WhatsApp us
Request a Quote

Project reports in Metal Products

Gold Salt Plant Project Report

Plant cost, process, machinery and five-year profitability for a gold salt (gold potassium cyanide) unit, with a free sample project report PDF you can open now.

Plant capacity
160 grams per day
Total project cost
₹420 lakh
Plant and machinery
₹200 lakh
Return on investment
32% (Year 3)
Break-even
31% of capacity
Payback period
About 2.8 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a gold salt project report?

A gold salt project report is a detailed project report (DPR) for a plant that converts fine gold into gold potassium cyanide, the white crystalline salt that feeds gold plating baths. It covers the process, machinery, raw materials, licences, project cost, means of finance, five-year projections, DSCR and break-even that a lender checks before funding the plant.

Chemical entrepreneurs, bullion refiners and plating chemical suppliers use it to size the plant and raise a term loan; banks use it to judge whether the unit can repay.

Also known as: project report on gold salt, gold potassium cyanide project report, gold plating salt plant report, gold salt business plan.

Gold salt manufacturing plant cost in India: sample economics

Gold salt is an unusual project: the plant is small and fairly cheap, but almost every rupee of sales is gold. Our sample report models a 160 grams per day plant running 330 days a year. It starts at 60% capacity, reaches 80% in Year 5 and sells gold salt at ₹10,900 per gram.

Because gold changes hands so quickly, the project cost is modest next to sales. The fixed assets are the cells, crystalliser, effluent plant, assay lab and strong room; the gold itself is financed through working capital.

₹420 lakhTotal project cost
₹4,029 lakhSales in Year 3
₹135 lakhNet profit in Year 3
2.32Average DSCR
Cost of project (₹ lakh)
Land and site development42.68
Building and civil works93.49
Plant and machinery200.11
Other fixed assets19.75
Contingencies14.68
Preliminary and pre-operative9.27
Working capital margin40.52
Total420.50
Means of finance (₹ lakh)
Promoter's contribution (25%)105.12
Term loan from bank (75%)315.38
Cash credit limit (separate)121.56
Total project cost420.50

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments; lowest yearly DSCR 2.02. All figures are illustrative.

Gold salt manufacturing process

The sample plant uses the membrane electrolysis route, which goes from gold bar to finished salt in a closed circuit. Every step is weighed and logged, because the plant must account for gold to the milligram.

  1. Gold receipt and assay

    Fine gold bars of 999.9 purity are weighed, assayed and logged into the strong room before any metal is issued to production.

  2. Electrolytic dissolution

    Gold anodes dissolve in a membrane cell, where a membrane keeps the gold solution apart from the cathode so gold does not plate back out.

  3. Filtration

    The gold solution is filtered to remove insoluble matter and traces of other metals that would spoil plating quality.

  4. Crystallisation

    The solution is concentrated in an evaporator and cooled so that gold potassium cyanide crystallises out.

  5. Drying

    Crystals are separated and dried under vacuum at low temperature to a free-flowing white powder.

  6. Assay and packing

    Each lot is tested for gold content, usually close to 68.3%, and packed in sealed, labelled bottles with a lot certificate.

  7. Gold recovery and effluent treatment

    Mother liquor, rinse water and filter residues go through gold recovery, then cyanide destruction, before any water leaves the plant.

Which process route suits a gold salt plant?

Two routes are used. The choice shapes the machinery list, the effluent load and how easily the plant clears safety and pollution inspections.

Point of comparisonMembrane electrolysisChemical route through gold chloride
Starting pointFine gold anodes dissolved directly into the cyanide electrolyteGold dissolved in aqua regia, then converted to the cyanide salt in several steps
Main hazardsCyanide handling and electrical safetyAcid and nitrogen oxide fumes, plus intermediate gold compounds that are unstable when dry
EffluentSmaller volume, mostly cyanide-bearing rinse waterAcid and cyanide streams that must be kept apart and treated separately
Product purityHigh and steady, suited to electronics platingDepends on careful washing between steps
SuitsNew plants and buyers who need consistent lotsRefiners who already run aqua regia lines

Raw materials for gold salt

Fine gold is the business. In our sample it is 97% of raw material cost, and raw materials take 90.9% of sales. Potassium cyanide and process chemicals are small in value but drive most of the safety and licensing work.

Raw material cost in Year 3 of the sample report
Raw materialShare of costYear 3 (₹ lakh)
Fine gold bar 999.997%3,552.80
Potassium cyanide2%73.25
Potassium hydroxide and process chemicals1%36.63
Total100%3,662.68

The sample assumes only 3 days of raw material stock and no supplier credit, because gold is bought against payment.

Machinery for a gold salt plant

The membrane electrolysis cell is the largest single item. Note how much of the list is about control rather than production: the effluent plant, assay lab and strong room together cost more than the cell.

MachineWhat it doesSample cost (₹ lakh)
Membrane electrolysis cell with rectifierDissolves gold into solution48.03
Evaporator and crystalliserConcentrates the solution and grows crystals28.01
Cyanide destruction and effluent treatment plantTreats cyanide-bearing water before discharge28.01
Assay laboratory with XRF analyserChecks gold content of inputs and every lot24.01
Fume extraction and alkaline scrubberCaptures fumes from the process area20.01
Vacuum dryerDries crystals at low temperature16.01
Strong room and security systemStores gold and finished salt safely16.01
Deionised water plantSupplies pure water for the process10.01
Precision balances and packing equipmentWeighs and seals each bottle10.01
Total plant and machinery200.11

Costs are the sample report's estimates for a 160 grams per day plant. Get current quotations before you finalise.

Licences and approvals for a gold salt plant

Cyanide puts this product in the strictest bracket of approvals. Start the pollution and hazardous chemical paperwork before you order machinery, as site approval comes first.

Pollution board consentConsent to establish and operate from the State Pollution Control Board. Hydrocyanic acid and its derivatives appear in the red category list, so expect red category conditions; confirm with your state board
Hazardous chemicalsPotassium cyanide is listed in Schedule 1 of the Manufacture, Storage and Import of Hazardous Chemical Rules, 1989. Duties include safety data sheets, labelling of every container and reporting any major accident
Hazardous wasteAuthorisation from the State Pollution Control Board under the Hazardous and Other Wastes Rules, 2016, applied for in Form 1 and valid for five years, for cyanide-bearing sludge and residues
Poisons licenceState rules under the Poisons Act, 1919 can require a licence from the District Magistrate to possess or sell scheduled poisons; check whether your state's schedule covers cyanides
Factory and fireFactory licence where the worker threshold applies, and a fire NOC; rules vary by state
Business registrationUdyam (MSME) registration and GST registration

Who buys gold salt in India?

Demand comes from electroplaters. Connector, relay and circuit board makers need hard, thin gold layers for contacts; the imitation jewellery, watch and pooja article trades want a bright decorative finish. Buyers order in small, frequent lots and judge a supplier on gold content, purity and delivery.

Many plants run two models side by side: selling salt made from their own gold, and converting gold that a plater supplies for a per-gram charge. Conversion work needs far less working capital, so a report should show both.

  • Electronics and connector plating shops
  • Printed circuit board manufacturers
  • Imitation and fashion jewellery platers
  • Watch, pen and accessory component platers
  • Plating chemical distributors

Why assay certificates win repeat orders: platers work out bath additions from the stated gold content. A lot that is short on gold shows up as thin plating and rejected parts, and the buyer rarely comes back.

Mistakes that weaken a gold salt project report

  • A fixed selling price with no link to gold

    Gold salt is priced off the gold rate plus a conversion premium. Projections should show the premium per gram and test a fall in gold price on stock in hand.

  • Ignoring gold held in the circuit

    Gold sits in cells, liquors and filters at all times. The sample carries 5 days of work in progress; leaving it out understates working capital.

  • Treating effluent as an extra

    Cyanide destruction and gold recovery are central to consent. In the sample the effluent plant costs as much as the crystalliser.

  • Long credit to platers

    Each day of credit locks up gold value. The sample allows 7 days; dealer-style 45 days would multiply the cash credit need.

  • No budget for security and insurance

    A strong room, CCTV, gold-in-transit cover and stock insurance are lender requirements, not options.

How NPCS helps you set up a gold salt plant

  • Capacity and business modelSize the plant and balance own-gold sales against conversion work.
  • Process and equipmentCompare electrolytic and chemical routes and line up machinery quotations.
  • Bank-ready project reportGold-linked projections, working capital, DSCR and break-even in your lender's format.
  • Approvals and layoutRed category consent, hazardous chemical and waste compliance, and a safe plant layout.

NPCS, led by founder Ajay Kumar Gupta, has prepared project reports and feasibility studies since 1994; its client list shows 116 assignments in metal products alone.

What's inside the gold salt sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

19 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Find NPCS project reports in your budget

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Gold Salt project report: frequently asked questions

What is the cost of a gold salt manufacturing plant in India?

Our sample report models a 160 grams per day plant at a total project cost of ₹420.50 lakh, with ₹200.11 lakh in plant and machinery. The gold itself is bought out of working capital, mostly funded by a ₹121.56 lakh cash credit limit. Your own cost depends on capacity, whether you buy gold or convert customer gold, and the effluent and security set-up your state requires.

Is gold salt the same as gold potassium cyanide?

Yes. In the plating trade, gold salt almost always means gold potassium cyanide, also called potassium gold cyanide, potassium dicyanoaurate, GPC or PGC. It is a white crystalline powder with about 68% gold by weight. Platers dissolve it to make or top up gold plating baths for electronics, jewellery and watch parts.

How much gold is needed to make 1 kg of gold salt?

About 683 grams of fine gold go into each kilogram of gold potassium cyanide, because the salt is roughly 68.3% gold. Process losses are small but real, so plants recover gold from mother liquor, rinse water and filters. In our sample, fine gold makes up 97% of raw material cost, and raw materials take 90.9% of sales.

Is gold salt manufacturing profitable?

It can be, but the margin is a thin conversion charge on a very costly input. In our illustrative sample, the plant earns a 32% return on investment in Year 3, breaks even at 31% of capacity and pays back in about 2.8 years. Real results depend on the premium you charge over gold value, gold losses and how fast gold turns over.

Which licences are needed to make gold salt?

You need consent to establish and operate from the State Pollution Control Board and a hazardous waste authorisation for cyanide-bearing residues. The plant must also follow the Manufacture, Storage and Import of Hazardous Chemical Rules, which list potassium cyanide. Some states also need a poisons licence for cyanide. Udyam, GST, a factory licence and fire NOC complete the basic list.

Is the gold salt for rheumatoid arthritis the same product?

No. Medical gold salts such as sodium aurothiomalate are thiolate compounds once injected for rheumatoid arthritis and are now rarely used. They are pharmaceutical products and a different project altogether. This page and our sample cover gold potassium cyanide, the plating salt that industrial buyers mean when they ask for gold salt.

Is the sample gold salt project report PDF free and can I use it for a loan?

The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so do not submit it to a bank. For a loan, NPCS prepares a report for your own capacity, location, gold sourcing model and lender.

Sources and references

  1. The Manufacture, Storage and Import of Hazardous Chemical Rules, 1989Punjab Pollution Control Board (rules notified by the Ministry of Environment and Forests), checked Oct 2026
  2. List of red category of industriesPunjab Pollution Control Board, checked Oct 2026
  3. Hazardous and Other Wastes (Management and Transboundary Movement) Rules, 2016Urban Development Department, Government of Tripura, checked Oct 2026
  4. Poisons Act, 1919Ministry of Home Affairs, Government of India, checked Oct 2026
  5. Credit Guarantee Fund Trust for Micro and Small EnterprisesCGTMSE, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different metal products project?

These are a few of the projects we advise on. NPCS's published client list records 116 metal products assignments, so tell us what you are planning.

Tell us your project

Recent metal products assignments

  • Long Island Trading Co. Pvt. Ltd
    Project Report on Aluminium Can Manufacturing Plant SetupIndore, 2026
  • Allotrope Engineers
    Bankable Project Report on Gas Atomized Aluminium PowderHyderabad, 2026
  • P M Infrastructure Private Limited
    Comprehensive Market Research Report on TMT BarsBangalore, 2026
  • Arham Recycling Private Limited
    Pre-Feasibility Report on Copper Wire RecyclingFaridabad, 2026
  • Bihar Foundry & Castings Limited
    Industrial Project Report on Electrolytic Manganese MetalRanchi, 2026
  • Rgcon Itm
    Comprehensive Project Report on Copper CathodeVisakhapatnam, 2026
  • Krishnay Recycling Pvt Ltd
    Pre-Feasibility Report on Project Planning and Feasibility Report on Copper Cathode and CoSouth Africa, 2026
  • Goodluck India Ltd
    Techno-Economic Project Report on Inner Grooved Copper TubesSikandrabad, 2025

Get a gold salt project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Gold Salt Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free gold salt sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Gold Salt sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp