WhatsApp us
Request a Quote

Project reports in Plastic Products

uPVC Profiles for Doors and Windows Manufacturing Project Report

Plant cost, extrusion machinery, PVC compound and five-year profitability for a uPVC profile unit, with a free sample report you can open now.

Plant capacity
2.5 MT per day
Total project cost
₹458 lakh
Plant and machinery
₹234 lakh
Return on investment
14% (Year 3)
Break-even
45% of capacity
Payback period
About 4.6 years

Figures from our illustrative sample report for a typical unit. They show the format of an NPCS report and are not quotes for your project.

What is a upvc profiles for doors and windows project report?

A uPVC profiles for doors and windows project report is a detailed project report (DPR) for a plant that extrudes rigid, lead-free PVC compound into window and door profiles. These are the multi-chamber frame, sash, mullion and bead sections that fabricators weld into finished windows. The report covers formulation, extrusion lines, dies, project cost, means of finance, five-year projections, DSCR and break-even.

Promoters use it to size the extrusion plant and raise a term loan; lenders use it to judge whether the unit can repay from profile sales to fabricators.

Also known as: uPVC profile extrusion project report, uPVC window profile manufacturing business plan, project report on uPVC profiles, DPR for uPVC profile plant.

What a bank checks in a uPVC profiles for doors and windows project report

A credit officer reads a profile extrusion report for resin exposure, die investment and repayment headroom. These are the values in our sample report and why each one gets questioned.

58.6%Raw material share of sales

The PVC compound is most of what you sell. A report showing a much lower share is usually pricing resin too cheaply or profiles too high.

70%PVC resin share of raw material cost

Resin prices move with the petrochemical cycle and import parity. Banks expect a sensitivity case where resin rises and selling prices lag by a quarter.

1.40Average DSCR, lowest 1.23 in Year 2

DSCR is the cash available to repay divided by the loan instalments due. Year 2 is tightest because full instalments start once the moratorium ends.

₹51.53 lakhProfile dies and calibrators

Each profile section needs its own die and calibrator set. Lenders ask which sliding, casement or door series the dies cover and who designed them.

Values are the assumptions in our illustrative sample. Your report uses figures for your capacity, suppliers and market.

How much does a uPVC profile extrusion unit cost?

Cost rises with the number of extrusion lines and, just as much, with the number of profile sections you want to offer. The middle tier is the unit in our sample report; the other two are indicative ranges.

One-line unit

₹1.5–2.5 crore

About 1–1.5 MT per day, one series

  • Extruder, dies and downstream₹90–140 lakh
  • Shed fit-out (rented shed)₹15–30 lakh
  • Working capital margin₹10–20 lakh

MSME term loan, often with CGTMSE cover

Our sample report

Two-series unit

₹458 lakh

2.5 MT per day, 825 MT per year

  • Plant and machinery₹234 lakh
  • Land and building₹145 lakh
  • Working capital margin₹29 lakh

Term loan ₹344 lakh (75%), promoter ₹115 lakh

Multi-line plant

₹8–14 crore

About 6–8 MT per day, 3 or more lines

  • Machinery with compounding₹4.5–7 crore
  • Land and building₹2–4 crore
  • Working capital margin₹0.7–1.2 crore

Term loan, often with CGTMSE cover up to its ceiling

Extrusion is not fabrication: a window fabrication shop buys finished profiles and needs cutting, welding and corner cleaning machines worth a few lakh. This page and the sample cover the plant that makes the profiles, which is a far larger investment.

One-line and multi-line ranges are indicative. Costs vary with die design, line automation, lamination and location.

uPVC profiles for doors and windows plant economics

The sample report models a 2.5 MT per day unit running 330 days a year, starting at 60% capacity and reaching 80% in Year 5. Profiles are sold at ₹1,51,000 per MT, about ₹151 per kg ex-factory, excluding GST.

₹458 lakhTotal project cost
₹872 lakhSales in Year 3
₹64 lakhNet profit in Year 3
1.40Average DSCR
Cost of project (₹ lakh)
Land and site development55.73
Building and civil works89.71
Plant and machinery234.24
Other fixed assets22.56
Contingencies16.20
Preliminary and pre-operative10.46
Working capital margin29.14
Total458.04
Means of finance (₹ lakh)
Promoter's contribution (25%)114.51
Term loan from bank (75%)343.53
Cash credit limit (separate)87.43
Total project cost458.04

Term loan at 10.5% with a 6-month moratorium and 54 monthly instalments. All figures are illustrative.

uPVC profiles for doors and windows manufacturing process

Profiles are made in one continuous line, from powder blend to cut lengths. Output and quality depend on the die and calibrator set more than on the extruder itself.

  1. Dry blending

    Resin and additives are mixed in a hot mixer at about 120°C, then cooled in a cold mixer so the blend flows freely and does not lump.

  2. Extrusion

    A conical twin-screw extruder melts the blend gently and pushes it through a die that forms the multi-chamber section in one pass.

  3. Vacuum calibration

    The soft profile is drawn through vacuum calibrators and water-spray tanks that lock in its outer dimensions as it cools.

  4. Haul-off and cutting

    A caterpillar haul-off pulls the profile at constant speed, and a travelling saw cuts it to lengths of about 6 metres.

  5. Filming and inspection

    Protective film goes on the sight faces, and operators check wall thickness, weight per metre and surface for streaks or sink marks.

  6. Testing and bundling

    Batch samples are tested for heat reversion, impact and welded-corner strength before profiles are bundled and stretch-wrapped.

Raw materials for uPVC window profiles

The formulation decides whether profiles stay white and strong after years in the sun. Rutile titanium dioxide gives UV resistance, and the impact modifier stops profiles cracking when they are cut or screwed in cold weather.

Raw material cost in Year 3 of the sample report
Raw materialShare of costYear 3 (₹ lakh)
Suspension PVC resin (K-67)70%357.76
Impact modifier (CPE)9%46.00
Calcium-zinc stabiliser9%46.00
Titanium dioxide (rutile)6%30.66
Lubricants and processing aids4%20.44
Calcium carbonate filler2%10.22
Total100%511.08

Calcium-zinc replaces lead stabilisers, which IS 17953 does not allow in window profiles.

Machinery for a uPVC profile extrusion plant

The extruder is the largest single item in the sample, but dies and calibrators come next and are the part most often under-budgeted.

MachineWhat it doesSample cost (₹ lakh)
Conical twin-screw profile extruderMelts and pumps the PVC blend79.64
Profile dies and calibratorsShape each frame, sash and bead section51.53
Vacuum calibration and cooling tableHolds dimensions while the profile cools23.42
High-speed hot and cold mixerPrepares the dry blend21.08
Haul-off and cutting unitPulls and cuts profiles to length18.74
Chiller, cooling tower and air compressorCooling water and process air14.06
Vacuum loaders and material conveyingMoves blend from mixer to extruder11.71
Scrap grinder and pulveriserTurns start-up scrap back into powder7.03
Quality testing equipmentImpact, heat reversion and weld tests7.03
Total plant and machinery234.24

Costs are the sample report's estimates for a 2.5 MT per day unit. Get current quotations before you finalise.

Who buys uPVC profiles, and how a new plant competes

Your customer is the fabricator, not the homeowner. Fabricators cut, weld and glaze profiles into windows for apartments, hotels, hospitals and offices. They buy a complete system of frames, sashes, mullions and glazing beads that fit together.

That makes switching suppliers slow. A fabricator who trusts your dimensions, colour and weld strength tends to stay, and one who gets warped or yellowing profiles rarely returns.

  • uPVC window and door fabricators
  • Builders and real estate developers
  • Architects and facade contractors
  • Distributors of window systems
  • Government and institutional housing projects

Where a regional plant wins: profiles are bulky for their weight, so freight from a distant brand adds up. A plant that supplies fabricators within a few hundred kilometres, with short lead times on the sections they use most, can compete with larger names.

BIS standard and licences for a uPVC profile unit

IS 17953:2023 is the Indian standard for uPVC window and door profiles. Build your formulation and in-house tests around it from the first trial run.

Business registrationUdyam (MSME) registration and GST registration
Product standardIS 17953:2023 sets tolerances, mass at least 95% of the declared mass per metre, Vicat softening point of at least 75°C and heat reversion of 2% or less for main profiles
Formulation rulesNo lead or cadmium based additives; recycled uPVC only in the core, fully covered by a coextruded layer at least 0.5 mm thick on visible faces
BIS certificationCompulsory only if a Quality Control Order is notified for the product; check the BIS website before launch
Pollution board consentConsent to establish and operate from the State Pollution Control Board; Punjab's list, for example, places virgin plastic processing in the green category
Factory and powerFactory licence where worker thresholds apply, and an industrial power connection for the extruder, mixer and chiller load

Mistakes that weaken a uPVC profile project report

  • Budgeting one die set for a whole range

    A sliding series, a casement series and a door series each need several sections, and every section needs its own die and calibrator.

  • Ignoring weight per metre

    Running heavier than declared gives resin away on every metre, and running below 95% of declared mass fails IS 17953.

  • Pricing with a lead stabiliser formulation

    Lead-based additives are cheaper but not allowed under IS 17953, so the costing must use calcium-zinc from the start.

  • No allowance for start-up scrap

    Every die change and start-up makes scrap. Without a grinder and a reuse rule, saleable output is lower than the report claims.

  • Treating fabricators as cash buyers

    Most fabricators expect credit. The sample assumes 45 days of receivables; leaving this out shrinks the cash credit limit.

How NPCS helps you set up a uPVC profile plant

  • Series and capacityChoose the profile series and daily output your fabricator market can absorb.
  • Lines, dies and formulationCompare extrusion lines and die sets, and cost a lead-free formulation.
  • Bank-ready project reportProjections, DSCR, resin sensitivity and working capital in the format your lender wants.
  • Layout and approvalsPlant layout, power load and the approvals list for your state.

NPCS's client list records 62 assignments in plastic moulded and extruded products and 4 for uPVC profiles, and NPCS has prepared project reports for entrepreneurs, banks and companies since 1994.

What's inside the upvc profiles for doors and windows sample report

  1. Introduction
  2. Uses and applications
  3. Market potential
  4. Manufacturing process
  5. Raw materials
  6. Plant and machinery
  7. Land, building and utilities
  8. Manpower
  9. Licences and approvals
  10. Project cost and means of finance
  11. Working capital
  12. Projected profitability
  13. Cash flow statement
  14. Projected balance sheet
  15. Depreciation
  16. Term loan repayment
  17. Debt service coverage
  18. Break-even analysis
  19. Financial ratios
  20. Key assumptions
  21. Conclusion
  22. Monthly loan repayment schedule

18 pages, five-year projections, illustrative figures.

Open sample report

Free sample or a report for your project?

What you getFree sampleNPCS report for your project
Capacity and locationTypical unitYour capacity, site and state
FiguresIllustrativeBuilt on current prices and quotations
Machinery suppliers and quotationsNoYes
Market survey for your regionNoYes
Bank or scheme format (PMEGP, term loan)NoYes
Use for a loan applicationNoYes

Real NPCS upvc profiles for doors and windows project reports

These are upvc profiles for doors and windows project reports NPCS has prepared, with the plant capacity, total capital investment, rate of return and break-even worked out in each. Costs have moved since some were written, so we bring any of them up to date for your capacity and location.

Project reportPlant capacityTotal investmentRate of returnBreak-evenAction
Of uPVC Profiles for Doors and WindowsuPVC Profiles 2,000 Kgs Per Day Wood Laminated uPVC Profiles 1,570 Kgs Per Day₹24.1 lakh26%75% Get this report
UPVC Profiles for Doors and Windows8.3 MT/Day₹6.54 crore28%57% Get this report
UPVC Profiles for Doors and Windows8.3 MT/Day₹6.81 crore26%58% Get this report
UPVC Profiles for Doors and Windows8.3 MT/Day₹11.19 crore26%41% Get this report

Figures as worked out in each NPCS report. Total investment includes plant and machinery, land and building, and working capital.

Find other projects that fit your budget Search NPCS project profiles by investment, return and break-even, the same search as our Startup Selector.

What clients say about NPCS

4.7

264 Google reviews, as of 20 Oct 2026

Clients most often mention

  • feasibility reports 18
  • project report 16
  • helpful for startups 15
  • detailed reports 8
Read all reviews on Google
  • Excellent experience with Niir Project Consultancy Services. Their Techno-Economic Feasibility Reports are incredibly detailed and backed by solid market data.

    Piyush Singh, Google review, 2026

  • Niir Project Consultancy Services offers excellent guidance for business setup. Their market survey and feasibility reports saved us a lot of time and helped us make informed decisions. Highly recommended

    Saroj Yadav, Google review, 2026 View on Google

  • In an era of information overload, NIIR stands out for its precision. Their technical consultancy and market feasibility studies are world-class.

    Shrishti Gautam, Google review, 2026

  • NIIR Project Consultancy Services provides useful books and reports for students, entrepreneurs, and small businesses. Their content is easy to understand and focuses on practical ideas for starting and managing industries. Overall, NIIR is helpful for learning about business and project planning.

    Raj Yadav, Google review, 2026

uPVC Profiles for Doors and Windows project report: frequently asked questions

What is the uPVC profiles for doors and windows manufacturing plant cost in India?

A one-line unit making about 1–1.5 MT per day needs roughly ₹1.5–2.5 crore, and a three-line plant of 6–8 MT per day about ₹8–14 crore. Our sample report models a 2.5 MT per day unit at ₹458 lakh, including land, building and working capital margin. These are indicative figures; the cost for your plant depends on the dies, automation and location you choose.

What raw materials are used to make uPVC window profiles?

Suspension PVC resin is the base, blended with a calcium-zinc stabiliser, an impact modifier such as CPE, rutile titanium dioxide for UV resistance, lubricants and a little calcium carbonate. In our sample report PVC resin is 70% of raw material cost. IS 17953 does not allow lead or cadmium based additives in these profiles.

Is uPVC profile manufacturing profitable?

It can be, at the right scale. In our illustrative sample a 2.5 MT per day unit earns a 14% return on investment in Year 3. It breaks even at 45% of capacity and pays back in about 4.6 years. Margins depend mostly on resin buying, scrap control, weight per metre discipline and how quickly fabricators pay. Treat these as sample figures, not a forecast for your plant.

Is there a BIS standard for uPVC window and door profiles?

Yes. IS 17953:2023 covers uPVC profiles for windows and doors. It sets dimensional tolerances, minimum mass per metre, Vicat softening point, heat reversion, impact, weld strength and colour stability, and bans lead and cadmium based additives. BIS certification becomes compulsory only if a Quality Control Order is notified, so check the BIS site before you launch.

Can I get a PMEGP or Mudra loan for a uPVC profile extrusion unit?

Usually not for the full plant. PMEGP covers manufacturing projects up to ₹50 lakh and Mudra loans go up to ₹20 lakh under Tarun Plus, while even a small extrusion line costs more. Profile plants normally take an MSME term loan, and CGTMSE guarantee cover of up to ₹10 crore can reduce the collateral the bank asks for.

uPVC profile ka business kaise shuru kare?

Start by choosing the profile series you will sell, such as sliding and casement, and the capacity your region can absorb. Then get die and extruder quotations, fix a lead-free formulation, find land with enough power, and prepare a bank-format project report. Line up a few fabricators before production starts, because they are your main buyers.

Is the sample report free and can I use it for a loan?

The sample is free to view and download. It is an illustrative report that shows the format and depth of an NPCS report; its figures are representative and not based on a real project, so it should not be submitted to a bank. For a loan, NPCS prepares a report for your own capacity, location and loan scheme.

Sources and references

  1. IS 17953:2023 uPVC Profiles for Windows and Doors, SpecificationBureau of Indian Standards, checked Oct 2026
  2. Prime Minister Employment Generation ProgrammeBank of India, checked Oct 2026
  3. PMEGP scheme detailsMSME Department, Government of Uttar Pradesh, checked Oct 2026
  4. Credit Guarantee Fund Trust for Micro and Small EnterprisesCGTMSE, checked Oct 2026
  5. Mudra loan limit raised to ₹20 lakh (Tarun Plus)Press Information Bureau, Government of India, checked Oct 2026
  6. Green category industriesPunjab Pollution Control Board, checked Oct 2026
Ajay Kumar Gupta, founder of NPCS

Who prepares NPCS reports

The NPCS project team, led by Ajay Kumar Gupta

This page and its sample report are prepared and reviewed by the NPCS project team, which has written techno-economic feasibility studies and detailed project reports since 1994.

Ajay Kumar Gupta founded Niir Project Consultancy Services (NPCS) and leads the organisation. With 40 years of experience in MSME project consulting, he has built the team that has delivered more than 28,000 project reports for clients worldwide, helping entrepreneurs plan and finance profitable manufacturing businesses.

Ajay Kumar Gupta on LinkedIn

Published
Last updated
Next review
Oct 2027
Reviewed by
NPCS project team

This page is reviewed every 12 months, or sooner when scheme limits, GST rates, BIS rules or pollution categories change. The sample report is illustrative: its figures are generated from industry-typical ratios for a unit of this size, checked so every statement balances, and are not taken from any client project.

Planning a different plastic products project?

These are a few of the projects we advise on. NPCS's published client list records 62 plastic products assignments, so tell us what you are planning.

Tell us your project

Recent plastic products assignments

  • Epseca
    Project Report on Expanded PolystyreneKenya, 2026
  • Vensar Constructions Company Limited
    Investment and Project Report on HDPE PipesBhopal, 2025
  • Kathir Eco Green Ventures Pvt. Ltd
    Technical and Financial Feasibility Report on Biodegradable Plastic Bags from Corn StarchNew Delhi, 2023
  • Brian McCormick
    Biodegradable Plastics and Polymers (Recent DevelopmentsUnited States, 2023
  • Bevel Technologies-He International JV (BT-HI JV)
    Techno-Economic Project Study on Fishing Nets to PelletBangladesh, 2023
  • Sar Denim Pvt Ltd
    Technical and Financial Feasibility Report on Bio-Degradable Plastic PolymerAnantapur, 2022
  • B.R. Capital Pvt. Ltd
    Techno-Economic Project Report on Double Wall Corrugated PipesKolkata, 2022
  • Ayasya Infrastructure LLP
    Pre-Feasibility Report on Recycled Polyester Fiber from Used PET BottlesMalkajgiri, 2022

Get a upvc profiles for doors and windows project report for your plant

Tell us your planned capacity, location and loan scheme. Our team will confirm the scope and price of a report built on current machinery quotations and raw material prices for your region.

Reports are prepared in the format banks and PMEGP offices ask for, with five-year projections, DSCR and break-even.

Request a uPVC Profiles for Doors and Windows Project Report

Share your plan and our team will call you back within 24 hours.

Start with the sample, then plan your own unit

Open the free upvc profiles for doors and windows sample report to see the format, then talk to NPCS about a report for your capacity and location.

Sample PDF WhatsApp
uPVC Profiles for Doors and Windows sample project report (illustrative) Download New tab

Illustrative sample. Figures are representative and not from a real project.

Call Us WhatsApp