WhatsApp us
Request a Quote

Project reports in Pharmaceuticals

Moringa Tablets Manufacturing Project Report

Plant cost, machinery, licences and five-year profitability for a moringa tablets unit, with a free sample project report PDF to check before you apply for a loan.

Plant capacity
4,00,000 tablets per day
Total project cost
₹500 lakh
Plant and machinery
₹203 lakh
Return on investment
30% (Year 3)
Break-even
39% of capacity
Payback period
About 3 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a moringa tablets project report?

A moringa tablets project report is a detailed project report (DPR) for a unit that granulates dried Moringa oleifera leaf powder and compresses it into tablets, usually 500 mg each. It sets out the process, machinery, licence route, raw materials, project cost, means of finance, five-year projections, DSCR and break-even that a lender reviews.

Entrepreneurs and contract manufacturers use it to size the plant and raise a term loan; banks use it to judge whether the unit can repay.

Also known as: moringa leaf tablets project report, moringa tablets business plan, DPR for moringa tablet manufacturing, shigru tablets project report.

What a bank looks for in a moringa tablets project report

A credit officer reading a project report on moringa tablets checks whether the cost lines match how a tablet plant really spends money. These four values come from our sample report, with the reason each one gets attention.

37.6%Raw material share of sales

Leaf powder is bought in, not grown, so its price sets your margin. A report that shows a much lower share is usually using last season's powder rate.

80%Leaf powder share of raw material cost

Binders, coating and lubricants are small by comparison. Lenders expect a test of what a rise in powder price does to profit and DSCR (debt service coverage ratio, the cash available to pay each instalment).

9.4%Packing share of sales

HDPE bottles, induction-sealed caps, labels and cartons cost a lot relative to a ₹1.24 tablet. Leaving packing inside raw materials hides this.

60 daysCredit given to buyers

Supplement brands and distributors pay late. In the sample, trade receivables are the largest part of working capital, so the cash credit limit is sized on them.

Values are the assumptions in our illustrative sample. Your report uses figures for your capacity, suppliers and buyers.

Moringa tablets manufacturing plant cost in India

The cost depends on daily output, the licence route and how much of the line is automatic. The large tier below is the plant modelled in our sample report; the two smaller tiers are indicative ranges.

Small unit

₹50–100 lakh

About 50,000–1,00,000 tablets per day, one press

  • Machinery₹30–55 lakh
  • Shed fit-out (or rent)₹10–25 lakh
  • Working capital margin₹8–15 lakh

Fits PMEGP at the lower end, subject to limits

Mid-size unit

₹2–3.5 crore

About 1.5–2.5 lakh tablets per day

  • Machinery₹90–150 lakh
  • Land and building₹70–130 lakh
  • Working capital margin₹25–40 lakh

MSME term loan, often with CGTMSE cover

Our sample report

Large unit

₹500 lakh

4,00,000 tablets per day, 12,00,00,000 tablets per year

  • Plant and machinery₹203 lakh
  • Land and building₹181 lakh
  • Working capital margin₹51 lakh

Term loan ₹375 lakh (75%), promoter ₹125 lakh

Small and mid-size ranges are indicative and exclude land unless stated. An AYUSH unit must pass a GMP inspection of its premises, which can add to building cost.

Moringa tablet plant economics

The sample report models a plant making 4,00,000 tablets a day for 300 days a year. It starts at 60% of capacity and reaches 80% in Year 5, selling at ₹1.24 per tablet ex-factory.

₹500 lakhTotal project cost
₹1,042 lakhSales in Year 3
₹150 lakhNet profit in Year 3
2.21Average DSCR
Cost of project (₹ lakh)
Land and site development27.79
Building and civil works153.70
Plant and machinery202.85
Other fixed assets35.60
Contingencies17.83
Preliminary and pre-operative10.94
Working capital margin51.26
Total499.97
Means of finance (₹ lakh)
Promoter's contribution (25%)124.99
Term loan from bank (75%)374.98
Cash credit limit (separate)153.76
Total project cost499.97

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. Lowest yearly DSCR in the sample is 1.92. All figures are illustrative.

Moringa tablets manufacturing process

Most tablet units buy dried leaf powder rather than drying leaves themselves. Leaf powder is light and fibrous, so it is wet granulated before compression instead of being pressed directly.

  1. Powder testing and sifting

    Each lot of leaf powder is checked for moisture and microbial count, then passed through a vibro sifter to an even mesh size.

  2. Dispensing

    Powder, microcrystalline cellulose and starch are weighed batch by batch in a closed room with dust extraction.

  3. Wet granulation

    A rapid mixer granulator blends the powders with binder solution into dense granules that flow into the press dies.

  4. Drying and sizing

    A fluid bed dryer brings the granules down to low moisture, and a multi mill breaks up lumps.

  5. Lubrication

    Granules are tumbled with a lubricant and glidant in a blender so tablets release cleanly from the punches.

  6. Compression

    A rotary press makes tablets of fixed weight, commonly 500 mg, while operators record weight, hardness and friability.

  7. Film coating

    An auto coater applies a thin film that hides the grassy taste and slows moisture pick-up.

  8. Counting and packing

    Tablets are counted into HDPE bottles, induction sealed, labelled with batch and expiry details and cartoned.

Raw materials for moringa tablets

Leaf powder comes from drying units in moringa-growing belts and its quality varies by season and drying method. Buy on a specification that fixes moisture, microbial limits and mesh size, and keep about 45 days of stock, as the sample does.

Raw materialShare of costYear 3 (₹ lakh)
Moringa oleifera leaf powder80%313.19
Binders and fillers (microcrystalline cellulose, maize starch)11%43.06
Film coating material6%23.49
Lubricants and glidants3%11.75
Total100%391.49

Year 3 costs at 70% utilisation from our illustrative sample. Bottles, caps and labels are costed separately as packing.

Moringa tablet making machine list and cost

MachineWhat it doesSample cost (₹ lakh)
Vibro sifter and multi millScreens powder and sizes dried granules16.23
Rapid mixer granulatorTurns loose powder into dense granules28.40
Fluid bed dryerDries wet granules with warm air26.37
Octagonal or double cone blenderMixes in lubricants evenly12.17
Rotary tablet compression machinePresses granules into tablets48.68
Auto coaterApplies the film coat20.29
Bottle counting, filling and induction sealing lineCounts, fills and seals bottles24.34
Purified water system and dust extractionBinder water and clean air in process rooms14.20
Quality control laboratory instrumentsWeight, hardness, friability, disintegration and moisture tests12.17
Total plant and machinery202.85

Costs are the sample report's estimates for a 4,00,000 tablets per day line. Punches and dies wear and need a running budget. Get current quotations before you finalise.

Who buys moringa tablets from a manufacturer?

Most moringa tablets on Indian shelves and marketplaces carry the name of a wellness or Ayurvedic brand that does not own a tablet line. These brands buy from third-party manufacturers, which gives a new plant steady volume before it builds its own label.

Buyers judge a supplier on batch-to-batch consistency, test reports for each lot and whether the plant holds the licence their label needs.

  • Nutraceutical and wellness brands selling online
  • Ayurvedic and herbal brands on loan licence or contract
  • Pharmacy and health-store distributors
  • Exporters and overseas supplement packers buying bulk tablets
  • Your own brand, once the plant has spare capacity

Why contract work suits a new unit: a brand pays for formulation, label and marketing, while you are paid per thousand tablets. Holding both an FSSAI and an AYUSH licence lets you serve both kinds of brand.

FSSAI or AYUSH licence for moringa tablets?

The same tablet can be sold as a health supplement or as an Ayurvedic medicine. The route you pick decides the licence, the plant layout and what the label may claim.

Business registrationUdyam (MSME) registration and GST registration
Health supplement routeFSSAI licence under the Health Supplements and Nutraceuticals Regulations, 2022 (food category 13.6). Tablets are allowed and must meet Indian Pharmacopoeia quality requirements. Only listed plant parts may be used, and the label may not claim to prevent or cure a disease
Ayurvedic medicine routeManufacturing licence from the state Ayurveda licensing authority: application in Form 24-D under rule 153, licence in Form 25-D, processed through e-AUSHADHI. The products applied for are listed by Schedule T category
GMP for the Ayurvedic routeGMP certificate applied for in Form 24 E-I under rule 153B, valid for five years. The licence application lists the technical staff for manufacture and testing with their qualifications
Making for other brandsAn Ayurvedic brand without its own plant can make in your unit on a loan licence (Form 24-E, rule 153A)
Pollution board consentConsent to establish and operate from the State Pollution Control Board. The Punjab board's Green category list includes "Ayurvedic and homeopathic medicines (without boiler)". Confirm the category with your own state board
Quality standardsLeaf powder and tablets tested against the Indian Pharmacopoeia or the Ayurvedic Pharmacopoeia of India, in your own QC lab or an approved testing lab

Rules checked in October 2026 and differ by state. Confirm current requirements with the licensing authority before you finalise the layout.

Mistakes that weaken a moringa tablets project report

  • Leaving the licence route open

    An AYUSH plant needs a GMP certificate and qualified technical staff; an FSSAI plant needs different labels and claims. A report that skips the choice cannot cost the building or name the buyers.

  • Pricing tablets at retail rates

    A bottle of 60 or 120 tablets sells at many times the ex-factory price per tablet. Using shelf prices makes sales and DSCR look far better than a contract buyer will pay.

  • Assuming direct compression

    Raw leaf powder is fluffy and caps or breaks in the press. Without granulation and drying, the stated tablets per day cannot be reached.

  • No allowance for rejected powder lots

    Powder that fails moisture or microbial tests has to be returned or reprocessed. Stock days and supplier terms should cover a failed lot.

  • Under-sizing working capital

    Brands often pay at 60 days while bottles and powder are paid sooner. Skipping debtor days leaves the cash credit limit short in Year 1.

How NPCS helps you set up a moringa tablets unit

  • Licence route and product mixWeigh the FSSAI and AYUSH routes, tablet strength and pack sizes against your target buyers.
  • Machinery and line sizingMatch press size, granulator and dryer capacity to daily output, and compare supplier quotations.
  • Bank-ready project reportProjections, DSCR, working capital and sensitivity to leaf powder price in your lender's format.
  • Layout and approvalsA plant layout planned for an AYUSH GMP inspection or FSSAI hygiene needs, plus the approvals list for your state.

NPCS's client list records 67 pharmaceutical assignments, including one for moringa tablets, and the NPCS project team has prepared project reports for entrepreneurs, banks and companies since 1994.

What's inside the moringa tablets sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

19 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS moringa tablets project reports

These are moringa tablets project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Moringa Leaf TabletsMoringa Leaf Tablets (120 Tablets each Bottle): 500 Bottles / Day₹1.06 crore30%70% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Moringa Tablets project report: frequently asked questions

How much does it cost to set up a moringa tablets manufacturing plant in India?

A small unit making 50,000 to 1,00,000 tablets a day needs roughly ₹50–100 lakh, and a mid-size unit about ₹2–3.5 crore. Our sample report models a 4,00,000 tablets per day plant at ₹500 lakh including land, building and working capital margin. These ranges are indicative; your report works out the cost for your capacity, licence route and location.

Do moringa tablets need an FSSAI licence or an AYUSH licence?

It depends on how the tablets are sold. Sold as a health supplement, they need an FSSAI licence and must follow the Nutraceuticals Regulations 2022, with no disease claims. Sold as an Ayurvedic medicine, they need a manufacturing licence from the state Ayurveda licensing authority under rule 153 and a GMP certificate for the plant. Decide the route before you design the plant.

Which machines are used to make moringa tablets?

The core line is a vibro sifter and multi mill, a rapid mixer granulator, a fluid bed dryer, a blender, a rotary tablet press and an auto coater. You also need a bottle counting and sealing line, a purified water system and a QC lab. In our sample report the rotary press is the largest single machine cost at ₹48.68 lakh.

Is a moringa tablets business profitable?

In our illustrative sample, a 4,00,000 tablets per day unit earns a 30% return on investment in Year 3. It breaks even at 39% of capacity and pays back in about 3 years. Real results depend on the price of leaf powder, the ex-factory rate agreed with brands, credit days and how fully the press is booked.

Can I get a PMEGP loan for a moringa tablet unit?

A small unit can apply if its cost fits the scheme. PMEGP gives loans up to ₹50 lakh for manufacturing projects, with a margin-money subsidy of 15–35% depending on category and location. Larger units usually take an MSME term loan, often with CGTMSE guarantee cover. Every lender asks for a project report with projections and DSCR.

Moringa tablet ka business kaise shuru kare?

Start by choosing the licence route, FSSAI health supplement or AYUSH Ayurvedic medicine, because it decides the plant layout, labels and buyers. Then fix capacity, line up a tested leaf powder supplier, get machinery quotations and prepare a project report for the bank. Many first units begin with contract manufacturing for supplement brands before launching their own brand.

Is the moringa tablets project report PDF free, and can I use it for a loan?

The sample is free to view and download. It shows the format and depth of an NPCS report. Its figures are illustrative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and licence route.

Sources and references

  1. FAQs on the Food Safety and Standards (Health Supplements, Nutraceuticals and other foods) RegulationsFood Safety and Standards Authority of India, checked Oct 2026
  2. Food Safety and Standards (Health Supplements, Nutraceuticals, Food for Special Dietary Use, Food for Special Medical Purpose and Prebiotic and Probiotic Food) Regulations, 2022Food Safety and Standards Authority of India, checked Oct 2026
  3. Drug Control Cell: licences for Ayurvedic, Unani and Siddha drug manufactureDepartment of AYUSH, Government of NCT of Delhi, checked Oct 2026
  4. Form 25-D manufacturing licence and GMP certificate checklistState Licensing Authority (Indian Medicine), Government of Tamil Nadu, checked Oct 2026
  5. Green category industries (CPCB categorisation)Punjab Pollution Control Board, checked Oct 2026
  6. Prime Minister's Employment Generation Programme (PMEGP)Industrial Co-operative Development and Investment Corporation, Government of Tamil Nadu, checked Oct 2026
  7. Credit Guarantee Scheme for Micro and Small Enterprises (CGTMSE)Directorate of Industries, Trade and Commerce, Government of Goa, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different pharmaceuticals project?

These are a few of the projects we advise on. NPCS's published client list records 67 pharmaceuticals assignments, so tell us what you are planning.

Tell us your project

Recent pharmaceuticals assignments

  • Wanaya Parmaceuticals Pvt Ltd
    Industrial Project Report on IV FluidZimbabwe, 2026
  • TSV Pharmaceutical and Marketing
    Techno-Economic Project Report on IV Fluid manufacturing project report with sterile packaChhattisgarh, 2025
  • Convalex India Private Limited
    Bankable Project Report on IV Fluid production using Blow-Fill-Seal (BFS) technologyDelhi, 2025
  • Precision Healthcare
    Techno-Economic Project Report on IV FluidSinghbhum, 2025
  • Laxyan Pharma LLP
    Bankable Project Report on Producing ferric pyrophosphate for pharmaceutical applicationsBharuch,, 2024
  • Dibia Systems GmbH
    Project Planning and Feasibility Report on Market research and technical feasibility for ISwitzerland, 2024
  • Global Aluminium Pvt. Ltd
    Techno-Economic Project Report on Active Pharmaceutical IngredientsHyderbad, 2023
  • CHRIS-EJIK Pharmaceuticals & Health Care Products Ltd
    Techno-Economic Project Study on ParacetamolNigeria, 2023

Get a moringa tablets project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Moringa Tablets Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free moringa tablets sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Moringa Tablets sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp