REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Telangana- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Telangana is a state in the Southern region of India. It has an area of 114,840 km2 and is the twelfth largest state in India. Most of it was part of the princely state of Hyderabad, ruled by the Nizam of Hyderabad during the British Raj, joining the Union of India in 1948. Telangana was separated from Andhra Pradesh as a new 29th state of India, with the city of Hyderabad as its capital. Hyderabad will continue to serve as the joint capital city for Andhra Pradesh and Telangana for a period of not more than ten years. Telangana is situated on the Deccan Plateau, in the central stretch of the eastern seaboard of the Indian Peninsula. It covers 114,800 square kilometers (44,300 sq. mi). The region is drained by two major rivers, with about 79% of the Godavari River catchment area and about 69% of the Krishna River catchment area, but most of the land is arid. Telangana region has rich natural resources. About 45 per cent of the forest area in Andhra Pradesh state is in Telangana region while 20 per cent of the country's coal deposits in the country are also found here. Telangana is also rich in limestone deposits that cater to cement factories. Telangana has other mineral resources like bauxite and mica. Perennial rivers Godavari and Krishna enter Andhra Pradesh in Telangana before flowing down through other regions and ending up in the Bay of Bengal. Telangana region is sitting on potential oil and natural gas reserves, according to a report by Director General of Hydrocarbons (DGH). Telangana has a significant amount of Software export in India. While majority of the Industry is concentrated over Hyderabad, the other cities are also becoming significant IT destinations in the state. Hyderabad's IT exports exceeded $7 billion in 2014.There have been extensive investments in digital infrastructure.

 

AGRICULTURE

Rice is the major food crop and staple food of the state. Other important crops are tobacco, mango, cotton and sugar cane. Agriculture has been the chief source of income for the state's economy. Important rivers of India are the Godavari, Krishna flow through the state, providing irrigation. Telangana agriculture department separated from Andhra Pradesh as part of Andhra Pradesh bifurcation It aims promote agricultural trade and to boost up the agricultural production and productivity in the Telangana.

 

TOURISM IN TELANGANA

Telangana State Tourism Development Corporation (TSTDC) is a state government agency which promotes Tourism in Telangana. Telangana has a variety of tourist attractions including historical places, monuments, forts, water falls, forests and temples. Charminar, Golconda Fort, QutbShahi Tombs, Chowmahalla Palace, Falaknuma Palace and Bhongir Fort, are some of the monuments in the state. The Charminar, built in 1591 CE, is a monument and mosque located in Hyderabad, Telangana, India.

 

DEMOGRAPHIC PROFILE

Telangana with a population of 351.9 lakhs (according to the 2011 census) accounts for about 3.6% percent of the total population of India. Out of this, 177.0 lakhs (50.2%) are males and 174.9 lakhs (49.8%) are females. The sex ratio of the state is 988 as against the national figure of 943. The population density in the state is 307 persons/Sq.Km. In 2012-13, the services sector at Rs.  1, 14,046 crores, contributed 58.1% to the GSDP (at constant prices). It is followed by industry sector, contributing 27.9% (Rs. 54,687 crores) and the agriculture sector’s contribution of 14% (Rs. 27,450 crores). The services sector had fastest growth  of  11.31%  followed  by  industry  sector  (10.04%)  and  agriculture  sector  (6.89%) between 2004-05 and 2012-13.

The Telangana government has proposed to add 230 crore plants in the next three years under a flagship programme which envisages boosting of tree cover in the state by nearly 8%.

 

FOOD AND INDUSTRIAL PROCESSING SECTOR

The Telangana government plans to put greater emphasis on value-addition in the farm sector in its industrial policy. The departments of industry and commerce, agriculture and agro marketing would coordinate together to achieve value maximization for farmers. The government is also keen on encouraging e-marketing activities, which involves networking all agriculture mandis in the state so that farmers get access to prevailing prices across important markets and thereby helping them unlock the right value for their produce. The state in collaboration with research institutes in the country would facilitate an ideal adoption of latest practices ranging from seed technology and farm machinery to improve farm productivity. the state government is also considering specific projects such as setting up a pharmaceutical city near Hyderabad and a cotton hub in Warangal district, the largest producer of long-staple cotton. The Telangana government has begun a survey to identify land that can be offered to new industries in the state. The Telangana government is set to announce its new industrial policy under which scheduled castes and scheduled tribe entrepreneurs would be specially encouraged.

Telangana Government is mulling to set up a 'Pharma City' near the state capital in about 8,000 acres. The City will include industries as well as residential colony, and a power plant with 500 MW capacity will be set up adjacent to the pharma city to provide captive, dedicated and uninterrupted power supply to the industry. The pharma city is expected to accommodate about five lakh employees besides their families in the residential colony touching about twenty lakh over a period. Delegation of Drugs Manufacturers' Association that an international consultancy organisation with expertise in developing in the information technology and pharmaceuticals manufacturing sectors may become backbone of Telangana economy, leaving power production, ports and oil and natural gas to play a pivotal role in driving prosperity in the residuary state. Industrial estates should be contacted to design the pharma city. Telangana's per capita income of Rs 24,409 in 2004-05 has phenomenally grown to a whopping Rs 83,020. While Hyderabad has less number of households using open toilets at 0.9 per cent, Mahabubnagar is at 71.1 per cent. The land-locked state is expected to have nearly Rs 4,000 crore surplus budget, but lingering power deficit may force the new government to spend more on the power purchase. Telangana, spread in 1,14,840 square kilometres, has 66.46 per cent literacy rate with a population of 3.52 crore.

 

ECONOMY OF TELAGANA

The Economy of Telangana is mainly driven by agriculture. Two important rivers of India, the Godavari and Krishna, flow through the state, providing irrigation. Rice, cotton, mango and tobacco are the local crops. Recently, crops used for vegetable oil production such as sunflower and peanuts have gained favour. There are many multi-state irrigation projects in development, including Godavari River Basin Irrigation Projects and NagarjunaSagar Dam, the world's highest masonry dam. Telangana is a mineral-rich state, with coal reserves at SingaerniColleries. The population of Telangana is over 35 million now – much more than 30 million for the whole of Andhra Pradesh, including Telangana, at the time of its formation in 1956. The demands on governance have multiplied over this half a century. Apart from commitment to the development of the region, a smaller state being more easily accessible to the common people can intelligently and speedily grapple with their problems.

 

INDUSTRIAL POLICY FRAMEWORK FOR STATE OF TELANGANA

Industrialization will be the key strategy followed for economic growth and development for Telangana, the 29th state of the country. People of the new state have very high expectations from the Telangana State Government for creating jobs for the youth, promote development of backward areas, maximize growth opportunities by optimum utilization of the available resources, harness the talents and skills of the people etc. The Government of Telangana State realizes that industrial development requires large-scale private sector participation, with the government playing the role of a facilitator and a catalyst. The government is committed to provide a graft-free, hassle-free environment in which the entrepreneurial spirit of local, domestic and international investors will thrive to take up their industrial units in the state of Telangana as the preferred investment destination.

The new Telangana State Industrial Policy will be rooted in certain core values, as follows:

 

                • The Government regulatory framework shall facilitate industrial growth

                • Entrepreneurs will thrive in a peaceful, secure and progressive business regulatory                                        environment

                • Industrial development will lead to massive creation of jobs benefitting local youth

                • Industrialization shall be inclusive and facilitate social equality

 

The new Telangana State Industrial Policy will strive to provide a framework which will not only stabilize and make existing industries more competitive, but also attract and realize new international and national investments in the industrial sector. It is expected that the most significant outcome of this approach will be the production of high quality goods at the most competitive price, which establishes “Made in Telangana-Made in India” as a brand with high global recognition. The Industrial Policy Framework has the following mandate for departments that have any responsibility in the industrialization of the State—Minimum Inspection and Maximum Facilitation.

The Government of Telangana State is determined to create an ecosystem in which the ease of doing business in the state matches and even exceeds the best global standards. Telangana State Government is aware that offering a hassle-free system is considered to be of the highest priority by the industrialists, and accordingly the government will implement a very effective industrial clearance system that will go beyond the traditional single window system.

 

THRUST AREAS AND CORE SECTORS

•             Life Sciences including, bulk drugs, formulations, vaccines, nutraceuticals, biological,   incubation centers, R&D facilities and medical equipment.

•             IT Hardware including bio-medical devices, electronics, cellular communications.

•             Precision engineering, including aviation, aerospace, defence.

•             Food processing and nutrition products including dairy, poultry, meat and fisheries.

•             Automobiles, Transport Vehicles, Auto-components, Tractors and Farm Equipment.

•             Textiles and Apparel, Leather and leather value added products like shoes, purses, bags,         artificial   material infused and coated textiles, paper and paper products.

•             Plastics and Polymers, Chemicals and Petro-chemical, glass and ceramics.

•             FMCG and Domestic Appliances.

•             Engineering and Capital Goods, including castings, foundry and Ferro-alloys and other    metallurgical industries.

•             Waste Management and Green Technologies.

•             Renewable Energy and Solar Parks.

•             Mineral-based and wood-based Industries.

•             Transportation/Logistic Hub/Inland Port/Container Depot.

 

Telangana has emerged as a State that provides that right climate for the growth of IT business and is now one of the most preferred destinations in the Country.

The State of Telangana is poised towards creating a benchmark in Information & Communication Technology (ICT) endowed with a high quality state-of-the-art physical & communication infrastructure of international standards, harnessed human resources, and proactive business friendly policies of the Government.

It is estimated that about 20 lakh acres of land is available in the state that has been identified as unfit for cultivation in Telangana. Based on a detailed survey of these land parcels and identification of those parcels that are fit for industrial use, an industrial land bank for the State of Telangana will be developed.

The development of industrial and related infrastructure will be the responsibility of the Telangana State Industrial Infrastructure Corporation (TSIIC). The financial base of the TSIIC will be strengthened and it will be made to function as an effective organization. All lands in the State identified as fit for industrial use will be transferred to the TSIIC.

To support industrialization, the Government of Telangana will earmark 10% of water from all existing and new irrigation sources for industrial use. Water pipelines will be laid as a part of infrastructure creation for each industrial park by TSIIC. The Government of Telangana State recognizes that quality power and uninterrupted power supply are keys to the growth of the industrial sector. The State has a clear short-, medium-, and long-term plans to first overcome the power shortage and eventually become a power surplus state. Accordingly, uninterrupted power supply will be arranged in each industrial park. The Telangana State Government will encourage usage of non-conventional energy for industrial purposes.

The Telangana State Government is committed to encourage the process of industrialization by making various kinds of incentives available to the entrepreneurs. The Telangana State Government also assures an entrepreneur-friendly and graft-free regime of disbursing the incentives. The Telangana State Government will consider providing incentives to the entrepreneurs in the following areas-

•             Stamp duty reimbursement

•             Land conversion cost

•             Investment subsidy

•             VAT reimbursement

•             Interest subsidy

•             Clean production measures

•             Reimbursement of infrastructure development costs etc.

A sound industrial policy has to ensure that the state taxation structure is conducive to industrial growth and state financial resource augmentation. Distortions in the tax structure leads to evasion of taxes and clandestine transport of industrial inputs and outputs to neighbouring states, which may have advantageous tax rates. The presence of important national and state highways, coupled with the availability of resources and opportunities, provides a great potential for development of industrial corridors in the state along these roadways.

The Industrial Corridors that will be developed initially will be:

 

1) Hyderabad-Warangal Industrial Corridor

2) Hyderabad-Nagpur Industrial Corridor

3) Hyderabad-Bengaluru Industrial Corridor

The new Industrial Policy brought out by the Government of Telangana promises to revolutionise the way industrial sector has been viewed by successive governments in this country. A day is not far when the new Industrial Policy of Telangana will shine as an exemplar among the best in the world.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 238 of 286 | Total 2856 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 238 285 286   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Production Industry of Men’s Undergarment (EOU)

Underwear is a type of clothing that is worn beneath other garments and is frequently worn next to the skin. They help to keep sweat off your gear. They also aid in the formation of the body and provide support for various body parts, as well as keeping the wearer warm in cold conditions. Underwear can be used to protect a person's modesty while still making them look sexy. Some types of undergarments are associated with religious significance. Some items, such as T-shirts and certain types of shorts, are intended to be worn just as underwear, while others, such as T-shirts and certain types of shorts, can be worn as both underwear and outerwear. If the correct fabric is utilised, some types of underwear can be used as nightwear or swimwear. Underwear is one of the most private and personal decisions in menswear because only a few people will see it. It's worn all day, every day, right next to the skin. As a result, while many men prefer one sort of underwear over another, it's more practical to pick a style based on the day's activities. The global men's underwear market is estimated to exceed US$ 16.5 billion in sales by the end of 2027, growing at a CAGR of 5.8% over the forecast period (2020-2027). Because of the rising prevalence of organised retail around the world, the market for men's underwear is expected to grow. The market for men's underwear is expected to grow as disposable income rises and the metrosexual male population spends more on fashionable items. Rising demand for underwear as a need and for comfort is expected to help the men's underwear industry grow. The hosiery industry is a long-standing textile industry with enormous domestic and worldwide market potential. Because of its multiple advantages, the market for hosiery underwear is rising. Cotton underwear is popular among people from all walks of life because of its great absorbency, inexpensive cost, and widespread availability. People wear these foundation garments all year round in a range of weather conditions. The marketing of high-quality knitted underwear is expected to be uncomplicated. Few Indian Major Players 1. Bodycare International Ltd. 2. Dollar Industries Ltd. 3. J C Penney Services India Pvt. Ltd. 4. Seeds Intimate Apparel India Pvt. Ltd. 5. Shakthi Knitting Pvt. Ltd. 6. Triumph International (India) Pvt. Ltd.
Plant capacity: Men's Briefs 10,000 Pcs Per Day Sports Briefs 10,000 Pcs Per Day Men's Boxers 10,000 Pcs Per DayPlant & machinery: Rs. 239 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 1656 Lakhs
Return: 27.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Profitable Business Industry of EV Charging Stations.

Electric vehicle charging station business opportunity is one of the pinnacle business models worldwide. As EVs turn out to be an extra regular on the road, many startups and entrepreneurs are interested in beginning an EV charging station commercial enterprise. With the augmented mindfulness of the environment and the introduction of electric cars (along with e-cars and e-scooters), electric car charging stations are on the list of some top enterprise opportunities in many countries for the last decade. When thinking about an EV charging commercial enterprise version, it’s essential to understand which models will be simplest for the kind of visiting driver and the kind of location/enterprise where the charging stations may be established, in addition to the typical expenses incurred. The method that an entrepreneur or startup takes is important because flexibility and scalability are clearly important for this kind of new and fast-paced industry. The budget of beginning an EV charging station could be very less compared to other business setups. Consequently, the cost of starting EV stations involves only the installation fee which consists of the price of chargers, power, software program, infrastructure, marketing, manpower, and maintenance. Is It Profitable To Start An EV Charging Business? EV charging stations and public charging setup enterprises are some of the finest enterprise opportunities. Even though the client category still predates and relies upon the conventional auto industry, EV vehicle enterprise is the next generation choice. Aside from this, state governments provide extra advantages, like exemption on street tax, registration charges, stamp duty, electricity tax, and many others. It is comprehensible that increased trade of such vehicles will demand an extra number of charging points. The range of electric vehicles running on the roads is significantly greater than the wide variety of EV fee stations at the roads. Market Growth of EV Charging stations In recent years, the demand for electric cars is increasing unexpectedly internationally. Though, China and the USA are keeping the principal market proportion for the same. For the reason that demand for EVs is increasing, hence the electric charging industry is likewise driving. Governments globally are contributing in the direction of putting in the charging stations. For example, the Chinese government authorities have accepted the improvement of fast-charging stations by the national policies. Furthermore, in the USA, the government is presenting all its support and funds to broaden EV charging stations. Such active help through government groups is likely to increase the marketplace for charging stations at some stage in the forecast duration. The worldwide electric automobile Charging Station market is predicted to grow from 27 billion in 2020 to $129.07 billion by 2027, at a CAGR of 10.1%. Elements along with growing demand for energy-efficient commuting, governments associating electric-powered vehicles, and their charging infrastructure through preferential rules, subsidies, and tax rebates have caused a developing call for this section in conjunction with the fact that in the subsequent 2 decades, many governments around the world have introduced plans to phase out fossil gas cars from the market. The Driving Factors One of the most critical elements driving the Electric Vehicle Charging Station marketplace is the growing costs of petroleum merchandise. Customers from developing nations are already laid with the elevated price of petrol. Electrical automobiles operating on electricity will decrease the working value of usage for those cars. Another important thing driving this sector is the reducing fee of EV with the lessening of battery cost which is also causing growth in demand for EV’s and EV charging stations. The electric vehicle charging stations market is predicted to develop with time and rising support from government bodies of various countries. Many nations have found the necessity to go electric to lessen the increasing pollution from motors, with the United States and China already gearing as much as electric cars. China’s swiftly growing economy is using the expansion of superior technologies to improve electrification in the country. China has spent about USD 2.4 billion till year 2020 to enhance the charging facility infrastructure in the nation. Entrepreneur India’s project reports incorporate a unique mix of exact insights and qualitative analysis to assist startups and entrepreneurs reap sustainable growth. The professionals, experienced analysts, and specialists use industry-leading research tools and techniques to collect comprehensive marketplace studies, interspersed with relevant records. The report consists of a competitive view based totally on an in-depth assessment of the important strategies adopted by the main marketplace members within the electric automobile charging stations marketplace over the past few years.AK_20art_21
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start Assembling of Lithium Ion Battery (Battery Assembly)

A lithium-ion battery, often known as a Li-ion battery, is a rechargeable battery in which lithium ions flow via an electrolyte from the negative electrode to the positive electrode during discharge and then back again during charging. A lithium-ion battery's positive electrode is constructed of an intercalated lithium compound, while the negative electrode is commonly graphite. With the exception of LFP cells, lithium-ion batteries have a high energy density, no memory effect, and a low self-discharge rate. Either energy or power density can be emphasised in cells. However, because they contain flammable electrolytes, they can pose a safety risk. Which, if damaged or wrongly charged, can result in explosions and flames. • More Compact Design: Li-ion batteries are smaller and lighter than traditional rechargeable batteries when compared to their capacity, and are thus used in portable consumer electronics devices where weight and form factor are important selling points. • Lower Self-discharge and Longer Shelf Life: While compared to other rechargeable batteries, Li-ion batteries have a lower self-discharge rate of about 1.5 percent per month, allowing for a longer shelf life when not in use due to the slower drain. • Fast Charging: Lithium-ion batteries charge faster than other rechargeable batteries including lead acid, nickel-metal hydride, and nickel-cadmium. • Low Maintenance: Lithium-ion batteries do not need to be maintained in order to function properly. • High Open-Circuit Voltage: Due to their chemistry, Li-ion batteries have a higher open-circuit voltage than other batteries such as lead acid, nickel-metal hydride, and nickel-cadmium. From 2021 to 2030, the global lithium-ion battery market is expected to grow at a CAGR of 12.3%, growing from USD 41.1 billion in 2021 to USD 116.6 billion in 2030. The market's growth can be attributed to increased demand for lithium-ion batteries in electric vehicles (EVs) and grid storage, since they offer high-energy density and lightweight solutions. Due to a growth in the registration of electric vehicles and a decrease in the price of lithium-ion batteries, the market size is predicted to grow throughout the forecast period. Market expansion is predicted to be fueled by an increase in electric vehicle sales as well as a shift in customer preferences. The rising number of solar installations and nuclear power plants, as well as the launch of wind energy projects, are likely to propel market growth over the forecast period. Few Indian Major Players 1. Anand Batteries Ltd. 2. Bharat Electronics Ltd. 3. Carborundum Universal Ltd. 4. Eon Electric Ltd. 5. H B L Power Systems Ltd. 6. Luminous Power Technologies Pvt. Ltd.
Plant capacity: 48 Volt, 60 AH Lithium-Ion Battery Pack 10 Nos per day 48 Volt, 80 AH Lithium-Ion Battery Pack 10 Nos per day 48 Volt, 100 AH Lithium-Ion Battery Pack 10 Nos per day 60 Volt, 20 AH Lithium-Ion Battery Pack 10 Nos per day Plant & machinery: Rs. 165 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 538 Lakhs
Return: 29.00%Break even: 67.00%
Add to Inquiry Add to Inquiry Basket

Opportunities in Waste Lubricating Oil Recycling Plant

Waste oil is mostly made up of hydrocarbons and can be found in both industrial and non-industrial settings. It may contain additives and impurities as a result of physical contamination and chemical reactions that occur during use. Because used oil has been used previously, it has become contaminated with chemical and physical pollutants. Used oil includes transmission oil, motor oil, brake fluid, hydraulic oil, and gearbox oil. Oil that has been used is a recyclable material that can be recycled, reused, or disposed of. Oil is not considered a waste product once it has been used. Lubricating lubricants are commonly used in industries to reduce friction and wear by interposing a thin film of oil between metallic surfaces. Water, salt, dirt, metal scrapings, broken down additive components, varnish, and other impurities may mix with the oil or be generated in it during normal use as a result of thermal breakdown or oxidation. Recycling and reusing wasted oil is preferable to disposing of it, and it can have considerable environmental benefits. Recycled used oil can be refined into new oil, converted into fuel oils, and utilised as a raw material in the petroleum industry. The term "waste oil" describes refined oil that has been delivered for a variety of purposes. Impurities, dirt, and toxins are all present in waste oil. Waste oil is any synthetic or petroleum-based oil that has become contaminated and unfit for its intended function. The main sources of this material are crankcase and lubrication wastes. The method of refining waste oil to generate fuel or lubricating oil is currently employed in various places. Waste oil appears to be harmful to the environment because it is burned or haphazardly dumped into the ground. Government agencies must create efficient recycling and disposal plans in order to refine waste oil. This contributes to environmental protection by reducing illegal waste oil dumping. New waste oil treatment and disposal technologies enable more efficient service while also lowering environmental risk. Few Indian Major Players 1. Asia Refinery Ltd. 2. Bharat Shell Ltd. 3. Castrol India Ltd. 4. Enpro Industries Pvt. Ltd. 5. Fuchs Lubricants India Pvt. Ltd. 6. G P Petroleums Ltd. 7. G S Caltex India Pvt. Ltd. 8. Indian Oil Blending Ltd.
Plant capacity: Used Lubricating Oil 20,000 Ltrs per day Spent Clay as by product 2,105 Ltrs per dayPlant & machinery: Rs. 127 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 753 Lakhs
Return: 27.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Profitable Growing Industry of Medical Disposables (Gowns/Drapes)

Doctors and nurses in the operating room use surgical gowns to prevent the transmission of germs and body fluids from the operating staff to the patient, as well as from the patient to the operating staff. Surgical gowns must meet a variety of well-documented performance requirements. Surgical gowns must be disease and infection resistant while also allowing for sufficient mobility. They must allow for adequate mobility while also preventing rubbing, chafing, ripping, and linting. They should fit snugly but not tightly. Because there is generally excess fabric, the gowns must withstand constant pulls on the fabric during normal motions. A surgical drape is a disposable, non-woven covering that is used to cover a patient's region. The surgeon can perform the surgery through a fenestration (an opening) in the drape. Depending on the type of operation, it comes in a variety of sizes. The drapes in each hospital are different. A 15-square-inch drape with a 3-square-inch fenestration could sufficient for an eye operation, but open heart surgery necessitates the largest drape possible, a laparotomy drape that covers the entire body. Surgical drapes keep the operating area clean and free of bacteria. The adhesive tape must attach securely to both the drape material and the patient's skin in order to accomplish this; its performance cannot be affected by the sterilisation procedure or compromised by pre-operative cleaning chemicals. For Surgical Procedures, Gowns and Drapes The market is predicted to grow at a CAGR of 4.42 percent from 2021 to 2028, from USD 2.28 billion in 2020 to USD 3.23 billion in 2028. The Surgical Drapes and Gowns market is being driven by an increase in surgical operations due to sports injuries, accidents, and heart surgeries due to a greater frequency of cardiovascular disorders and other chronic ailments where surgery is indicated as needed. Surgical gowns and drapes are also in high demand due to increased demand for patient and healthcare worker protection, as well as an increase in the prevalence of surgical site infections. Few Indian Major Players 1. PrimewearHygine (India) Product Ltd. 2. RaajMedisafe India Ltd. 3. Surgeine Healthcare (India) Pvt. Ltd. 4. VikramNuvotech India Pvt. Ltd.
Plant capacity: Medical Gowns 1,250 Pcs Per Day Medical Drapes 1,250 Pcs Per DayPlant & machinery: Rs. 286 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 611 Lakhs
Return: 26.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Manufacturing Industry of Calcium Carbide(CaC2)

The chemical substance calcium carbide, sometimes known as CaC2, has the formula CaC2. There appear to be greyish whitish masses present. Carbide Candles, which are small carbide lamps used to blacken rifle sights and reduce glare, also include calcium carbide. These "candles" are utilised because acetylene produces a sooty flame. Other names for it include calcium acetylide, phenyl glyceryl ether diacetate, and glycerol phenyl ether diacetate. Calcium carbide is an important raw material in the organic synthesis industry. Acetylene, chloroprene rubber, calcium cyanamide, acetate acid, trichloroethylene, and acetaldehyde can be made by mixing acetylene, chloroprene rubber, calcium cyanamide, acetate acid, trichloroethylene, and acetaldehyde with other materials. It can also be used in steel manufacturing as a desulfurizing agent, as well as for metal cutting and welding. Along with calcium phosphide, calcium carbide is used in floating, self-igniting naval signal flares. Calcium carbide has been declared a flammable substance under the Inflammable Substances Act, and the Petroleum Act has been applied to it. When moisture comes into contact with calcium carbide, acetylene gas is produced, which has a wider explosive range. Calcium carbide is used in the following industries: • It's utilised in the production of calcium hydroxide and acetylene. • Because acetylene, a calcium carbide derivative, may be used as a raw material, it is used in the production of polyvinyl chloride (PVC). • It's used to make calcium cyanamide. • It's used to remove sulphur from iron. The process of eliminating sulphur from any material is known as desulphurization. • Similar to ethylene, it is used as a ripening agent. • Both bamboo and big-bang cannons contain it. • It's used as a deoxidizer, which means it helps remove oxygen during the steel-making process. Calcium carbide is a calcium-containing mineral. The market is predicted to grow significantly from 2019 to 2025 due to its metallurgical and chemical uses in sectors such as steel manufacturing, fertiliser, and metal fabrication. Product derivatives are utilised downstream in the automotive, pharmaceutical, and plastics industries, which could help the industry grow. In an electric arc furnace, lime and coke are heated to produce a translucent, colourless inorganic material. The technical grade substance creates an unpleasant garlic-like odour when exposed to trace moisture. Desulfurization and the elimination of unwanted iron oxide are two metallurgical processes that use it. The calcium carbide market is likely to grow further due to its use in integrated steel mill desulfurization. The calcium carbide market is predicted to grow due to its use with calcium phosphide, which is used in floating and self-igniting naval flares for defensive countermeasures, illumination, and signalling. Because calcium flares may be released underwater and illuminate submerged objects, they are commonly employed in maritime applications. The global market for marine safety is estimated to hit USD 35 billion by 2026, favouring market size. Few Indian Major Players 1. D C M Shriram Ltd. 2. K P L International Ltd.
Plant capacity: Calcium Carbide 60 MT Per DayPlant & machinery: Rs. 2127 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 3810 Lakhs
Return: 28.00%Break even: 68.00%
Add to Inquiry Add to Inquiry Basket

Automated Vehicle Scrapping and Recycling Unit

Vehicle recycling is the deconstruction of cars for spare parts. When vehicles reach the end of their useful lives, they have value as a source of replacement components, which has given rise to the car dismantling industry. Wrecking yards, auto dismantling yards, automotive spare parts suppliers, and, more recently, auto or vehicle recycling are all phrases that have been used to characterise the industry's business outlets. Vehicle recycling has long been a component of the process, but manufacturers have become increasingly active in recent years. A car crusher is commonly used to reduce the size of a junk car so that it can be transferred to a steel mill. The "Voluntary Car-Fleet Modernization Program," also known as India's vehicle scrapping programme, intends to usher in a new era of what it means to own and use a car in India. Nitin Gadkari, the Minister of Road Transport and Highways, introduced it in Parliament in March. The programme demands that all automobiles above a certain age be taken off the road in order to achieve higher pollution control and safety, which new vehicles provide. A commercial vehicle over 15 years old or a personal vehicle over 20 years old that fails an automatic fitness test, regardless of whether it runs on diesel or gasoline, is earmarked for scrapping. As a result, automobile recycling is essential. It's also crucial to handle them properly to avoid hazardous waste from being released into the environment. Such vehicles must be disposed of by professionals who are familiar with hazardous chemicals such as fuel, coolants, and brake fluids. Environmental Benefits: Steel is one of the most significant materials in the automobile's construction; it's utilised to make the bulk of the components, including the framework. Because iron ores are required for the production of steel, recycling automobiles contributes to the preservation of iron ores. All waste generated as a by-product of steel processing is avoided as well, guaranteeing that air pollution is not increased. Wildlife Preservation: It's also worth mentioning that proper car recycling can help preserve local flora and fauna. Steel mining is bad for the environment because it produces soil erosion and degradation, which means animals can't keep up with their normal habits and may become unwell as a result. Land erosion causes sediment flow into bodies of water, which has an impact on water quality and wildlife proliferation.
Plant capacity: 1000 Vehicles per MonthPlant & machinery: Rs. 497 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 2090 Lakhs
Return: 29.00%Break even: 40.00%
Add to Inquiry Add to Inquiry Basket

Growing Demand of Animal Feed (Cattle, Poultry Broiler, Pig & Fish Feed)

Animal feed is the food that is supplied to domestic animals, especially livestock, while they are being cared for. The two most prevalent categories are fodder and forage. Feed is commonly referred to as fodder when the word feed is used alone. Animal feed is an important aspect of the animal agricultural process, and it is usually the most expensive part. Farms typically try to save money by growing their own food, grazing their animals, or supplementing expensive feeds with less expensive alternatives, such as food waste from beer production. Feed that delivers a well-balanced diet is critical to animal health. Some modern agricultural practises, such as grain-feeding cows or keeping them in feedlots, are harmful to both the environment and the animals. Increased maize or other grain in cow diets, for example, leads their microbiomes to become more acidic, impairing their immune systems and making cows more likely E.coli vectors. Other feeding practises, on the other hand, may be beneficial to animals. For example, feeding cows particular types of seaweed reduces methane generation, cutting greenhouse gas emissions from the meat industry. The animal feed business is predicted to grow at a CAGR of 4.90 percent from US$345.434 billion in 2020 to US$460.322 billion in 2026. Animal feeds are products that are used to improve the health of animals. Different doses of feed are given depending on the animal. Rapid urbanisation and increased meat and other end-product consumption, such as milk and eggs, in various places will fuel the animal feed market development potential over the forecast period. The feed aids in the expansion of the animal's capacities, accelerating growth and weight gain, and enhancing immunity by giving enriched nutrients with the feedstuff. Few Indian Major Players 1. Annam Feeds Pvt. Ltd. 2. Baramati Agro Ltd. 3. C P Aquaculture (India) Pvt. Ltd. 4. Ekta Agro Inds. Ltd. 5. Grobest Feeds Corpn. (India) Pvt. Ltd. 6. Heritage Nutrivet Ltd. 7. Intercorp Biotech Ltd.
Plant capacity: Cattle Feed 33.6 MT per day Poultry Broiler Feed 16.8 MT per day Fish Feed 2.8 MT per day Pig Feed 2.8 MT per dayPlant & machinery: Rs. 160 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 1488 Lakhs
Return: 24.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Opportunities in Production of Solar Inverter (100 KVA – 1000 KVA)

The variable direct current (DC) output of a photovoltaic (PV) solar panel is converted into a utility frequency alternating current (AC) that can be supplied into a commercial electrical grid or used by a local, off-grid electrical network by a solar inverter, also known as a PV inverter. It is a critical balance of system (BOS) component in a photovoltaic system that facilitates the use of normal AC-powered equipment. Solar power converters have developed features such as maximum power point tracking and anti-islanding prevention for usage with photovoltaic arrays. Advanced solar pumping inverters convert DC voltage from solar panels to AC voltage, allowing submersible pumps to run without the usage of batteries or other energy storage devices. MPPT (maximum power point tracking) is used by solar pumping inverters to monitor output frequency and control the speed of the pumps, preventing damage to the pump motor. Many ports for DC current supplied by PV arrays, one port for AC voltage output, and a third port for input from a water-level sensor are common on solar pumping inverters. The market for solar PV inverters is expected to develop at an annual pace of more than 8%. Reduced electricity consumption and declining economic growth have also had a negative impact on the industry. When global market activity resumes, however, demand for the industry grows at a faster rate. Factors such as decreasing inverter prices and an increase in solar PV installations are projected to boost market growth. The growth of the solar PV inverters market has been aided by technological advancements that have led in cheaper costs and improved efficiency in solar panel manufacturing. However, a lack of general understanding, infrastructure construction costs, and recent subsidy reductions on solar panels by governments in the Asia-Pacific region have all stifled market expansion. Few Indian Major Players 1. Alectrona Energy Pvt. Ltd. 2. Eaton Power Quality Pvt. Ltd. 3. Fuji Electric Consul Neowatt Pvt. Ltd. 4. Microtek International Pvt. Ltd. 5. Redington (India) Ltd. 6. S B J Exports & Mfg. Pvt. Ltd.
Plant capacity: Solar Inverter 50 Hz 100 to 1000 KVA 15 NosPer DayPlant & machinery: Rs. 373 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 1288 Lakhs
Return: 26.00%Break even: 47.00%
Add to Inquiry Add to Inquiry Basket

Azodicarbonamide Using Urea & Hydrazine Hydrate

Azolodicarbonamide, commonly known as ADCA, ADA, or azo(bis)formamide, is a chemical compound with the molecular formula C2H4O2N4. It's a crystalline powder that ranges in colour from yellow to orange-red and has no odour. It's also referred to as a "yoga mat" chemical because of its widespread use in foamed polymers. Biurea is produced in two stages by treating urea with hydrazine. Azoldicarbonamide is most typically employed as a blowing agent in the production of foamed polymers. During the thermal breakdown of azodicarbonamide, nitrogen, carbon monoxide, carbon dioxide, and ammonia gases are formed, and they are trapped in the polymer as bubbles to form a foamed product. Doughs created with ADA-treated flours are more cohesive and dryer than doughs made with chlorine dioxide. These dried doughs are more resistant to absorption, retain more gas, and have better machining properties. Bread baked with ADA-treated flour has a higher loaf volume, a better grain texture, and a better exterior look. Azolodicarbonamide had no influence on the onset of rancidity in flour. Natural or supplemented vitamins are unaffected by Azoldicarbonamide. The global azodicarbonamide market is expected to grow over the forecast period due to rising demand for high-quality plastic and rubber parts for everyday use. It is used in the chemical industry for a variety of purposes, including strengthening, softening, and imparting flexibility to the substance with which it is mixed. It's commonly utilised in the production of foam-based plastics including toys, sports shoes, shoe soles, and floor mats. Azodicarbonamide is a crystalline powder that has a yellow to orange red colour, is odourless, and has a yellow to orange red colour. It's used as a foaming agent, a blowing agent, and a food additive, among other things. Yoga mats, for example, are generally made of rubber and plastic. Bakers utilise it as a commercial whitening conditioner for bread dough as a result. It's used as a blowing agent in plastics, synthetic leather, and other industries. The reaction temperature of pure azodicarbonamide is usually around 200 °C. When used for plastics, leather, and other applications, it has additives that intensify the reaction or allow it to react at lower temperatures. As a food ingredient, it's utilised as a flour bleaching agent and a dough conditioner. As an oxidising agent, it reacts with damp flour. Two further reaction products are semicarbazide and ethyl carbamate. Few Indian Major Players 1. Demaco Polymers Ltd. 2. H P L Additives Ltd. 3. Haryana Polymers Ltd.
Plant capacity: Azodicarbonamide Powder 40 MT Per Day Ammonia 10.6 MT Per Day Hydrochloric Acid (38% Conc.) 20.1 MT Per DayPlant & machinery: Rs. 1951 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 3109 Lakhs
Return: 25.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 238 of 286 | Total 2856 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 238 285 286   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top