What is a methyl methacrylate project report?
A methyl methacrylate project report is a detailed project report (DPR) for a plant that makes MMA monomer, usually from acetone, hydrogen cyanide, sulphuric acid and methanol. It sets out the process route, machinery, raw materials, approvals, project cost, means of finance, five-year projections, DSCR and break-even that investors and lenders check before funding.
Chemical companies, investors and lenders use it to judge the route, plant size and payback before committing capital.
Also known as: MMA project report, project report on methyl methacrylate, methyl methacrylate business plan, MMA monomer plant feasibility report.
Methyl methacrylate manufacturing plant cost in India
Our sample report models a plant making 8.6 metric tonnes per day (MT per day) of MMA monomer on the acetone cyanohydrin route. It runs 330 days a year, starting at 60% capacity and reaching 80% in Year 5, and sells at ₹1,32,000 per MT.
Plant and machinery is half of the project cost, because the plant needs corrosion-resistant reactors, vacuum distillation and a spent acid unit. The term loan carries 75% of the cost, so the lowest debt service coverage ratio (DSCR, cash available to repay the loan divided by the instalments due) matters. In the sample it is 1.35, in Year 2, when full repayments start.
| Land and site development | 127.34 |
|---|---|
| Building and civil works | 286.54 |
| Plant and machinery | 695.48 |
| Other fixed assets | 109.96 |
| Contingencies | 49.10 |
| Preliminary and pre-operative | 31.71 |
| Working capital margin | 87.34 |
| Total | 1,387.47 |
| Promoter's contribution (25%) | 346.87 |
|---|---|
| Term loan from bank (75%) | 1,040.60 |
| Cash credit limit (separate) | 262.01 |
| Total project cost | 1,387.47 |
Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative and model a small plant to show the report format.
Methyl methacrylate manufacturing process
The acetone cyanohydrin (ACH) route turns acetone and hydrogen cyanide into monomer in three reaction stages, then purifies it. Every stage handles a hazardous stream, so the process is run in closed equipment with vent scrubbing.
- Cyanohydrin formation
Acetone reacts with hydrogen cyanide (HCN) over a basic catalyst, kept cold, to form acetone cyanohydrin.
- Amidation
The cyanohydrin is mixed with concentrated sulphuric acid and heated, giving methacrylamide sulphate.
- Esterification
Methanol and water are added to the amide mixture, which forms crude methyl methacrylate and a spent acid stream.
- Separation and washing
The crude monomer is split from the acid layer and washed free of methanol and acid traces.
- Vacuum distillation
Columns remove light ends and heavy residues to reach 99.9% purity; vacuum keeps temperatures low so the monomer does not polymerise.
- Stabilising and storage
An inhibitor such as hydroquinone methyl ether (MEHQ) is dosed, and the monomer is held cool before filling drums or tankers.
- Spent acid treatment
The ammonium bisulphate and acid stream is regenerated to sulphuric acid or converted to a saleable salt instead of being discharged.
Which route should an MMA plant use?
The route decides the feedstock you must secure, the waste you must handle and the scale at which the plant pays. The choice is usually made before any other number in the report.
| Acetone cyanohydrin (ACH) | Acetone, hydrogen cyanide, sulphuric acid and methanol. The oldest and most widely used route, and the one in our sample. Needs a safe HCN source and produces a large spent acid stream. |
|---|---|
| C4 oxidation | Isobutylene or tert-butanol is oxidised in two catalytic stages to methacrylic acid, then esterified with methanol. No cyanide, but it needs a steady C4 feed from a refinery or cracker. |
| C2 (ethylene based) | Ethylene, carbon monoxide and methanol make methyl propionate, which is condensed with formaldehyde to MMA. Cyanide-free with little by-product, but built only at large scale next to gas supply. |
| Depolymerisation of acrylic scrap | PMMA scrap is heated until it cracks back to crude monomer, which is then distilled. Small scale and low capital; purity depends on the scrap, so output is usually sold as regenerated MMA. |
Raw materials for methyl methacrylate
Acetone is the largest raw material cost in the sample, and hydrogen cyanide is the hardest to secure. Raw materials come to 53.6% of sales in Year 3, so a rise in acetone price moves profit more than any other input.
| Raw material | Share of cost | Year 3 (₹ lakh) |
|---|---|---|
| Acetone | 42% | 590.78 |
| Hydrogen cyanide | 28% | 393.85 |
| Sulphuric acid and oleum | 14% | 196.93 |
| Methanol | 12% | 168.79 |
| Polymerisation inhibitor and catalysts | 4% | 56.26 |
| Total | 100% | 1,406.61 |
HCN is acutely toxic and is rarely moved by road; ACH plants usually make it on site or take it by pipeline from a neighbouring unit.
