WhatsApp us
Request a Quote

Project reports in Metal Products

Bearing Ring by Forging Route Project Report

Plant cost, forging and ring rolling machinery, bearing steel needs and five-year profitability for a forged bearing ring plant, with a free sample report to open now.

Plant capacity
3.4 MT per day
Total project cost
₹910 lakh
Plant and machinery
₹458 lakh
Return on investment
13% (Year 3)
Break-even
43% of capacity
Payback period
About 4.6 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a bearing ring by forging route project report?

A bearing ring by forging route project report is a detailed project report (DPR) for a plant that hot forges bearing steel billets, rolls them into rings, then anneals and turns them. The rings go to bearing makers. The report covers process, machinery, steel needs, market, project cost, finance, five-year projections, DSCR and break-even.

Promoters use it to size the forging line and raise a term loan; lenders use it to judge whether the plant can repay.

Also known as: forged bearing ring project report, bearing races forging project report, bearing ring forging business plan, rolled ring forging DPR.

Bearing ring by forging route manufacturing plant cost in India

Our sample report models a plant forging 3.4 metric tonnes per day (MT per day) of rings, or 1,122 MT a year over 330 working days. It starts at 60% of capacity and reaches 80% in Year 5, selling forged, annealed and turned rings at ₹1,69,000 per MT.

₹910 lakhTotal project cost
₹1,327 lakhSales in Year 3
₹121 lakhNet profit in Year 3
1.39Average DSCR
Cost of project (₹ lakh)
Land and site development76.85
Building and civil works228.62
Plant and machinery457.97
Other fixed assets45.34
Contingencies34.33
Preliminary and pre-operative21.08
Working capital margin46.19
Total910.38
Means of finance (₹ lakh)
Promoter's contribution (25%)227.60
Term loan from bank (75%)682.78
Cash credit limit (separate)138.58
Total project cost910.38

Plant and machinery is half the project cost, which is typical of forging: presses, ring mills and furnaces are heavy assets for the tonnage they produce. The debt service coverage ratio (DSCR) compares the cash a year earns with that year's loan instalments. It dips to its lowest, 1.22, in Year 2, when the first full year of principal falls due.

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.

Bearing ring by forging route manufacturing process

The plant turns bearing steel bar into soft, machinable ring blanks. Bearing makers then harden, grind and assemble them, so your quality is judged on size, structure and hardness at delivery.

  1. Billet cutting

    Bars are sheared or band-sawn into billets cut to a set weight for each ring size, since billet weight decides ring size and flash.

  2. Induction heating

    Billets are heated to forging temperature, roughly 1,050–1,150°C for this steel, in a medium frequency induction heater that limits scale and surface decarburisation.

  3. Upsetting and piercing

    The forging press flattens the billet into a pancake and punches out the centre, leaving a thick ring blank and a small slug of scrap.

  4. Ring rolling

    A radial ring rolling machine squeezes the wall between a driven roll and a mandrel, growing the diameter while axial rolls hold the height.

  5. Spheroidise annealing

    Rings are held just below the hardening range and cooled slowly so carbides form fine spheres, which softens the steel for turning and even hardening later.

  6. Shot blasting

    Scale from forging and annealing is blasted off with steel shot so turning tools do not wear on it.

  7. Turning and inspection

    CNC lathes turn the rings to drawing, then samples are checked for hardness, microstructure, decarburisation depth and dimensions before packing.

Forging, ring rolling or tube cutting: which route fits your rings?

Ring size decides the route more than anything else. Pick the size band your buyers need first, then the machines; a press and ring mill bought for the wrong band sit idle.

Common routes for bearing rings (indicative size bands)
Cutting from tube or barUsed for small rings, up to about 60 mm outside diameter. Low machine cost, but more steel goes into chips.
Closed-die hot forgingAlso suits small rings. Each ring size needs its own die set, so it pays only on long runs of one size.
Hot forging plus ring rollingThe usual route for medium and large rings, from about 100 mm upward. The rolled preform uses up to about 95% of the billet and the grain follows the ring.
Cold ring rollingFinishes rings of about 50–200 mm from forged or tube preforms to closer size, cutting turning time.
Automatic hot formerA multi-station horizontal machine that forges small rings at high speed. It suits high-volume automotive sizes but needs much higher capital.

Our sample report models the forging plus ring rolling route.

Bearing steel and other raw materials

The ring is almost all steel. High carbon chromium bearing steel (100Cr6, equivalent to SAE 52100) comes as hot rolled round bars from a few alloy steel mills. Units agree prices for each quarter and keep about a month of stock. In our sample, raw materials are 57.8% of sales.

Raw materialShare of costYear 3 (₹ lakh)
Bearing steel round bars (100Cr6 or SAE 52100)94.0%720.84
Die steel for forging and rolling tools3.0%23.01
Graphite die lubricant1.5%11.50
Steel shot for blasting1.5%11.50
Total100.0%766.85

Steel in, rings out: scale, the pierced slug, flash and turning allowance all leave the billet heavier than the finished ring. Your report should cost steel on gross input weight per ring, not on finished weight.

Machinery for a bearing ring forging plant

MachineWhat it doesSample cost (₹ lakh)
Bar shearing and band saw cutting lineCuts bars into weighed billets27.48
Medium frequency induction billet heaterHeats billets fast with little scale64.12
Hot forging press with upset and pierce diesUpsets and pierces the ring blank109.91
Radial ring rolling machineRolls the blank to near final size82.43
Continuous spheroidise annealing furnaceSoftens rings for turning73.27
Shot blasting machineRemoves scale18.32
CNC turning machinesTurn rings to drawing size64.12
Metallurgical lab and hardness testersChecks hardness and microstructure18.32
Total plant and machinery457.97

Costs are the sample report's estimates for a 3.4 MT per day line. Get current quotations before you finalise.

Manpower and power for the plant

The sample plant runs with 32 people. Power and fuel cost ₹97.65 lakh in Year 3, or 7.4% of sales, mostly for the induction heater and the annealing furnace. The plant usually needs a high tension power connection.

CategoryNumberMonthly wage (₹)Year 1 (₹ lakh)
Management, supervision and administration530,50018.30
Skilled workers and operators1119,50025.74
Semi-skilled and unskilled workers1613,00024.96
Total3269.00

The skilled group should include a metallurgist and a die maker; both are hard to replace mid-season.

Licences and standards for a bearing ring forging unit

Business registrationUdyam (MSME) registration and GST registration
Pollution board consentConsent to establish and operate from the State Pollution Control Board. Forging of ferrous metals using oil and gas fired furnaces is listed in the Orange category under CPCB criteria; confirm the category for your heating and annealing setup with your state board
Steel standardBearing steel to IS 4398 is under the Steel and Steel Products Quality Control Order, implemented from 15 February 2021, so buy bars only from BIS-licensed mills or BIS-licensed import sources
Factory licence and safetyRegistration under the Factories Act and a fire NOC; rules on furnaces, presses and worker numbers vary by state
PowerIndustrial power connection sanctioned for the connected load of the induction heater, press and furnace
Customer approvalBearing makers audit the plant and approve each ring size on sample lots before regular orders; automotive buyers usually ask for a certified quality system

Who buys forged bearing rings?

Demand follows the output of cars, two-wheelers, tractors, electric motors and industrial gearboxes, because every bearing in them starts as a pair of rings. Large bearing companies forge part of their needs and buy the rest from independent forging units, often by size range.

Rings are usually bought against a drawing for a fixed size, with steel price changes passed on through an agreed formula. That makes delivery record and consistency the main reasons a buyer stays with a supplier.

  • Ball and roller bearing manufacturers
  • Automobile and tractor component makers
  • Bearing ring turning and grinding units
  • Exporters of bearing components
  • Gearbox and motor manufacturers

Plan for the approval lag: a new forging unit is rarely given volume before its sample lots pass the buyer's tests. Our sample starts at 60% of capacity in Year 1 for this reason, and your report should show how you carry costs until approvals come through.

Mistakes that weaken a bearing ring by forging route project report

  • Costing steel on finished ring weight

    Scale, slug, flash and turning allowance are lost on every ring. Ignoring them under-states raw material cost, which is already the largest cost head.

  • Sizing the press but not the furnace

    Spheroidise annealing is a long cycle. If furnace capacity is short, rings pile up after forging and output falls below the plan.

  • Leaving out die and mandrel wear

    Upset dies, piercing punches and rolling mandrels wear fast at forging heat. Die steel is 3% of raw material cost in our sample, and it should never be zero.

  • One machine set for every ring size

    A press and ring mill cover a limited size band. Promising buyers sizes the line cannot make leads to idle capacity or outsourcing.

  • No decarburisation control

    A soft, carbon-poor skin on the ring is rejected by bearing makers. Heating time, furnace atmosphere and turning allowance must allow for it.

