Google Search

Search

Already a Member ?

Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 17 of 295 | Total 2944 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 294 295   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

SORBIC ACID - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Sorbic acid is a natural, organic preservative frequently used to maintain the freshness of a variety of human foods, drugs, and cosmetic products. Potassium sorbate and sorbic acid possess antifungal, and to a lesser extent antibacterial, properties. Sorbic acid also inhibits mold growth. Some of the important species that are suppressed by sorbic acid belong to the genera Alternaria, Botrytis, Cladosporiwn, Fusariwn, Mucor, Penicilliwn, Rhizopus, Trichoderma. Mold can be a problem in wine cellars. To control mold in the wine cellar, sorbic acid could be included in the antimicrobial compounds used for sanitizing. APPLICATIONS AND USES OF SORBIC ACID Here are a few specific applications with a few details: Dairy Products - The most common methods of application include dipping or spraying with potassium sorbate solutions for natural cheeses and direct addition for processed cheeses. For cottage cheese sorbic acid is added to the cream dressing before pasteurisation. Sorbic Acid in Beverage- Sorbic Acid is widely used as preservative in beverage. As preservative: in carbonated drinks, fruit drinks, dairy drinks to inhibit microbial. Sorbic Acid in Wines - Sorbic acid is used in table wines to prevent secondary fermentation of residual sugar. The addition of sorbic acid affords protection against recontamination by yeasts that have been heated or filter sterilized, but at these low levels it does not provide adequate protection against undesirable malolactic and acetic acid bacteria. ? Sorbic Acid in Pharmaceutical- Sorbic Acid is widely used apreservative in Pharmaceutical. As preservative: in intravenous injected liquid and nutrient solution to inhibit microbial. ? Sorbic Acid in Meat and Poultry - For fresh poultry, a dip in potassium sorbate significantly reduces the total number of viable bacteria and doubles the refrigerated shelf life. Country-cured hams sprayed with sorbate solution result in no mold growth for 30 days. ? Sorbic Acid in Fruit and Vegetable Products - Sorbates are applied as a fungistat for prunes, pickles, relishes, maraschino cherries, olives and figs. The same levels extend the shelf life of prepared salads ,eg, potato salad, coleslaw, tuna salad, etc. In the fermented vegetables, it is used to retard yeasts during fermentation. ? Sorbic Acid in Bakery Products - Sorbates are used in and/or on yeast-raised and chemically leavened bakery products. The use of sorbates in yeast raised products at one fourth the level that is normally added provides the same shelf life without adversely affecting the yeast fermentation. Sorbates added at one tenth the propionate level reduces the mix time by 30%. This internal treatment is used in combination to an external spray of potassium sorbate to increase the shelf life of bakery products. ? Sorbic Acid in Cosmetics- Sorbic Acid is widely used as preservative in Cosmetics. As preservative: in cosmetic and personal care product to inhibit microbial. SPECIFICATION: Description Unit Value Sorbic acid assay % 99.0 to 101.0 Water % <0.5 Heavy metal( as Pb) ppm <10 Melting range Deg>C 132-135 Residue on ignition % <0.2 Arsenic (as As) Ppm <3 DEMAND DRIVER The low toxicity of sorbic acid enhances its desirability as food preservative. The oral LD50 for sorbic acid in rats is lOg/kg compared to 5 g/kg for NaCI. The activity of the sorbates at a higher pH is one distinct advantage over the two other most commonly used food preservatives, i.e benzoic and propionic acids. Sorbates are classified as GRAS in the United States, with no upper limit set for foods that are not covered by Standards of Identity. Sorbates can be applied to food by any of several methods including direct addition, dipping in or spraying with an aqueous sorbate solution, dusting with sorbate powder, or impregnating food packing materials. The potassium salt is used in applications where high water solubility is desired. The continuous increase in food production has significantly increased the demand for food preservatives such as sorbic acid.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: 1.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Bare Conductors - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A wire or combination or wires not insulated from one another, suitable for carrying a single electric current is called conductor. The term conductor is not to include a combination of conductors insulated from one another, which would be suitable for carrying several different electric currents. Aluminium is a metal characterized by high resistance to corrosion, good electrical and thermal conductivity, and a density which is about one-third or less that of steel, copper, or nickel. Aluminium can be used as a power conductor, or for wire and cable shielding. Aluminium provides a lower weight to current-carrying ratio compared to copper. Aluminium has a lower tensile strength than copper, but approaches that of copper for the equivalent ampacity. When terminated with appropriate plating, hardware and processes as stipulated by the governing standards, Aluminium bussing, wiring and terminations prove to be as reliable as copper. Finally, the choice of Aluminium conductors can provide a significant cost savings. Aluminium and aluminium alloy conductors are the preferred and dominant conductors in several areas of power distribution. The major areas dominated by aluminium and aluminium alloy conductors are non-insulated overhead power transmission, insulated overhead power transmission and non overhead power distribution. Aluminium and aluminium alloy conductors offer good conductivity, light weight, excellent resistance to corrosion, good bending properties, greater tensile strength than copper and excellent compatibility with most common insulation used by the wire and cable industry. During 2010-2015, the Indian equipment manufacturing will grow at 5.5 times the growth rate of global electronic equipment production. Therefore, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Apar Industries Ltd. • Bagade India Engg. Ltd. • Bindawala Cables & Conductors Ltd. • Deepak Cables (India) Ltd. • E M C Ltd. • Eri-Tech Ltd. • Galada Power & Telecommunication Ltd. • Hirakud Industrial Works Ltd. • Jaipur Metals & Electricals Ltd. • Lunkad Aluminium Ltd. • Maharashtra Metal Powders Ltd. • Murarka Cables & Conductors Ltd. • Omega Cables Ltd. • Opal Industries Ltd. • Shashi Cables Ltd. • Smita Conductors Pvt. Ltd. • Traco Cable Co. Ltd. • Vidarbha Winding Wires Ltd.
Plant capacity: • All Aluminium Alloy Conductor: 10 MT/Day, Aluminium Conductor Steel Reinforced : 10 MT/DayPlant & machinery: Rs 580 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1141 Lakhs
Return: 27.36%Break even: 56.24%
Add to Inquiry Add to Inquiry Basket

Cement Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Cement is a material with adhesive and cohesive properties which make it capable of bonding minerals fragments into a compact whole. It can be defined as any substance, which can join unite two or more pieces of some other substance together to form a unit mass. It is an inorganic, non-metallic substance with hydraulic binding properties, and is used as a bonding agent in building materials. It is a fine powder, usually gray in color that consists of a mixture of the hydraulic cement minerals to which one or more forms of calcium sulfate have been added. Mixed with water it forms a paste, which hardens due to formation of cement mineral hydrates. Cement is the binding agent in concrete, which is a combination of cement, mineral aggregates and water. Concrete is a key building material for a variety of applications. Cement, as used in construction industries, which when mixed with water and allowed to set and harden can join different components or members together to give a mechanically strong structure. Thus cement can be used as bonding material for bricks or for bonding solid particles of different sizes (rubber masonry) to form a monolith. The most common use for cement is in the production of concrete. Concrete is a composite material consisting of aggregate (gravel and sand), cement, and water. As a construction material, concrete can be cast in almost any shape desired, and once hardened, can become a structural (load bearing) element. Indian cement industry, a leading manufacturing sub-sector in India, entered a new era after the partial decontrol in 1982 and near total free market in 1989, ahead of the dawn of the liberalisation era in the country. The industry was totally delicensed in 1991 under the Industries Development and Regulation Act. India is the second largest producer of cement in the world after China. It is followed by Japan and the USA. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • A C C Ltd. • Adani Cements Ltd. • Ambuja Cement Eastern Ltd. • Ambuja Cement Rajasthan Ltd. • Ambuja Cements Ltd. • Bharathi Cement Corpn. Pvt. Ltd. • Bhilai Jaypee Cement Ltd. • Birla Corporation Ltd. • Burnpur Cement Ltd. • Calcom Cement India Ltd. • Cement Corpn. Of India Ltd. • D L F Cement Ltd. • Eswar Cements Pvt. Ltd. • Garden Cements Ltd. • Gujarat High Tech Inds. Ltd. • High-Tech Lime Products Ltd. • I P I-S P Cement Co. Ltd. • India Cements Ltd. • J K Lakshmi Cement Ltd. • Jagadamba Cements Ltd. • Jaipur Udyog Ltd. • Makers Development Services Pvt. Ltd. • Malabar Cements Ltd. • Megha Technical & Engineers Pvt. Ltd. • Meghalaya Cement Ltd. • N C L Industries Ltd. • Namo Cements Ltd. • Prism Cement Ltd. • Raasi Cement Ltd. • Radhakishan Cement Ltd. • Rain Cements Ltd. • Samruddhi Cement Ltd. • Sanghi Industries Ltd. • Shree Digvijay Cement Co. Ltd. • Someswara Cements & Chemicals Ltd. • Sorabh Cement Ltd. • Trinetra Cement Ltd. • Ultratech Cement Ltd. • Uttar Pradesh State Cement Corpn. Ltd. • Varun Cements Ltd. • Visaka Cement Industry Ltd. • Vishwakarma Cements Ltd. • Zuari Cement Ltd.
Plant capacity: 200 MT/DayPlant & machinery: Rs 755 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1254 Lakhs
Return: 17.22%Break even: 61.78%
Add to Inquiry Add to Inquiry Basket