Machinery for an MMA plant
The distillation columns with their vacuum system are the largest single item in the sample. Wetted parts in the amidation section must resist hot concentrated sulphuric acid, which sets the material of construction.
| Equipment | What it does | Sample cost (₹ lakh) |
|---|---|---|
| Acetone cyanohydrin reactor system | Reacts acetone with HCN under cooling | 111.28 |
| Amidation reactor with acid handling | Converts ACH to methacrylamide sulphate | 104.32 |
| Esterification reactor and phase separator | Forms crude MMA and splits off spent acid | 90.41 |
| Distillation columns with vacuum system | Purifies monomer to specification | 139.10 |
| Spent acid recovery unit | Treats the ammonium bisulphate stream | 83.46 |
| Refrigerated storage tanks with inhibitor dosing | Keeps monomer cool and stabilised | 55.64 |
| Vent scrubber and effluent treatment plant | Captures vapours and treats wastewater | 55.64 |
| Gas chromatograph and QC laboratory | Tests purity, acidity and inhibitor level | 20.86 |
| Chillers, cooling tower and boiler | Supply cooling and process steam | 34.77 |
| Total plant and machinery | 695.48 | |
Costs are the sample report's estimates. Get current quotations and a licensor's process package before you finalise.
Manpower and utilities for a methyl methacrylate plant
A continuous chemical plant runs three shifts, so headcount is higher than output alone suggests. The sample employs 77 people, and power and fuel cost ₹176.61 lakh in Year 3, or 6.7% of sales, mostly for refrigeration, vacuum and steam.
| Category | Number | Monthly wage (₹) | Year 1 (₹ lakh) |
|---|---|---|---|
| Management, supervision and administration | 12 | 32,500 | 46.80 |
| Skilled workers and operators | 27 | 20,500 | 66.42 |
| Semi-skilled and unskilled workers | 38 | 13,500 | 61.56 |
| Total | 77 | 174.78 |
Wages are assumed to rise 5% a year. Operators for the HCN and acid sections need specific training before start-up.
Approvals for a methyl methacrylate plant
Approvals take longer than construction for most chemical plants, so they belong at the start of the project timeline. These are the ones specific to MMA, checked as of October 2026.
| Pollution category | Organic chemicals manufacturing is in the Red category under CPCB criteria; consent to establish and to operate from the State Pollution Control Board |
|---|---|
| Environmental clearance | Item 5(f), synthetic organic chemicals, of the EIA Notification 2006: Category A (central) outside a notified industrial area, Category B (state) inside one, unless within 5 km of protected or critically polluted areas |
| Hazardous chemicals | Methyl methacrylate is listed in Schedule 1 of the Manufacture, Storage and Import of Hazardous Chemical Rules, 1989, which set duties for safety data, storage and emergency plans |
| Product standard | IS 17982:2022, Methyl methacrylate, Specification, from the Bureau of Indian Standards |
| Factory and fire | Factory licence under the state factory rules and a fire NOC for flammable liquid storage |
Who buys methyl methacrylate in India?
Acrylic sheet and PMMA granule makers take the largest share of monomer, followed by emulsion polymer makers who supply paints, coatings and adhesives. Many Indian buyers source monomer through importers and traders, so a domestic plant competes on landed cost and reliable supply rather than on product features.
Buyers qualify a new supplier slowly. They test trial lots for purity, acidity, colour and inhibitor content, and once approved a supplier tends to keep the account.
- Cast and extruded acrylic sheet makers
- PMMA moulding granule compounders
- Acrylic emulsion and paint producers
- Adhesive, sealant and resin makers
- PVC impact modifier and processing aid makers
- Dental and medical acrylic makers
Where a domestic plant wins: monomer must arrive with enough inhibitor and not too warm. Short, cooled deliveries from a nearby plant are easier to manage than long sea voyages and port storage.
Mistakes that weaken a methyl methacrylate project report
- Pricing monomer off a single month
Asian MMA prices swing with new capacity and demand. A report should test DSCR at a lower selling price and a higher acetone price together.
- Treating spent acid as a footnote
The ACH route makes more spent acid by weight than monomer. Recovery capital, running cost or disposal charges must sit in the projections.
- Assuming hydrogen cyanide can simply be bought
HCN supply decides where the plant can stand. A report without a named, permitted source for it is not ready for a lender or a board.
- Under-sizing cooled storage
Monomer that warms up or loses inhibitor can polymerise in the tank. Chilled storage, inhibitor checks and drum turnover belong in capital and running costs.
- Picking a site outside an industrial estate
That moves environmental clearance to Category A at the central level, which usually adds months to the schedule and interest during construction.
How NPCS helps you plan a methyl methacrylate plant
- Route and scale studyCompare ACH, C4 and scrap-based routes against your feedstock, site and budget.
- Feedstock and by-product planMap acetone, HCN and methanol supply and the spent acid route.
- Bank and board-ready reportProjections, DSCR, sensitivity to prices and working capital in the format your lender wants.
- Approvals roadmapPollution category, environmental clearance and hazardous chemical duties for your state and site.
NPCS's client list records 269 specialty chemical assignments, including one for methyl methacrylate, for entrepreneurs, banks and companies in India and abroad.
What's inside the methyl methacrylate sample report
- Introduction
- Uses and applications
- Market potential
- Manufacturing process
- Raw materials
- Plant and machinery
- Land, building and utilities
- Manpower
- Licences and approvals
- Project cost and means of finance
- Working capital
- Projected profitability
- Cash flow statement
- Projected balance sheet
- Depreciation
- Term loan repayment
- Debt service coverage
- Break-even analysis
- Financial ratios
- Key assumptions
- Conclusion
- Monthly loan repayment schedule
19 pages, five-year projections, illustrative figures.
Open sample reportFree sample or a report for your project?
| What you get | Free sample | NPCS report for your project |
|---|---|---|
| Capacity and location | Typical unit | Your capacity, site and state |
| Figures | Illustrative | Built on current prices and quotations |
| Machinery suppliers and quotations | No | Yes |
| Market survey for your region | No | Yes |
| Bank or scheme format (PMEGP, term loan) | No | Yes |
| Use for a loan application | No | Yes |
Real NPCS methyl methacrylate project reports
These are methyl methacrylate project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.
| Project report | Plant capacity | Total investment | Rate of return | Break-even | Action |
|---|---|---|---|---|---|
| Methyl Methacrylate (MONOMER) From Acrylic Scrap | 300000 Ltrs./Annum | ₹1.95 crore | 40% | 48% | Get this report |
| Methyl Methacrylate (MMA) | Methyl Methacrylate (MMA): 2500 Ltrs./day | ₹6.16 crore | 27% | 62% | Get this report |
Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.
What clients say about NPCS
4.7
264 Google reviews, as of 20 Oct 2026
Clients most often mention
- feasibility reports 18
- project report 16
- helpful for startups 15
- detailed reports 8
-
Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.
Piyush Singh, Google review, 2026
-
Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended
Saroj Yadav, Google review, 2026 View on Google
-
In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.
Shrishti Gautam, Google review, 2026
-
NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.
Raj Yadav, Google review, 2026
Methyl Methacrylate project report: frequently asked questions
What is the cost of a methyl methacrylate plant in India?
Our sample report models an 8.6 MT per day plant at a total project cost of ₹1,387 lakh, with plant and machinery at ₹695 lakh. Plants built abroad on the main commercial routes are far larger and cost many times more. Your project report works out the cost for your capacity, route, site and hydrogen cyanide supply.
How is methyl methacrylate made?
Most MMA is made by the acetone cyanohydrin route. Acetone reacts with hydrogen cyanide, the cyanohydrin is converted to methacrylamide sulphate with sulphuric acid, and the amide is esterified with methanol. The crude monomer is washed, distilled under vacuum and stabilised with an inhibitor. Other routes start from isobutylene, ethylene or acrylic scrap.
What raw materials are needed for MMA production?
On the acetone cyanohydrin route you need acetone, hydrogen cyanide, sulphuric acid or oleum, and methanol, plus a polymerisation inhibitor and catalysts. In our sample report acetone is the largest item at 42% of raw material cost, followed by hydrogen cyanide at 28%. Raw materials come to 53.6% of sales in Year 3.
Is methyl methacrylate hazardous to store?
Yes. MMA is a flammable liquid with a flash point of about 10°C, and it can polymerise with heat release if its inhibitor is used up, if it is heated or if it is contaminated. Plants keep it inhibited and cool, check inhibitor levels and follow the hazardous chemical rules, which list methyl methacrylate in Schedule 1.
Which approvals does a methyl methacrylate plant need?
Organic chemicals manufacturing is in the Red pollution category, so you need consent to establish and operate from the State Pollution Control Board. Synthetic organic chemical plants also need environmental clearance under item 5(f) of the EIA Notification 2006. Factory, fire and hazardous chemical approvals follow, and IS 17982 is the product standard.
Is methyl methacrylate manufacturing profitable?
In our illustrative sample, an 8.6 MT per day plant earns a 17% return on investment in Year 3, breaks even at 44% of capacity and pays back in about 4.2 years. The lowest DSCR is 1.35 in Year 2. Real returns depend mostly on acetone and monomer prices and on the cost of handling spent acid.
Is the sample report free and can I use it for a loan?
The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan or board approval, NPCS prepares a report for your own capacity, route and site.
Sources and references
- IS 17982:2022 Methyl methacrylate, SpecificationBureau of Indian Standards, checked Oct 2026
- Manufacture, Storage and Import of Hazardous Chemical Rules, 1989Inspectorate of Factories and Boilers, Government of Goa, checked Oct 2026
- Categorization of industrial sectors under Red as per CPCB criteriaState Pollution Control Board, Odisha, checked Oct 2026
- Affidavit of MoEF&CC on item 5(f) of the EIA Notification 2006National Green Tribunal (filing by the Ministry of Environment, Forest and Climate Change), checked Oct 2026
- Methyl methacrylate monomer, inhibited: chemical datasheetCAMEO Chemicals, US National Oceanic and Atmospheric Administration, checked Oct 2026