How NPCS helps you set up a bearing ring forging plant

  • Size band and capacityMatch ring sizes, tonnage and route to the bearing makers you plan to supply.
  • Machinery and furnace sizingBalance press, ring mill and annealing capacity, and compare supplier quotations.
  • Bank-ready project reportProjections, DSCR and working capital in the format your lender and credit committee expect.
  • Approvals and layoutPlant layout, power load and the approvals list for your state.

NPCS's client list records 116 assignments in steel and metal products. The NPCS project team, led by founder Ajay Kumar Gupta, has prepared project reports for industrial plants since 1994.

What's inside the bearing ring by forging route sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

18 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS bearing ring by forging route project reports

These are bearing ring by forging route project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Bearing Ring by Forging Route25000 Bearing Ring/Day₹2.15 crore41%72% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Bearing Ring by Forging Route project report: frequently asked questions

What is the cost of a bearing ring forging plant in India?

Our sample report models a 3.4 MT per day plant at ₹910 lakh, of which plant and machinery is ₹458 lakh. As an indicative guide, a line with one forging press, a ring rolling machine and an annealing furnace costs roughly ₹6–12 crore including building. Automatic hot formers or larger ring mills take the cost well above that.

Which steel is used to make forged bearing rings?

Most rings are forged from high carbon chromium bearing steel, sold as 100Cr6 or SAE 52100. In India it is specified under IS 4398, which falls under the steel Quality Control Order, so bars must come from BIS-licensed mills. In our sample report bearing steel bars make up 94% of raw material cost.

Which machines are needed for bearing ring forging?

The core line is a bar shearing or sawing line, an induction billet heater, a hot forging press with upset and pierce dies and a radial ring rolling machine. After forging come a spheroidise annealing furnace, a shot blasting machine, CNC turning machines and a metallurgical lab. In our sample the forging press is the largest single item at ₹109.91 lakh.

Is bearing ring forging a profitable business?

In our illustrative sample, the plant reaches a 13% return on investment in Year 3, breaks even at 43% of capacity and pays back in about 4.6 years. Margins depend on steel buying, forging yield, furnace fuel cost and how quickly bearing makers approve your rings for regular orders.

Why are bearing rings forged instead of cut from tube?

Forging and ring rolling put most of the billet into the ring and give a grain flow that follows the ring shape, which helps rings carry high loads. Machining from tube or bar wastes more steel. Very small rings are still often cut from tube, while medium and large rings are usually forged and rolled.

Is the bearing ring by forging route project report PDF free, and can I use it for a loan?

The sample PDF is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report. Its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, ring sizes, location and lender.

Sources and references

  1. IS 4398:1994 Carbon-chromium steel for the manufacture of balls, rollers and bearing races (Know your standards)Bureau of Indian Standards, checked Oct 2026
  2. Circular on capability to supply steel grades, including IS 4398 bearing steel, under the Steel and Steel Products (Quality Control) OrderMinistry of Steel, Government of India, checked Oct 2026
  3. Categorization of industrial sectors under Orange as per CPCB criteriaState Pollution Control Board, Odisha, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different metal products project?

These are a few of the projects we advise on. NPCS's published client list records 116 metal products assignments, so tell us what you are planning.

Tell us your project

Recent metal products assignments

  • Long Island Trading Co. Pvt. Ltd
    Project Report on Aluminium Can Manufacturing Plant SetupIndore, 2026
  • Allotrope Engineers
    Bankable Project Report on Gas Atomized Aluminium PowderHyderabad, 2026
  • P M Infrastructure Private Limited
    Comprehensive Market Research Report on TMT BarsBangalore, 2026
  • Arham Recycling Private Limited
    Pre-Feasibility Report on Copper Wire RecyclingFaridabad, 2026
  • Bihar Foundry & Castings Limited
    Industrial Project Report on Electrolytic Manganese MetalRanchi, 2026
  • Rgcon Itm
    Comprehensive Project Report on Copper CathodeVisakhapatnam, 2026
  • Krishnay Recycling Pvt Ltd
    Pre-Feasibility Report on Project Planning and Feasibility Report on Copper Cathode and CoSouth Africa, 2026
  • Goodluck India Ltd
    Techno-Economic Project Report on Inner Grooved Copper TubesSikandrabad, 2025

Get a bearing ring by forging route project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Bearing Ring by Forging Route Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free bearing ring by forging route sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Bearing Ring by Forging Route sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp