WhatsApp us
Request a Quote

Project reports in Ceramics and Glass

Vitrified Floor Tiles Plant Project Report

Plant cost, press and kiln line, raw materials and five-year profitability for a vitrified tiles plant, with a free sample report PDF you can open now.

Plant capacity
4,700 square metres per day
Total project cost
₹2,472 lakh
Plant and machinery
₹1,222 lakh
Return on investment
17% (Year 3)
Break-even
43% of capacity
Payback period
About 4.2 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a vitrified floor tiles project report?

A vitrified floor tiles project report is a detailed project report (DPR) for a plant that grinds feldspar and clay, presses the powder into tiles and fires them in a roller kiln until the body turns glassy. It sets out the process, machinery, raw materials, market, project cost, finance, five-year projections, DSCR and break-even.

Promoters use it to size the press and kiln line and raise a term loan; bankers use it to judge whether the plant can carry its debt.

Also known as: vitrified tiles manufacturing plant project report, project report on vitrified floor tiles, vitrified tiles business plan, GVT tiles plant DPR.

Vitrified floor tiles manufacturing plant cost in India

Our sample report models one press and one roller kiln making 4,700 square metres of tiles per day, or 15,51,000 square metres a year over 330 working days. Output starts at 60% of capacity and reaches 80% in Year 5, at an ex-factory price of ₹315 per square metre.

Plant and machinery is about half of the project cost. That is typical of tiles, where the kiln, press and spray dryer are large, imported or engineered items and the building must house a long, straight line.

₹2,472 lakhTotal project cost
₹3,420 lakhSales in Year 3
₹412 lakhNet profit in Year 3
1.95Average DSCR
Cost of project (₹ lakh)
Land and site development278.09
Building and civil works608.23
Plant and machinery1,221.84
Other fixed assets98.97
Contingencies91.50
Preliminary and pre-operative57.47
Working capital margin115.74
Total2,471.84
Means of finance (₹ lakh)
Promoter's contribution (25%)617.96
Term loan from bank (75%)1,853.88
Cash credit limit (separate)347.23
Total project cost2,471.84

Term loan at 10.5% with a 6-month moratorium and 72 monthly instalments. The lowest DSCR is 1.73, in Year 2. All figures are illustrative.

Vitrified floor tiles manufacturing process

Vitrified tiles are made by the dry-pressing route: the body is ground wet, dried to granules, pressed, decorated and fired once. The line runs continuously, so a stop at the kiln holds up everything before it.

  1. Wet grinding

    Feldspar, clays and quartz are weighed and ground with water and deflocculant in ball mills to a fine slip, then screened and stored in agitated tanks.

  2. Spray drying

    The slip is sprayed into a hot air chamber and dries to free-flowing granules with about 6% moisture, ready to fill the press dies evenly.

  3. Pressing

    A high-tonnage hydraulic press compacts the granules into green tiles; uneven filling here shows up later as warped or cracked tiles.

  4. Drying

    A vertical or horizontal dryer removes the remaining moisture so tiles do not crack when they meet glaze or kiln heat.

  5. Glazing and printing

    Engobe and glaze are sprayed or poured on, and a digital inkjet printer lays down the design from a file, so a new design needs no screens.

  6. Firing

    Tiles travel on ceramic rollers through a gas-fired kiln at about 1,200°C, where the feldspar melts and fuses the body.

  7. Polishing and squaring

    Polished grades are ground and buffed with abrasive heads, and the edges are squared so tiles lay with thin joints.

  8. Sorting and packing

    Tiles are checked for size, flatness, shade and surface defects, graded and packed in cartons by shade and batch.

Which type of vitrified tile should your plant make?

"Vitrified" covers several products made on similar lines. The type you choose decides the press, decoration and polishing equipment, so it is fixed before machinery is ordered. Our sample report models a glazed line with polishing.

Glazed vitrified tiles (GVT)Vitrified body with a printed glaze; the widest range of looks, from wood to stone, made with a digital printer
Polished glazed (PGVT)GVT with the glaze polished to a high gloss; needs a polishing line and more abrasives
Double chargeTwo layers of coloured powder pressed together, so the pattern runs a few millimetres deep; needs a double-charge press feeder
Full bodySame colour through the whole thickness, so chips hardly show; suits heavy-traffic and commercial floors
Soluble saltDesign printed with salts that soak into the surface before polishing; the simplest and lowest-priced type

Raw materials for vitrified floor tiles

Feldspar is the flux that melts in the kiln and makes the body glassy, so it is the largest purchase. Clays give the green tile its strength at the press, and quartz controls shrinkage. Body minerals are bulky, so freight from the mine often costs as much as the mineral itself.

Raw material cost in Year 3 of the sample report
Raw materialShare of costYear 3 (₹ lakh)
Sodium and potash feldspar34%355.35
Ball clay and china clay28%292.64
Glaze, frit and engobe16%167.22
Quartz and silica sand10%104.51
Digital printing inks8%83.61
Deflocculants and body additives4%41.81
Total100%1,045.14

In the sample, raw materials are 30.6% of sales and packing a further 6.6%.

Machinery for a vitrified tiles plant

The roller kiln and the hydraulic press together take 42% of the machinery budget in our sample. Their size sets the plant's daily output, so every other machine is matched to them.

MachineWhat it doesSample cost (₹ lakh)
Roller kilnFires and vitrifies the tiles268.80
Hydraulic tile pressForms green tiles from granules244.37
Spray dryer with hot air generatorTurns slip into press granules171.06
Glazing line with digital inkjet printerApplies glaze and prints the design171.06
Continuous ball mill and slip tanksGrinds and stores the body slip146.62
Polishing and squaring linePolishes the face, squares the edges109.97
Vertical dryerDries green tiles before glazing73.31
Sorting and packing lineGrades and cartons the tiles36.65
Total plant and machinery1,221.84

Costs are the sample report's estimates. Kiln length, press tonnage and tile size change them, so get current quotations before you finalise.

Manpower, power and fuel for a tile plant

A tile line runs three shifts because the kiln cannot be switched off each night. Power and fuel cost ₹502.67 lakh in Year 3 of our sample, or 14.7% of sales, most of it gas for the kiln and spray dryer.

Staffing in the sample report (Year 1)
CategoryNumberAnnual cost (₹ lakh)
Management, supervision and administration2587.00
Skilled workers and operators59130.98
Semi-skilled and unskilled workers85122.40
Total169340.38

Wages rise 5% a year in the projections. Kiln and press operators are the hardest posts to fill outside tile clusters.

Standards and approvals for a vitrified tiles plant

Product standardIS 15622:2017 for pressed ceramic tiles, which replaced older group standards such as IS 13755
Quality testsIS 13630 series: water absorption, breaking strength and modulus of rupture, surface and deep abrasion, and other tests
Pollution board consentConsent to establish and operate from the State Pollution Control Board; tile making with oil or gas-fired kilns is on the CPCB Orange list
Business registrationUdyam (MSME) registration where eligible, and GST registration
Factory and fireFactory licence and fire safety NOC; rules and thresholds vary by state
Gas and powerNatural gas supply agreement and an industrial power connection sanctioned for the connected load

Standards and categories checked October 2026. Confirm with BIS whether a Quality Control Order applies to your product when you start production.

Market for vitrified floor tiles in India

Vitrified tiles have replaced much of the marble, mosaic and ordinary ceramic tile once used on Indian floors. They absorb very little water, resist stains and come in large formats such as 600 × 1200 mm, which suits both homes and commercial buildings.

Most Indian capacity is in the Morbi cluster in Gujarat. A new plant elsewhere competes on freight, faster supply to local dealers and a design range that suits its region.

  • Tile and sanitaryware dealers
  • Real estate developers and builders
  • Interior and flooring contractors
  • Government and institutional projects
  • Exporters and overseas importers

Where the money is made: the gap between first-grade and lower-grade tiles is large. A plant that keeps shade, size and flatness consistent sells more of its output at the full price.

Mistakes that weaken a vitrified floor tiles project report

  • Taking gas cost as fixed

    Fuel is one of the largest running costs. A report should test a rise in gas price, because it moves profit and DSCR more than most other inputs.

  • Selling every tile at first-grade price

    Every kiln produces some lower grades and rejects. Revenue must use a realistic grade mix, not the price of the best tile.

  • Leaving out polishing losses

    Polished grades lose surface material and use abrasives, water and power. These belong in the cost of a PGVT line.

  • Under-sizing working capital

    In our sample, money owed by dealers is the largest current asset at ₹361.40 lakh in Year 1. Many designs and shades also add to finished stock.

  • Using Morbi prices far from Morbi

    Minerals, glaze and spares cost more away from the cluster. Freight in and out should be priced for your site.

How NPCS helps you plan a vitrified tiles plant

  • Product and capacityChoose GVT, PGVT, double charge or full body, tile sizes and daily output for your market.
  • Line and suppliersMatch press tonnage, kiln length and polishing line, and compare quotations.
  • Bank-ready project reportProjections, DSCR, gas cost sensitivity and working capital in your lender's format.
  • Layout and approvalsPlant layout, gas and power load, and the approvals list for your state.

NPCS's client list shows 31 assignments in ceramics and glass. The NPCS project team has prepared feasibility studies and project reports since 1994 for entrepreneurs, banks and companies.

What's inside the vitrified floor tiles sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

19 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS vitrified floor tiles project reports

These are vitrified floor tiles project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Vitrified Floor Tiles5000 Sq.Mt./Day₹58.68 crore25%45% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

Vitrified Floor Tiles project report: frequently asked questions

How much does it cost to set up a vitrified tiles plant in India?

Our sample report models a single-line plant of 4,700 square metres per day at a total project cost of ₹2,472 lakh, of which plant and machinery is ₹1,222 lakh. Plants with several presses and kilns cost many times more. Land, building, gas connection and the polishing line are the items that move the figure most, so your report prices them for your site.

What raw materials are used to make vitrified tiles?

The body is a mix of sodium and potash feldspar, ball clay, china clay and quartz, ground with water and deflocculants. Glazed tiles also need engobe, glaze, frit and digital printing inks. In our sample report feldspar is the largest item at 34% of raw material cost, followed by ball clay and china clay at 28%.

Which machines are needed for vitrified tile manufacturing?

A vitrified tile line needs ball mills and slip tanks, a spray dryer, a hydraulic tile press, a vertical dryer, a glazing line with a digital inkjet printer, a gas-fired roller kiln, a polishing and squaring line, and sorting and packing equipment. In our sample the roller kiln is the costliest item at ₹268.80 lakh.

Is vitrified tile manufacturing profitable?

In our illustrative sample the plant earns a 17% return on investment in Year 3, breaks even at 43% of capacity and pays back in about 4.2 years, with an average DSCR of 1.95. Real results depend on gas price, the share of first-grade output, design range and how much credit dealers take.

What is the difference between vitrified tiles and ceramic tiles?

Both are pressed from clay-based powder, but vitrified tiles use more feldspar and are fired hotter, so the body fuses into a dense, glassy mass. That gives very low water absorption and higher strength than ordinary ceramic tiles, which makes vitrified tiles the usual choice for floors and ceramic tiles common for walls.

Which BIS standard applies to vitrified floor tiles?

Pressed ceramic tiles, including vitrified floor tiles, are covered by IS 15622:2017, which replaced older standards such as IS 13755. Water absorption, breaking strength and abrasion are tested by the methods in the IS 13630 series. Check with BIS whether a Quality Control Order makes certification compulsory when you start production.

Is the sample report free and can I use it for a loan?

Yes, the sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and lender.

Sources and references

  1. Compendium of Indian Standards on Ceramic Tiles and TestingBureau of Indian Standards, Civil Engineering Department, checked Oct 2026
  2. IS 13755:1993 standard details (withdrawn, superseded by IS 15622)Bureau of Indian Standards, checked Oct 2026
  3. Categorization of industrial sectors under Orange as per CPCB criteriaState Pollution Control Board, Odisha, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different ceramics and glass project?

These are a few of the projects we advise on. NPCS's published client list records 31 ceramics and glass assignments, so tell us what you are planning.

Tell us your project

Recent ceramics and glass assignments

  • Taamaesek Engineering Consortium
    Project Feasibility Report on Lab Grown Diamonds for industrial applicationsChennai, 2026
  • Sharadaa Ceramics P Ltd
    Investment and Project Report on Micro Porous Insulation BoardsChennai, 2026
  • Chandel Agro Industries Private Limited
    Detailed Project Report on Toughened Glass-, 2025
  • UAL Industries Ltd
    Detailed Feasibility Study on Calcium Silicate Insulation BoardKolkata, 2025
  • Ayyoob & Co
    Project Feasibility Report on Producing lab-grown diamonds using advanced technology for IThrissur, 2024
  • Materials Research Development
    Industrial Project Report on Mica from Mica DepositsNigeria, 2023
  • Blastline India Pvt. Ltd
    Detailed Project Report on Silicon Carbide Abrasive Nozzle LinersKochi, 2022
  • Pioneer Panel Products
    Industrial Project Report on Flat GlassRohtak, 2022

Get a vitrified floor tiles project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a Vitrified Floor Tiles Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free vitrified floor tiles sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
Vitrified Floor Tiles sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp