltd. • Fancy Fittings Ltd. • Mutual Industries Ltd. • National Plastic Inds. Ltd. • National Plastic Technologies Ltd. • National Polyplast (India) Ltd. • Nilkamal Ltd. • Peacock Industries Ltd. • Prima Plastics Ltd. • Synthetic Moulders Ltd. • Wim Plast Ltd.
Plant capacity: Moulded Products : 100 MT/ Day,Toilet Cleaner Brush : 5000 Nos/DayPlant & machinery: Rs 155 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 653 Lakhs
Return: 33.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

High Pure Dissolved Acetylene Gas - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Acetylene (C2H2) is known as one of the simplest and most significant chemical in the acetylene series. A compound of carbon and hydrogen, acetylene is a colorless, highly flammable gas that dissociates at normal to low pressures and needs to be stored in high-pressure tanks containing some porous material and acetone. It has active chemical property; it is easy to polymerize, synthesize and cause chemical reactions. Acetylene is the most common gas used for fueling cutting torches in both general industry and the mining industry. When mixed with pure oxygen in a cutting torch assembly, an acetylene flame can theoretically reach over 5700°F. Users of this type of equipment are generally familiar with the fire hazards associated hot flames and the production of hot slag. However, many users may not be aware of the unique characteristics of acetylene itself that create special hazards compared to other fuel gases. Physical Properties • Acetylene is a colorless gas. It has a garlic odor. The odor is due to presence of impurities of phosphorous and hydrogen sulphide. However, pure acetylene has pleasant odor. • It is insoluble in water but highly soluble in acetone and alcohol. Acetylene is transported under high pressure in acetone soaked on porous material packed in steel cylinders. • Its boiling point is –84°C. • It is lighter than air. It is somewhat poisonous in nature. • It burns with luminous flame and forms explosive mixture with air. Uses And Applications Acetylene has many commercial and technical applications. The most known application for acetylene is for oxyacetylene welding, cutting and heat treating. The majority of acetylene is use in the chemical synthesis process for the manufacturing of many organic compounds such as acetaldehyde and acetic acid. Few Indian Major Players are as under • Asiatic Gases Ltd. • Bombay Oxygen Acetylene Ltd. • Bombay Oxygen Gases Ltd. • Ellenbarrie Industrial Gases Ltd. • Mangalam Gases Ltd. • National Oxygen Ltd. • Premier Cryogenics Ltd. • Southern Gas Ltd. • Superior Air Products Ltd. • Vikas Industrial Gases Ltd.
Plant capacity: Acetylene Gas : 360 M3/ DayPlant & machinery: Rs 68 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 260 Lakhs
Return: 25.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Fiber Optical Cables - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

An optical fiber (or optical fibre) is a flexible, transparent fiber made of extruded glass (silica) or plastic, slightly thicker than a human hair. It can function as a waveguide, or “light pipe”, to transmit light between the two ends of the fiber.Power over Fiber (PoF) optic cables can also work to deliver an electric current for low-power electric devices. The field of applied science and engineering concerned with the design and application of optical fibers is known as fiber optics. Optical fibers are widely used in fiber-optic communications, where they permit transmission over longer distances and at higher bandwidths (data rates) than wire cables. Fibers are used instead of metal wires because signals travel along them with less loss and are also immune to electromagnetic interference. Fibers are also used for illumination, and are wrapped in bundles so that they may be used to carry images, thus allowing viewing in confined spaces. Specially designed fibers are used for a variety of other applications, including sensors and fiber lasers. Fiber-optic communications is based on the principle that light in a glass medium can carry more information over longer distances than electrical signals can carry in a copper or coaxial medium or radio frequencies through a wireless medium. The purity of today’s glass fiber, combined with improved system electronics, enables fiber to transmit digitized light signals hundreds of kilometers without amplification. With few transmission losses, low interference, and high bandwidth potential, optical fiber is an almost ideal transmission medium. Few Indian Major Players are as under • Aksh Optifibre Ltd. • Birla Ericsson Optical Ltd. • Optel Telecommunications Ltd. • Spectra Punjab Pvt. Ltd. • Sterlite Telecables Ltd. • Tamilnadu Telecommunications Ltd.
Plant capacity: Fiber Optical Cables : 50 KMeters/DayPlant & machinery: Rs 3563 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 4266 Lakhs
Return: 19.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

High Pure Dissolved Acetylene Gas - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Acetylene (C2H2) is known as one of the simplest and most significant chemical in the acetylene series. A compound of carbon and hydrogen, acetylene is a colorless, highly flammable gas that dissociates at normal to low pressures and needs to be stored in high-pressure tanks containing some porous material and acetone. It has active chemical property; it is easy to polymerize, synthesize and cause chemical reactions. Acetylene is the most common gas used for fueling cutting torches in both general industry and the mining industry. When mixed with pure oxygen in a cutting torch assembly, an acetylene flame can theoretically reach over 5700°F. Users of this type of equipment are generally familiar with the fire hazards associated hot flames and the production of hot slag. However, many users may not be aware of the unique characteristics of acetylene itself that create special hazards compared to other fuel gases. Acetylene has many commercial and technical applications. The most known application for acetylene is for oxyacetylene welding, cutting and heat treating. The majority of acetylene is use in the chemical synthesis process for the manufacturing of many organic compounds such as acetaldehyde and acetic acid. The Indian industrial gases market is dominated by oxygen. Oxygen accounts for nearly 75% of total production of gases outside carbon dioxide in the merchant market. If the captive segment is included, oxygen enjoys an over 70% share in all gases (outside carbon dioxide). The gas industry in India has a large number of small plants spread all over the country. Also there are tonnage plants of global standards and capacity, which are set up in different parts of the country. Many fertilizer plants have created the facility to tap Argon through purge gas recovery units and some are also purifying the flu gas to produce carbon dioxide. The gas industry in India has kept its pace for growth to meet the requirement of growth of other sectors of the industry. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Asiatic Gases Ltd. • Bombay Oxygen Acetylene Ltd. • Bombay Oxygen Gases Ltd. • Ellenbarrie Industrial Gases Ltd. • Mangalam Gases Ltd. • National Oxygen Ltd. • Premier Cryogenics Ltd. • Southern Gas Ltd. • Superior Air Products Ltd. • Vikas Industrial Gases Ltd.
Plant capacity: 360 M3/DayPlant & machinery: Rs 67 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 260 Lakhs
Return: 25.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Foil Containers - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Aluminium is the most widely used non-ferrous metal and is extensively used in packaging materials. It is an excellent material for creating all types of containers. However, despite the fact that about seven billion aluminium foil containers are produced annually, most packaging engineers and packaging users know very little about the advantages that these containers bring to the packaging and food service industries. Aluminium foil containers are formed by combining mechanical and air pressure to force light gauge aluminium foil into a shaped die cavity. Esthetically appealing aluminium foil containers are ideal for table-ready service after the container has functioned first as a package and a heating utensil. Foil containers also come in a variety of colors and special purpose coatings. Moreover, its recyclability makes aluminium one of the most environment friendly materials on earth, a key advantage for planet conscious consumers and local governments. Additionally, recycled aluminium saves more than 95% of the energy necessary to produce new primary aluminium. Aluminium Foil Containers greatly used in daily life, it’s ideal for baking, grill, steaming, etc.,Commonly used in the kitchen, principally for the commercial preparation, packing and conveyance of foods. Often used in baking industry to contain food during the production and cooking phase. The food is subsequently conveyed and sold in the foil container. Today’s aluminium foil applications demonstrate the consumer friendliness. They vary from aseptic beverage cartons, wrappers, lids, blister and strip packs and more variations are in the pipeline. Also, aluminium foil is fully recyclable and modern separation techniques allow foil in household waste or separate collection systems to be extracted and recycled at a fraction of its original production energy. Very thin (laminated) foil based applications can also be incinerated with energy recovery. The aluminium foil industry in India was pioneered by India Foils, followed by Indian Aluminium Company. Currently, there are 4 major players who catering to the demand of the Indian market. The 4 major producers are, INDAL, India Foils, P G Foils, and Annapurna Foils. Thus, the aluminium foil industry is poised for spectacular growth in future.
