Skip to content
WhatsApp us
Request a Quote
How to start

How to Start an Alum Manufacturing Business in India

How to Start Alum Manufacturing
Contents 9 sections
  1. Which alum should you make: aluminium sulphate or potash alum?
  2. How is alum made, step by step?
  3. What machinery does an alum plant need?
  4. How much does an alum plant cost, and what does it earn?
  5. Which licences and approvals does an alum unit need?
  6. Who buys alum, and how do you check demand near your plant?
  7. Where do new alum plants go wrong?
  8. What should you settle before you build an alum plant?
  9. Frequently asked questions

An alum manufacturing business starts with a choice most guides skip: which alum you will make. In Indian trade the word covers aluminium sulphate, in ferric and non-ferric grades, which water works and paper mills buy by the tonne, and potash alum, the clear phitkari crystal sold in smaller lots to pharmacies and textile units. The plant, the approvals and the money all follow from that choice.

Every route works alike: bauxite or aluminium hydroxide is reacted with sulphuric acid, the solution is cleared of iron and solids, and the liquor is concentrated into slabs, flakes or crystals. A government project profile for a small potash alum unit puts the project at ₹24.06 lakh, land and building excluded. Profiles from Niir Project Consultancy Services (NPCS) for aluminium sulphate plants of 10 and 30 tonnes a day show total capital investment of ₹109 lakh and ₹114 lakh. Approvals are the usual factory papers plus consent from the State Pollution Control Board.

Which alum should you make: aluminium sulphate or potash alum?

Three products are sold as alum, each with its own buyers and entry cost.

ProductMain buyersReference project
Non-ferric aluminium sulphateGovernment buyers (the Government e-Marketplace, GeM, lists it against IS 260), paper, water treatment10 tonnes a day, ₹109 lakh total capital investment (NPCS profile)
Ferric alum (alumino-ferric)Paper sizing, water treatment30 tonnes a day, ₹114 lakh (NPCS profile)
Potash alum (phitkari)Pharma, textile mordanting, paper, water treatment₹24.06 lakh, land and building excluded (Khadi and Village Industries Commission (KVIC) project profile)

Choose aluminium sulphate if you can name two or three institutional buyers within a day's truck haul; freight sets your radius. Choose potash alum only if you already have a shelf to sell on, such as a pharmacy chain or a cosmetic maker, because the crystal is a small-volume product that sells on packing and brand. Alum sold as a deodorant stone brings cosmetic rules on top; see our cosmetic manufacturing guide.

How is alum made, step by step?

The KVIC profile for potash alum sets out the chain, and aluminium sulphate routes follow its first four steps.

  1. Wash and crush the bauxite (about 60% alumina, under 3% iron oxide) to 1 inch pieces, then pulverise it to 105 to 110 mesh.
  2. React the powder with 60% sulphuric acid in a lead-lined steel reactor at 105 to 110 °C for 8 to 10 hours, heated by steam.
  3. Settle the liquor. Flaked glue helps solids settle, and black ash or barium sulphide reduces the iron. This step decides whether you can sell a non-ferric grade.
  4. Filter the clear aluminium sulphate solution in a filter press.
  5. Aluminium sulphate route: concentrate until the solution solidifies on cooling, then break or flake it.
  6. Potash alum route: add potassium sulphate solution, concentrate for 8 to 10 hours and mould into crystals.
  7. Dry and bag.

Buying aluminium hydroxide instead of bauxite drops step 1 and most of step 3, because someone else did the refining and you pay for it. Bauxite is also the feedstock for alumina production.

What machinery does an alum plant need?

The KVIC profile lists these items for a plant whose machinery costs ₹17.50 lakh.

MachineWhat it does
Jaw crusherBreaks washed bauxite to about 1 inch
Pulveriser (hammer mill)Grinds the ore to 105-110 mesh
Lead-lined digester with stirrerReacts the powder with sulphuric acid
Acid pumpMoves acid and liquor between vessels
Coal-fired boilerSupplies steam to heat the reactor
Lead-bonded evaporation tanksConcentrate the solution
Stainless steel mixing vesselsCombine potassium sulphate with the solution (potash route)
Jumbo bag packing machineWeighs and bags the product

Add a filter press and a fluid bed dryer to your quotation list if they are missing; both appear in the process and are easy to overlook.

How much does an alum plant cost, and what does it earn?

A small potash alum unit on rented space costs about ₹24 lakh. Aluminium sulphate plants of 10 tonnes a day and above cost over ₹100 lakh.

Reference projectCapacityPlant and machineryTotal investmentReturn
Potash alum, KVIC profile40-60% utilisation₹17.50 lakh₹24.06 lakh (land and building excluded)Profit after tax ₹5.96 lakh in year 1, ₹17.92 lakh in year 5
Non-ferric alum, NPCS profile10 tonnes a day₹19 lakh₹109 lakh44% return, 39% break-even
Ferric alum, NPCS profile30 tonnes a day₹35 lakh₹114 lakh (working capital ₹47 lakh)49.72% return, 39.25% break-even

Read each row on its own: the NPCS figures come from separate reports, which is why 30 tonnes a day costs only slightly more than 10. Break-even is the share of capacity at which the plant stops making a loss.

Your own number moves with the raw material (bauxite or aluminium hydroxide), owning or renting the shed, acid storage and effluent arrangements. NPCS has prepared project reports since 1994, and a lender will still want one built on current quotations for your site.

Which licences and approvals does an alum unit need?

Pollution consent is the slow one, so ask for it before you buy land or machinery. The KVIC profile lists this set.

ApprovalIssued byWhat to know
Udyam registrationMinistry of MSME portalNeeded for MSME loans and schemes
GST registrationGST portalFor business invoices
Factory licenceState factories departmentFor the plant premises
Pollution Control Board consentState Pollution Control BoardAsk which category it assigns an alum unit; that sets inspections and renewals
Fire NOC and trade licenceState fire department, local municipal bodyNeeded before operation
BIS licenceBureau of Indian StandardsBuyer-driven: check the tender for IS 260:2024 (non-ferric) or IS 299:2012 (alumino-ferric)

BIS was still issuing licences under IS 260:2024 in March 2026.

Who buys alum, and how do you check demand near your plant?

Water treatment is the steadiest buyer. On 10 March 2026 the Cabinet extended the Jal Jeevan Mission to December 2028, with about 15.80 crore of 19.36 crore rural households (81.61%) reported to have tap connections. The mission now stresses keeping supply running, and built pipelines need treating daily. The note does not mention treatment chemicals, so read this as a trend, not a forecast.

Paper mills use alum for sizing (see our paper mill guide), and textile units use it as a mordant. To size your market, list the treatment plants, paper mills and dyeing units within a day's haul and ask each which grade it buys, from whom and on what terms. Two buyers willing to trial a lot beat any national figure.

Where do new alum plants go wrong?

  • Iron out of limit: A batch above the buyer's iron limit is a rejected lot. Assay each bauxite lot and test every batch before bagging.
  • Acid and residue: Settled solids and spent liquor need a disposal route the pollution board accepts before you commission.
  • Thin working capital: Bauxite and acid are bought ahead of sales. The ferric profile above carries ₹47 lakh of working capital against ₹35 lakh of machinery.

What should you settle before you build an alum plant?

  1. Pick the product and find one buyer who will test a sample lot.
  2. Get delivered quotes for bauxite and aluminium hydroxide, with an assay.
  3. Ask the Pollution Control Board which category applies, before you commit to a site.
  4. Price the machinery by quotation, including the filter press, dryer and boiler.
  5. Prepare a detailed project report. The PMEGP guidelines of December 2023 ask for a project report, and the scheme period they cover ended in 2025-26, so confirm current limits on the KVIC portal first.

For funding routes, see our guides to startup funding and MSME schemes. An NPCS project report on alum covers the product and its BIS specifications, process, market survey, machinery with suppliers, raw materials, manpower and the financials: project cost, working capital, break-even and cash flow. It follows the format banks usually ask for, though acceptance of any report rests with the lender. See also chemical manufacturing ideas.

Frequently asked questions

Is an alum manufacturing business profitable in India?

It can be, but margin depends on grade, freight and payment terms more than on the product. The NPCS profiles show returns of 44% and 49.72% for aluminium sulphate plants. All assume set utilisation, so test them against buyer quotations.

Can I start an alum business with ₹50,000?

Not as a manufacturer. Even the smallest costed profile is ₹24.06 lakh before land and building. With a few lakh you can only buy alum and pack it, which is a packing and trading business.

Should I make alum from bauxite or aluminium hydroxide?

Bauxite means crushing, grinding and solids to dispose of. Aluminium hydroxide removes those steps, but you pay for the refining. Compare delivered cost per tonne of alumina content, and check each lot's iron.

How much space, power and staff does a small alum unit need?

The KVIC profile assumes about 4,000 sq ft of rented space, 25 kW of power and 9 people.

Diksha Garg

Written by

Diksha GargEntrepreneurship Development and Market Research

Diksha Garg works in entrepreneurship development, industrial operations and market research. She holds a BBA from Rukmini Devi Institute of Advanced Studies and studied at IILM from 2019 to 2021. Her experience includes an executive traineeship at HDFC Bank and a financial analyst internship at Bajaj Allianz. She researches the costs, approvals and market data in these business guides, which are reviewed by NPCS founder Ajay Kumar Gupta.

View profile on LinkedIn

How we write and review

Reviewed by Ajay Kumar Gupta, Founder, Niir Project Consultancy Services (NPCS)

Planning a new manufacturing unit?

NIIR prepares detailed project reports and feasibility studies for new projects. Share your requirement and the team will get in touch.

Call Us WhatsApp