What is a cast iron and sg iron castings project report?
A cast iron and SG iron castings project report is a detailed project report (DPR) for a foundry that melts pig iron and steel scrap and pours grey iron and spheroidal graphite (ductile) iron castings to buyers' drawings. It sets out the process, furnace and moulding line, raw materials, project cost, finance, five-year projections, DSCR and break-even.
Promoters use it to size the foundry and raise a term loan; banks use it to judge whether the plant can carry the debt.
Also known as: ductile iron castings, spheroidal graphite iron castings, grey iron castings.
Cast iron and SG iron castings plant cost in India
Our sample report models a 12 metric tonnes per day (MT per day) foundry pouring a mix of grey and SG iron for 330 days a year, or 3,960 MT per year at full capacity. It starts at 60% utilisation and reaches 80% in Year 5, with a blended selling price of ₹1,08,000 per MT.
| Land and site development | 142.25 |
|---|---|
| Building and civil works | 336.60 |
| Plant and machinery | 631.39 |
| Other fixed assets | 72.11 |
| Contingencies | 48.40 |
| Preliminary and pre-operative | 30.77 |
| Working capital margin | 105.66 |
| Total | 1,367.18 |
| Promoter's contribution (25%) | 341.80 |
|---|---|
| Term loan from bank (75%) | 1,025.38 |
| Cash credit limit (separate) | 316.96 |
| Total project cost | 1,367.18 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. DSCR (cash available to repay the loan divided by instalments due) is lowest at 1.29 in Year 2. All figures are illustrative.
Cast iron and SG iron castings manufacturing process
Grey and SG iron share the same moulding and finishing line. The difference sits in the ladle: SG iron gets a magnesium treatment that changes the shape of the graphite.
- Pattern and core making
Wood, aluminium or resin patterns are made to the buyer's drawing, and resin-bonded sand cores are shot for internal passages such as pump volutes.
- Moulding
Green sand of silica, bentonite and coal dust is rammed around the pattern in flasks on jolt squeeze machines, and the cores are set before closing.
- Melting
Pig iron, steel scrap and foundry returns are melted in an induction furnace, and a spectrometer sample sets carbon, silicon, sulphur and manganese before tapping.
- Nodularising and inoculation
For SG iron, low-sulphur metal is tapped onto ferro silicon magnesium in a sandwich or tundish ladle, then inoculated with ferro silicon so graphite forms round nodules.
- Pouring
Treated metal is poured within minutes because the magnesium effect fades; late pours give flake graphite and the casting fails the SG grade.
- Knockout and fettling
Moulds are shaken out, sand goes back to the sand plant, runners and risers are cut off, and castings are ground and shot blasted.
- Inspection and testing
Castings are checked for size and surface defects, and test bars are tested for tensile strength, elongation, hardness and nodularity under the microscope.
Induction furnace or cupola, and which moulding line?
Three technology choices set most of a foundry's cost, quality and pollution load. Our sample uses induction melting and jolt squeeze green sand moulding.
| Induction furnace | Melts on electricity with close control of chemistry and temperature. Needed for consistent SG iron; power tariff and contract demand drive its running cost. |
|---|---|
| Cupola | Melts on coke with lower capital cost and still serves many grey iron jobbing foundries. Sulphur pick-up from coke makes SG treatment harder, and emissions need a scrubber. |
| Sandwich ladle treatment | Ferro silicon magnesium sits in a pocket under steel scrap at the ladle bottom. Simple and cheap, but magnesium recovery and fume vary more. |
| Tundish cover ladle | A lid with a pouring hole holds back the reaction, giving better magnesium recovery and less flare for regular SG production. |
| Jolt squeeze green sand | Suits medium batches of castings from a few kg to about 100 kg with a modest capital outlay. |
| No-bake resin moulding | Used for heavy or low-volume castings such as machine beds and large valve bodies, where green sand moulds would not hold their shape. |
Charge materials for grey and SG iron
Foundry grade pig iron is the largest raw material cost in the sample, followed by MS steel scrap. SG iron needs low-sulphur, low-trace-element charge, so the pig iron grade and scrap source matter more than for grey iron.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Foundry grade pig iron | 32% | 577.81 |
| MS steel scrap | 28% | 505.58 |
| Cast iron scrap and borings | 10% | 180.57 |
| Ferro silicon and ferro manganese | 8% | 144.45 |
| Ferro silicon magnesium and inoculant | 10% | 180.57 |
| Moulding sand, bentonite and core binders | 12% | 216.68 |
| Total | 100% | 1,805.66 |
Raw materials are 60.3% of sales in the sample. Runners, risers and rejected castings go back into the furnace as returns, so they are not bought in.
Foundry machinery and its cost
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Medium frequency induction melting furnace | Melts the charge and holds metal at temperature | 189.42 |
| Sand plant with intensive mixer and sand cooler | Reconditions and cools return sand | 88.39 |
| Jolt squeeze moulding machines with flasks | Compact sand around the pattern | 88.39 |
| Core shooter and core oven | Make and cure sand cores | 31.57 |
| Ladles and EOT cranes | Carry and pour molten iron | 63.14 |
| Shot blasting machine | Cleans sand and scale off castings | 44.20 |
| Fettling grinders and cut-off machines | Remove runners, risers and fins | 31.57 |
| Spectrometer and metallurgical testing lab | Checks chemistry, tensile, hardness and nodularity | 56.83 |
| Fume extraction with bag filter | Captures furnace and treatment fume | 37.88 |
| Total plant and machinery | 631.39 | |
Costs are the sample report's estimates for a 12 MT per day foundry. Get current quotations before you finalise.
Power and manpower for a 12 MT per day foundry
Power and fuel cost ₹222.50 lakh in Year 3 of the sample, about 7.4% of sales, and most of it goes to the induction furnace. Ask the utility early about contract demand and any power-intensive tariff, because the furnace load decides the sanction you need.
| Category | Number | Monthly wage (₹) | Year 1 cost (₹ lakh) |
|---|---|---|---|
| Management, supervision and administration | 15 | 30,500 | 54.90 |
| Skilled workers and operators | 34 | 19,500 | 79.56 |
| Semi-skilled and unskilled workers | 49 | 13,000 | 76.44 |
| Total | 98 | 210.90 |
Skilled roles include furnace operators, moulders, a metallurgist and a lab chemist. Wages rise 5% a year in the projections.
BIS standards and approvals for a cast iron foundry
| Grey iron castings | IS 210:2009 is compulsory under the Cast Iron Products (Quality Control) Order, 2024, so grey iron castings sold in India need a BIS licence. Export goods and very small Udyam units are exempt. |
|---|---|
| SG iron castings | IS 1865:1991 sets the grades by tensile strength and elongation, for example SG 500/7. It is not in the QCO list as of October 2026, but buyers ask for test certificates against it. |
| Pollution board consent | Foundry operations are in the CPCB Orange category. Consent to establish and operate from the State Pollution Control Board, with fume and dust control. |
| Factory and safety | Factory licence, fire NOC and safe handling of molten metal and EOT cranes; rules vary by state. |
| Power | HT connection sanctioned for the furnace and sand plant load. |
| Business registration | Udyam (MSME) and GST registration. The HSN code depends on the casting and its end use, so confirm it with your CA. |
Who buys grey and SG iron castings?
Castings are made to order. Buyers send drawings, approve samples and then release monthly schedules, so a foundry's sales depend on how many approved parts it holds. SIDBI puts India's casting output at about 15.16 million MT in 2023–24 from around 5,000 foundries.
- Automobile and tractor component makers (brackets, hubs, housings)
- Pump and valve manufacturers (casings, impellers, valve bodies)
- Machine tool and gearbox builders (beds, gearbox housings)
- Railway and power transmission equipment suppliers
- Pipe fitting, manhole cover and municipal casting buyers
Where SG iron earns more: it replaces cast steel and forgings in parts that need toughness, such as suspension and hydraulic parts, and sells at a higher price per kg than grey iron. A foundry that can hold SG grades reliably reaches better-paying buyers.
Mistakes that weaken a foundry project report
- Selling every tonne melted
Runners, risers and rejects return to the furnace. Sales should be based on good castings, which are typically only 55–70% of metal poured (indicative).
- Fast ramp-up assumed
Buyers test samples before they place schedules. A plan that hits high utilisation in Year 1 ignores months of sample approvals.
- No metallurgical lab in the budget
Without a spectrometer and nodularity checks, SG castings fail grade tests and whole heats are rejected.
- Power load under-stated
Induction melting typically uses about 550–650 kWh per tonne (indicative). Using an average tariff without demand charges understates cost.
- Receivables left out of working capital
Engineering buyers pay on credit; trade receivables are the largest current asset in the sample, so the cash credit limit must cover them.
How NPCS helps you plan a cast iron and SG iron foundry
- Product mix and capacityBalance grey and SG iron, casting weight range and daily melt for your target buyers.
- Furnace and moulding lineCompare furnace sizes and moulding routes, and list machinery with supplier quotations.
- Bank-ready project reportYield-based sales, power cost, DSCR and working capital in the format your lender expects.
- Approvals and layoutBIS licence route, pollution consent, power load and a foundry layout for your site.
NPCS has prepared project reports for metal products units since 1994, and its published client list includes 116 assignments in the metal products sector.
What's inside the cast iron and sg iron castings sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
18 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Find NPCS project reports in your budget
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Cast Iron and SG Iron Castings project report: frequently asked questions
How much does it cost to set up a cast iron and SG iron foundry in India?
A small grey iron foundry of 2–4 MT per day with a single induction furnace needs roughly ₹2–4 crore. Our sample report models a 12 MT per day grey and SG iron foundry at ₹1,367 lakh including land, building and working capital margin. Automated plants with high-pressure moulding lines cost far more. These ranges are indicative; your report costs your own capacity and site.
What is the difference between cast iron and SG iron castings?
Both are iron with more than 2% carbon. In grey cast iron the graphite forms flakes, which give good machinability and vibration damping but low ductility. In SG iron the molten metal is treated with magnesium so the graphite forms round nodules, giving strength and elongation close to cast steel. SG iron needs tighter chemistry control and testing.
Which machines are needed for a cast iron and SG iron foundry?
The core items are a medium frequency induction melting furnace, a sand plant with mixer and cooler, and moulding machines with flasks. You also need core shooters, ladles and an EOT crane, a shot blaster, fettling grinders, a spectrometer with a metallurgical lab, and fume extraction with a bag filter. In our sample the induction furnace is the largest single machinery cost.
Is BIS certification mandatory for cast iron castings?
For grey iron castings, yes. The Cast Iron Products (Quality Control) Order, 2024 makes IS 210:2009 compulsory with a BIS licence, with exemptions for export goods and for very small Udyam units. SG iron castings to IS 1865 are not in that order's list as of October 2026. Buyers still ask for IS 1865 grade test certificates.
Is a cast iron foundry business profitable?
In our illustrative sample, a 12 MT per day foundry earns a 16% return on investment in Year 3. It breaks even at about 46% of capacity and pays back in about 4.4 years. Real profit depends on casting yield, rejection rate, power tariff and how quickly buyers approve your samples and release regular orders.
Which pollution category does a foundry fall in?
Industries involving foundry operations are listed in the Orange category of the CPCB categorisation, so you need consent to establish and consent to operate from the State Pollution Control Board. Some states add capacity limits to the entry. Plan fume extraction on the furnace and dust control on the sand plant from the start.
Is the sample project report PDF free and can I use it for a loan?
The sample PDF is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, product mix and location.
Sources and references
- IS 1865:1991 Iron castings with spheroidal or nodular graphite, specificationBureau of Indian Standards, checked Oct 2026
- IS 210:2009 Grey iron castings, specificationBureau of Indian Standards, checked Oct 2026
- Circular on the Cast Iron Products (Quality Control) Order, 2024Bureau of Indian Standards, checked Oct 2026
- Cast Iron Products (Quality Control) Order, 2023, S.O. 3806(E)Gazette of India, DPIIT, checked Oct 2026
- Orange category of industries (CPCB list)State Pollution Control Board, Odisha, checked Oct 2026
- ESIA and ESMP, foundry sector, direct financeSmall Industries Development Bank of India, checked Oct 2026
