What is a steel wire rope project report?
A steel wire rope project report is a detailed project report (DPR) for a plant that draws high carbon wire rod into fine wire, twists the wires into strands and closes the strands around a core. It sets out the process, machinery, BIS licensing, project cost, means of finance, five-year projections, DSCR and break-even.
Promoters use it to size the plant and raise a term loan; banks and investors use it to judge whether the rope plant can repay from its own cash flow.
Also known as: project report on steel wire rope, steel wire rope business plan, wire rope manufacturing project report, DPR for wire rope plant.
Steel wire rope manufacturing plant cost in India
Our sample report models an integrated plant of 8.9 metric tonnes per day (2,937 MT per year) that draws its own wire. It runs 330 days a year, starts at 60% of capacity, reaches 80% in Year 5 and sells rope at ₹1,00,000 per MT before GST.
| Land and site development | 68.28 |
|---|---|
| Building and civil works | 197.38 |
| Plant and machinery | 466.74 |
| Other fixed assets | 53.25 |
| Contingencies | 33.21 |
| Preliminary and pre-operative | 20.47 |
| Working capital margin | 72.96 |
| Total | 912.29 |
| Promoter's contribution (25%) | 228.07 |
|---|---|
| Term loan from bank (75%) | 684.22 |
| Cash credit limit (separate) | 218.87 |
| Total project cost | 912.29 |
Margins in the sample are thin: net margin moves from 2.5% in Year 1 to 8.6% in Year 5. DSCR (debt service coverage ratio) is the cash available for each rupee of loan repayment, and it is lowest at 1.22 in Year 2, when full instalments begin.
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.
Steel wire rope manufacturing process
A rope is built in three layers: wires make strands, and strands are closed around a core. The integrated route in our sample starts from high carbon wire rod bought in coils.
- Pickling and phosphating
Rod coils are dipped in acid to strip mill scale, rinsed and given a phosphate coat that carries the drawing lubricant.
- Wire drawing
Straight line machines pull the rod through tungsten carbide dies in several passes, raising tensile strength as the diameter falls.
- Patenting
Between drawing passes, wire is heated and cooled under control so it regains the ductility needed for further drawing.
- Galvanising
Wire meant for galvanised rope runs through a molten zinc bath; bright rope skips this step.
- Stranding
Tubular or planetary stranders twist wires around a centre wire into strands such as 7, 19 or 36 wires.
- Closing and lubrication
The closing machine preforms six or eight strands and lays them around a fibre core or a steel core, applying rope grease as it goes.
- Testing and reeling
A sample length is pulled to break on the rope testing machine, then the rope is wound on reels and tagged by construction, size and grade.
Should you buy drawn wire or draw your own?
This is the first choice in a steel wire rope business plan, because it sets machinery cost, the pollution category and how much control you have over wire quality.
| Point | Buy drawn wire | Draw wire from rod |
|---|---|---|
| Machinery | Stranders, closing machine, testing and reeling | Adds pickling, drawing, patenting and galvanising lines |
| Raw material | Rope wire bought in each size and grade | High carbon wire rod in coils |
| Quality control | Depends on the wire supplier's tensile and torsion results | Grade and zinc coating are set in your own plant |
| Pollution category | Usually lower, as there is no acid or zinc bath | Pickling and galvanising often place the unit in Red |
| Suits | A first unit serving dealers with standard ropes | A plant aiming at cranes, mines and tender buyers |
Raw materials for steel wire rope
Raw materials take 63% of sales in the sample. High carbon wire rod comes from integrated steel plants, and its carbon content decides which rope grade (1570, 1770, 1960 or 2160 N/mm²) the drawn wire can reach.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| High carbon steel wire rod | 82% | 1,062.69 |
| Zinc for galvanising | 8% | 103.67 |
| Fibre core (polypropylene or sisal) | 4% | 51.84 |
| Rope lubricant and grease | 3% | 38.88 |
| Pickling and phosphating chemicals | 3% | 38.88 |
| Total | 100% | 1,295.96 |
Wooden or steel reels are counted under packing, at 1.1% of sales in the sample.
Wire rope making machines and their cost
Stranding machines are the largest machinery item in the sample, followed by the wire drawing line. Testing equipment must handle the breaking load of the thickest rope you plan to sell.
| Machine | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Straight line wire drawing machines | Draws rod to rope wire size and grade | 102.68 |
| Patenting and hot dip galvanising line | Heat treats wire and applies zinc | 84.01 |
| Pickling and phosphating plant with fume scrubber | Cleans and coats rod; captures acid fumes | 37.34 |
| Tubular and planetary stranding machines | Twists wires into strands | 112.02 |
| Rope closing machine with preformer | Lays strands around the core | 70.01 |
| Rope breaking load and wire testing machines | Tests rope breaking force and wire tensile and torsion | 23.34 |
| Reeling and spooling machines | Winds finished rope on reels | 18.67 |
| EOT crane | Moves bobbins, reels and rod coils | 18.67 |
| Total plant and machinery | 466.74 | |
Costs are the sample report's estimates for an 8.9 MT per day plant. Get current quotations before you finalise.
Manpower and power for a wire rope plant
Power and fuel cost ₹158.41 lakh in Year 3 of the sample, about 7.7% of sales. Most of it goes to drawing motors, the patenting furnace and the zinc bath. The plant employs 56 people across shifts.
| Category | Number | Monthly wage (₹) | Year 1 cost (₹ lakh) |
|---|---|---|---|
| Management, supervision and administration | 8 | 30,500 | 29.28 |
| Skilled workers and operators | 20 | 19,500 | 46.80 |
| Semi-skilled and unskilled workers | 28 | 13,000 | 43.68 |
| Total | 56 | 119.76 |
Skilled roles include strander and closer operators, a wire drawing setter and a testing chemist. Wages rise 5% a year in the sample.
BIS certification and licences for a steel wire rope plant
Steel wire rope is under a Quality Control Order (QCO). Rope of a covered standard cannot be sold in India without a BIS licence and the Standard Mark.
| BIS licence | Required under the Steel Wires or Strands, Nylon or Wire Ropes and Wire Mesh (Quality Control) Order, 2024, in force from 1 December 2024 (1 March 2025 for small and 1 June 2025 for micro enterprises) |
|---|---|
| Standards covered | IS 2266 general engineering ropes, IS 2365 lift ropes, IS 1855 mine winding ropes, IS 1856 haulage ropes, IS 4521 oil well ropes and IS 2141 stay strand |
| Testing | Breaking force, size, lay and mass on rope, plus tensile, torsion, reverse bend and zinc coating on wire. Micro and small units may share a lab; some tests can go to a NABL lab |
| Marking | Standard Mark on a metal tag on each reel, licence number, and a certificate of conformance with each consignment |
| Pollution consent | Consent to establish and operate from the State Pollution Control Board. In Odisha, for example, pickling and galvanising fall in Red and wire drawing alone in Orange |
| Business and factory | Udyam and GST registration, factory licence, fire NOC and an industrial power connection for the connected load |
In November 2025, DPIIT moved steel QCOs to the Ministry of Steel. The 2024 order is withdrawn only when that ministry notifies a matching order, so confirm the current order with BIS before applying. Checked October 2026.
Who buys steel wire rope in India?
Most rope is bought as a replacement. Cranes, mine winders, lifts and port equipment change ropes on a fixed schedule or after inspection, so demand keeps coming even in slow years for new projects.
Buyers order by construction (6x19, 6x36), diameter, grade, core and finish, and large buyers ask for BIS-marked rope with a test certificate for each reel.
- Crane, hoist and material handling equipment makers
- Coal and metal mines, for winding and haulage ropes
- Lift and elevator companies
- Ports, shipyards and fishing fleets
- Construction, power transmission and infrastructure contractors
- Wire rope dealers and rigging suppliers
Where a new plant wins: regional dealers and maintenance buyers need the exact construction and length quickly. A plant that holds stock of common sizes and cuts to length can win orders that large plants with long lead times miss.
Mistakes that weaken a steel wire rope project report
- One price for every rope
Price per tonne changes with grade, core, finish and diameter. A report needs a stated product mix, or revenue cannot be checked.
- No time or cost for the BIS licence
Without the licence the plant cannot sell covered ropes in India. Lab equipment, sample testing and the months before grant belong in the plan.
- Leaving out acid and zinc waste
Spent pickling acid, rinse water and zinc ash need treatment and authorised disposal, and they often decide the pollution category.
- Ignoring die wear and process scrap
Carbide dies wear with every tonne drawn, and strand ends and test lengths are lost. Both raise cost per tonne.
- Assuming tender buyers pay in 45 days
The sample assumes 45 days, and trade receivables are already its largest current asset. Mines and public sector tenders can pay later, which needs a bigger cash credit limit.
How NPCS helps you set up a steel wire rope plant
- Route and product mixDecide between buying wire and drawing your own, and which constructions and grades to make first.
- Machinery and layoutSize drawing, stranding and closing machines to your capacity and plan the shop floor.
- BIS and approvalsList the standards, lab tests and state approvals your plant needs.
- Bank-ready project reportProjections, DSCR and working capital in the format your lender wants.
NPCS's client list shows 116 assignments for metal products units, and the NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports since 1994.
What's inside the steel wire rope sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Find NPCS project reports in your budget
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Steel Wire Rope project report: frequently asked questions
What is the steel wire rope manufacturing plant cost in India?
A unit that buys drawn wire and only strands and closes rope, at about 2–4 MT per day, needs roughly ₹3–6 crore. An integrated plant that draws its own wire at 8–10 MT per day needs about ₹8–12 crore with land, building and working capital margin. Our sample report models 8.9 MT per day at ₹912 lakh. These ranges are indicative.
What raw material is used to make steel wire rope?
High carbon steel wire rod is the main input. In our sample report it is 82% of raw material cost. Zinc for galvanising adds 8%, fibre cores 4%, and rope lubricant and pickling chemicals 3% each. Rod prices follow the steel market, so the report should test a price rise against DSCR.
Is BIS certification mandatory for steel wire rope?
Yes, for ropes sold in India under the covered standards. A Quality Control Order of 2024 requires a BIS licence and the Standard Mark for ropes to IS 2266, IS 2365, IS 1855 and IS 1856, among others. Ropes made only for export are exempt. This was the position as of October 2026, so check the current order before you apply.
Which machines are needed for wire rope manufacturing?
An integrated plant starts with a pickling and phosphating plant, straight line wire drawing machines and a patenting and hot dip galvanising line. It then needs tubular and planetary stranding machines and a rope closing machine with preformer. Testing machines, reeling machines and an EOT crane complete the line. A unit that buys drawn wire skips the first three.
Is steel wire rope manufacturing profitable?
In our illustrative sample, an 8.9 MT per day plant earns a 13.6% return on investment in Year 3. It breaks even at 47.4% of capacity and pays back in about 4.6 years. Margins are thin, so profit depends on rod buying, the share of higher grade and galvanised ropes in the mix, die and power costs, and how fast buyers pay.
What is the difference between fibre core and IWRC wire rope?
A fibre core rope has strands laid around a polypropylene or natural fibre core, which makes it flexible and lighter. An independent wire rope core (IWRC) is a small steel rope at the centre, which gives higher breaking strength and resists crushing on drums. Cranes and mine winders often specify IWRC, so a plant needs both options in its product mix.
Is the sample report free and can I use it for a loan?
The sample is free to view and download as a PDF. It is an illustrative report that shows the format and depth of an NPCS project report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and product mix.
Sources and references
- Steel Wires or Strands, Nylon or Wire Ropes and Wire Mesh (Quality Control) Order, 2024, S.O. 2581(E)Department for Promotion of Industry and Internal Trade, Gazette of India, checked Oct 2026
- Circular on implementation of the Steel Wires, Wire Ropes and Wire Mesh QCO, 2024Bureau of Indian Standards, checked Oct 2026
- Product manual for steel wire ropes (IS 2266)Bureau of Indian Standards, checked Oct 2026
- Transfer of iron and steel QCOs to the Ministry of SteelDepartment for Promotion of Industry and Internal Trade, checked Oct 2026
- List of Red category industriesState Pollution Control Board, Odisha, checked Oct 2026
- List of Orange category industriesState Pollution Control Board, Odisha, checked Oct 2026
