WhatsApp us
Request a Quote

Project reports in Metal Products

Forging on Open Die Hammers Plant Project Report

Plant cost, hammers, furnaces, steel grades and five-year profitability for an open die forge, with a free sample report PDF you can open now.

Plant capacity
5.5 MT per day
Total project cost
₹624 lakh
Plant and machinery
₹297 lakh
Return on investment
24% (Year 3)
Break-even
38% of capacity
Payback period
About 3.4 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a forging on open die hammers project report?

A forging on open die hammers project report is a detailed project report (DPR) for a forge that shapes hot steel billets between flat dies. Pneumatic hammers turn them into shafts, flanges, rings and blocks. The report sets out the process, hammers and furnaces, steel inputs, buyers, project cost, finance, five-year projections, DSCR and break-even.

Promoters use it to size the forge and raise a term loan; banks use it to judge whether job-order forging income can repay the loan.

Also known as: open die forging project report, hammer forging unit project report, smith forging plant DPR, forging on open die hammers business plan.

Forging on open die hammers plant cost and economics

Our sample report models a forge making 5.5 metric tonnes (MT) of finished forgings per day, or 1,815 MT a year over 330 working days. It starts at 60% of capacity and reaches 80% in Year 5, selling at ₹1,13,000 per MT.

₹624 lakhTotal project cost
₹1,436 lakhSales in Year 3
₹151 lakhNet profit in Year 3
1.92Average DSCR
Cost of project (₹ lakh)
Land and site development72.79
Building and civil works130.09
Plant and machinery297.34
Other fixed assets38.06
Contingencies21.37
Preliminary and pre-operative13.99
Working capital margin50.10
Total623.74
Means of finance (₹ lakh)
Promoter's contribution (25%)155.94
Term loan from bank (75%)467.80
Cash credit limit (separate)150.28
Total project cost623.74

DSCR (debt service coverage ratio) is cash available for loan repayment divided by the instalment due. Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.

Manufacturing process for forging on open die hammers

An open die forge works to the buyer's drawing, one order at a time. The same hammer and flat dies make a shaft in the morning and a flange in the afternoon; the skill of the hammer crew decides the size and soundness of each piece.

  1. Cutting to weight

    Bars and billets are cut on a bandsaw or shear to the weight of the forging, plus an allowance for scale and trimming.

  2. Heating

    Billets go into an oil or gas fired box furnace and are soaked at about 1,100–1,250°C for carbon steel, so they deform without cracking.

  3. Upsetting and drawing out

    The crew upsets the billet to shorten and thicken it, then draws it out under the hammer to lengthen it, reheating whenever the steel cools below forging range.

  4. Punching and finishing

    Rings and flanges are punched or drifted, and each forging is planished to size, leaving a machining allowance on every face.

  5. Heat treatment

    Forgings are normalised, or hardened and tempered, to reach the hardness and strength set in the drawing.

  6. Shot blasting and inspection

    Scale is blasted off, then sizes and hardness are checked and ultrasonic testing looks for internal cracks and voids.

  7. Rough turning and dispatch

    Where the order asks for it, forgings are rough turned, marked with the heat number and dispatched with a test certificate.

Open die or closed die forging: which suits your plant?

The choice decides what you buy, who you sell to and how much tooling money you tie up. Many entrepreneurs see "forging" as one business, but the two routes serve different buyers.

PointOpen die hammer forgingClosed die forging
DiesFlat or simple dies that fit many jobsA cavity die cut for each part
Typical workShafts, flanges, rings, blocks, gear blanksAutomobile and tractor parts, hand tools
Batch sizeOne piece to a few hundredThousands of identical pieces
Tooling cost per orderLowHigh, recovered over long runs
Machining allowanceLarger, as the shape is approximateSmaller, close to final shape
What sells the workGrade range, weight range and fast deliveryPrice per piece and supply contracts

Steel grades and raw materials for open die forging

Steel is bought as round or square bars and billets in the grade the buyer names. EN8 or C45 is common for general shafts, and EN19 or EN24 for parts that are hardened and tempered. Every bar should come with a mill test certificate, because the forge's own certificate depends on it.

Raw materials in our sample report, Year 3
Raw materialShare of costYear 3 (₹ lakh)
Carbon steel bars and billets62%523.51
Alloy steel bars and blooms32%270.20
Quenching oil and heat treatment consumables3%25.33
Forging lubricants and tool consumables3%25.33
Total100%844.37

Raw materials are 58.8% of sales in the sample. Steel prices move often, so price each order on the day's bar rate.

Hammers and machinery for an open die forge

The hammer set is the largest single item in the sample, at about a third of the machinery cost. Pneumatic hammers carry their own compressor, so they need no separate air plant.

MachineWhat it doesSample cost (₹ lakh)
Pneumatic open die forging hammer setUpsets, draws out and shapes hot billets95.15
Oil or gas fired forging furnacesHeat billets to forging temperature41.63
Heat treatment furnace with quench tankNormalising, hardening and tempering38.66
Rail-bound manipulator and jib cranesHold and turn hot work under the hammer35.68
Bandsaw and billet shearing machineCut bars to forging weight20.81
EOT craneMoves steel and forgings around the shop20.81
Testing lab with ultrasonic flaw detectorChecks hardness and internal soundness17.84
Shot blasting machineRemoves scale before inspection14.87
Lathe for rough turningRough machines forgings on request11.89
Total plant and machinery297.34

Costs are the sample report's estimates. Get current quotations for your hammer sizes before you finalise.

Fuel, power and manpower for a hammer forge

Heating is where most of a forge's energy goes. The Pune forging cluster study by TERI for SIDBI puts heating at 80–90% of energy use, with hammers, presses and compressors taking the rest.

Furnace fuelFurnace oil, light diesel oil, natural gas or LPG; induction heating for smaller bars where power is cheap
Power and fuel cost₹107.96 lakh in Year 3 of the sample, 7.5% of sales
Manpower36 people in the sample, including 13 skilled workers such as hammer drivers, furnace men and heat treaters
Wage bill₹76.80 lakh in Year 1, rising 5% a year
Working capital₹200.38 lakh in Year 1, mostly buyer credit of 45 days, with 30 days of steel stock
Working days330 a year in the sample

Fuel prices and power tariffs vary by state. Your report uses the rates at your site.

Licences and standards for an open die forging unit

Business registrationUdyam (MSME) registration and GST registration
Pollution consentConsent to establish and operate from the State Pollution Control Board. Forging of ferrous and non-ferrous metals with oil or gas fired furnaces is listed in the Orange category (Odisha SPCB list, checked October 2026)
Factory licenceUnder the Factories Act where worker and power thresholds apply; rules vary by state
Product standardIS 2004:1991, Carbon steel forgings for general engineering purposes, is the usual Indian reference; many buyers also specify their own drawing and grade
Fuel storageFire NOC and safe storage for furnace oil or LPG, as the local authority requires

Who buys open die forgings in India?

Open die forgings go to engineering firms that need strong steel parts in small batches or in sizes too large for closed dies. Most orders come with a drawing, a steel grade and a heat treatment specification, and repeat orders follow good test results and on-time delivery.

  • Machinery and machine tool builders
  • Valve, pump and pipeline fitting makers
  • Gear and transmission makers
  • Railway, earthmoving and mining equipment makers
  • Maintenance departments of power, steel and sugar plants
  • Engineering traders and exporters

Where a new forge wins: maintenance buyers often need a single shaft or ring within days. A forge that keeps common grades in stock and quotes fast can earn better rates than on routine batch work.

Mistakes that weaken a forging project report

  • Selling price set on billet weight

    Scale, trimming and machining allowance mean finished forging weight is less than steel bought. Revenue must be on finished weight, or profit is overstated.

  • Fuel taken at a token figure

    A large forging is often reheated more than once before it reaches size. Fuel per tonne should come from the furnace type and reheat count, not a flat guess.

  • Hammer size chosen before the product mix

    A hammer too small for the heaviest orders turns away work; one too large wastes power on small jobs. Fix the weight range first.

  • No heat treatment or testing in the plan

    Buyers reject forgings without hardness and ultrasonic reports. Outsourcing both adds cost and days that the projections must show.

How NPCS helps you plan an open die forge

  • Product mix and hammer sizingMatch hammer capacity and furnace size to the weights and grades your buyers order.
  • Machinery and suppliersCompare hammers, furnaces, manipulators and testing equipment, with current quotations.
  • Bank-ready project reportProjections, fuel and yield assumptions, DSCR and working capital in your lender's format.
  • Layout and approvalsShop layout for hot work and cranes, power load and the approvals list for your state.

NPCS's client list shows 116 assignments in metal products, and the NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports since 1994.

What's inside the forging on open die hammers sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

19 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS forging on open die hammers project reports

These are forging on open die hammers project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Forging ON Open DIE Hammers3000 MT/Annum (Steel forging various grade)₹18.43 crore42%55% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Forging on Open Die Hammers project report: frequently asked questions

What is the cost of a forging on open die hammers manufacturing plant in India?

A 5–8 MT per day open die forge with heat treatment and testing on its own land needs roughly ₹5–9 crore. A small job forge with one or two hammers in a rented shed may need ₹1.5–3 crore. These ranges are indicative. Our sample report models a 5.5 MT per day plant at ₹623.74 lakh, including ₹297.34 lakh of plant and machinery.

What is the difference between open die and closed die forging?

Open die forging shapes hot steel between flat or simple dies, so one set of dies can make many shapes and sizes. Closed die forging presses steel into a cavity cut to the part shape. Open die suits small batches, large parts and custom drawings; closed die suits long runs of identical parts such as automobile components.

Which hammer size do I need for open die forging?

Hammer size follows the heaviest forging you plan to make. Small job forges usually start with pneumatic hammers of about 0.5 to 2 tonnes falling weight, which handle bars and billets of moderate section. Heavier shafts and blocks need bigger hammers or a hydraulic press, with a manipulator and crane to handle the work.

Which steel grades are forged on open die hammers?

Most orders are in carbon steels such as EN8 and C45 and alloy steels such as EN19 and EN24, with stainless grades for valve and pipeline buyers. In our sample report carbon steel bars and billets are 62% of raw material cost and alloy steel 32%. The buyer's drawing fixes the grade and the heat treatment.

Is an open die forging unit profitable?

In our illustrative sample, a 5.5 MT per day forge earns a 24% return on investment in Year 3. It breaks even at 38% of capacity and pays back in about 3.4 years. Real results depend on steel buying, furnace fuel cost, yield from billet to finished forging and how quickly buyers pay.

Can I get a bank loan or CGTMSE cover for a forging unit?

Banks fund forging units as MSME term loans with a cash credit limit for working capital. Eligible micro and small enterprises can get collateral-free guarantee cover under CGTMSE, whose ceiling is ₹10 crore per borrower from 1 April 2025. The bank decides eligibility after appraising the project report, so confirm terms with your lender.

Is the sample report free and can I use it for a loan?

The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own hammer sizes, location and lender.

Sources and references

  1. List of industries under the Orange category (forging of ferrous and non-ferrous metals using oil and gas fired furnaces, Sl. No. 32)State Pollution Control Board, Odisha, checked Oct 2026
  2. Product manual circular for IS 2004:1991, Carbon steel forgings for general engineering purposesBureau of Indian Standards, checked Oct 2026
  3. Cluster profile report: Pune forging clusterTERI for SIDBI, checked Oct 2026
  4. Credit Guarantee Scheme for Micro and Small Enterprises: scheme guidelinesOffice of the Development Commissioner (MSME), checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different metal products project?

These are a few of the projects we advise on. NPCS's published client list records 116 metal products assignments, so tell us what you are planning.

Tell us your project

Recent metal products assignments

  • Long Island Trading Co. Pvt. Ltd
    Project Report on Aluminium Can Manufacturing Plant SetupIndore, 2026
  • Allotrope Engineers
    Bankable Project Report on Gas Atomized Aluminium PowderHyderabad, 2026
  • P M Infrastructure Private Limited
    Comprehensive Market Research Report on TMT BarsBangalore, 2026
  • Arham Recycling Private Limited
    Pre-Feasibility Report on Copper Wire RecyclingFaridabad, 2026
  • Bihar Foundry & Castings Limited
    Industrial Project Report on Electrolytic Manganese MetalRanchi, 2026
  • Rgcon Itm
    Comprehensive Project Report on Copper CathodeVisakhapatnam, 2026
  • Krishnay Recycling Pvt Ltd
    Pre-Feasibility Report on Project Planning and Feasibility Report on Copper Cathode and CoSouth Africa, 2026
  • Goodluck India Ltd
    Techno-Economic Project Report on Inner Grooved Copper TubesSikandrabad, 2025

Get a forging on open die hammers project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Forging on Open Die Hammers Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free forging on open die hammers sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Forging on Open Die Hammers sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp