Google Search
Search
Already a Member ?
Transparent Lpg Cylinder From Fiber Glass | |
| A gas cylinder is a pressure vessel for storage and containment of gases at above atmospheric pressure. High-pressure gas cylinders are also called bottles. Inside the cylinder the stored contents may be in a state of compressed gas, vapor over liquid, supercritical fluid, or dissolved in a substrate material, depending on the physical characteristics of the contents. A typical gas cylinder design is elongated, standing upright on a flattened bottom end, with the valve and fitting at the top for connecting to the receiving apparatus. A seamless composite translucent cylinder made up from a polyethylene, moulded inner lining, glass fibres and resin with inner liner to create an even greater strength and an outer layer makes this a perfect one to use. Due to the superior performance of composite LPG cylinder, the steel LPG cylinder must be replaced by composite LPG cylinder gradually. And with the development of technology, there will be better materials to be developed. Indian LPG imports have been registering some remarkable trends in the last 10 years. The growth trends over the last 10 years, 5 years and 1 year are: 17% CAGR (FY07 to FY17), 14% CAGR (FY12 to FY17) and 23%. At nearly 11 million tonnes in FY17, India surpassed Japan’s imports at 10.6 million tonnes. The government has gone full throttle in promoting LPG as a reliable fuel through schemes such as Pahal, Ujjwala, Direct Benefit Transfer and 'Give it Up' which led to increased adoption of LPG in residential segment. While 'Pahal' got enlisted under Guinness Book of World Record for its largest cash transfer at a whopping USD 6.5 billion. All the same, under the Ujjwala scheme free LPG connections will be provided to 5 crore poor households. A rapid increase in urban population combined with increasing LPG penetration in rural areas has resulted in a 10% growth in LPG consumption, making India the second largest LPG consumer in the World at 19 million tonne per year. Based on Government's continued efforts to promote clean fuel and increased adoption by consumers, LPG consumption is expected to see a sustained double-digit growth in the years to come. Global composite cylinders market stood at $ 601 million in 2018 and is projected to reach $ 921 million by 2024, exhibiting a CAGR of over 7% during 2019-2024, owing to increasing demand for explosion proof, non-corrosive and lightweight LPG cylinders. Composite cylinder is a high-pressure vessel that is made of a composite-polymer material and placed in a plastic body. The technology of manufacturing a modern composite cylinder is a very complex and high-tech process, thus its cost is much higher than the cost of a metal analogue. Increasing consumption of LPG in the developing countries is expected to boost the demand. Increasing demand for lightweight, explosion proof and non-corrosive LPG cylinders and government push towards the usage of composite cylinders are some of the major drivers of the market. Increase in the consumption of LPG in the developing economies further elevate the demand for composite LPG cylinders over the next five years. As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under Everest Kanto Cylinder Ltd Hindustan Petroleum Corpn. Ltd Supreme Cylinders Ltd. Time Technoplast Ltd. | |
| Plant capacity: Transparent LPG Cylinder: 2,243.6 Nos. / Day | Plant & machinery: Rs 28274 lakhs |
| Working capital: - | T.C.I: Cost of Project: Rs 32012 lakhs |
| Return: 25.00% | Break even: 27.00% |
Email Us |
 Add to Inquiry Basket | |
We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.
Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.
Information- One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
- One Crore is equivalent to ten million (10,000,000)
- T.C.I is Total Capital Investment
- We can modify the project capacity and project cost as per your requirement.
- We can also prepare project report on any subject as per your requirement.
- Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.
About NIIR PROJECT CONSULTANCY SERVICES | Hide  |
NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.
Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.
NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.
Copyright © 2003-2021 NPCS.
