What is a copper wire drawing enamelling project report?
A copper wire drawing enamelling project report is a detailed project report (DPR) for a plant that draws 8 mm copper rod to winding gauges and coats it with enamel. It sets out the process, machinery, copper and enamel needs, project cost, finance, five-year projections, DSCR and break-even that a lender reviews.
Promoters use it to size the plant and raise a term loan; banks and investors use it to check whether the conversion margin can service the debt.
Also known as: enamelled copper wire project report, winding wire manufacturing project report, copper wire drawing enamelling business plan, project report on copper wire drawing enamelling.
Copper wire drawing enamelling plant cost in India
Our sample report models a plant that draws and enamels 830 kg of copper wire a day, or 2,73,900 kg a year at full capacity over 330 working days. It starts at 60% capacity, reaches 80% in Year 5 and sells mixed gauges at ₹1,680 per kg, ex-GST.
| Land and site development | 46.08 |
|---|---|
| Building and civil works | 148.66 |
| Plant and machinery | 295.37 |
| Other fixed assets | 25.05 |
| Contingencies | 22.20 |
| Preliminary and pre-operative | 13.43 |
| Working capital margin | 88.52 |
| Total | 639.31 |
| Promoter's contribution (25%) | 159.83 |
|---|---|
| Term loan from bank (75%) | 479.48 |
| Cash credit limit (separate) | 265.56 |
| Total project cost | 639.31 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
Copper wire drawing enamelling manufacturing process
The plant turns 8 mm copper rod into insulated winding wire in seven stages. Drawing and enamelling are separate lines, so a stock of bare wire between them keeps the ovens running when a drawing machine stops.
- Rod breakdown
A multi-die rod breakdown machine reduces the 8 mm rod to an intermediate size of about 1 to 2.5 mm, cooled by soluble oil emulsion.
- Fine drawing
Intermediate and fine drawing machines pull the wire through carbide or diamond dies to the exact bare diameter the customer has ordered.
- Inline annealing
Drawing hardens copper, so the wire passes through a steam or inert gas tube at the start of the enamelling line to recover softness and elongation.
- Enamel coating
The wire takes several thin coats of liquid enamel through dies or felts, because many thin coats give fewer pinholes than one thick coat.
- Curing
After each coat the wire passes through the oven to drive off solvent and cure the resin. A catalytic converter burns the solvent vapour and feeds heat back to the oven.
- Testing
Samples from each spool are tested for diameter, elongation, breakdown voltage, pinholes and heat shock against the IS 13730 series.
- Spooling and packing
Wire is wound on plastic spools by gauge and grade, labelled with the lot number and packed in cartons.
Which plant route and enamelling machine should you choose?
The biggest decision is how far back you start: from bare wire, from copper rod or from cathode. The gauge range you plan to sell then decides the type of enamelling machine.
| Enamelling only | Buys bare drawn wire and only coats it. Lowest machinery cost, but you pay another unit's drawing charge and depend on its gauge accuracy and surface finish. |
|---|---|
| Drawing and enamelling | Starts from BIS-marked 8 mm rod and controls drawing, annealing and coating in one plant. This is the route our sample report models. |
| Rod casting, drawing and enamelling | Adds a casting line that makes rod from cathode or clean scrap. It suits large plants with assured cathode supply and needs far more capital and power. |
| Horizontal enamelling machines | Generally used for fine and medium gauges, with many wires running side by side through a long oven. |
| Vertical enamelling machines | Generally used for heavier gauges, where the wire's own weight makes a vertical pass easier to control. |
| Enamel system | Polyester-imide base coats with a polyamide-imide overcoat are common for motors that run hot; solderable polyurethane enamels suit small coils that are soldered without stripping. |
Line speed and oven capacity vary by machine make. Confirm them with suppliers for your gauge mix.
Raw materials for enamelled copper wire
Copper rod is almost the whole raw material bill, so a plant's margin depends on how it buys and prices copper. The Copper Products Quality Control Order covers copper wire rods for electrical applications (IS 12444), so buy BIS-marked electrolytic rod.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Electrolytic copper wire rod 8 mm | 95% | 2,162.87 |
| Wire enamels and overcoat | 4% | 91.07 |
| Drawing lubricants and solvents | 1% | 22.77 |
| Total | 100% | 2,276.71 |
Machinery for a wire drawing and enamelling plant
The enamelling machines are the largest item, at 40% of the machinery cost in our sample. The fume incinerator and test laboratory are small items, but a plant cannot get consent or buyer approval without them.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Rod breakdown machine with inline annealer | Draws 8 mm rod to intermediate size | 53.17 |
| Intermediate and fine wire drawing machines | Draw wire to the final bare gauge | 41.35 |
| Horizontal enamelling machines with inline annealing | Anneal, coat and cure the wire | 118.15 |
| Catalytic fume incineration system | Burns solvent vapour from the ovens | 17.72 |
| Die polishing and maintenance equipment | Keeps drawing dies to size | 11.82 |
| Winding wire testing laboratory | Breakdown voltage, pinhole and elongation tests | 17.72 |
| Rewinding and spooling machines | Wind finished wire on spools by gauge | 17.72 |
| Compressor, chiller and electrical panels | Air, cooling water and power distribution | 17.72 |
| Total plant and machinery | 295.37 | |
Costs are the sample report's estimates for an 830 kg per day plant. Get current quotations before you finalise.
Licences and standards for a winding wire plant
| Business registration | Udyam (MSME) registration and GST registration |
|---|---|
| Raw material standard | Copper wire rod for electrical use must carry the BIS Standard Mark (IS 12444) under the Copper Products Quality Control Order |
| Product standard | The IS 13730 series covers winding wires; IS 13730 (Part 0/Sec 1): 2018 sets general requirements for enamelled round copper wire |
| Pollution board consent | Consent to establish and operate from the State Pollution Control Board. Odisha lists wire drawing in its Orange category; the board will also ask how oven solvent fumes are treated |
| Factory licence | Registration under the Factories Act or the state's labour law where worker and power thresholds apply |
| Fire safety NOC | Needed where the plant stores enamels and solvents in quantity; rules vary by state |
Pollution categories and licence rules differ by state. Confirm them with your state board and BIS before you apply.
Who buys enamelled copper winding wire?
Every motor, transformer, fan and pump has a coil of enamelled wire inside, so demand follows electrical equipment, appliance and power distribution spending. Large buyers approve a new supplier only after trial lots pass their tests. So a new plant usually starts with rewinders and dealers, then adds orders from OEMs (original equipment makers).
- Motor and pump manufacturers
- Distribution and power transformer makers
- Fan and household appliance makers
- Electrical dealers and rewinding workshops
- Makers of chokes, relays and ballasts
Sell the conversion, not the copper: buyers price winding wire as the day's copper cost plus a conversion charge per kg. Quote that way and buy rod against confirmed orders, so a fall in copper prices does not wipe out the margin on stock you already hold.
Mistakes that weaken a copper wire drawing enamelling project report
- Treating copper as a fixed price
Copper moves every day. The report should show margin as conversion per kg and test how a copper price swing changes working capital and profit.
- Under-sizing working capital
In our sample, the Year 1 working capital need of ₹354.08 lakh is larger than the plant and machinery cost, and buyer credit is the biggest part of it.
- Ignoring yield and scrap
Wire breaks, start-up lengths and rejected spools are sold back as scrap below rod price; saleable output must allow for this loss.
- Leaving out fume treatment
Enamel solvents have to be burnt. A cost estimate without a catalytic incinerator understates capital and puts pollution consent at risk.
- Booking OEM sales from month one
Motor and transformer makers take time to approve a vendor. Early-year sales should rely on dealers and rewinders at lower conversion rates.
How NPCS helps you set up a copper wire drawing and enamelling plant
- Plant route and gauge mixDecide between enamelling only and full drawing and enamelling, and the gauges and thermal classes to sell.
- Machinery and line sizingMatch drawing and enamelling machine capacity, oven lines and fume treatment to your output.
- Bank-ready project reportProjections, copper-linked working capital and DSCR in the format your lender wants.
- Approvals and layoutPlant layout, power load, BIS rod sourcing and the approvals list for your state.
NPCS's client list records 116 assignments in metal products, including one for this product. The NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports since 1994.
What's inside the copper wire drawing enamelling sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
18 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS copper wire drawing enamelling project reports
These are copper wire drawing enamelling project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Copper Wire Drawing, Annealing & Enamelling | 1 MT / day | ₹2.09 crore | 47% | 34% | Get this report |
| Copper ROD Casting, Wire Drawing AND Enamelling | 6300 MT/Annum | ₹11.26 crore | 45% | 53% | Get this report |
| Copper Wire Drawing & Enamelling | Copper Wire (0.914 to 0.376 mm), 350 Kgs per day Enamelled Copper Wire (0.914 to 0.376 mm), 350 Kgs per day Intermediate Copper Wire (2.5 mm… | ₹12.33 crore | 28% | 46% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Copper Wire Drawing Enamelling project report: frequently asked questions
What is the cost of a copper wire drawing enamelling plant in India?
Our sample report models an 830 kg per day plant at ₹639 lakh, including ₹295 lakh of plant and machinery and ₹88.52 lakh of working capital margin. An enamelling-only unit that buys bare wire needs less machinery but still ties up heavy working capital in copper. Your own report works out the cost for your gauge mix, capacity and location.
What is the manufacturing process for enamelled copper wire?
The 8 mm copper rod is drawn to an intermediate size on a rod breakdown machine, then drawn to the final gauge. The wire is annealed in line, coated with several thin layers of enamel and baked after each coat. Finished wire is tested for breakdown voltage, pinholes and elongation, then wound on spools by gauge.
Is copper wire drawing and enamelling profitable?
In our illustrative sample, the plant earns a 25% return on investment in Year 3, breaks even at 46% of capacity and pays back in about 3.4 years. Real profit depends on the conversion charge you can get over copper, scrap and yield losses, power cost and how many days of credit your buyers expect.
Which raw materials are needed for enamelled copper wire?
Electrolytic copper wire rod of 8 mm is the main input, about 95% of raw material cost in our sample report. Wire enamels and overcoat make up about 4%, and drawing lubricants and solvents the remaining 1%. Copper wire rod for electrical use falls under the Copper Products Quality Control Order, so buy BIS-marked rod.
Do I need BIS certification for a winding wire unit?
The Copper Products Quality Control Order makes the BIS Standard Mark compulsory for copper wire rods for electrical applications (IS 12444), so your raw material must carry it. Enamelled round copper winding wire is specified in the IS 13730 series. Check the current BIS list before launch, since quality control orders are revised from time to time.
Can I get a PMEGP loan for a copper wire enamelling unit?
PMEGP covers manufacturing projects up to ₹50 lakh, so a full drawing and enamelling plant like our sample is usually outside it. Most promoters take a bank term loan for fixed assets and a cash credit limit for copper stock and debtors. Lenders ask for a project report with projections, working capital and DSCR before they sanction.
Is the sample report free and can I use it for a bank loan?
Yes, the sample is free to view and download as a PDF. It shows the format and depth of an NPCS report. Its figures are illustrative and not taken from a real project, so do not submit it to a bank. For a loan, NPCS prepares a report for your capacity, location and lender.
Sources and references
- IS 13730 (Part 0/Sec 1): 2018, winding wires: general requirements, enamelled round copper wireBureau of Indian Standards, checked Oct 2026
- Copper Products (Quality Control) Order, 2023, S.O. 4595(E)Department for Promotion of Industry and Internal Trade, Gazette of India, checked Oct 2026
- List of Orange category industriesState Pollution Control Board, Odisha, checked Oct 2026
- Prime Minister's Employment Generation Programme (PMEGP) guideDistrict Industries Centre, Ganjam, Government of Odisha, checked Oct 2026