Leather Bags and Wallets - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Leather is considered as a symbol of fashion, uniqueness, trend and styles. The demand for quality leather products as well as accessories never ceases among the consumers. Individuals that are style sensitive and elegant always want to enhance their overall appearance by preferring quality leather products. Use of leather goods is increasing day by day. Now-a-days fancy leather goods are being used by the people of even remotest area of country, because lifestyle has been changing very fast. Fancy leather products are durable and beautiful to look at in comparison to other similar products. People use shopping bags to carry things to home, which they purchase from market. Different material like cloth, nylon, plastic etc are used for manufacturing of bags. But they are less durable and lack aesthetic appeal. Leather can be used for manufacturing high quality shopping bags to carry grocery, cloth, cosmetics and other such similar items. Most of the women used leather hand bags in India. The raw material availability is high in Tribal areas of AP and Orissa state. The industry depends on taning industry. The Indian leather industry is the 8th largest foreign exchange earner for the country. The product variation covers: (a) semi and finished leather, (b) footwear and footwear components, (c) garments for ladies and gents, (d) handbags for ladies and gents, (e) wallets, diaries and cardholders, (f) gloves and fashion accessories, (g) tableware, (h) upholstery (for houses, offices and vehicles), and (i) luggage and portfolio bags. Handbags, footwear and leather garments have the largest export growth potential in the leather sector, according to a study undertaken by the Export-Import Bank of India. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • A V Thomas Exports Ltd. • Beekay Niryat Ltd. • Cheviot International Ltd. • Crew B O S Products Ltd. • Euresian Equipments & Chemicals Ltd. • Gujarat B D Luggage Ltd. • Indo Korea Exports Ltd. • Sanyo Impex Ltd. • V I P Industries Ltd. Cost Estimation Capacity • Business Card Case : 100 Pcs/Day • Accordion Wallet : 100 Pcs/Day • Billfold Wallet Type 01 : 100 Pcs/Day • Billfold Wallet Type 02 : 100 Pcs/Day • Billfold Wallet Type 03 : 100 Pcs/Day • Passport Wallet : 100 Pcs/Day • Money Clutch : 100 Pcs/Day • Wash Bags : 100 Pcs/Day • City Bags : 100 Pcs/Day • Laptop Backpack : 100 Pcs/Day • Business Document Briefcase : 100 Pcs/Day • Business Laptop Briefcase : 100 Pcs/Day • Business Triple Compartment Bags : 100 Pcs/Day • Weekender Bags : 100 Pcs/Day • Wheeled Luggage: 100 Pcs/Day
Plant capacity: -Plant & machinery: Rs 28 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 264 Lakhs
Return: 26.37%Break even: 58.01%
Add to Inquiry Add to Inquiry Basket

Water Treatment Chemicals (Antiscalants and Membrane Cleaners) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

There has been a dramatic increase in the number of reverse osmosis and nano-filtration plant over the past ten years. There has also been a proliferation in the variety of feed sources used, including seawater, surface waters and, increasingly, effluents of varying qualities. Not surprisingly, therefore, is the parallel increase in the degree of scaling and fouling, resulting in the need for not only novel preventative antiscalant products in the field, but also new and improved cleaners where deposition has occurred. An essential part of the ability to correctly select and apply the most appropriate products lies in the development of laboratory analysis and predictive tools. Fouling potential is an inherent characteristic of membrane module design. The high membrane packing density required for good production rates results in low voidage for feed water flow. However, this need not result in detrimental performance. Fouling has been widely documented and researched since the first commercial use of membrane separations. It is important that this subject is addressed because membrane replacement is a considerable expense in the operation of an RO plant. In the case of large municipal and industrial systems, this cost can be prohibitive. Pre-treatment systems for RO plants are designed to produce a feedwater with a reduced fouling potential by removing potential fouling species prior to membrane treatment. Common foulants include: Calcium carbonate and calcium sulphate scales, Organic matter, Iron, Colloidal material, Bio-film and microorganisms, Silica, Natural humic and fulvic acids. Fumaric Acid Polymers are used as Antiscalants. The synthesis of the fumaric acid polymers follows a novel process that avoids the insolubility and low reactivity of fumaric acid in free radical reactions and that produces the polymer in high yield.
Plant capacity: Capacity Antiscalants: 5MT/Day, Membrane Cleaners: 5 MT/DayPlant & machinery: Rs 88 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 613 Lakhs
Return: 27.82%Break even: 63.96%
Add to Inquiry Add to Inquiry Basket

Cattle Feed - Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Cost of Project

The principal feed resources for animal consumption in the country are crop residues like straws of wheat, rice and other cereals and stovers, which are very poor in feed value. Even these are in short supply. These are supplemented to some extent by relatively better quality fodders like cultivated leguminous and non-leguminous fodder grasses and concentrates. The latter are formulated largely from agro-industrial by-product and forest wastes and small quantities of low-grade cereals with the present stock of feed and fodder resources available in the country, it is impossible to meet the nutrient requirements of even the present day low-producing cattle and buffaloes. Such a situation is bound to aggravate difficulties in the feeding of better producing livestock such as cross bred lows in exploiting their full genetic potentiality for early growth, better reproduction and higher milk production. Foods are the basic need of every one, similarly feed for cattle’s is also very important and necessary as well. Without this, no one can live as well as good nutritive meal increase the productivity as well as the growth of an animal. Thus, the requirement of good cattle feed is always exists and it will further increase with the increase in population of cattle’s. Therefore, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Agro Tech India Ltd. • Amrit Feeds Ltd. • Anirudh Foods Ltd. • Annam Feeds Ltd. • Baramati Agro Ltd. • Gajanan Extraction Ltd. • Goldmohur Foods & Feeds Ltd. • Graintec India Ltd. • Hanuman Minor Oils Ltd. • Hatsun Agro Products Ltd. • Indian Potash Ltd. • Khandesh Extraction Ltd. • Kumar Food Inds. Ltd. • Kwality Feeds Ltd. • Kwality Ltd. • Lakshmi Energy & Foods Ltd. • Maheshwari Solvent Extraction Ltd. • Piccadily Agro Inds. Ltd. • Puri Oil Mills Ltd. • S K M Animal Feeds & Foods (India) Ltd. • Sakthi Beverages Ltd. • Schreiber Dynamix Dairies Ltd. • Sree Tulasi Solvent Extractions Ltd. • Vegepro Foods & Feeds Ltd. • Vimal Dairy Ltd.
Plant capacity: 100 MT/DayPlant & machinery: Rs 277 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 869 Lakhs
Return: 25.22%Break even: 48.23%
Add to Inquiry Add to Inquiry Basket

Aluminium Collapsible Tubes (Printed) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

A collapsible tube is defined as a cylinder of pliable metal that can be sealed in such a manner that its contents, although readily discharged in any desired quantity, are protected from contact with air or moisture. Products so packaged must flow under pressure low enough not to damage the tube. Collapsible tubes are widely used as handy flexible packages for pastes and semi-liquids. As the tube is flattened out to expel its contents, the capacity of the tube is proportionately reduced without the introduction of air and the material in the tube does not suffer any deterioration. These are fabricated readily, and are strong enough to withstand processing, they are light in weight, easy to handle, and fairly cheap. They can be handled on high speed machines. This type of cans are properly sealed after filling the measured quantity, to keep the customer's faith on sealed material sealing also prevents dusting and other bad materials to mix with the product. Collapsible tubes are made from aluminium, tin coated lead, or lead tin alloy by cold extrusion. They consist of three parts, the main tube, a shoulder to one end of which a screened nozzle with orifice is fitted, and a molded cap to close the orifice, sometimes application of various design are attached to the nozzle with the help of mechanical or hand operated filling machines, the end is sealed by folding and crimping. Collapsible tubes were initially introduced for packing artists oil color. However, now its use has spread for packing a wide variety of products. These tubes are used for filling tooth paste, shaving creams, ointment and inks, etc. It is hygienic, non-toxic and non-absorbent and has a high heat transfer rate. Consequently, aluminium is an ideal tubing material for several process industry applications. Aluminium tubes look attractive in its natural state and its appearance can be further enhanced by a variety of finishes. In the packaging sector, aluminium is used in foils, cans, collapsible tubes and bottle caps. Hence, globally, the growth of the packaging industry hinges on growth in sectors like foods, beverages, and medicines. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Perfect Containers Pvt. Ltd. • Oriental Containers Ltd. • P Chhotalal Group • Deep Packaging Pvt. Ltd • Collapsible Tube Corporation • Gulati Extrusions Pvt. Ltd • Almin Extrusion • Patel Extrusion Group
Plant capacity: Aluminium Collapsible Tubes (Printed): 2,00,000 Nos/DayPlant & machinery: Rs 608 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1158 Lakhs
Return: 28.40%Break even: 41.58%
Add to Inquiry Add to Inquiry Basket

Neem Oil - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Azadirachta indica (Neem) tree belongs to the Meliaceae family. It is a multipurpose and an evergreen tree, 12–18 m tall, which can grow in almost all kinds of soil including clay, saline, alkaline, dry, stony, shallow soils and even on solid having high calcareous soil. It is native to India, Pakistan, Sri Lanka, Burma, Malaya, Indonesia, Japan, and the tropical regions of Australia. It thrives well in arid and semi-arid climate with maximum shade temperature as high as 49°C and the rainfall is as low as 250 mm. It can be raised by directly sowing its seed or by transplanting nursery-raised seedlings in monsoon rains. It reaches maximum productivity after 15 years and has a life span of 150–200 years. Planting is usually done at a density of 400 plants per hectare. The productivity of Neem oil mainly varies from 2 to 4 t/ha/yr and a mature Neem tree produces 30–50 kg fruit. The seed of the fruit contains 20–30 wt% oil and kernels contain 40–50% of an acrid green to brown colored oil. Neem is an omnipotent tree and a sacred gift of nature. Neem tree is mainly cultivated in the Indian subcontinent. Neem is a member of the mahogany family, Meliaceae. Today it is known by the botanical name Azadirachta indica (A. indica) A. Juss. Neem has been used extensively by humankind to treat various ailments before the availability of written records which recorded the beginning of history. Since prehistoric times, neem has been used by humankind. The internal medicinal uses of Neem include malaria, tuberculosis, rheumatism, arthritis, jaundice and intestinal worms as well as skin diseases. It also has alternative (increases vitality) properties. The oil is NOT normally taken internally - but as a decoction made from the leaves. The extract of Neem leaves has also demonstrated significant anti-diabetic potential. Neem oil is acried, yellow, bitter in taste and has a disagreeable garlic like odour. It is best used in pharmaceutical and pesticides industry. It is used as antifeedant, repellant, insecticide and growth disruptor. Refined neem oil is used for manufacture of technical oleic acid, stearic acid and production of quality soaps, shampoos, hand and body lotions and creams. It is used to treat skin diseases like scrofula indolent, ulcer, sores and ringworms. Neem is used externally for ringworm, eczema, psoriasis, lice, fungal infection as well as for painful joints and muscles. The cosmetic use of Neem oil includes the fighting of acne and pimples as well as improving skin elasticity. As a whole it is a good project for entrepreneurs to invest. ? Few Indian Major Players are as under • Agro Extracts Ltd. • J S P Oils & Fats Ltd. • K G N Agro Internationals Ltd. • Morinda Overseas Inds. Ltd. • Mother Dairy Food Processing Ltd. • Vrundavan Agro Inds. Ltd.
Plant capacity: Neem Oil : 5 MT/Day, Neem Cake as By Product : 42 MT/DayPlant & machinery: Rs 75 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 320 Lakhs
Return: 24.74%Break even: 62.91%
Add to Inquiry Add to Inquiry Basket

Precipitated Calcium Carbonate - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Sizing Precipitated Calcium Carbonate (PCC)—also known as purified, refined or synthetic calcium carbonate. It has the same chemical formula as other types of calcium carbonate, such as limestone, marble and chalk: CaCO3. The calcium, carbon and oxygen atoms can arrange themselves in three different ways, to form three different calcium carbonate minerals. The most common arrangement for both precipitated and ground calcium carbonates is the hexagonal form known as calcite. Precipitated calcium carbonate (PCC), a manufactured form of calcium carbonate, is made by first hydrating high-calcium quicklime, and then reacting the resulting slurry or "milk-of lime" with carbon dioxide. The resulting product is extremely white and has a uniformly small particle size. It has numerous uses, most notably in the paper industry. With the trend in papermaking toward using the alkaline over the acid process, PCC is being used increasingly as a filler and coating pigment for premium quality paper. The trend is to produce PCC in slurry form at satellite plants located near the paper mills, using commercial quicklime, although it is also produced and sold commercially. PCC is used to enhance the brightness, color, smoothness, and bulk of the paper, replacing more expensive paper pulp. Approximately 75% of worldwide PCC production is used for this purpose. According to GIA, Global market for Calcium Carbonate is projected to reach 94 million tons by 2018, driven by the rising consumption in paper and plastic industries and the growing demand for PCC and GCC in Asia-Pacific, Latin America, and the Middle East. Calcium Carbonate (CaCO3) is an inorganic mineral that finds extensive use as functional and commercial filler in plastic, paper, rubber, coatings, light chemicals, and architectural materials, among others. Growth in the Precipitated Calcium Carbonate (PCC) market would be driven by the increasing number of paper mills and rising demand from plastics sector. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Citurgia Biochemicals Ltd. • Dewan Rubber Inds. Ltd. • Fimakem India Ltd. • Genus Prime Infra Ltd. • Gulshan Polyols Ltd. • Gulshan Sugars & Chemicals Ltd. • Lime Chemicals Ltd. • Niraj Petrochemicals Ltd. • Samana Plastic Ltd. • Searsole Chemicals Ltd. • Shyam Textiles Ltd. • Thirani Chemicals Ltd. • U P Lime-Chem Ltd.
Plant capacity: 25 MT/DayPlant & machinery: Rs 715 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1138 Lakhs
Return: 20.65%Break even: 52.58%
Add to Inquiry Add to Inquiry Basket

Sanitary Napkins (Ultra Thin & Cotton Core Type)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Sanitary Napkin comes under Nonwoven fabrics which as a whole come under technical textile. Technical textiles are defined as textile materials and products used primarily for their technical performance and functional properties rather than their aesthetic or decorative characteristics. Thus Sanitary Napkin comes under Nonwoven fabrics which as a whole come under technical textile. Non woven Fabrics are broadly defined as sheet or web structures bonded together by entangling fibre or filaments (and by perforating films) mechanically, thermally or chemically. They are flat, porous sheets made directly from separate fibres or from molten plastic or plastic film. They are not made by weaving or knitting and do not require converting the fibres to yarn. A sanitary napkin or a sanitary towel is an absorbent item used by a woman while she is menstruating or in any other situation where it is necessary to absorb a flow of blood. It also serves to protect clothing and furnishings.Not only must the sanitary napkin provide comfort and safety, but also enhance every woman's health and lifestyle. Thus, due to demand it is a good project for entrepreneurs to invest. ? Uses Sanitary Napkins are exclusively used by adult girls & Ladies around the world during for maintaining physical aid & to avoid wetting or staining of the clothes. India’s sanitary napkin market has significant profit potential. The demand for such products is stable; purchases are recurring and not subject to normal business cycles. Historically, the price of feminine hygiene products have been relatively expensive, but that is changing as small and large businesses enter the market and make an accessible, lower-priced offering to a wider consumer base. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Carewell Hygiene Products Ltd. • Centron Industrial Alliance Ltd. • Dhanalaxmi Roto Spinners Ltd. • Diapers India Ltd. • Godrej Consumer Products Ltd. • Gufic Biosciences Ltd. • Johnson & Johnson Ltd. • Kimberly Clark Lever Pvt. Ltd. • Mediklin Healthcare Ltd. • Syncom Healthcare Ltd. • Tainwala Personal Care Products Pvt. Ltd.
Plant capacity: Sanitary Napkins Ultra Thin Type: 15000 Pkts/Day, Sanitary Napkins Cotton Core Type: 15000 Pkts/DayPlant & machinery: Rs 345 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 755 Lakhs
Return: 27.92%Break even: 40.85%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 17 of 295 | Total 2944 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 294 295   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top