Plant capacity: Aluminium Foil Containers Different Sizes : 1,475.0 Th.Nos./DayPlant & machinery: Rs 61 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 369 Lakhs
Return: 34.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Flexible Polyurethene Foam

During the past 40–50 years, foamed polymers have found increasing importance in the world market place due to the unique characteristics and properties they provide when compared to solid plastics. While most thermo sets and thermoplastics can be made in a foamed or cellular structure under certain conditions, the materials known as polyurethanes have become predominant for many applications in this field. Through the proper selection of the starting materials, foamed polyurethanes can range in characteristics from extremely soft, resilient cushioning products to very tough and rigid structural members. As varied as the products are, so too are the machines and processes used to produce them. Certain other systems, such as polyureas, are also processed with the same equipment as polyurethanes. The word polyurethane is somewhat misleading since, unlike most plastics, the final product is not made by polymerizing a monomer. Instead, the products contain a number of polyurethane groups in a complex structure that is controlled by the choice of starting materials and the production conditions. Polyurethane formulations cover an extremely wide range of stiffness, hardness, and densities. These materials include: • Low-density flexible foam used in upholstery, bedding, and automotive and truck seating • Low-density rigid foam used for thermal insulation and RTM cores • Soft solid elastomers used for gel pads and print rollers • Low density elastomers used in footwear • Hard solid plastics used as electronic instrument bezels and structural parts • Flexible plastics used as straps and bands The global polyurethane foam types are significantly penetrating their end-user industry market. These have different characteristics as per the manufacturing and their application requirement in the end products. The Asia-Pacific market is expected to dominate with its growing demand for polyurethane foams in different applications especially bedding & furniture, and building & construction. The polyurethane foam demand in terms of value and volume depicts the current and future projections according to the parallel economic and industrial outlook. This analysis covers major developments, expansions, agreements & mergers, and acquisitions of the leading global companies. As a whole it is a good project for new entrepreneurs for investment. Few Indian Major Players are as under • Arvind International Ltd. • Gandhigram Rubbers Ltd. • Harita Fehrer Ltd. • Harita Polymer Ltd. • Hind C-Bay Webtech Ltd. • M M Rubber Co. Ltd. • New Plastomers India Ltd. • Orion Laminates Ltd. • Packaging India Pvt. Ltd. • R T Packaging Ltd. • Sharp Industries Ltd. • Shroff Textiles Ltd. • Tirupati Foam Ltd. • Uflex Ltd. • Uma Polymers Ltd. • Victory Laminations Ltd.
Plant capacity: 15 MT/dayPlant & machinery: Rs 57 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 713 Lakhs
Return: 25.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Maize and its By Products (Maize Starch, Modified Starches & Animal Feed)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Maize and its By Products (Maize Starch, Modified Starches & Animal Feed) Corn starch, corn flour or maize starch is the starch derived from the corn (maize) grain. The starch is obtained from the endosperm of the corn kernel. Corn starch is a popular food ingredient used in thickening sauces or soups, and is used in making corn syrup and other sugars. Starch or amylum is a carbohydrate consisting of a large number of glucose units joined by glycosidic bonds. This polysaccharide is produced by most green plants as an energy store. It is the most common carbohydrate in human diets and is contained in large amounts in such staple foods as potatoes, wheat, maize (corn), rice, and cassava. Starch is processed to produce many of the sugars in processed foods. Dissolving starch in warm water gives wheat paste, which can be used as a thickening, stiffening or gluing agent. The biggest industrial non-food use of starch is as adhesive in the paper making process. Starch can be applied to parts of some garments before ironing, to stiffen them. Maize Starch is a mixture of polysaccharides about 74% amylopectin and 26% amylose. It is a fine White Powder, odorless, taste slight and characteristic and microbiologically suitable as Pharmaceutical grade, useful in Pharmaceutical and Food Industry as a binder, thickener, disintegrating agents in tableting and various formulations. Starch derivative is a growing industry, and with technological advancements taking place, new products are being launched on a regular basis. The various stakeholders in the industry are the raw material suppliers, processors, and the product manufacturers. Starch derivatives are applied in food & beverages, feed, and non-food applications like, pharmaceutical, cosmetics, paper making, bioethanol, and other industrial applications. Asia-Pacific Holds the largest market share in the global starch derivatives market, by geography, and is also estimated to achieve the highest growth rate. Any entrepreneurs venture into this field will be successful. Few Indian Major Players are as under • Advanced Bio-Agro Tech Ltd. • Advanced Enzyme Technologies Ltd. • Anil Nutrients Ltd. • Aries Agro Ltd. • Aries Marketing Ltd. • Godrej Agrovet Ltd. • Hanuman Minor Oils Ltd. • Indo Euro Indchem Ltd. • Intercorp Biotech Ltd. • Jupiter Biotech Ltd. • K S E Ltd. • Kapila Krishi Udyog Ltd. • Kerala Feeds Ltd. • Maharashtra Agro-Inds. Devp. Corpn. Ltd. • Metahelix Life Sciences Ltd. • Origin Agrostar Ltd. • Pan Asia Global Ltd. • Rama Pashu Aahar Pvt. Ltd. • S O L Ltd. • Shalimar Pellet Feeds Ltd. • Snam Vijaya Feeds Ltd. • Sonitpur Solvex Ltd. • Sukhjit Starch & Chemicals Ltd. • Superhouse Ltd.
Plant capacity: Maize Starch : 37.50 MT/day•Modified Starch : 45 MT/day•Animal Feed:45 MT/dayPlant & machinery: Rs 1105 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 2894 Lakhs
Return: 26.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

RUBBER POWDER FROM WASTE TYRES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Rubber is polymer of butadiene and one of the most important chemical ingredients, which is widely used in the different field of modern advance world. Rubber is specially used in the tyre Industry, which is used in the different type of vehicles. Rubber products require rubber as a raw material. Either natural rubber, which is often cultivated on large plantations – with all the problems associated with a monoculture or alternatively synthetic rubber, which is produced using crude oil. Both processes use a high amount of resources. At the end of the chain, mountains of used car tyres crop up on the landscape. These waste sites are taken on by used tyre and rubber recycling plants nowadays. Waste tyre recycling technology is very cost effective and performs 100% wastage tyre recycling (No churn left after the process). In this process no chemical ingredients are used, therefore it is environment friendly. Raw material (wastage tyre) is cheap and easily available, Generate economically valuable products out of waste tyres and products have good market value and demand. Also each recycled ton of tyres preserves 10 tons of carbon dioxide (CO2) that is a major green house gas. Some Uses of rubber powder Rubber powder has many applications like : Shoes factories, Tyres factories, Rubber connections factories, Oil seals factories, Hoses factories and likes. There is a rapid market increase of rubber powder in India. Demand of rubber powder in India is increased by 5%-8%. There is fair scope of this product. Presently reclaim rubber is used in the manufacture of tyres, butyl tubes, cycle tyres and tubes, battery containers, tread rubber, belts and hoses, moulded and extruded products. India ranks third in production and fourth in consumption of natural rubber in the world. Rubber plantations are spread over 5.9 lakhs hectares in 16 states. Production of natural rubber is dominated by small holdings (average holding size of 0.5 hectare), which account for 88 percent of the production. As a whole it is a good project for entrepreneurs for investment.
Plant capacity: Rubber Powder : 5.0 MT/day •By Product Steel Wire : 1.4 MT/dayPlant & machinery: Rs 116 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 246 Lakhs
Return: 26.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Ayurvedic Medicines (Chyawanprash, Cough Syrup Herbal, Ayurvedic Hair Oil, Jawahar Mohra & Mukta Shukti Tablets) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process

Man has always been keen to keep himself free from all miseries. It has been a constant endeavor to discover better ways to prevent and cure human disease. Human history is full of examples of foods developed for one or the other health benefit. Greeks used garlic in the first Olympic Games as they considered it as a performance-enhancing drug. Egyptians used honey to heal wounds. In India, the use of various herbs in daily diet for prevention and treatment is well known for ages. Cultural beliefs, experiences and availability of various herbs in India has made herbal preparations a part of Indian daily food supplements. The use of functional foods and nutraceuticals can be traced back to ancient Indian system of medicine. Ayurveda, a 5000 year old medical science. The classic texts of Ayurveda are full of references of the effects of food in various health conditions. Ayurveda clearly defines the use of food products for improving quality of life and general rejuvenation. Medicinal plants offer alternative remedies with tremensdous opportunities to generate income, employment andforeign exchange for developing countries. Many traditional healing herbs and their parts have been shown to have medicinal value and can be used to prevent, alleviate or cure several human diseases. India is one of the leading countries in Asia in terms of the wealth of traditional knowledge systems related to herbal medicine and employs a large number of plant species which includes Ayurveda (2000 species), Siddha (1121 species), Unani (751 species) and Tibetan (337 species). Today, ayurveda is an officially recognised system of medicine in India. Globally, the World Health Organization (WHO) recognises it as Traditional Medicine (TRM). It is estimated that the total market size of the Indian ayurvedic market size is Rs 8000 crore and it is growing substantially between 10-15 percent, with the same growth rate targeted for the next 10 years. Thus, due to demand it is a good project for entrepreneurs to invest.
Plant capacity: Chyawanprash: 500.0 Kgs/Day•Cough Syrup (Herbal): 200.0 Kgs/Day•Ayurvedic Hair Oil: 200.0 Kgs/Day•Jawahar Mohra Tablets :1.0 Kgs/Day•Mukta Shukti Tablets: 1.0 Kgs/DayPlant & machinery: Rs 69 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 474 Lakhs
Return: 24.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 10 of 295 | Total 2944 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 294 295   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top